/*
* linux/arch/alpha/kernel/sys_sable.c
*
* Copyright (C) 1995 David A Rusling
* Copyright (C) 1996 Jay A Estabrook
* Copyright (C) 1998, 1999 Richard Henderson
*
* Code supporting the Sable, Sable-Gamma, and Lynx systems.
*/
#include <linux/kernel.h>
#include <linux/types.h>
#include <linux/mm.h>
#include <linux/sched.h>
#include <linux/pci.h>
#include <linux/init.h>
#include <asm/ptrace.h>
#include <asm/dma.h>
#include <asm/irq.h>
#include <asm/mmu_context.h>
#include <asm/io.h>
#include <asm/pgtable.h>
#include <asm/core_t2.h>
#include <asm/tlbflush.h>
#include "proto.h"
#include "irq_impl.h"
#include "pci_impl.h"
#include "machvec_impl.h"
DEFINE_SPINLOCK(sable_lynx_irq_lock);
typedef struct irq_swizzle_struct
{
char irq_to_mask[64];
char mask_to_irq[64];
/* Note mask bit is true for DISABLED irqs. */
unsigned long shadow_mask;
void (*update_irq_hw)(unsigned long bit, unsigned long mask);
void (*ack_irq_hw)(unsigned long bit);
} irq_swizzle_t;
static irq_swizzle_t *sable_lynx_irq_swizzle;
static void sable_lynx_init_irq(int nr_of_irqs);
#if defined(CONFIG_ALPHA_GENERIC) || defined(CONFIG_ALPHA_SABLE)
/***********************************************************************/
/*
* For SABLE, which is really baroque, we manage 40 IRQ's, but the
* hardware really only supports 24, not via normal ISA PIC,
* but cascaded custom 8259's, etc.
* 0-7 (char at 536)
* 8-15 (char at 53a)
* 16-23 (char at 53c)
*
* Summary Registers (536/53a/53c):
*
* Bit Meaning Kernel IRQ
*------------------------------------------
* 0 PCI slot 0 34
* 1 NCR810 (builtin) 33
* 2 TULIP (builtin) 32
* 3 mouse 12
* 4 PCI slot 1 35
* 5 PCI slot 2 36
* 6 keyboard 1
* 7 floppy 6
* 8 COM2 3
* 9 parallel port 7
*10 EISA irq 3 -
*11 EISA irq 4 -
*12 EISA irq 5 5
*13 EISA irq 6 -
*14 EISA irq 7 -
*15 COM1 4
*16 EISA irq 9 9
*17 EISA irq 10 10
*18 EISA irq 11 11
*19 EISA irq 12 -
*20 EISA irq 13 -
*21 EISA irq 14 14
*22 NC 15
*23 IIC -
*/
static void
sable_update_irq_hw(unsigned long bit, unsigned long mask)
{
int port = 0x537;
if (bit >= 16) {
port = 0x53d;
mask >>= 16;
} else if (bit >= 8) {
port = 0x53b;
mask >>= 8;
}
outb(mask, port);
}
static void
sable_ack_irq_hw(unsigned long bit)
{
int port, val1, val2;
if (bit >= 16) {
port = 0x53c;
val1 = 0xE0 | (bit - 16);
val2 = 0xE0 | 4;
} else if (bit >= 8) {
port = 0x53a;
val1 = 0xE0 | (bit - 8);
val2 = 0xE0 | 3;
} else {
port = 0x536;
val1 = 0xE0 | (bit - 0);
val2 = 0xE0 | 1;
}
outb(val1, port); /* ack the slave */
outb(val2, 0x534); /* ack the master */
}
static irq_swizzle_t sable_irq_swizzle = {
{
-1, 6, -1, 8, 15, 12, 7, 9, /* pseudo PIC 0-7 */
-1, 16, 17, 18, 3, -1, 21, 22, /* pseudo PIC 8-15 */
-1, -1, -1, -1, -1, -1, -1, -1, /* pseudo EISA 0-7 */
-1, -1, -1, -1, -1, -1, -1, -1, /* pseudo EISA 8-15 */
2, 1, 0, 4, 5, -1, -1, -1, /* pseudo PCI */
-1, -1, -1, -1, -1, -1, -1, -1, /* */
-1, -1, -1, -1, -1, -1, -1, -1, /* */
-1, -1, -1, -1, -1, -1, -1, -1 /* */
},
{
34, 33, 32, 12, 35, 36, 1, 6, /* mask 0-7 */
3, 7, -1, -1, 5, -1, -1, 4, /* mask 8-15 */
9, 10, 11, -1, -1, 14, 15, -1, /* mask 16-23 */
-1, -1, -1, -1, -1, -1, -1, -1, /* */
-1, -1, -1, -1, -1, -1, -1, -1, /* */
-1, -1, -1, -1, -1, -1, -1, -1, /* */
-1, -1, -1, -1, -1, -1, -1, -1, /* */
-1, -1, -1, -1, -1, -1, -1, -1 /* */
},
-1,
sable_update_irq_hw,
sable_ack_irq_hw
};
static void __init
sable_init_irq(void)
{
outb(-1, 0x537); /* slave 0 */
outb(-1, 0x53b); /* slave 1 */
outb(-1, 0x53d); /* slave 2 */
outb(0x44, 0x535); /* enable cascades in master */
sable_lynx_irq_swizzle = &sable_irq_swizzle;
sable_lynx_init_irq(40);
}
/*
* PCI Fixup configuration for ALPHA SABLE (2100).
*
* The device to slot mapping looks like:
*
* Slot Device
* 0 TULIP
* 1 SCSI
* 2 PCI-EISA bridge
* 3 none
* 4 none
* 5 none
* 6 PCI on board slot 0
* 7 PCI on board slot 1
* 8 PCI on board slot 2
*
*
* This two layered interrupt approach means that we allocate IRQ 16 and
* above for PCI interrupts. The IRQ relates to which bit the interrupt
* comes in on. This makes interrupt processing much easier.
*/
/*
* NOTE: the IRQ assignments below are arbitrary, but need to be consistent
* with the values in the irq swizzling tables above.
*/
static int __init
sable_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
{
static char irq_tab[9][5] __initdata = {
/*INT INTA INTB INTC INTD */
{ 32+0, 32+0, 32+0, 32+0, 32+0}, /* IdSel 0, TULIP */
{ 32+1, 32+1, 32+1, 32+1, 32+1}, /* IdSel 1, SCSI */
{ -1, -1, -1, -1, -1}, /* IdSel 2, SIO */
{ -1, -1, -1, -1, -1}, /* IdSel 3, none */
{ -1, -1, -1, -1, -1}, /* IdSel 4, none */
{ -1, -1, -1, -1, -1}, /* IdSel 5, none */
{ 32+2, 32+2, 32+2, 32+2, 32+2}, /* IdSel 6, slot 0 */
{ 32+3, 32+3, 32+3, 32+3, 32+3}, /* IdSel 7, slot 1 */
{ 32+4, 32+4, 32+4, 32+4, 32+4} /* IdSel 8, slot 2 */
};
long min_idsel = 0, max_idsel = 8, irqs_per_slot = 5;
return COMMON_TABLE_LOOKUP;
}
#endif /* defined(CONFIG_ALPHA_GENERIC) || defined(CONFIG_ALPHA_SABLE) */
#if defined(CONFIG_ALPHA_GENERIC) || defined(CONFIG_ALPHA_LYNX)
/***********************************************************************/
/* LYNX hardware specifics
*/
/*
* For LYNX, which is also baroque, we manage 64 IRQs, via a custom IC.
*
* Bit Meaning Kernel IRQ
*------------------------------------------
* 0
* 1
* 2
* 3 mouse 12
* 4
* 5
* 6 keyboard 1
* 7 floppy 6
* 8 COM2 3
* 9 parallel port 7
*10 EISA irq 3 -
*11 EISA irq 4 -
*12 EISA irq 5 5
*13 EISA irq 6 -
*14 EISA irq 7 -
*15 COM1 4
*16 EISA irq 9 9
*17 EISA irq 10 10
*18 EISA irq 11 11
*19 EISA irq 12 -
*20
*21 EISA irq 14 14
*22 EISA irq 15 15
*23 IIC -
*24 VGA (builtin) -
*25
*26
*27
*28 NCR810 (builtin) 28
*29
*30
*31
*32 PCI 0 slot 4 A primary bus 32
*33 PCI 0 slot 4 B primary bus 33
*34 PCI 0 slot 4 C primary bus 34
*35 PCI 0 slot 4 D primary bus
*36 PCI 0 slot 5 A primary bus
*37 PCI 0 slot 5 B primary bus
*38 PCI 0 slot 5 C primary bus
*39 PCI 0 slot 5 D primary bus
*40 PCI 0 slot 6 A primary bus
*41 PCI 0 slot 6 B primary bus
*42 PCI 0 slot 6 C primary bus
*43 PCI 0 slot 6 D primary bus
*44 PCI 0 slot 7 A primary bus
*45 PCI 0 slot 7 B primary bus
*46 PCI 0 slot 7 C primary bus
*47 PCI 0 slot 7 D primary bus
*48 PCI 0 slot 0 A secondary bus
*49 PCI 0 slot 0 B secondary bus
*50 PCI 0 slot 0 C secondary bus
*51 PCI 0 slot 0 D secondary bus
*52 PCI 0 slot 1 A secondary bus
*53 PCI 0 slot 1 B secondary bus
*54 PCI 0 slot 1 C secondary bus
*55 PCI 0 slot 1 D secondary bus
*56 PCI 0 slot 2 A secondary bus
*57 PCI 0 slot 2 B secondary bus
*58 PCI 0 slot 2 C secondary bus
*59 PCI 0 slot 2 D secondary bus
*60 PCI 0 slot 3 A secondary bus
*61 PCI 0 slot 3 B secondary bus
*62 PCI 0 slot 3 C secondary bus
*63 PCI 0 slot 3 D secondary bus
*/
static void
lynx_update_irq_hw(unsigned long bit, unsigned long mask)
{
/*
* Write the AIR register on the T3/T4 with the
* address of the IC mask register (offset 0x40)
*/
*(vulp)T2_AIR = 0x40;
mb();
*(vulp)T2_AIR; /* re-read to force write */
mb();
*(vulp)T2_DIR = mask;
mb();
mb();
}
static void
lynx_ack_irq_hw(unsigned long bit)
{
*(vulp)T2_VAR = (u_long) bit;
mb();
mb();
}
static irq_swizzle_t lynx_irq_swizzle = {
{ /* irq_to_mask */
-1, 6, -1, 8, 15, 12, 7, 9, /* pseudo PIC 0-7 */
-1, 16, 17, 18, 3, -1, 21, 22, /* pseudo PIC 8-15 */
-1, -1, -1, -1, -1, -1, -1, -1, /* pseudo */
-1, -1, -1, -1, 28, -1, -1, -1, /* pseudo */
32, 33, 34, 35, 36, 37, 38, 39, /* mask 32-39 */
40, 41, 42, 43, 44, 45, 46, 47, /* mask 40-47 */
48, 49, 50, 51, 52, 53, 54, 55, /* mask 48-55 */
56, 57, 58, 59, 60, 61, 62, 63 /* mask 56-63 */
},
{ /* mask_to_irq */
-1, -1, -1, 12, -1, -1, 1, 6, /* mask 0-7 */
3, 7, -1, -1, 5, -1, -1, 4, /* mask 8-15 */
9, 10, 11, -1, -1, 14, 15, -1, /* mask 16-23 */
-1, -1, -1, -1, 28, -1, -1, -1, /* mask 24-31 */
32, 33, 34, 35, 36, 37, 38, 39, /* mask 32-39 */
40, 41, 42, 43, 44, 45, 46, 47, /* mask 40-47 */
48, 49, 50, 51, 52, 53, 54, 55, /* mask 48-55 */
56, 57, 58, 59, 60, 61, 62, 63 /* mask 56-63 */
},
-1,
lynx_update_irq_hw,
lynx_ack_irq_hw
};
static void __init
lynx_init_irq(void)
{
sable_lynx_irq_swizzle = &lynx_irq_swizzle;
sable_lynx_init_irq(64);
}
/*
* PCI Fixup configuration for ALPHA LYNX (2100A)
*
* The device to slot mapping looks like:
*
* Slot Device
* 0 none
* 1 none
* 2 PCI-EISA bridge
* 3 PCI-PCI bridge
* 4 NCR 810 (Demi-Lynx only)
* 5 none
* 6 PCI on board slot 4
* 7 PCI on board slot 5
* 8 PCI on board slot 6
* 9 PCI on board slot 7
*
* And behind the PPB we have:
*
* 11 PCI on board slot 0
* 12 PCI on board slot 1
* 13 PCI on board slot 2
* 14 PCI on board slot 3
*/
/*
* NOTE: the IRQ assignments below are arbitrary, but need to be consistent
* with the values in the irq swizzling tables above.
*/
static int __init
lynx_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
{
static char irq_tab[19][5] __initdata = {
/*INT INTA INTB INTC INTD */
{ -1, -1, -1, -1, -1}, /* IdSel 13, PCEB */
{ -1, -1, -1, -1, -1}, /* IdSel 14, PPB */
{ 28, 28, 28, 28, 28}, /* IdSel 15, NCR demi */
{ -1, -1, -1, -1, -1}, /* IdSel 16, none */
{ 32, 32, 33, 34, 35}, /* IdSel 17, slot 4 */
{ 36, 36, 37, 38, 39}, /* IdSel 18, slot 5 */
{ 40, 40, 41, 42, 43}, /* IdSel 19, slot 6 */
{ 44, 44, 45, 46, 47}, /* IdSel 20, slot 7 */
{ -1, -1, -1, -1, -1}, /* IdSel 22, none */
/* The following are actually behind the PPB. */
{ -1, -1, -1, -1, -1}, /* IdSel 16 none */
{ 28, 28, 28, 28, 28}, /* IdSel 17 NCR lynx */
{ -1, -1, -1, -1, -1}, /* IdSel 18 none */
{ -1, -1, -1, -1, -1}, /* IdSel 19 none */
{ -1, -1, -1, -1, -1}, /* IdSel 20 none */
{ -1, -1, -1, -1, -1}, /* IdSel 21 none */
{ 48, 48, 49, 50, 51}, /* IdSel 22 slot 0 */
{ 52, 52, 53, 54, 55}, /* IdSel 23 slot 1 */
{ 56, 56, 57, 58, 59}, /* IdSel 24 slot 2 */
{ 60, 60, 61, 62, 63} /* IdSel 25 slot 3 */
};
const long min_idsel = 2, max_idsel = 20, irqs_per_slot = 5;
return COMMON_TABLE_LOOKUP;
}
static u8 __init
lynx_swizzle(struct pci_dev *dev, u8 *pinp)
{
int slot, pin = *pinp;
if (dev->bus->number == 0) {
slot = PCI_SLOT(dev->devfn);
}
/* Check for the built-in bridge */
else if (PCI_SLOT(dev->bus->self->devfn) == 3) {
slot = PCI_SLOT(dev->devfn) + 11;
}
else
{
/* Must be a card-based bridge. */
do {
if (PCI_SLOT(dev->bus->self->devfn) == 3) {
slot = PCI_SLOT(dev->devfn) + 11;
break;
}
pin = pci_swizzle_interrupt_pin(dev, pin);
/* Move up the chain of bridges. */
dev = dev->bus->self;
/* Slot of the next bridge. */
slot = PCI_SLOT(dev->devfn);
} while (dev->bus->self);
}
*pinp = pin;
return slot;
}
#endif /* defined(CONFIG_ALPHA_GENERIC) || defined(CONFIG_ALPHA_LYNX) */
/***********************************************************************/
/* GENERIC irq routines */
static inline void
sable_lynx_enable_irq(struct irq_data *d)
{
unsigned long bit, mask;
bit = sable_lynx_irq_swizzle->irq_to_mask[d->irq];
spin_lock(&sable_lynx_irq_lock);
mask = sable_lynx_irq_swizzle->shadow_mask &= ~(1UL << bit);
sable_lynx_irq_swizzle->update_irq_hw(bit, mask);
spin_unlock(&sable_lynx_irq_lock);
#if 0
printk("%s: mask 0x%lx bit 0x%lx irq 0x%x\n",
__func__, mask, bit, irq);
#endif
}
static void
sable_lynx_disable_irq(struct irq_data *d)
{
unsigned long bit, mask;
bit = sable_lynx_irq_swizzle->irq_to_mask[d->irq];
spin_lock(&sable_lynx_irq_lock);
mask = sable_lynx_irq_swizzle->shadow_mask |= 1UL << bit;
sable_lynx_irq_swizzle->update_irq_hw(bit, mask);
spin_unlock(&sable_lynx_irq_lock);
#if 0
printk("%s: mask 0x%lx bit 0x%lx irq 0x%x\n",
__func__, mask, bit, irq);
#endif
}
static void
sable_lynx_mask_and_ack_irq(struct irq_data *d)
{
unsigned long bit, mask;
bit = sable_lynx_irq_swizzle->irq_to_mask[d->irq];
spin_lock(&sable_lynx_irq_lock);
mask = sable_lynx_irq_swizzle->shadow_mask |= 1UL << bit;
sable_lynx_irq_swizzle->update_irq_hw(bit, mask);
sable_lynx_irq_swizzle->ack_irq_hw(bit);
spin_unlock(&sable_lynx_irq_lock);
}
static struct irq_chip sable_lynx_irq_type = {
.name = "SABLE/LYNX",
.irq_unmask = sable_lynx_enable_irq,
.irq_mask = sable_lynx_disable_irq,
.irq_mask_ack = sable_lynx_mask_and_ack_irq,
};
static void
sable_lynx_srm_device_interrupt(unsigned long vector)
{
/* Note that the vector reported by the SRM PALcode corresponds
to the interrupt mask bits, but we have to manage via the
so-called legacy IRQs for many common devices. */
int bit, irq;
bit = (vector - 0x800) >> 4;
irq = sable_lynx_irq_swizzle->mask_to_irq[bit];
#if 0
printk("%s: vector 0x%lx bit 0x%x irq 0x%x\n",
__func__, vector, bit, irq);
#endif
handle_irq(irq);
}
static void __init
sable_lynx_init_irq(int nr_of_irqs)
{
long i;
for (i = 0; i < nr_of_irqs; ++i) {
irq_set_chip_and_handler(i, &sable_lynx_irq_type,
handle_level_irq);
irq_set_status_flags(i, IRQ_LEVEL);
}
common_init_isa_dma();
}
static void __init
sable_lynx_init_pci(void)
{
common_init_pci();
}
/*****************************************************************/
/*
* The System Vectors
*
* In order that T2_HAE_ADDRESS should be a constant, we play
* these games with GAMMA_BIAS.
*/
#if defined(CONFIG_ALPHA_GENERIC) || \
(defined(CONFIG_ALPHA_SABLE) && !defined(CONFIG_ALPHA_GAMMA))
#undef GAMMA_BIAS
#define GAMMA_BIAS 0
struct alpha_machine_vector sable_mv __initmv = {
.vector_name = "Sable",
DO_EV4_MMU,
DO_DEFAULT_RTC,
DO_T2_IO,
.machine_check = t2_machine_check,
.max_isa_dma_address = ALPHA_SABLE_MAX_ISA_DMA_ADDRESS,
.min_io_address = EISA_DEFAULT_IO_BASE,
.min_mem_address = T2_DEFAULT_MEM_BASE,
.nr_irqs = 40,
.device_interrupt = sable_lynx_srm_device_interrupt,
.init_arch = t2_init_arch,
.init_irq = sable_init_irq,
.init_rtc = common_init_rtc,
.init_pci = sable_lynx_init_pci,
.kill_arch = t2_kill_arch,
.pci_map_irq = sable_map_irq,
.pci_swizzle = common_swizzle,
.sys = { .t2 = {
.gamma_bias = 0
} }
};
ALIAS_MV(sable)
#endif /* GENERIC || (SABLE && !GAMMA) */
#if defined(CONFIG_ALPHA_GENERIC) || \
(defined(CONFIG_ALPHA_SABLE) && defined(CONFIG_ALPHA_GAMMA))
#undef GAMMA_BIAS
#define GAMMA_BIAS _GAMMA_BIAS
struct alpha_machine_vector sable_gamma_mv __initmv = {
.vector_name = "Sable-Gamma",
DO_EV5_MMU,
DO_DEFAULT_RTC,
DO_T2_IO,
.machine_check = t2_machine_check,
.max_isa_dma_address = ALPHA_SABLE_MAX_ISA_DMA_ADDRESS,
.min_io_address = EISA_DEFAULT_IO_BASE,
.min_mem_address = T2_DEFAULT_MEM_BASE,
.nr_irqs = 40,
.device_interrupt = sable_lynx_srm_device_interrupt,
.init_arch = t2_init_arch,
.init_irq = sable_init_irq,
.init_rtc = common_init_rtc,
.init_pci = sable_lynx_init_pci,
.kill_arch = t2_kill_arch,
.pci_map_irq = sable_map_irq,
.pci_swizzle = common_swizzle,
.sys = { .t2 = {
.gamma_bias = _GAMMA_BIAS
} }
};
ALIAS_MV(sable_gamma)
#endif /* GENERIC || (SABLE && GAMMA) */
#if defined(CONFIG_ALPHA_GENERIC) || defined(CONFIG_ALPHA_LYNX)
#undef GAMMA_BIAS
#define GAMMA_BIAS _GAMMA_BIAS
struct alpha_machine_vector lynx_mv __initmv = {
.vector_name = "Lynx",
DO_EV4_MMU,
DO_DEFAULT_RTC,
DO_T2_IO,
.machine_check = t2_machine_check,
.max_isa_dma_address = ALPHA_SABLE_MAX_ISA_DMA_ADDRESS,
.min_io_address = EISA_DEFAULT_IO_BASE,
.min_mem_address = T2_DEFAULT_MEM_BASE,
.nr_irqs = 64,
.device_interrupt = sable_lynx_srm_device_interrupt,
.init_arch = t2_init_arch,
.init_irq = lynx_init_irq,
.init_rtc = common_init_rtc,
.init_pci = sable_lynx_init_pci,
.kill_arch = t2_kill_arch,
.pci_map_irq = lynx_map_irq,
.pci_swizzle = lynx_swizzle,
.sys = { .t2 = {
.gamma_bias = _GAMMA_BIAS
} }
};
ALIAS_MV(lynx)
#endif /* GENERIC || LYNX */