1. 根目录:
2. arch
3. mips
4. powertv
5. asic
6. asic-gaia.c

/*
 * Locations of devices in the Gaia ASIC
 *
 * Copyright (C) 2005-2009 Scientific-Atlanta, Inc.
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation; either version 2 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
 *
 * Author:	 David VomLehn
 */

#include <linux/init.h>
#include <asm/mach-powertv/asic.h>

const struct register_map gaia_register_map __initconst = {
	.eic_slow0_strt_add = {.phys = GAIA_IO_BASE + 0x000000},
	.eic_cfg_bits = {.phys = GAIA_IO_BASE + 0x000038},
	.eic_ready_status = {.phys = GAIA_IO_BASE + 0x00004C},

	.chipver3 = {.phys = GAIA_IO_BASE + 0x2A0800},
	.chipver2 = {.phys = GAIA_IO_BASE + 0x2A0804},
	.chipver1 = {.phys = GAIA_IO_BASE + 0x2A0808},
	.chipver0 = {.phys = GAIA_IO_BASE + 0x2A080C},

	/* The registers of IRBlaster */
	.uart1_intstat = {.phys = GAIA_IO_BASE + 0x2A1800},
	.uart1_inten = {.phys = GAIA_IO_BASE + 0x2A1804},
	.uart1_config1 = {.phys = GAIA_IO_BASE + 0x2A1808},
	.uart1_config2 = {.phys = GAIA_IO_BASE + 0x2A180C},
	.uart1_divisorhi = {.phys = GAIA_IO_BASE + 0x2A1810},
	.uart1_divisorlo = {.phys = GAIA_IO_BASE + 0x2A1814},
	.uart1_data = {.phys = GAIA_IO_BASE + 0x2A1818},
	.uart1_status = {.phys = GAIA_IO_BASE + 0x2A181C},

	.int_stat_3 = {.phys = GAIA_IO_BASE + 0x2A2800},
	.int_stat_2 = {.phys = GAIA_IO_BASE + 0x2A2804},
	.int_stat_1 = {.phys = GAIA_IO_BASE + 0x2A2808},
	.int_stat_0 = {.phys = GAIA_IO_BASE + 0x2A280C},
	.int_config = {.phys = GAIA_IO_BASE + 0x2A2810},
	.int_int_scan = {.phys = GAIA_IO_BASE + 0x2A2818},
	.ien_int_3 = {.phys = GAIA_IO_BASE + 0x2A2830},
	.ien_int_2 = {.phys = GAIA_IO_BASE + 0x2A2834},
	.ien_int_1 = {.phys = GAIA_IO_BASE + 0x2A2838},
	.ien_int_0 = {.phys = GAIA_IO_BASE + 0x2A283C},
	.int_level_3_3 = {.phys = GAIA_IO_BASE + 0x2A2880},
	.int_level_3_2 = {.phys = GAIA_IO_BASE + 0x2A2884},
	.int_level_3_1 = {.phys = GAIA_IO_BASE + 0x2A2888},
	.int_level_3_0 = {.phys = GAIA_IO_BASE + 0x2A288C},
	.int_level_2_3 = {.phys = GAIA_IO_BASE + 0x2A2890},
	.int_level_2_2 = {.phys = GAIA_IO_BASE + 0x2A2894},
	.int_level_2_1 = {.phys = GAIA_IO_BASE + 0x2A2898},
	.int_level_2_0 = {.phys = GAIA_IO_BASE + 0x2A289C},
	.int_level_1_3 = {.phys = GAIA_IO_BASE + 0x2A28A0},
	.int_level_1_2 = {.phys = GAIA_IO_BASE + 0x2A28A4},
	.int_level_1_1 = {.phys = GAIA_IO_BASE + 0x2A28A8},
	.int_level_1_0 = {.phys = GAIA_IO_BASE + 0x2A28AC},
	.int_level_0_3 = {.phys = GAIA_IO_BASE + 0x2A28B0},
	.int_level_0_2 = {.phys = GAIA_IO_BASE + 0x2A28B4},
	.int_level_0_1 = {.phys = GAIA_IO_BASE + 0x2A28B8},
	.int_level_0_0 = {.phys = GAIA_IO_BASE + 0x2A28BC},
	.int_docsis_en = {.phys = GAIA_IO_BASE + 0x2A28F4},

	.mips_pll_setup = {.phys = GAIA_IO_BASE + 0x1C0000},
	.fs432x4b4_usb_ctl = {.phys = GAIA_IO_BASE + 0x1C0024},
	.test_bus = {.phys = GAIA_IO_BASE + 0x1C00CC},
	.crt_spare = {.phys = GAIA_IO_BASE + 0x1c0108},
	.usb2_ohci_int_mask = {.phys = GAIA_IO_BASE + 0x20000C},
	.usb2_strap = {.phys = GAIA_IO_BASE + 0x200014},
	.ehci_hcapbase = {.phys = GAIA_IO_BASE + 0x21FE00},
	.ohci_hc_revision = {.phys = GAIA_IO_BASE + 0x21fc00},
	.bcm1_bs_lmi_steer = {.phys = GAIA_IO_BASE + 0x2E0004},
	.usb2_control = {.phys = GAIA_IO_BASE + 0x2E004C},
	.usb2_stbus_obc = {.phys = GAIA_IO_BASE + 0x21FF00},
	.usb2_stbus_mess_size = {.phys = GAIA_IO_BASE + 0x21FF04},
	.usb2_stbus_chunk_size = {.phys = GAIA_IO_BASE + 0x21FF08},

	.pcie_regs = {.phys = GAIA_IO_BASE + 0x220000},
	.tim_ch = {.phys = GAIA_IO_BASE + 0x2A2C10},
	.tim_cl = {.phys = GAIA_IO_BASE + 0x2A2C14},
	.gpio_dout = {.phys = GAIA_IO_BASE + 0x2A2C20},
	.gpio_din = {.phys = GAIA_IO_BASE + 0x2A2C24},
	.gpio_dir = {.phys = GAIA_IO_BASE + 0x2A2C2C},
	.watchdog = {.phys = GAIA_IO_BASE + 0x2A2C30},
	.front_panel = {.phys = GAIA_IO_BASE + 0x2A3800},
};