- 根目录:
- drivers
- media
- rc
- mceusb.c
/*
* Driver for USB Windows Media Center Ed. eHome Infrared Transceivers
*
* Copyright (c) 2010-2011, Jarod Wilson <jarod@redhat.com>
*
* Based on the original lirc_mceusb and lirc_mceusb2 drivers, by Dan
* Conti, Martin Blatter and Daniel Melander, the latter of which was
* in turn also based on the lirc_atiusb driver by Paul Miller. The
* two mce drivers were merged into one by Jarod Wilson, with transmit
* support for the 1st-gen device added primarily by Patrick Calhoun,
* with a bit of tweaks by Jarod. Debugging improvements and proper
* support for what appears to be 3rd-gen hardware added by Jarod.
* Initial port from lirc driver to ir-core drivery by Jarod, based
* partially on a port to an earlier proposed IR infrastructure by
* Jon Smirl, which included enhancements and simplifications to the
* incoming IR buffer parsing routines.
*
* Updated in July of 2011 with the aid of Microsoft's official
* remote/transceiver requirements and specification document, found at
* download.microsoft.com, title
* Windows-Media-Center-RC-IR-Collection-Green-Button-Specification-03-08-2011-V2.pdf
*
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*
*/
#include <linux/device.h>
#include <linux/module.h>
#include <linux/slab.h>
#include <linux/usb.h>
#include <linux/usb/input.h>
#include <linux/pm_wakeup.h>
#include <media/rc-core.h>
#define DRIVER_VERSION "1.92"
#define DRIVER_AUTHOR "Jarod Wilson <jarod@redhat.com>"
#define DRIVER_DESC "Windows Media Center Ed. eHome Infrared Transceiver " \
"device driver"
#define DRIVER_NAME "mceusb"
#define USB_BUFLEN 32 /* USB reception buffer length */
#define USB_CTRL_MSG_SZ 2 /* Size of usb ctrl msg on gen1 hw */
#define MCE_G1_INIT_MSGS 40 /* Init messages on gen1 hw to throw out */
/* MCE constants */
#define MCE_CMDBUF_SIZE 384 /* MCE Command buffer length */
#define MCE_TIME_UNIT 50 /* Approx 50us resolution */
#define MCE_CODE_LENGTH 5 /* Normal length of packet (with header) */
#define MCE_PACKET_SIZE 4 /* Normal length of packet (without header) */
#define MCE_IRDATA_HEADER 0x84 /* Actual header format is 0x80 + num_bytes */
#define MCE_IRDATA_TRAILER 0x80 /* End of IR data */
#define MCE_MAX_CHANNELS 2 /* Two transmitters, hardware dependent? */
#define MCE_DEFAULT_TX_MASK 0x03 /* Vals: TX1=0x01, TX2=0x02, ALL=0x03 */
#define MCE_PULSE_BIT 0x80 /* Pulse bit, MSB set == PULSE else SPACE */
#define MCE_PULSE_MASK 0x7f /* Pulse mask */
#define MCE_MAX_PULSE_LENGTH 0x7f /* Longest transmittable pulse symbol */
/*
* The interface between the host and the IR hardware is command-response
* based. All commands and responses have a consistent format, where a lead
* byte always identifies the type of data following it. The lead byte has
* a port value in the 3 highest bits and a length value in the 5 lowest
* bits.
*
* The length field is overloaded, with a value of 11111 indicating that the
* following byte is a command or response code, and the length of the entire
* message is determined by the code. If the length field is not 11111, then
* it specifies the number of bytes of port data that follow.
*/
#define MCE_CMD 0x1f
#define MCE_PORT_IR 0x4 /* (0x4 << 5) | MCE_CMD = 0x9f */
#define MCE_PORT_SYS 0x7 /* (0x7 << 5) | MCE_CMD = 0xff */
#define MCE_PORT_SER 0x6 /* 0xc0 thru 0xdf flush & 0x1f bytes */
#define MCE_PORT_MASK 0xe0 /* Mask out command bits */
/* Command port headers */
#define MCE_CMD_PORT_IR 0x9f /* IR-related cmd/rsp */
#define MCE_CMD_PORT_SYS 0xff /* System (non-IR) device cmd/rsp */
/* Commands that set device state (2-4 bytes in length) */
#define MCE_CMD_RESET 0xfe /* Reset device, 2 bytes */
#define MCE_CMD_RESUME 0xaa /* Resume device after error, 2 bytes */
#define MCE_CMD_SETIRCFS 0x06 /* Set tx carrier, 4 bytes */
#define MCE_CMD_SETIRTIMEOUT 0x0c /* Set timeout, 4 bytes */
#define MCE_CMD_SETIRTXPORTS 0x08 /* Set tx ports, 3 bytes */
#define MCE_CMD_SETIRRXPORTEN 0x14 /* Set rx ports, 3 bytes */
#define MCE_CMD_FLASHLED 0x23 /* Flash receiver LED, 2 bytes */
/* Commands that query device state (all 2 bytes, unless noted) */
#define MCE_CMD_GETIRCFS 0x07 /* Get carrier */
#define MCE_CMD_GETIRTIMEOUT 0x0d /* Get timeout */
#define MCE_CMD_GETIRTXPORTS 0x13 /* Get tx ports */
#define MCE_CMD_GETIRRXPORTEN 0x15 /* Get rx ports */
#define MCE_CMD_GETPORTSTATUS 0x11 /* Get tx port status, 3 bytes */
#define MCE_CMD_GETIRNUMPORTS 0x16 /* Get number of ports */
#define MCE_CMD_GETWAKESOURCE 0x17 /* Get wake source */
#define MCE_CMD_GETEMVER 0x22 /* Get emulator interface version */
#define MCE_CMD_GETDEVDETAILS 0x21 /* Get device details (em ver2 only) */
#define MCE_CMD_GETWAKESUPPORT 0x20 /* Get wake details (em ver2 only) */
#define MCE_CMD_GETWAKEVERSION 0x18 /* Get wake pattern (em ver2 only) */
/* Misc commands */
#define MCE_CMD_NOP 0xff /* No operation */
/* Responses to commands (non-error cases) */
#define MCE_RSP_EQIRCFS 0x06 /* tx carrier, 4 bytes */
#define MCE_RSP_EQIRTIMEOUT 0x0c /* rx timeout, 4 bytes */
#define MCE_RSP_GETWAKESOURCE 0x17 /* wake source, 3 bytes */
#define MCE_RSP_EQIRTXPORTS 0x08 /* tx port mask, 3 bytes */
#define MCE_RSP_EQIRRXPORTEN 0x14 /* rx port mask, 3 bytes */
#define MCE_RSP_GETPORTSTATUS 0x11 /* tx port status, 7 bytes */
#define MCE_RSP_EQIRRXCFCNT 0x15 /* rx carrier count, 4 bytes */
#define MCE_RSP_EQIRNUMPORTS 0x16 /* number of ports, 4 bytes */
#define MCE_RSP_EQWAKESUPPORT 0x20 /* wake capabilities, 3 bytes */
#define MCE_RSP_EQWAKEVERSION 0x18 /* wake pattern details, 6 bytes */
#define MCE_RSP_EQDEVDETAILS 0x21 /* device capabilities, 3 bytes */
#define MCE_RSP_EQEMVER 0x22 /* emulator interface ver, 3 bytes */
#define MCE_RSP_FLASHLED 0x23 /* success flashing LED, 2 bytes */
/* Responses to error cases, must send MCE_CMD_RESUME to clear them */
#define MCE_RSP_CMD_ILLEGAL 0xfe /* illegal command for port, 2 bytes */
#define MCE_RSP_TX_TIMEOUT 0x81 /* tx timed out, 2 bytes */
/* Misc commands/responses not defined in the MCE remote/transceiver spec */
#define MCE_CMD_SIG_END 0x01 /* End of signal */
#define MCE_CMD_PING 0x03 /* Ping device */
#define MCE_CMD_UNKNOWN 0x04 /* Unknown */
#define MCE_CMD_UNKNOWN2 0x05 /* Unknown */
#define MCE_CMD_UNKNOWN3 0x09 /* Unknown */
#define MCE_CMD_UNKNOWN4 0x0a /* Unknown */
#define MCE_CMD_G_REVISION 0x0b /* Get hw/sw revision */
#define MCE_CMD_UNKNOWN5 0x0e /* Unknown */
#define MCE_CMD_UNKNOWN6 0x0f /* Unknown */
#define MCE_CMD_UNKNOWN8 0x19 /* Unknown */
#define MCE_CMD_UNKNOWN9 0x1b /* Unknown */
#define MCE_CMD_NULL 0x00 /* These show up various places... */
/* if buf[i] & MCE_PORT_MASK == 0x80 and buf[i] != MCE_CMD_PORT_IR,
* then we're looking at a raw IR data sample */
#define MCE_COMMAND_IRDATA 0x80
#define MCE_PACKET_LENGTH_MASK 0x1f /* Packet length mask */
/* module parameters */
#ifdef CONFIG_USB_DEBUG
static bool debug = 1;
#else
static bool debug;
#endif
#define mce_dbg(dev, fmt, ...) \
do { \
if (debug) \
dev_info(dev, fmt, ## __VA_ARGS__); \
} while (0)
/* general constants */
#define SEND_FLAG_IN_PROGRESS 1
#define SEND_FLAG_COMPLETE 2
#define RECV_FLAG_IN_PROGRESS 3
#define RECV_FLAG_COMPLETE 4
#define MCEUSB_RX 1
#define MCEUSB_TX 2
#define VENDOR_PHILIPS 0x0471
#define VENDOR_SMK 0x0609
#define VENDOR_TATUNG 0x1460
#define VENDOR_GATEWAY 0x107b
#define VENDOR_SHUTTLE 0x1308
#define VENDOR_SHUTTLE2 0x051c
#define VENDOR_MITSUMI 0x03ee
#define VENDOR_TOPSEED 0x1784
#define VENDOR_RICAVISION 0x179d
#define VENDOR_ITRON 0x195d
#define VENDOR_FIC 0x1509
#define VENDOR_LG 0x043e
#define VENDOR_MICROSOFT 0x045e
#define VENDOR_FORMOSA 0x147a
#define VENDOR_FINTEK 0x1934
#define VENDOR_PINNACLE 0x2304
#define VENDOR_ECS 0x1019
#define VENDOR_WISTRON 0x0fb8
#define VENDOR_COMPRO 0x185b
#define VENDOR_NORTHSTAR 0x04eb
#define VENDOR_REALTEK 0x0bda
#define VENDOR_TIVO 0x105a
#define VENDOR_CONEXANT 0x0572
#define VENDOR_TWISTEDMELON 0x2596
enum mceusb_model_type {
MCE_GEN2 = 0, /* Most boards */
MCE_GEN1,
MCE_GEN3,
MCE_GEN2_TX_INV,
POLARIS_EVK,
CX_HYBRID_TV,
MULTIFUNCTION,
TIVO_KIT,
MCE_GEN2_NO_TX,
};
struct mceusb_model {
u32 mce_gen1:1;
u32 mce_gen2:1;
u32 mce_gen3:1;
u32 tx_mask_normal:1;
u32 no_tx:1;
int ir_intfnum;
const char *rc_map; /* Allow specify a per-board map */
const char *name; /* per-board name */
};
static const struct mceusb_model mceusb_model[] = {
[MCE_GEN1] = {
.mce_gen1 = 1,
.tx_mask_normal = 1,
},
[MCE_GEN2] = {
.mce_gen2 = 1,
},
[MCE_GEN2_NO_TX] = {
.mce_gen2 = 1,
.no_tx = 1,
},
[MCE_GEN2_TX_INV] = {
.mce_gen2 = 1,
.tx_mask_normal = 1,
},
[MCE_GEN3] = {
.mce_gen3 = 1,
.tx_mask_normal = 1,
},
[POLARIS_EVK] = {
/*
* In fact, the EVK is shipped without
* remotes, but we should have something handy,
* to allow testing it
*/
.rc_map = RC_MAP_HAUPPAUGE,
.name = "Conexant Hybrid TV (cx231xx) MCE IR",
},
[CX_HYBRID_TV] = {
.no_tx = 1, /* tx isn't wired up at all */
.name = "Conexant Hybrid TV (cx231xx) MCE IR",
},
[MULTIFUNCTION] = {
.mce_gen2 = 1,
.ir_intfnum = 2,
},
[TIVO_KIT] = {
.mce_gen2 = 1,
.rc_map = RC_MAP_TIVO,
},
};
static struct usb_device_id mceusb_dev_table[] = {
/* Original Microsoft MCE IR Transceiver (often HP-branded) */
{ USB_DEVICE(VENDOR_MICROSOFT, 0x006d),
.driver_info = MCE_GEN1 },
/* Philips Infrared Transceiver - Sahara branded */
{ USB_DEVICE(VENDOR_PHILIPS, 0x0608) },
/* Philips Infrared Transceiver - HP branded */
{ USB_DEVICE(VENDOR_PHILIPS, 0x060c),
.driver_info = MCE_GEN2_TX_INV },
/* Philips SRM5100 */
{ USB_DEVICE(VENDOR_PHILIPS, 0x060d) },
/* Philips Infrared Transceiver - Omaura */
{ USB_DEVICE(VENDOR_PHILIPS, 0x060f) },
/* Philips Infrared Transceiver - Spinel plus */
{ USB_DEVICE(VENDOR_PHILIPS, 0x0613) },
/* Philips eHome Infrared Transceiver */
{ USB_DEVICE(VENDOR_PHILIPS, 0x0815) },
/* Philips/Spinel plus IR transceiver for ASUS */
{ USB_DEVICE(VENDOR_PHILIPS, 0x206c) },
/* Philips/Spinel plus IR transceiver for ASUS */
{ USB_DEVICE(VENDOR_PHILIPS, 0x2088) },
/* Philips IR transceiver (Dell branded) */
{ USB_DEVICE(VENDOR_PHILIPS, 0x2093),
.driver_info = MCE_GEN2_TX_INV },
/* Realtek MCE IR Receiver and card reader */
{ USB_DEVICE(VENDOR_REALTEK, 0x0161),
.driver_info = MULTIFUNCTION },
/* SMK/Toshiba G83C0004D410 */
{ USB_DEVICE(VENDOR_SMK, 0x031d),
.driver_info = MCE_GEN2_TX_INV },
/* SMK eHome Infrared Transceiver (Sony VAIO) */
{ USB_DEVICE(VENDOR_SMK, 0x0322),
.driver_info = MCE_GEN2_TX_INV },
/* bundled with Hauppauge PVR-150 */
{ USB_DEVICE(VENDOR_SMK, 0x0334),
.driver_info = MCE_GEN2_TX_INV },
/* SMK eHome Infrared Transceiver */
{ USB_DEVICE(VENDOR_SMK, 0x0338) },
/* SMK/I-O Data GV-MC7/RCKIT Receiver */
{ USB_DEVICE(VENDOR_SMK, 0x0353),
.driver_info = MCE_GEN2_NO_TX },
/* Tatung eHome Infrared Transceiver */
{ USB_DEVICE(VENDOR_TATUNG, 0x9150) },
/* Shuttle eHome Infrared Transceiver */
{ USB_DEVICE(VENDOR_SHUTTLE, 0xc001) },
/* Shuttle eHome Infrared Transceiver */
{ USB_DEVICE(VENDOR_SHUTTLE2, 0xc001) },
/* Gateway eHome Infrared Transceiver */
{ USB_DEVICE(VENDOR_GATEWAY, 0x3009) },
/* Mitsumi */
{ USB_DEVICE(VENDOR_MITSUMI, 0x2501) },
/* Topseed eHome Infrared Transceiver */
{ USB_DEVICE(VENDOR_TOPSEED, 0x0001),
.driver_info = MCE_GEN2_TX_INV },
/* Topseed HP eHome Infrared Transceiver */
{ USB_DEVICE(VENDOR_TOPSEED, 0x0006),
.driver_info = MCE_GEN2_TX_INV },
/* Topseed eHome Infrared Transceiver */
{ USB_DEVICE(VENDOR_TOPSEED, 0x0007),
.driver_info = MCE_GEN2_TX_INV },
/* Topseed eHome Infrared Transceiver */
{ USB_DEVICE(VENDOR_TOPSEED, 0x0008),
.driver_info = MCE_GEN3 },
/* Topseed eHome Infrared Transceiver */
{ USB_DEVICE(VENDOR_TOPSEED, 0x000a),
.driver_info = MCE_GEN2_TX_INV },
/* Topseed eHome Infrared Transceiver */
{ USB_DEVICE(VENDOR_TOPSEED, 0x0011),
.driver_info = MCE_GEN3 },
/* Ricavision internal Infrared Transceiver */
{ USB_DEVICE(VENDOR_RICAVISION, 0x0010) },
/* Itron ione Libra Q-11 */
{ USB_DEVICE(VENDOR_ITRON, 0x7002) },
/* FIC eHome Infrared Transceiver */
{ USB_DEVICE(VENDOR_FIC, 0x9242) },
/* LG eHome Infrared Transceiver */
{ USB_DEVICE(VENDOR_LG, 0x9803) },
/* Microsoft MCE Infrared Transceiver */
{ USB_DEVICE(VENDOR_MICROSOFT, 0x00a0) },
/* Formosa eHome Infrared Transceiver */
{ USB_DEVICE(VENDOR_FORMOSA, 0xe015) },
/* Formosa21 / eHome Infrared Receiver */
{ USB_DEVICE(VENDOR_FORMOSA, 0xe016) },
/* Formosa aim / Trust MCE Infrared Receiver */
{ USB_DEVICE(VENDOR_FORMOSA, 0xe017),
.driver_info = MCE_GEN2_NO_TX },
/* Formosa Industrial Computing / Beanbag Emulation Device */
{ USB_DEVICE(VENDOR_FORMOSA, 0xe018) },
/* Formosa21 / eHome Infrared Receiver */
{ USB_DEVICE(VENDOR_FORMOSA, 0xe03a) },
/* Formosa Industrial Computing AIM IR605/A */
{ USB_DEVICE(VENDOR_FORMOSA, 0xe03c) },
/* Formosa Industrial Computing */
{ USB_DEVICE(VENDOR_FORMOSA, 0xe03e) },
/* Formosa Industrial Computing */
{ USB_DEVICE(VENDOR_FORMOSA, 0xe042) },
/* Fintek eHome Infrared Transceiver (HP branded) */
{ USB_DEVICE(VENDOR_FINTEK, 0x5168),
.driver_info = MCE_GEN2_TX_INV },
/* Fintek eHome Infrared Transceiver */
{ USB_DEVICE(VENDOR_FINTEK, 0x0602) },
/* Fintek eHome Infrared Transceiver (in the AOpen MP45) */
{ USB_DEVICE(VENDOR_FINTEK, 0x0702) },
/* Pinnacle Remote Kit */
{ USB_DEVICE(VENDOR_PINNACLE, 0x0225),
.driver_info = MCE_GEN3 },
/* Elitegroup Computer Systems IR */
{ USB_DEVICE(VENDOR_ECS, 0x0f38) },
/* Wistron Corp. eHome Infrared Receiver */
{ USB_DEVICE(VENDOR_WISTRON, 0x0002) },
/* Compro K100 */
{ USB_DEVICE(VENDOR_COMPRO, 0x3020) },
/* Compro K100 v2 */
{ USB_DEVICE(VENDOR_COMPRO, 0x3082) },
/* Northstar Systems, Inc. eHome Infrared Transceiver */
{ USB_DEVICE(VENDOR_NORTHSTAR, 0xe004) },
/* TiVo PC IR Receiver */
{ USB_DEVICE(VENDOR_TIVO, 0x2000),
.driver_info = TIVO_KIT },
/* Conexant Hybrid TV "Shelby" Polaris SDK */
{ USB_DEVICE(VENDOR_CONEXANT, 0x58a1),
.driver_info = POLARIS_EVK },
/* Conexant Hybrid TV RDU253S Polaris */
{ USB_DEVICE(VENDOR_CONEXANT, 0x58a5),
.driver_info = CX_HYBRID_TV },
/* Twisted Melon Inc. - Manta Mini Receiver */
{ USB_DEVICE(VENDOR_TWISTEDMELON, 0x8008) },
/* Twisted Melon Inc. - Manta Pico Receiver */
{ USB_DEVICE(VENDOR_TWISTEDMELON, 0x8016) },
/* Twisted Melon Inc. - Manta Transceiver */
{ USB_DEVICE(VENDOR_TWISTEDMELON, 0x8042) },
/* Terminating entry */
{ }
};
/* data structure for each usb transceiver */
struct mceusb_dev {
/* ir-core bits */
struct rc_dev *rc;
/* optional features we can enable */
bool carrier_report_enabled;
bool learning_enabled;
/* core device bits */
struct device *dev;
/* usb */
struct usb_device *usbdev;
struct urb *urb_in;
struct usb_endpoint_descriptor *usb_ep_out;
/* buffers and dma */
unsigned char *buf_in;
unsigned int len_in;
dma_addr_t dma_in;
enum {
CMD_HEADER = 0,
SUBCMD,
CMD_DATA,
PARSE_IRDATA,
} parser_state;
u8 cmd, rem; /* Remaining IR data bytes in packet */
struct {
u32 connected:1;
u32 tx_mask_normal:1;
u32 microsoft_gen1:1;
u32 no_tx:1;
} flags;
/* transmit support */
int send_flags;
u32 carrier;
unsigned char tx_mask;
char name[128];
char phys[64];
enum mceusb_model_type model;
bool need_reset; /* flag to issue a device resume cmd */
u8 emver; /* emulator interface version */
u8 num_txports; /* number of transmit ports */
u8 num_rxports; /* number of receive sensors */
u8 txports_cabled; /* bitmask of transmitters with cable */
u8 rxports_active; /* bitmask of active receive sensors */
};
/* MCE Device Command Strings, generally a port and command pair */
static char DEVICE_RESUME[] = {MCE_CMD_NULL, MCE_CMD_PORT_SYS,
MCE_CMD_RESUME};
static char GET_REVISION[] = {MCE_CMD_PORT_SYS, MCE_CMD_G_REVISION};
static char GET_EMVER[] = {MCE_CMD_PORT_SYS, MCE_CMD_GETEMVER};
static char GET_WAKEVERSION[] = {MCE_CMD_PORT_SYS, MCE_CMD_GETWAKEVERSION};
static char FLASH_LED[] = {MCE_CMD_PORT_SYS, MCE_CMD_FLASHLED};
static char GET_UNKNOWN2[] = {MCE_CMD_PORT_IR, MCE_CMD_UNKNOWN2};
static char GET_CARRIER_FREQ[] = {MCE_CMD_PORT_IR, MCE_CMD_GETIRCFS};
static char GET_RX_TIMEOUT[] = {MCE_CMD_PORT_IR, MCE_CMD_GETIRTIMEOUT};
static char GET_NUM_PORTS[] = {MCE_CMD_PORT_IR, MCE_CMD_GETIRNUMPORTS};
static char GET_TX_BITMASK[] = {MCE_CMD_PORT_IR, MCE_CMD_GETIRTXPORTS};
static char GET_RX_SENSOR[] = {MCE_CMD_PORT_IR, MCE_CMD_GETIRRXPORTEN};
/* sub in desired values in lower byte or bytes for full command */
/* FIXME: make use of these for transmit.
static char SET_CARRIER_FREQ[] = {MCE_CMD_PORT_IR,
MCE_CMD_SETIRCFS, 0x00, 0x00};
static char SET_TX_BITMASK[] = {MCE_CMD_PORT_IR, MCE_CMD_SETIRTXPORTS, 0x00};
static char SET_RX_TIMEOUT[] = {MCE_CMD_PORT_IR,
MCE_CMD_SETIRTIMEOUT, 0x00, 0x00};
static char SET_RX_SENSOR[] = {MCE_CMD_PORT_IR,
MCE_RSP_EQIRRXPORTEN, 0x00};
*/
static int mceusb_cmd_datasize(u8 cmd, u8 subcmd)
{
int datasize = 0;
switch (cmd) {
case MCE_CMD_NULL:
if (subcmd == MCE_CMD_PORT_SYS)
datasize = 1;
break;
case MCE_CMD_PORT_SYS:
switch (subcmd) {
case MCE_RSP_GETPORTSTATUS:
datasize = 5;
break;
case MCE_RSP_EQWAKEVERSION:
datasize = 4;
break;
case MCE_CMD_G_REVISION:
datasize = 2;
break;
case MCE_RSP_EQWAKESUPPORT:
case MCE_RSP_GETWAKESOURCE:
case MCE_RSP_EQDEVDETAILS:
case MCE_RSP_EQEMVER:
datasize = 1;
break;
}
case MCE_CMD_PORT_IR:
switch (subcmd) {
case MCE_CMD_UNKNOWN:
case MCE_RSP_EQIRCFS:
case MCE_RSP_EQIRTIMEOUT:
case MCE_RSP_EQIRRXCFCNT:
case MCE_RSP_EQIRNUMPORTS:
datasize = 2;
break;
case MCE_CMD_SIG_END:
case MCE_RSP_EQIRTXPORTS:
case MCE_RSP_EQIRRXPORTEN:
datasize = 1;
break;
}
}
return datasize;
}
static void mceusb_dev_printdata(struct mceusb_dev *ir, char *buf,
int offset, int len, bool out)
{
char codes[USB_BUFLEN * 3 + 1];
char inout[9];
u8 cmd, subcmd, data1, data2, data3, data4;
struct device *dev = ir->dev;
int i, start, skip = 0;
u32 carrier, period;
if (!debug)
return;
/* skip meaningless 0xb1 0x60 header bytes on orig receiver */
if (ir->flags.microsoft_gen1 && !out && !offset)
skip = 2;
if (len <= skip)
return;
for (i = 0; i < len && i < USB_BUFLEN; i++)
snprintf(codes + i * 3, 4, "%02x ", buf[i + offset] & 0xff);
dev_info(dev, "%sx data: %s(length=%d)\n",
(out ? "t" : "r"), codes, len);
if (out)
strcpy(inout, "Request\0");
else
strcpy(inout, "Got\0");
start = offset + skip;
cmd = buf[start] & 0xff;
subcmd = buf[start + 1] & 0xff;
data1 = buf[start + 2] & 0xff;
data2 = buf[start + 3] & 0xff;
data3 = buf[start + 4] & 0xff;
data4 = buf[start + 5] & 0xff;
switch (cmd) {
case MCE_CMD_NULL:
if (subcmd == MCE_CMD_NULL)
break;
if ((subcmd == MCE_CMD_PORT_SYS) &&
(data1 == MCE_CMD_RESUME))
dev_info(dev, "Device resume requested\n");
else
dev_info(dev, "Unknown command 0x%02x 0x%02x\n",
cmd, subcmd);
break;
case MCE_CMD_PORT_SYS:
switch (subcmd) {
case MCE_RSP_EQEMVER:
if (!out)
dev_info(dev, "Emulator interface version %x\n",
data1);
break;
case MCE_CMD_G_REVISION:
if (len == 2)
dev_info(dev, "Get hw/sw rev?\n");
else
dev_info(dev, "hw/sw rev 0x%02x 0x%02x "
"0x%02x 0x%02x\n", data1, data2,
buf[start + 4], buf[start + 5]);
break;
case MCE_CMD_RESUME:
dev_info(dev, "Device resume requested\n");
break;
case MCE_RSP_CMD_ILLEGAL:
dev_info(dev, "Illegal PORT_SYS command\n");
break;
case MCE_RSP_EQWAKEVERSION:
if (!out)
dev_info(dev, "Wake version, proto: 0x%02x, "
"payload: 0x%02x, address: 0x%02x, "
"version: 0x%02x\n",
data1, data2, data3, data4);
break;
case MCE_RSP_GETPORTSTATUS:
if (!out)
/* We use data1 + 1 here, to match hw labels */
dev_info(dev, "TX port %d: blaster is%s connected\n",
data1 + 1, data4 ? " not" : "");
break;
case MCE_CMD_FLASHLED:
dev_info(dev, "Attempting to flash LED\n");
break;
default:
dev_info(dev, "Unknown command 0x%02x 0x%02x\n",
cmd, subcmd);
break;
}
break;
case MCE_CMD_PORT_IR:
switch (subcmd) {
case MCE_CMD_SIG_END:
dev_info(dev, "End of signal\n");
break;
case MCE_CMD_PING:
dev_info(dev, "Ping\n");
break;
case MCE_CMD_UNKNOWN:
dev_info(dev, "Resp to 9f 05 of 0x%02x 0x%02x\n",
data1, data2);
break;
case MCE_RSP_EQIRCFS:
period = DIV_ROUND_CLOSEST(
(1U << data1 * 2) * (data2 + 1), 10);
if (!period)
break;
carrier = (1000 * 1000) / period;
dev_info(dev, "%s carrier of %u Hz (period %uus)\n",
inout, carrier, period);
break;
case MCE_CMD_GETIRCFS:
dev_info(dev, "Get carrier mode and freq\n");
break;
case MCE_RSP_EQIRTXPORTS:
dev_info(dev, "%s transmit blaster mask of 0x%02x\n",
inout, data1);
break;
case MCE_RSP_EQIRTIMEOUT:
/* value is in units of 50us, so x*50/1000 ms */
period = ((data1 << 8) | data2) * MCE_TIME_UNIT / 1000;
dev_info(dev, "%s receive timeout of %d ms\n",
inout, period);
break;
case MCE_CMD_GETIRTIMEOUT:
dev_info(dev, "Get receive timeout\n");
break;
case MCE_CMD_GETIRTXPORTS:
dev_info(dev, "Get transmit blaster mask\n");
break;
case MCE_RSP_EQIRRXPORTEN:
dev_info(dev, "%s %s-range receive sensor in use\n",
inout, data1 == 0x02 ? "short" : "long");
break;
case MCE_CMD_GETIRRXPORTEN:
/* aka MCE_RSP_EQIRRXCFCNT */
if (out)
dev_info(dev, "Get receive sensor\n");
else if (ir->learning_enabled)
dev_info(dev, "RX pulse count: %d\n",
((data1 << 8) | data2));
break;
case MCE_RSP_EQIRNUMPORTS:
if (out)
break;
dev_info(dev, "Num TX ports: %x, num RX ports: %x\n",
data1, data2);
break;
case MCE_RSP_CMD_ILLEGAL:
dev_info(dev, "Illegal PORT_IR command\n");
break;
default:
dev_info(dev, "Unknown command 0x%02x 0x%02x\n",
cmd, subcmd);
break;
}
break;
default:
break;
}
if (cmd == MCE_IRDATA_TRAILER)
dev_info(dev, "End of raw IR data\n");
else if ((cmd != MCE_CMD_PORT_IR) &&
((cmd & MCE_PORT_MASK) == MCE_COMMAND_IRDATA))
dev_info(dev, "Raw IR data, %d pulse/space samples\n", ir->rem);
}
static void mce_async_callback(struct urb *urb)
{
struct mceusb_dev *ir;
int len;
if (!urb)
return;
ir = urb->context;
if (ir) {
len = urb->actual_length;
mceusb_dev_printdata(ir, urb->transfer_buffer, 0, len, true);
}
/* the transfer buffer and urb were allocated in mce_request_packet */
kfree(urb->transfer_buffer);
usb_free_urb(urb);
}
/* request incoming or send outgoing usb packet - used to initialize remote */
static void mce_request_packet(struct mceusb_dev *ir, unsigned char *data,
int size, int urb_type)
{
int res, pipe;
struct urb *async_urb;
struct device *dev = ir->dev;
unsigned char *async_buf;
if (urb_type == MCEUSB_TX) {
async_urb = usb_alloc_urb(0, GFP_KERNEL);
if (unlikely(!async_urb)) {
dev_err(dev, "Error, couldn't allocate urb!\n");
return;
}
async_buf = kzalloc(size, GFP_KERNEL);
if (!async_buf) {
dev_err(dev, "Error, couldn't allocate buf!\n");
usb_free_urb(async_urb);
return;
}
/* outbound data */
pipe = usb_sndintpipe(ir->usbdev,
ir->usb_ep_out->bEndpointAddress);
usb_fill_int_urb(async_urb, ir->usbdev, pipe,
async_buf, size, mce_async_callback,
ir, ir->usb_ep_out->bInterval);
memcpy(async_buf, data, size);
} else if (urb_type == MCEUSB_RX) {
/* standard request */
async_urb = ir->urb_in;
ir->send_flags = RECV_FLAG_IN_PROGRESS;
} else {
dev_err(dev, "Error! Unknown urb type %d\n", urb_type);
return;
}
mce_dbg(dev, "receive request called (size=%#x)\n", size);
async_urb->transfer_buffer_length = size;
async_urb->dev = ir->usbdev;
res = usb_submit_urb(async_urb, GFP_ATOMIC);
if (res) {
mce_dbg(dev, "receive request FAILED! (res=%d)\n", res);
return;
}
mce_dbg(dev, "receive request complete (res=%d)\n", res);
}
static void mce_async_out(struct mceusb_dev *ir, unsigned char *data, int size)
{
int rsize = sizeof(DEVICE_RESUME);
if (ir->need_reset) {
ir->need_reset = false;
mce_request_packet(ir, DEVICE_RESUME, rsize, MCEUSB_TX);
msleep(10);
}
mce_request_packet(ir, data, size, MCEUSB_TX);
msleep(10);
}
static void mce_flush_rx_buffer(struct mceusb_dev *ir, int size)
{
mce_request_packet(ir, NULL, size, MCEUSB_RX);
}
/* Send data out the IR blaster port(s) */
static int mceusb_tx_ir(struct rc_dev *dev, unsigned *txbuf, unsigned count)
{
struct mceusb_dev *ir = dev->priv;
int i, length, ret = 0;
int cmdcount = 0;
unsigned char cmdbuf[MCE_CMDBUF_SIZE];
/* MCE tx init header */
cmdbuf[cmdcount++] = MCE_CMD_PORT_IR;
cmdbuf[cmdcount++] = MCE_CMD_SETIRTXPORTS;
cmdbuf[cmdcount++] = ir->tx_mask;
/* Send the set TX ports command */
mce_async_out(ir, cmdbuf, cmdcount);
cmdcount = 0;
/* Generate mce packet data */
for (i = 0; (i < count) && (cmdcount < MCE_CMDBUF_SIZE); i++) {
txbuf[i] = txbuf[i] / MCE_TIME_UNIT;
do { /* loop to support long pulses/spaces > 127*50us=6.35ms */
/* Insert mce packet header every 4th entry */
if ((cmdcount < MCE_CMDBUF_SIZE) &&
(cmdcount % MCE_CODE_LENGTH) == 0)
cmdbuf[cmdcount++] = MCE_IRDATA_HEADER;
/* Insert mce packet data */
if (cmdcount < MCE_CMDBUF_SIZE)
cmdbuf[cmdcount++] =
(txbuf[i] < MCE_PULSE_BIT ?
txbuf[i] : MCE_MAX_PULSE_LENGTH) |
(i & 1 ? 0x00 : MCE_PULSE_BIT);
else {
ret = -EINVAL;
goto out;
}
} while ((txbuf[i] > MCE_MAX_PULSE_LENGTH) &&
(txbuf[i] -= MCE_MAX_PULSE_LENGTH));
}
/* Check if we have room for the empty packet at the end */
if (cmdcount >= MCE_CMDBUF_SIZE) {
ret = -EINVAL;
goto out;
}
/* Fix packet length in last header */
length = cmdcount % MCE_CODE_LENGTH;
cmdbuf[cmdcount - length] -= MCE_CODE_LENGTH - length;
/* All mce commands end with an empty packet (0x80) */
cmdbuf[cmdcount++] = MCE_IRDATA_TRAILER;
/* Transmit the command to the mce device */
mce_async_out(ir, cmdbuf, cmdcount);
out:
return ret ? ret : count;
}
/* Sets active IR outputs -- mce devices typically have two */
static int mceusb_set_tx_mask(struct rc_dev *dev, u32 mask)
{
struct mceusb_dev *ir = dev->priv;
if (ir->flags.tx_mask_normal)
ir->tx_mask = mask;
else
ir->tx_mask = (mask != MCE_DEFAULT_TX_MASK ?
mask ^ MCE_DEFAULT_TX_MASK : mask) << 1;
return 0;
}
/* Sets the send carrier frequency and mode */
static int mceusb_set_tx_carrier(struct rc_dev *dev, u32 carrier)
{
struct mceusb_dev *ir = dev->priv;
int clk = 10000000;
int prescaler = 0, divisor = 0;
unsigned char cmdbuf[4] = { MCE_CMD_PORT_IR,
MCE_CMD_SETIRCFS, 0x00, 0x00 };
/* Carrier has changed */
if (ir->carrier != carrier) {
if (carrier == 0) {
ir->carrier = carrier;
cmdbuf[2] = MCE_CMD_SIG_END;
cmdbuf[3] = MCE_IRDATA_TRAILER;
mce_dbg(ir->dev, "%s: disabling carrier "
"modulation\n", __func__);
mce_async_out(ir, cmdbuf, sizeof(cmdbuf));
return carrier;
}
for (prescaler = 0; prescaler < 4; ++prescaler) {
divisor = (clk >> (2 * prescaler)) / carrier;
if (divisor <= 0xff) {
ir->carrier = carrier;
cmdbuf[2] = prescaler;
cmdbuf[3] = divisor;
mce_dbg(ir->dev, "%s: requesting %u HZ "
"carrier\n", __func__, carrier);
/* Transmit new carrier to mce device */
mce_async_out(ir, cmdbuf, sizeof(cmdbuf));
return carrier;
}
}
return -EINVAL;
}
return carrier;
}
/*
* We don't do anything but print debug spew for many of the command bits
* we receive from the hardware, but some of them are useful information
* we want to store so that we can use them.
*/
static void mceusb_handle_command(struct mceusb_dev *ir, int index)
{
u8 hi = ir->buf_in[index + 1] & 0xff;
u8 lo = ir->buf_in[index + 2] & 0xff;
switch (ir->buf_in[index]) {
/* the one and only 5-byte return value command */
case MCE_RSP_GETPORTSTATUS:
if ((ir->buf_in[index + 4] & 0xff) == 0x00)
ir->txports_cabled |= 1 << hi;
break;
/* 2-byte return value commands */
case MCE_RSP_EQIRTIMEOUT:
ir->rc->timeout = US_TO_NS((hi << 8 | lo) * MCE_TIME_UNIT);
break;
case MCE_RSP_EQIRNUMPORTS:
ir->num_txports = hi;
ir->num_rxports = lo;
break;
/* 1-byte return value commands */
case MCE_RSP_EQEMVER:
ir->emver = hi;
break;
case MCE_RSP_EQIRTXPORTS:
ir->tx_mask = hi;
break;
case MCE_RSP_EQIRRXPORTEN:
ir->learning_enabled = ((hi & 0x02) == 0x02);
ir->rxports_active = hi;
break;
case MCE_RSP_CMD_ILLEGAL:
ir->need_reset = true;
break;
default:
break;
}
}
static void mceusb_process_ir_data(struct mceusb_dev *ir, int buf_len)
{
DEFINE_IR_RAW_EVENT(rawir);
bool event = false;
int i = 0;
/* skip meaningless 0xb1 0x60 header bytes on orig receiver */
if (ir->flags.microsoft_gen1)
i = 2;
/* if there's no data, just return now */
if (buf_len <= i)
return;
for (; i < buf_len; i++) {
switch (ir->parser_state) {
case SUBCMD:
ir->rem = mceusb_cmd_datasize(ir->cmd, ir->buf_in[i]);
mceusb_dev_printdata(ir, ir->buf_in, i - 1,
ir->rem + 2, false);
mceusb_handle_command(ir, i);
ir->parser_state = CMD_DATA;
break;
case PARSE_IRDATA:
ir->rem--;
init_ir_raw_event(&rawir);
rawir.pulse = ((ir->buf_in[i] & MCE_PULSE_BIT) != 0);
rawir.duration = (ir->buf_in[i] & MCE_PULSE_MASK)
* US_TO_NS(MCE_TIME_UNIT);
mce_dbg(ir->dev, "Storing %s with duration %d\n",
rawir.pulse ? "pulse" : "space",
rawir.duration);
if (ir_raw_event_store_with_filter(ir->rc, &rawir))
event = true;
break;
case CMD_DATA:
ir->rem--;
break;
case CMD_HEADER:
/* decode mce packets of the form (84),AA,BB,CC,DD */
/* IR data packets can span USB messages - rem */
ir->cmd = ir->buf_in[i];
if ((ir->cmd == MCE_CMD_PORT_IR) ||
((ir->cmd & MCE_PORT_MASK) !=
MCE_COMMAND_IRDATA)) {
ir->parser_state = SUBCMD;
continue;
}
ir->rem = (ir->cmd & MCE_PACKET_LENGTH_MASK);
mceusb_dev_printdata(ir, ir->buf_in,
i, ir->rem + 1, false);
if (ir->rem)
ir->parser_state = PARSE_IRDATA;
else
ir_raw_event_reset(ir->rc);
break;
}
if (ir->parser_state != CMD_HEADER && !ir->rem)
ir->parser_state = CMD_HEADER;
}
if (event) {
mce_dbg(ir->dev, "processed IR data, calling ir_raw_event_handle\n");
ir_raw_event_handle(ir->rc);
}
}
static void mceusb_dev_recv(struct urb *urb)
{
struct mceusb_dev *ir;
int buf_len;
if (!urb)
return;
ir = urb->context;
if (!ir) {
usb_unlink_urb(urb);
return;
}
buf_len = urb->actual_length;
if (ir->send_flags == RECV_FLAG_IN_PROGRESS) {
ir->send_flags = SEND_FLAG_COMPLETE;
mce_dbg(ir->dev, "setup answer received %d bytes\n",
buf_len);
}
switch (urb->status) {
/* success */
case 0:
mceusb_process_ir_data(ir, buf_len);
break;
case -ECONNRESET:
case -ENOENT:
case -ESHUTDOWN:
usb_unlink_urb(urb);
return;
case -EPIPE:
default:
mce_dbg(ir->dev, "Error: urb status = %d\n", urb->status);
break;
}
usb_submit_urb(urb, GFP_ATOMIC);
}
static void mceusb_get_emulator_version(struct mceusb_dev *ir)
{
/* If we get no reply or an illegal command reply, its ver 1, says MS */
ir->emver = 1;
mce_async_out(ir, GET_EMVER, sizeof(GET_EMVER));
}
static void mceusb_gen1_init(struct mceusb_dev *ir)
{
int ret;
struct device *dev = ir->dev;
char *data;
data = kzalloc(USB_CTRL_MSG_SZ, GFP_KERNEL);
if (!data) {
dev_err(dev, "%s: memory allocation failed!\n", __func__);
return;
}
/*
* This is a strange one. Windows issues a set address to the device
* on the receive control pipe and expect a certain value pair back
*/
ret = usb_control_msg(ir->usbdev, usb_rcvctrlpipe(ir->usbdev, 0),
USB_REQ_SET_ADDRESS, USB_TYPE_VENDOR, 0, 0,
data, USB_CTRL_MSG_SZ, HZ * 3);
mce_dbg(dev, "%s - ret = %d\n", __func__, ret);
mce_dbg(dev, "%s - data[0] = %d, data[1] = %d\n",
__func__, data[0], data[1]);
/* set feature: bit rate 38400 bps */
ret = usb_control_msg(ir->usbdev, usb_sndctrlpipe(ir->usbdev, 0),
USB_REQ_SET_FEATURE, USB_TYPE_VENDOR,
0xc04e, 0x0000, NULL, 0, HZ * 3);
mce_dbg(dev, "%s - ret = %d\n", __func__, ret);
/* bRequest 4: set char length to 8 bits */
ret = usb_control_msg(ir->usbdev, usb_sndctrlpipe(ir->usbdev, 0),
4, USB_TYPE_VENDOR,
0x0808, 0x0000, NULL, 0, HZ * 3);
mce_dbg(dev, "%s - retB = %d\n", __func__, ret);
/* bRequest 2: set handshaking to use DTR/DSR */
ret = usb_control_msg(ir->usbdev, usb_sndctrlpipe(ir->usbdev, 0),
2, USB_TYPE_VENDOR,
0x0000, 0x0100, NULL, 0, HZ * 3);
mce_dbg(dev, "%s - retC = %d\n", __func__, ret);
/* device resume */
mce_async_out(ir, DEVICE_RESUME, sizeof(DEVICE_RESUME));
/* get hw/sw revision? */
mce_async_out(ir, GET_REVISION, sizeof(GET_REVISION));
kfree(data);
}
static void mceusb_gen2_init(struct mceusb_dev *ir)
{
/* device resume */
mce_async_out(ir, DEVICE_RESUME, sizeof(DEVICE_RESUME));
/* get wake version (protocol, key, address) */
mce_async_out(ir, GET_WAKEVERSION, sizeof(GET_WAKEVERSION));
/* unknown what this one actually returns... */
mce_async_out(ir, GET_UNKNOWN2, sizeof(GET_UNKNOWN2));
}
static void mceusb_get_parameters(struct mceusb_dev *ir)
{
int i;
unsigned char cmdbuf[3] = { MCE_CMD_PORT_SYS,
MCE_CMD_GETPORTSTATUS, 0x00 };
/* defaults, if the hardware doesn't support querying */
ir->num_txports = 2;
ir->num_rxports = 2;
/* get number of tx and rx ports */
mce_async_out(ir, GET_NUM_PORTS, sizeof(GET_NUM_PORTS));
/* get the carrier and frequency */
mce_async_out(ir, GET_CARRIER_FREQ, sizeof(GET_CARRIER_FREQ));
if (ir->num_txports && !ir->flags.no_tx)
/* get the transmitter bitmask */
mce_async_out(ir, GET_TX_BITMASK, sizeof(GET_TX_BITMASK));
/* get receiver timeout value */
mce_async_out(ir, GET_RX_TIMEOUT, sizeof(GET_RX_TIMEOUT));
/* get receiver sensor setting */
mce_async_out(ir, GET_RX_SENSOR, sizeof(GET_RX_SENSOR));
for (i = 0; i < ir->num_txports; i++) {
cmdbuf[2] = i;
mce_async_out(ir, cmdbuf, sizeof(cmdbuf));
}
}
static void mceusb_flash_led(struct mceusb_dev *ir)
{
if (ir->emver < 2)
return;
mce_async_out(ir, FLASH_LED, sizeof(FLASH_LED));
}
static struct rc_dev *mceusb_init_rc_dev(struct mceusb_dev *ir)
{
struct device *dev = ir->dev;
struct rc_dev *rc;
int ret;
rc = rc_allocate_device();
if (!rc) {
dev_err(dev, "remote dev allocation failed\n");
goto out;
}
snprintf(ir->name, sizeof(ir->name), "%s (%04x:%04x)",
mceusb_model[ir->model].name ?
mceusb_model[ir->model].name :
"Media Center Ed. eHome Infrared Remote Transceiver",
le16_to_cpu(ir->usbdev->descriptor.idVendor),
le16_to_cpu(ir->usbdev->descriptor.idProduct));
usb_make_path(ir->usbdev, ir->phys, sizeof(ir->phys));
rc->input_name = ir->name;
rc->input_phys = ir->phys;
usb_to_input_id(ir->usbdev, &rc->input_id);
rc->dev.parent = dev;
rc->priv = ir;
rc->driver_type = RC_DRIVER_IR_RAW;
rc->allowed_protos = RC_BIT_ALL;
rc->timeout = MS_TO_NS(100);
if (!ir->flags.no_tx) {
rc->s_tx_mask = mceusb_set_tx_mask;
rc->s_tx_carrier = mceusb_set_tx_carrier;
rc->tx_ir = mceusb_tx_ir;
}
rc->driver_name = DRIVER_NAME;
rc->map_name = mceusb_model[ir->model].rc_map ?
mceusb_model[ir->model].rc_map : RC_MAP_RC6_MCE;
ret = rc_register_device(rc);
if (ret < 0) {
dev_err(dev, "remote dev registration failed\n");
goto out;
}
return rc;
out:
rc_free_device(rc);
return NULL;
}
static int mceusb_dev_probe(struct usb_interface *intf,
const struct usb_device_id *id)
{
struct usb_device *dev = interface_to_usbdev(intf);
struct usb_host_interface *idesc;
struct usb_endpoint_descriptor *ep = NULL;
struct usb_endpoint_descriptor *ep_in = NULL;
struct usb_endpoint_descriptor *ep_out = NULL;
struct mceusb_dev *ir = NULL;
int pipe, maxp, i;
char buf[63], name[128] = "";
enum mceusb_model_type model = id->driver_info;
bool is_gen3;
bool is_microsoft_gen1;
bool tx_mask_normal;
int ir_intfnum;
mce_dbg(&intf->dev, "%s called\n", __func__);
idesc = intf->cur_altsetting;
is_gen3 = mceusb_model[model].mce_gen3;
is_microsoft_gen1 = mceusb_model[model].mce_gen1;
tx_mask_normal = mceusb_model[model].tx_mask_normal;
ir_intfnum = mceusb_model[model].ir_intfnum;
/* There are multi-function devices with non-IR interfaces */
if (idesc->desc.bInterfaceNumber != ir_intfnum)
return -ENODEV;
/* step through the endpoints to find first bulk in and out endpoint */
for (i = 0; i < idesc->desc.bNumEndpoints; ++i) {
ep = &idesc->endpoint[i].desc;
if ((ep_in == NULL)
&& ((ep->bEndpointAddress & USB_ENDPOINT_DIR_MASK)
== USB_DIR_IN)
&& (((ep->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK)
== USB_ENDPOINT_XFER_BULK)
|| ((ep->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK)
== USB_ENDPOINT_XFER_INT))) {
ep_in = ep;
ep_in->bmAttributes = USB_ENDPOINT_XFER_INT;
ep_in->bInterval = 1;
mce_dbg(&intf->dev, "acceptable inbound endpoint "
"found\n");
}
if ((ep_out == NULL)
&& ((ep->bEndpointAddress & USB_ENDPOINT_DIR_MASK)
== USB_DIR_OUT)
&& (((ep->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK)
== USB_ENDPOINT_XFER_BULK)
|| ((ep->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK)
== USB_ENDPOINT_XFER_INT))) {
ep_out = ep;
ep_out->bmAttributes = USB_ENDPOINT_XFER_INT;
ep_out->bInterval = 1;
mce_dbg(&intf->dev, "acceptable outbound endpoint "
"found\n");
}
}
if (ep_in == NULL) {
mce_dbg(&intf->dev, "inbound and/or endpoint not found\n");
return -ENODEV;
}
pipe = usb_rcvintpipe(dev, ep_in->bEndpointAddress);
maxp = usb_maxpacket(dev, pipe, usb_pipeout(pipe));
ir = kzalloc(sizeof(struct mceusb_dev), GFP_KERNEL);
if (!ir)
goto mem_alloc_fail;
ir->buf_in = usb_alloc_coherent(dev, maxp, GFP_ATOMIC, &ir->dma_in);
if (!ir->buf_in)
goto buf_in_alloc_fail;
ir->urb_in = usb_alloc_urb(0, GFP_KERNEL);
if (!ir->urb_in)
goto urb_in_alloc_fail;
ir->usbdev = dev;
ir->dev = &intf->dev;
ir->len_in = maxp;
ir->flags.microsoft_gen1 = is_microsoft_gen1;
ir->flags.tx_mask_normal = tx_mask_normal;
ir->flags.no_tx = mceusb_model[model].no_tx;
ir->model = model;
/* Saving usb interface data for use by the transmitter routine */
ir->usb_ep_out = ep_out;
if (dev->descriptor.iManufacturer
&& usb_string(dev, dev->descriptor.iManufacturer,
buf, sizeof(buf)) > 0)
strlcpy(name, buf, sizeof(name));
if (dev->descriptor.iProduct
&& usb_string(dev, dev->descriptor.iProduct,
buf, sizeof(buf)) > 0)
snprintf(name + strlen(name), sizeof(name) - strlen(name),
" %s", buf);
ir->rc = mceusb_init_rc_dev(ir);
if (!ir->rc)
goto rc_dev_fail;
/* wire up inbound data handler */
usb_fill_int_urb(ir->urb_in, dev, pipe, ir->buf_in, maxp,
mceusb_dev_recv, ir, ep_in->bInterval);
ir->urb_in->transfer_dma = ir->dma_in;
ir->urb_in->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
/* flush buffers on the device */
mce_dbg(&intf->dev, "Flushing receive buffers\n");
mce_flush_rx_buffer(ir, maxp);
/* figure out which firmware/emulator version this hardware has */
mceusb_get_emulator_version(ir);
/* initialize device */
if (ir->flags.microsoft_gen1)
mceusb_gen1_init(ir);
else if (!is_gen3)
mceusb_gen2_init(ir);
mceusb_get_parameters(ir);
mceusb_flash_led(ir);
if (!ir->flags.no_tx)
mceusb_set_tx_mask(ir->rc, MCE_DEFAULT_TX_MASK);
usb_set_intfdata(intf, ir);
/* enable wake via this device */
device_set_wakeup_capable(ir->dev, true);
device_set_wakeup_enable(ir->dev, true);
dev_info(&intf->dev, "Registered %s with mce emulator interface "
"version %x\n", name, ir->emver);
dev_info(&intf->dev, "%x tx ports (0x%x cabled) and "
"%x rx sensors (0x%x active)\n",
ir->num_txports, ir->txports_cabled,
ir->num_rxports, ir->rxports_active);
return 0;
/* Error-handling path */
rc_dev_fail:
usb_free_urb(ir->urb_in);
urb_in_alloc_fail:
usb_free_coherent(dev, maxp, ir->buf_in, ir->dma_in);
buf_in_alloc_fail:
kfree(ir);
mem_alloc_fail:
dev_err(&intf->dev, "%s: device setup failed!\n", __func__);
return -ENOMEM;
}
static void mceusb_dev_disconnect(struct usb_interface *intf)
{
struct usb_device *dev = interface_to_usbdev(intf);
struct mceusb_dev *ir = usb_get_intfdata(intf);
usb_set_intfdata(intf, NULL);
if (!ir)
return;
ir->usbdev = NULL;
rc_unregister_device(ir->rc);
usb_kill_urb(ir->urb_in);
usb_free_urb(ir->urb_in);
usb_free_coherent(dev, ir->len_in, ir->buf_in, ir->dma_in);
kfree(ir);
}
static int mceusb_dev_suspend(struct usb_interface *intf, pm_message_t message)
{
struct mceusb_dev *ir = usb_get_intfdata(intf);
dev_info(ir->dev, "suspend\n");
usb_kill_urb(ir->urb_in);
return 0;
}
static int mceusb_dev_resume(struct usb_interface *intf)
{
struct mceusb_dev *ir = usb_get_intfdata(intf);
dev_info(ir->dev, "resume\n");
if (usb_submit_urb(ir->urb_in, GFP_ATOMIC))
return -EIO;
return 0;
}
static struct usb_driver mceusb_dev_driver = {
.name = DRIVER_NAME,
.probe = mceusb_dev_probe,
.disconnect = mceusb_dev_disconnect,
.suspend = mceusb_dev_suspend,
.resume = mceusb_dev_resume,
.reset_resume = mceusb_dev_resume,
.id_table = mceusb_dev_table
};
module_usb_driver(mceusb_dev_driver);
MODULE_DESCRIPTION(DRIVER_DESC);
MODULE_AUTHOR(DRIVER_AUTHOR);
MODULE_LICENSE("GPL");
MODULE_DEVICE_TABLE(usb, mceusb_dev_table);
module_param(debug, bool, S_IRUGO | S_IWUSR);
MODULE_PARM_DESC(debug, "Debug enabled or not");