- 根目录:
- drivers
- media
- pci
- bt8xx
- bttv-input.c
/*
*
* Copyright (c) 2003 Gerd Knorr
* Copyright (c) 2003 Pavel Machek
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
#include <linux/module.h>
#include <linux/init.h>
#include <linux/delay.h>
#include <linux/interrupt.h>
#include <linux/input.h>
#include <linux/slab.h>
#include "bttv.h"
#include "bttvp.h"
static int ir_debug;
module_param(ir_debug, int, 0644);
static int ir_rc5_remote_gap = 885;
module_param(ir_rc5_remote_gap, int, 0644);
#undef dprintk
#define dprintk(fmt, ...) \
do { \
if (ir_debug >= 1) \
pr_info(fmt, ##__VA_ARGS__); \
} while (0)
#define DEVNAME "bttv-input"
#define MODULE_NAME "bttv"
/* ---------------------------------------------------------------------- */
static void ir_handle_key(struct bttv *btv)
{
struct bttv_ir *ir = btv->remote;
u32 gpio,data;
/* read gpio value */
gpio = bttv_gpio_read(&btv->c);
if (ir->polling) {
if (ir->last_gpio == gpio)
return;
ir->last_gpio = gpio;
}
/* extract data */
data = ir_extract_bits(gpio, ir->mask_keycode);
dprintk("irq gpio=0x%x code=%d | %s%s%s\n",
gpio, data,
ir->polling ? "poll" : "irq",
(gpio & ir->mask_keydown) ? " down" : "",
(gpio & ir->mask_keyup) ? " up" : "");
if ((ir->mask_keydown && (gpio & ir->mask_keydown)) ||
(ir->mask_keyup && !(gpio & ir->mask_keyup))) {
rc_keydown_notimeout(ir->dev, data, 0);
} else {
/* HACK: Probably, ir->mask_keydown is missing
for this board */
if (btv->c.type == BTTV_BOARD_WINFAST2000)
rc_keydown_notimeout(ir->dev, data, 0);
rc_keyup(ir->dev);
}
}
static void ir_enltv_handle_key(struct bttv *btv)
{
struct bttv_ir *ir = btv->remote;
u32 gpio, data, keyup;
/* read gpio value */
gpio = bttv_gpio_read(&btv->c);
/* extract data */
data = ir_extract_bits(gpio, ir->mask_keycode);
/* Check if it is keyup */
keyup = (gpio & ir->mask_keyup) ? 1 << 31 : 0;
if ((ir->last_gpio & 0x7f) != data) {
dprintk("gpio=0x%x code=%d | %s\n",
gpio, data,
(gpio & ir->mask_keyup) ? " up" : "up/down");
rc_keydown_notimeout(ir->dev, data, 0);
if (keyup)
rc_keyup(ir->dev);
} else {
if ((ir->last_gpio & 1 << 31) == keyup)
return;
dprintk("(cnt) gpio=0x%x code=%d | %s\n",
gpio, data,
(gpio & ir->mask_keyup) ? " up" : "down");
if (keyup)
rc_keyup(ir->dev);
else
rc_keydown_notimeout(ir->dev, data, 0);
}
ir->last_gpio = data | keyup;
}
static int bttv_rc5_irq(struct bttv *btv);
void bttv_input_irq(struct bttv *btv)
{
struct bttv_ir *ir = btv->remote;
if (ir->rc5_gpio)
bttv_rc5_irq(btv);
else if (!ir->polling)
ir_handle_key(btv);
}
static void bttv_input_timer(unsigned long data)
{
struct bttv *btv = (struct bttv*)data;
struct bttv_ir *ir = btv->remote;
if (btv->c.type == BTTV_BOARD_ENLTV_FM_2)
ir_enltv_handle_key(btv);
else
ir_handle_key(btv);
mod_timer(&ir->timer, jiffies + msecs_to_jiffies(ir->polling));
}
/*
* FIXME: Nebula digi uses the legacy way to decode RC5, instead of relying
* on the rc-core way. As we need to be sure that both IRQ transitions are
* properly triggered, Better to touch it only with this hardware for
* testing.
*/
#define RC5_START(x) (((x) >> 12) & 3)
#define RC5_TOGGLE(x) (((x) >> 11) & 1)
#define RC5_ADDR(x) (((x) >> 6) & 31)
#define RC5_INSTR(x) ((x) & 63)
/* decode raw bit pattern to RC5 code */
static u32 bttv_rc5_decode(unsigned int code)
{
unsigned int org_code = code;
unsigned int pair;
unsigned int rc5 = 0;
int i;
for (i = 0; i < 14; ++i) {
pair = code & 0x3;
code >>= 2;
rc5 <<= 1;
switch (pair) {
case 0:
case 2:
break;
case 1:
rc5 |= 1;
break;
case 3:
dprintk("rc5_decode(%x) bad code\n",
org_code);
return 0;
}
}
dprintk("code=%x, rc5=%x, start=%x, toggle=%x, address=%x, "
"instr=%x\n", rc5, org_code, RC5_START(rc5),
RC5_TOGGLE(rc5), RC5_ADDR(rc5), RC5_INSTR(rc5));
return rc5;
}
static void bttv_rc5_timer_end(unsigned long data)
{
struct bttv_ir *ir = (struct bttv_ir *)data;
struct timeval tv;
u32 gap;
u32 rc5 = 0;
/* get time */
do_gettimeofday(&tv);
/* avoid overflow with gap >1s */
if (tv.tv_sec - ir->base_time.tv_sec > 1) {
gap = 200000;
} else {
gap = 1000000 * (tv.tv_sec - ir->base_time.tv_sec) +
tv.tv_usec - ir->base_time.tv_usec;
}
/* signal we're ready to start a new code */
ir->active = false;
/* Allow some timer jitter (RC5 is ~24ms anyway so this is ok) */
if (gap < 28000) {
dprintk("spurious timer_end\n");
return;
}
if (ir->last_bit < 20) {
/* ignore spurious codes (caused by light/other remotes) */
dprintk("short code: %x\n", ir->code);
} else {
ir->code = (ir->code << ir->shift_by) | 1;
rc5 = bttv_rc5_decode(ir->code);
/* two start bits? */
if (RC5_START(rc5) != ir->start) {
pr_info(DEVNAME ":"
" rc5 start bits invalid: %u\n", RC5_START(rc5));
/* right address? */
} else if (RC5_ADDR(rc5) == ir->addr) {
u32 toggle = RC5_TOGGLE(rc5);
u32 instr = RC5_INSTR(rc5);
/* Good code */
rc_keydown(ir->dev, instr, toggle);
dprintk("instruction %x, toggle %x\n",
instr, toggle);
}
}
}
static int bttv_rc5_irq(struct bttv *btv)
{
struct bttv_ir *ir = btv->remote;
struct timeval tv;
u32 gpio;
u32 gap;
unsigned long current_jiffies;
/* read gpio port */
gpio = bttv_gpio_read(&btv->c);
/* get time of bit */
current_jiffies = jiffies;
do_gettimeofday(&tv);
/* avoid overflow with gap >1s */
if (tv.tv_sec - ir->base_time.tv_sec > 1) {
gap = 200000;
} else {
gap = 1000000 * (tv.tv_sec - ir->base_time.tv_sec) +
tv.tv_usec - ir->base_time.tv_usec;
}
dprintk("RC5 IRQ: gap %d us for %s\n",
gap, (gpio & 0x20) ? "mark" : "space");
/* remote IRQ? */
if (!(gpio & 0x20))
return 0;
/* active code => add bit */
if (ir->active) {
/* only if in the code (otherwise spurious IRQ or timer
late) */
if (ir->last_bit < 28) {
ir->last_bit = (gap - ir_rc5_remote_gap / 2) /
ir_rc5_remote_gap;
ir->code |= 1 << ir->last_bit;
}
/* starting new code */
} else {
ir->active = true;
ir->code = 0;
ir->base_time = tv;
ir->last_bit = 0;
mod_timer(&ir->timer, current_jiffies + msecs_to_jiffies(30));
}
/* toggle GPIO pin 4 to reset the irq */
bttv_gpio_write(&btv->c, gpio & ~(1 << 4));
bttv_gpio_write(&btv->c, gpio | (1 << 4));
return 1;
}
/* ---------------------------------------------------------------------- */
static void bttv_ir_start(struct bttv *btv, struct bttv_ir *ir)
{
if (ir->polling) {
setup_timer(&ir->timer, bttv_input_timer, (unsigned long)btv);
ir->timer.expires = jiffies + msecs_to_jiffies(1000);
add_timer(&ir->timer);
} else if (ir->rc5_gpio) {
/* set timer_end for code completion */
setup_timer(&ir->timer, bttv_rc5_timer_end, (unsigned long)ir);
ir->shift_by = 1;
ir->start = 3;
ir->addr = 0x0;
ir->rc5_remote_gap = ir_rc5_remote_gap;
}
}
static void bttv_ir_stop(struct bttv *btv)
{
if (btv->remote->polling)
del_timer_sync(&btv->remote->timer);
if (btv->remote->rc5_gpio) {
u32 gpio;
del_timer_sync(&btv->remote->timer);
gpio = bttv_gpio_read(&btv->c);
bttv_gpio_write(&btv->c, gpio & ~(1 << 4));
}
}
/*
* Get_key functions used by I2C remotes
*/
static int get_key_pv951(struct IR_i2c *ir, u32 *ir_key, u32 *ir_raw)
{
unsigned char b;
/* poll IR chip */
if (1 != i2c_master_recv(ir->c, &b, 1)) {
dprintk("read error\n");
return -EIO;
}
/* ignore 0xaa */
if (b==0xaa)
return 0;
dprintk("key %02x\n", b);
/*
* NOTE:
* lirc_i2c maps the pv951 code as:
* addr = 0x61D6
* cmd = bit_reverse (b)
* So, it seems that this device uses NEC extended
* I decided to not fix the table, due to two reasons:
* 1) Without the actual device, this is only a guess;
* 2) As the addr is not reported via I2C, nor can be changed,
* the device is bound to the vendor-provided RC.
*/
*ir_key = b;
*ir_raw = b;
return 1;
}
/* Instantiate the I2C IR receiver device, if present */
void init_bttv_i2c_ir(struct bttv *btv)
{
const unsigned short addr_list[] = {
0x1a, 0x18, 0x64, 0x30, 0x71,
I2C_CLIENT_END
};
struct i2c_board_info info;
struct i2c_client *i2c_dev;
if (0 != btv->i2c_rc)
return;
memset(&info, 0, sizeof(struct i2c_board_info));
memset(&btv->init_data, 0, sizeof(btv->init_data));
strlcpy(info.type, "ir_video", I2C_NAME_SIZE);
switch (btv->c.type) {
case BTTV_BOARD_PV951:
btv->init_data.name = "PV951";
btv->init_data.get_key = get_key_pv951;
btv->init_data.ir_codes = RC_MAP_PV951;
info.addr = 0x4b;
break;
}
if (btv->init_data.name) {
info.platform_data = &btv->init_data;
i2c_dev = i2c_new_device(&btv->c.i2c_adap, &info);
} else {
/*
* The external IR receiver is at i2c address 0x34 (0x35 for
* reads). Future Hauppauge cards will have an internal
* receiver at 0x30 (0x31 for reads). In theory, both can be
* fitted, and Hauppauge suggest an external overrides an
* internal.
* That's why we probe 0x1a (~0x34) first. CB
*/
i2c_dev = i2c_new_probed_device(&btv->c.i2c_adap, &info, addr_list, NULL);
}
if (NULL == i2c_dev)
return;
#if defined(CONFIG_MODULES) && defined(MODULE)
request_module("ir-kbd-i2c");
#endif
}
int bttv_input_init(struct bttv *btv)
{
struct bttv_ir *ir;
char *ir_codes = NULL;
struct rc_dev *rc;
int err = -ENOMEM;
if (!btv->has_remote)
return -ENODEV;
ir = kzalloc(sizeof(*ir),GFP_KERNEL);
rc = rc_allocate_device();
if (!ir || !rc)
goto err_out_free;
/* detect & configure */
switch (btv->c.type) {
case BTTV_BOARD_AVERMEDIA:
case BTTV_BOARD_AVPHONE98:
case BTTV_BOARD_AVERMEDIA98:
ir_codes = RC_MAP_AVERMEDIA;
ir->mask_keycode = 0xf88000;
ir->mask_keydown = 0x010000;
ir->polling = 50; // ms
break;
case BTTV_BOARD_AVDVBT_761:
case BTTV_BOARD_AVDVBT_771:
ir_codes = RC_MAP_AVERMEDIA_DVBT;
ir->mask_keycode = 0x0f00c0;
ir->mask_keydown = 0x000020;
ir->polling = 50; // ms
break;
case BTTV_BOARD_PXELVWPLTVPAK:
ir_codes = RC_MAP_PIXELVIEW;
ir->mask_keycode = 0x003e00;
ir->mask_keyup = 0x010000;
ir->polling = 50; // ms
break;
case BTTV_BOARD_PV_M4900:
case BTTV_BOARD_PV_BT878P_9B:
case BTTV_BOARD_PV_BT878P_PLUS:
ir_codes = RC_MAP_PIXELVIEW;
ir->mask_keycode = 0x001f00;
ir->mask_keyup = 0x008000;
ir->polling = 50; // ms
break;
case BTTV_BOARD_WINFAST2000:
ir_codes = RC_MAP_WINFAST;
ir->mask_keycode = 0x1f8;
break;
case BTTV_BOARD_MAGICTVIEW061:
case BTTV_BOARD_MAGICTVIEW063:
ir_codes = RC_MAP_WINFAST;
ir->mask_keycode = 0x0008e000;
ir->mask_keydown = 0x00200000;
break;
case BTTV_BOARD_APAC_VIEWCOMP:
ir_codes = RC_MAP_APAC_VIEWCOMP;
ir->mask_keycode = 0x001f00;
ir->mask_keyup = 0x008000;
ir->polling = 50; // ms
break;
case BTTV_BOARD_ASKEY_CPH03X:
case BTTV_BOARD_CONCEPTRONIC_CTVFMI2:
case BTTV_BOARD_CONTVFMI:
ir_codes = RC_MAP_PIXELVIEW;
ir->mask_keycode = 0x001F00;
ir->mask_keyup = 0x006000;
ir->polling = 50; // ms
break;
case BTTV_BOARD_NEBULA_DIGITV:
ir_codes = RC_MAP_NEBULA;
ir->rc5_gpio = true;
break;
case BTTV_BOARD_MACHTV_MAGICTV:
ir_codes = RC_MAP_APAC_VIEWCOMP;
ir->mask_keycode = 0x001F00;
ir->mask_keyup = 0x004000;
ir->polling = 50; /* ms */
break;
case BTTV_BOARD_KOZUMI_KTV_01C:
ir_codes = RC_MAP_PCTV_SEDNA;
ir->mask_keycode = 0x001f00;
ir->mask_keyup = 0x006000;
ir->polling = 50; /* ms */
break;
case BTTV_BOARD_ENLTV_FM_2:
ir_codes = RC_MAP_ENCORE_ENLTV2;
ir->mask_keycode = 0x00fd00;
ir->mask_keyup = 0x000080;
ir->polling = 1; /* ms */
ir->last_gpio = ir_extract_bits(bttv_gpio_read(&btv->c),
ir->mask_keycode);
break;
}
if (NULL == ir_codes) {
dprintk("Ooops: IR config error [card=%d]\n", btv->c.type);
err = -ENODEV;
goto err_out_free;
}
if (ir->rc5_gpio) {
u32 gpio;
/* enable remote irq */
bttv_gpio_inout(&btv->c, (1 << 4), 1 << 4);
gpio = bttv_gpio_read(&btv->c);
bttv_gpio_write(&btv->c, gpio & ~(1 << 4));
bttv_gpio_write(&btv->c, gpio | (1 << 4));
} else {
/* init hardware-specific stuff */
bttv_gpio_inout(&btv->c, ir->mask_keycode | ir->mask_keydown, 0);
}
/* init input device */
ir->dev = rc;
snprintf(ir->name, sizeof(ir->name), "bttv IR (card=%d)",
btv->c.type);
snprintf(ir->phys, sizeof(ir->phys), "pci-%s/ir0",
pci_name(btv->c.pci));
rc->input_name = ir->name;
rc->input_phys = ir->phys;
rc->input_id.bustype = BUS_PCI;
rc->input_id.version = 1;
if (btv->c.pci->subsystem_vendor) {
rc->input_id.vendor = btv->c.pci->subsystem_vendor;
rc->input_id.product = btv->c.pci->subsystem_device;
} else {
rc->input_id.vendor = btv->c.pci->vendor;
rc->input_id.product = btv->c.pci->device;
}
rc->dev.parent = &btv->c.pci->dev;
rc->map_name = ir_codes;
rc->driver_name = MODULE_NAME;
btv->remote = ir;
bttv_ir_start(btv, ir);
/* all done */
err = rc_register_device(rc);
if (err)
goto err_out_stop;
return 0;
err_out_stop:
bttv_ir_stop(btv);
btv->remote = NULL;
err_out_free:
rc_free_device(rc);
kfree(ir);
return err;
}
void bttv_input_fini(struct bttv *btv)
{
if (btv->remote == NULL)
return;
bttv_ir_stop(btv);
rc_unregister_device(btv->remote->dev);
kfree(btv->remote);
btv->remote = NULL;
}