/* * arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c * * Marvell Orion-VoIP FXO Reference Design Setup * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any * warranty of any kind, whether express or implied. */ #include <linux/gpio.h> #include <linux/kernel.h> #include <linux/init.h> #include <linux/platform_device.h> #include <linux/pci.h> #include <linux/irq.h> #include <linux/mtd/physmap.h> #include <linux/mv643xx_eth.h> #include <linux/ethtool.h> #include <net/dsa.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/pci.h> #include <mach/orion5x.h> #include "common.h" #include "mpp.h" /***************************************************************************** * RD-88F5181L FXO Info ****************************************************************************/ /* * 8M NOR flash Device bus boot chip select */ #define RD88F5181L_FXO_NOR_BOOT_BASE 0xff800000 #define RD88F5181L_FXO_NOR_BOOT_SIZE SZ_8M /***************************************************************************** * 8M NOR Flash on Device bus Boot chip select ****************************************************************************/ static struct physmap_flash_data rd88f5181l_fxo_nor_boot_flash_data = { .width = 1, }; static struct resource rd88f5181l_fxo_nor_boot_flash_resource = { .flags = IORESOURCE_MEM, .start = RD88F5181L_FXO_NOR_BOOT_BASE, .end = RD88F5181L_FXO_NOR_BOOT_BASE + RD88F5181L_FXO_NOR_BOOT_SIZE - 1, }; static struct platform_device rd88f5181l_fxo_nor_boot_flash = { .name = "physmap-flash", .id = 0, .dev = { .platform_data = &rd88f5181l_fxo_nor_boot_flash_data, }, .num_resources = 1, .resource = &rd88f5181l_fxo_nor_boot_flash_resource, }; /***************************************************************************** * General Setup ****************************************************************************/ static unsigned int rd88f5181l_fxo_mpp_modes[] __initdata = { MPP0_GPIO, /* LED1 CardBus LED (front panel) */ MPP1_GPIO, /* PCI_intA */ MPP2_GPIO, /* Hard Reset / Factory Init*/ MPP3_GPIO, /* FXS or DAA select */ MPP4_GPIO, /* LED6 - phone LED (front panel) */ MPP5_GPIO, /* LED5 - phone LED (front panel) */ MPP6_PCI_CLK, /* CPU PCI refclk */ MPP7_PCI_CLK, /* PCI/PCIe refclk */ MPP8_GPIO, /* CardBus reset */ MPP9_GPIO, /* GE_RXERR */ MPP10_GPIO, /* LED2 MiniPCI LED (front panel) */ MPP11_GPIO, /* Lifeline control */ MPP12_GIGE, /* GE_TXD[4] */ MPP13_GIGE, /* GE_TXD[5] */ MPP14_GIGE, /* GE_TXD[6] */ MPP15_GIGE, /* GE_TXD[7] */ MPP16_GIGE, /* GE_RXD[4] */ MPP17_GIGE, /* GE_RXD[5] */ MPP18_GIGE, /* GE_RXD[6] */ MPP19_GIGE, /* GE_RXD[7] */ 0, }; static struct mv643xx_eth_platform_data rd88f5181l_fxo_eth_data = { .phy_addr = MV643XX_ETH_PHY_NONE, .speed = SPEED_1000, .duplex = DUPLEX_FULL, }; static struct dsa_chip_data rd88f5181l_fxo_switch_chip_data = { .port_names[0] = "lan2", .port_names[1] = "lan1", .port_names[2] = "wan", .port_names[3] = "cpu", .port_names[5] = "lan4", .port_names[7] = "lan3", }; static struct dsa_platform_data rd88f5181l_fxo_switch_plat_data = { .nr_chips = 1, .chip = &rd88f5181l_fxo_switch_chip_data, }; static void __init rd88f5181l_fxo_init(void) { /* * Setup basic Orion functions. Need to be called early. */ orion5x_init(); orion5x_mpp_conf(rd88f5181l_fxo_mpp_modes); /* * Configure peripherals. */ orion5x_ehci0_init(); orion5x_eth_init(&rd88f5181l_fxo_eth_data); orion5x_eth_switch_init(&rd88f5181l_fxo_switch_plat_data, NO_IRQ); orion5x_uart0_init(); mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_BOOT_TARGET, ORION_MBUS_DEVBUS_BOOT_ATTR, RD88F5181L_FXO_NOR_BOOT_BASE, RD88F5181L_FXO_NOR_BOOT_SIZE); platform_device_register(&rd88f5181l_fxo_nor_boot_flash); } static int __init rd88f5181l_fxo_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) { int irq; /* * Check for devices with hard-wired IRQs. */ irq = orion5x_pci_map_irq(dev, slot, pin); if (irq != -1) return irq; /* * Mini-PCI / Cardbus slot. */ return gpio_to_irq(1); } static struct hw_pci rd88f5181l_fxo_pci __initdata = { .nr_controllers = 2, .setup = orion5x_pci_sys_setup, .scan = orion5x_pci_sys_scan_bus, .map_irq = rd88f5181l_fxo_pci_map_irq, }; static int __init rd88f5181l_fxo_pci_init(void) { if (machine_is_rd88f5181l_fxo()) { orion5x_pci_set_cardbus_mode(); pci_common_init(&rd88f5181l_fxo_pci); } return 0; } subsys_initcall(rd88f5181l_fxo_pci_init); MACHINE_START(RD88F5181L_FXO, "Marvell Orion-VoIP FXO Reference Design") /* Maintainer: Nicolas Pitre <nico@marvell.com> */ .atag_offset = 0x100, .init_machine = rd88f5181l_fxo_init, .map_io = orion5x_map_io, .init_early = orion5x_init_early, .init_irq = orion5x_init_irq, .init_time = orion5x_timer_init, .fixup = tag_fixup_mem32, .restart = orion5x_restart, MACHINE_END