/* * Copyright (C) 2009 Ilya Yanok, Emcraft Systems Ltd, <yanok@emcraft.com> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. */ #include <linux/types.h> #include <linux/init.h> #include <linux/kernel.h> #include <linux/memory.h> #include <linux/platform_device.h> #include <linux/mtd/physmap.h> #include <linux/mtd/nand.h> #include <linux/gpio.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/time.h> #include <asm/mach/map.h> #include <asm/page.h> #include <asm/setup.h> #include "common.h" #include "devices-imx31.h" #include "hardware.h" #include "iomux-mx3.h" /* FPGA defines */ #define QONG_FPGA_VERSION(major, minor, rev) \ (((major & 0xF) << 12) | ((minor & 0xF) << 8) | (rev & 0xFF)) #define QONG_FPGA_BASEADDR MX31_CS1_BASE_ADDR #define QONG_FPGA_PERIPH_SIZE (1 << 24) #define QONG_FPGA_CTRL_BASEADDR QONG_FPGA_BASEADDR #define QONG_FPGA_CTRL_SIZE 0x10 /* FPGA control registers */ #define QONG_FPGA_CTRL_VERSION 0x00 #define QONG_DNET_ID 1 #define QONG_DNET_BASEADDR \ (QONG_FPGA_BASEADDR + QONG_DNET_ID * QONG_FPGA_PERIPH_SIZE) #define QONG_DNET_SIZE 0x00001000 static const struct imxuart_platform_data uart_pdata __initconst = { .flags = IMXUART_HAVE_RTSCTS, }; static int uart_pins[] = { MX31_PIN_CTS1__CTS1, MX31_PIN_RTS1__RTS1, MX31_PIN_TXD1__TXD1, MX31_PIN_RXD1__RXD1 }; static inline void __init mxc_init_imx_uart(void) { mxc_iomux_setup_multiple_pins(uart_pins, ARRAY_SIZE(uart_pins), "uart-0"); imx31_add_imx_uart0(&uart_pdata); } static struct resource dnet_resources[] = { { .name = "dnet-memory", .start = QONG_DNET_BASEADDR, .end = QONG_DNET_BASEADDR + QONG_DNET_SIZE - 1, .flags = IORESOURCE_MEM, }, { /* irq number is run-time assigned */ .flags = IORESOURCE_IRQ, }, }; static struct platform_device dnet_device = { .name = "dnet", .id = -1, .num_resources = ARRAY_SIZE(dnet_resources), .resource = dnet_resources, }; static int __init qong_init_dnet(void) { int ret; dnet_resources[1].start = gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_DTR_DCE1)); dnet_resources[1].end = gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_DTR_DCE1)); ret = platform_device_register(&dnet_device); return ret; } /* MTD NOR flash */ static struct physmap_flash_data qong_flash_data = { .width = 2, }; static struct resource qong_flash_resource = { .start = MX31_CS0_BASE_ADDR, .end = MX31_CS0_BASE_ADDR + SZ_128M - 1, .flags = IORESOURCE_MEM, }; static struct platform_device qong_nor_mtd_device = { .name = "physmap-flash", .id = 0, .dev = { .platform_data = &qong_flash_data, }, .resource = &qong_flash_resource, .num_resources = 1, }; static void qong_init_nor_mtd(void) { (void)platform_device_register(&qong_nor_mtd_device); } /* * Hardware specific access to control-lines */ static void qong_nand_cmd_ctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl) { struct nand_chip *nand_chip = mtd->priv; if (cmd == NAND_CMD_NONE) return; if (ctrl & NAND_CLE) writeb(cmd, nand_chip->IO_ADDR_W + (1 << 24)); else writeb(cmd, nand_chip->IO_ADDR_W + (1 << 23)); } /* * Read the Device Ready pin. */ static int qong_nand_device_ready(struct mtd_info *mtd) { return gpio_get_value(IOMUX_TO_GPIO(MX31_PIN_NFRB)); } static void qong_nand_select_chip(struct mtd_info *mtd, int chip) { if (chip >= 0) gpio_set_value(IOMUX_TO_GPIO(MX31_PIN_NFCE_B), 0); else gpio_set_value(IOMUX_TO_GPIO(MX31_PIN_NFCE_B), 1); } static struct platform_nand_data qong_nand_data = { .chip = { .nr_chips = 1, .chip_delay = 20, .options = 0, }, .ctrl = { .cmd_ctrl = qong_nand_cmd_ctrl, .dev_ready = qong_nand_device_ready, .select_chip = qong_nand_select_chip, } }; static struct resource qong_nand_resource = { .start = MX31_CS3_BASE_ADDR, .end = MX31_CS3_BASE_ADDR + SZ_32M - 1, .flags = IORESOURCE_MEM, }; static struct platform_device qong_nand_device = { .name = "gen_nand", .id = -1, .dev = { .platform_data = &qong_nand_data, }, .num_resources = 1, .resource = &qong_nand_resource, }; static void __init qong_init_nand_mtd(void) { /* init CS */ __raw_writel(0x00004f00, MX31_IO_ADDRESS(MX31_WEIM_CSCRxU(3))); __raw_writel(0x20013b31, MX31_IO_ADDRESS(MX31_WEIM_CSCRxL(3))); __raw_writel(0x00020800, MX31_IO_ADDRESS(MX31_WEIM_CSCRxA(3))); mxc_iomux_set_gpr(MUX_SDCTL_CSD1_SEL, true); /* enable pin */ mxc_iomux_mode(IOMUX_MODE(MX31_PIN_NFCE_B, IOMUX_CONFIG_GPIO)); if (!gpio_request(IOMUX_TO_GPIO(MX31_PIN_NFCE_B), "nand_enable")) gpio_direction_output(IOMUX_TO_GPIO(MX31_PIN_NFCE_B), 0); /* ready/busy pin */ mxc_iomux_mode(IOMUX_MODE(MX31_PIN_NFRB, IOMUX_CONFIG_GPIO)); if (!gpio_request(IOMUX_TO_GPIO(MX31_PIN_NFRB), "nand_rdy")) gpio_direction_input(IOMUX_TO_GPIO(MX31_PIN_NFRB)); /* write protect pin */ mxc_iomux_mode(IOMUX_MODE(MX31_PIN_NFWP_B, IOMUX_CONFIG_GPIO)); if (!gpio_request(IOMUX_TO_GPIO(MX31_PIN_NFWP_B), "nand_wp")) gpio_direction_input(IOMUX_TO_GPIO(MX31_PIN_NFWP_B)); platform_device_register(&qong_nand_device); } static void __init qong_init_fpga(void) { void __iomem *regs; u32 fpga_ver; regs = ioremap(QONG_FPGA_CTRL_BASEADDR, QONG_FPGA_CTRL_SIZE); if (!regs) { printk(KERN_ERR "%s: failed to map registers, aborting.\n", __func__); return; } fpga_ver = readl(regs + QONG_FPGA_CTRL_VERSION); iounmap(regs); printk(KERN_INFO "Qong FPGA version %d.%d.%d\n", (fpga_ver & 0xF000) >> 12, (fpga_ver & 0x0F00) >> 8, fpga_ver & 0x00FF); if (fpga_ver < QONG_FPGA_VERSION(0, 8, 7)) { printk(KERN_ERR "qong: Unexpected FPGA version, FPGA-based " "devices won't be registered!\n"); return; } /* register FPGA-based devices */ qong_init_nand_mtd(); qong_init_dnet(); } /* * Board specific initialization. */ static void __init qong_init(void) { imx31_soc_init(); mxc_init_imx_uart(); qong_init_nor_mtd(); qong_init_fpga(); imx31_add_imx2_wdt(); } static void __init qong_timer_init(void) { mx31_clocks_init(26000000); } MACHINE_START(QONG, "Dave/DENX QongEVB-LITE") /* Maintainer: DENX Software Engineering GmbH */ .atag_offset = 0x100, .map_io = mx31_map_io, .init_early = imx31_init_early, .init_irq = mx31_init_irq, .handle_irq = imx31_handle_irq, .init_time = qong_timer_init, .init_machine = qong_init, .restart = mxc_restart, MACHINE_END