/* * HPMC (High Priority Machine Check) handler. * * Copyright (C) 1999 Philipp Rumpf <prumpf@tux.org> * Copyright (C) 1999 Hewlett-Packard (Frank Rowand) * Copyright (C) 2000 Hewlett-Packard (John Marvin) * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2, or (at your option) * any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ /* * This HPMC handler retrieves the HPMC pim data, resets IO and * returns to the default trap handler with code set to 1 (HPMC). * The default trap handler calls handle interruption, which * does a stack and register dump. This at least allows kernel * developers to get back to C code in virtual mode, where they * have the option to examine and print values from memory that * would help in debugging an HPMC caused by a software bug. * * There is more to do here: * * 1) On MP systems we need to synchronize processors * before calling pdc/iodc. * 2) We should be checking the system state and not * returning to the fault handler if things are really * bad. * */ .level 1.1 .data #include <asm/assembly.h> #include <asm/pdc.h> #include <linux/linkage.h> /* * stack for os_hpmc, the HPMC handler. * buffer for IODC procedures (for the HPMC handler). * * IODC requires 7K byte stack. That leaves 1K byte for os_hpmc. */ .align 4096 hpmc_stack: .block 16384 #define HPMC_IODC_BUF_SIZE 0x8000 .align 4096 hpmc_iodc_buf: .block HPMC_IODC_BUF_SIZE .align 8 hpmc_raddr: .block 128 #define HPMC_PIM_DATA_SIZE 896 /* Enough to hold all architected 2.0 state */ .align 8 ENTRY(hpmc_pim_data) .block HPMC_PIM_DATA_SIZE END(hpmc_pim_data) .text .import intr_save, code ENTRY(os_hpmc) .os_hpmc: /* * registers modified: * * Using callee saves registers without saving them. The * original values are in the pim dump if we need them. * * r2 (rp) return pointer * r3 address of PDCE_PROC * r4 scratch * r5 scratch * r23 (arg3) procedure arg * r24 (arg2) procedure arg * r25 (arg1) procedure arg * r26 (arg0) procedure arg * r30 (sp) stack pointer * * registers read: * * r26 contains address of PDCE_PROC on entry * r28 (ret0) return value from procedure */ copy arg0, %r3 /* save address of PDCE_PROC */ /* * disable nested HPMCs * * Increment os_hpmc checksum to invalidate it. * Do this before turning the PSW M bit off. */ mfctl %cr14, %r4 ldw 52(%r4),%r5 addi 1,%r5,%r5 stw %r5,52(%r4) /* MP_FIXME: synchronize all processors. */ /* Setup stack pointer. */ load32 PA(hpmc_stack),sp ldo 128(sp),sp /* leave room for arguments */ /* * Most PDC routines require that the M bit be off. * So turn on the Q bit and turn off the M bit. */ ldo 8(%r0),%r4 /* PSW Q on, PSW M off */ mtctl %r4,ipsw mtctl %r0,pcsq mtctl %r0,pcsq load32 PA(os_hpmc_1),%r4 mtctl %r4,pcoq ldo 4(%r4),%r4 mtctl %r4,pcoq rfi nop os_hpmc_1: /* Call PDC_PIM to get HPMC pim info */ /* * Note that on some newer boxes, PDC_PIM must be called * before PDC_IO if you want IO to be reset. PDC_PIM sets * a flag that PDC_IO examines. */ ldo PDC_PIM(%r0), arg0 ldo PDC_PIM_HPMC(%r0),arg1 /* Transfer HPMC data */ load32 PA(hpmc_raddr),arg2 load32 PA(hpmc_pim_data),arg3 load32 HPMC_PIM_DATA_SIZE,%r4 stw %r4,-52(sp) ldil L%PA(os_hpmc_2), rp bv (r3) /* call pdce_proc */ ldo R%PA(os_hpmc_2)(rp), rp os_hpmc_2: comib,<> 0,ret0, os_hpmc_fail /* Reset IO by calling the hversion dependent PDC_IO routine */ ldo PDC_IO(%r0),arg0 ldo 0(%r0),arg1 /* log IO errors */ ldo 0(%r0),arg2 /* reserved */ ldo 0(%r0),arg3 /* reserved */ stw %r0,-52(sp) /* reserved */ ldil L%PA(os_hpmc_3),rp bv (%r3) /* call pdce_proc */ ldo R%PA(os_hpmc_3)(rp),rp os_hpmc_3: /* FIXME? Check for errors from PDC_IO (-1 might be OK) */ /* * Initialize the IODC console device (HPA,SPA, path etc. * are stored on page 0. */ /* * Load IODC into hpmc_iodc_buf by calling PDC_IODC. * Note that PDC_IODC handles flushing the appropriate * data and instruction cache lines. */ ldo PDC_IODC(%r0),arg0 ldo PDC_IODC_READ(%r0),arg1 load32 PA(hpmc_raddr),arg2 ldw BOOT_CONSOLE_HPA_OFFSET(%r0),arg3 /* console hpa */ ldo PDC_IODC_RI_INIT(%r0),%r4 stw %r4,-52(sp) load32 PA(hpmc_iodc_buf),%r4 stw %r4,-56(sp) load32 HPMC_IODC_BUF_SIZE,%r4 stw %r4,-60(sp) ldil L%PA(os_hpmc_4),rp bv (%r3) /* call pdce_proc */ ldo R%PA(os_hpmc_4)(rp),rp os_hpmc_4: comib,<> 0,ret0,os_hpmc_fail /* Call the entry init (just loaded by PDC_IODC) */ ldw BOOT_CONSOLE_HPA_OFFSET(%r0),arg0 /* console hpa */ ldo ENTRY_INIT_MOD_DEV(%r0), arg1 ldw BOOT_CONSOLE_SPA_OFFSET(%r0),arg2 /* console spa */ depi 0,31,11,arg2 /* clear bits 21-31 */ ldo BOOT_CONSOLE_PATH_OFFSET(%r0),arg3 /* console path */ load32 PA(hpmc_raddr),%r4 stw %r4, -52(sp) stw %r0, -56(sp) /* HV */ stw %r0, -60(sp) /* HV */ stw %r0, -64(sp) /* HV */ stw %r0, -68(sp) /* lang, must be zero */ load32 PA(hpmc_iodc_buf),%r5 ldil L%PA(os_hpmc_5),rp bv (%r5) ldo R%PA(os_hpmc_5)(rp),rp os_hpmc_5: comib,<> 0,ret0,os_hpmc_fail /* Prepare to call intr_save */ /* * Load kernel page directory (load into user also, since * we don't intend to ever return to user land anyway) */ load32 PA(swapper_pg_dir),%r4 mtctl %r4,%cr24 /* Initialize kernel root pointer */ mtctl %r4,%cr25 /* Initialize user root pointer */ /* Clear sr4-sr7 */ mtsp %r0, %sr4 mtsp %r0, %sr5 mtsp %r0, %sr6 mtsp %r0, %sr7 tovirt_r1 %r30 /* make sp virtual */ rsm 8,%r0 /* Clear Q bit */ ldi 1,%r8 /* Set trap code to "1" for HPMC */ load32 PA(intr_save),%r1 be 0(%sr7,%r1) nop os_hpmc_fail: /* * Reset the system * * Some systems may lockup from a broadcast reset, so try the * hversion PDC_BROADCAST_RESET() first. * MP_FIXME: reset all processors if more than one central bus. */ /* PDC_BROADCAST_RESET() */ ldo PDC_BROADCAST_RESET(%r0),arg0 ldo 0(%r0),arg1 /* do reset */ ldil L%PA(os_hpmc_6),rp bv (%r3) /* call pdce_proc */ ldo R%PA(os_hpmc_6)(rp),rp os_hpmc_6: /* * possible return values: * -1 non-existent procedure * -2 non-existent option * -16 unaligned stack * * If call returned, do a broadcast reset. */ ldil L%0xfffc0000,%r4 /* IO_BROADCAST */ ldo 5(%r0),%r5 stw %r5,48(%r4) /* CMD_RESET to IO_COMMAND offset */ b . nop ENDPROC(os_hpmc) .os_hpmc_end: nop .data .align 4 .export os_hpmc_size os_hpmc_size: .word .os_hpmc_end-.os_hpmc