1. 根目录:
2. arch
3. mips
4. include
5. asm
6. mach-pmcs-msp71xx
7. msp_cic_int.h

/*
 * Defines for the MSP interrupt controller.
 *
 * Copyright (C) 1999 MIPS Technologies, Inc.  All rights reserved.
 * Author: Carsten Langgaard, carstenl@mips.com
 *
 * ########################################################################
 *
 *  This program is free software; you can distribute it and/or modify it
 *  under the terms of the GNU General Public License (Version 2) as
 *  published by the Free Software Foundation.
 *
 *  This program is distributed in the hope it will be useful, but WITHOUT
 *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
 *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
 *  for more details.
 *
 *  You should have received a copy of the GNU General Public License along
 *  with this program; if not, write to the Free Software Foundation, Inc.,
 *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
 *
 * ########################################################################
 */

#ifndef _MSP_CIC_INT_H
#define _MSP_CIC_INT_H

/*
 * The PMC-Sierra CIC interrupts are all centrally managed by the
 * CIC sub-system.
 * We attempt to keep the interrupt numbers as consistent as possible
 * across all of the MSP devices, but some differences will creep in ...
 * The interrupts which are directly forwarded to the MIPS core interrupts
 * are assigned interrupts in the range 0-7, interrupts cascaded through
 * the CIC are assigned interrupts 8-39.  The cascade occurs on C_IRQ4
 * (MSP_INT_CIC).  Currently we don't really distinguish between VPE1
 * and VPE0 (or thread contexts for that matter).  Will have to fix.
 * The PER interrupts are assigned interrupts in the range 40-71.
*/


/*
 * IRQs directly forwarded to the CPU
 */
#define MSP_MIPS_INTBASE	0
#define MSP_INT_SW0		0	/* IRQ for swint0,	 C_SW0	*/
#define MSP_INT_SW1		1	/* IRQ for swint1,	 C_SW1	*/
#define MSP_INT_MAC0		2	/* IRQ for MAC 0,	 C_IRQ0 */
#define MSP_INT_MAC1		3	/* IRQ for MAC 1,	 C_IRQ1 */
#define MSP_INT_USB		4	/* IRQ for USB,		 C_IRQ2 */
#define MSP_INT_SAR		5	/* IRQ for ADSL2+ SAR,	 C_IRQ3 */
#define MSP_INT_CIC		6	/* IRQ for CIC block,	 C_IRQ4 */
#define MSP_INT_SEC		7	/* IRQ for Sec engine,	 C_IRQ5 */

/*
 * IRQs cascaded on CPU interrupt 4 (CAUSE bit 12, C_IRQ4)
 * These defines should be tied to the register definitions for the CIC
 * interrupt routine.  For now, just use hard-coded values.
 */
#define MSP_CIC_INTBASE		(MSP_MIPS_INTBASE + 8)
#define MSP_INT_EXT0		(MSP_CIC_INTBASE + 0)
					/* External interrupt 0		*/
#define MSP_INT_EXT1		(MSP_CIC_INTBASE + 1)
					/* External interrupt 1		*/
#define MSP_INT_EXT2		(MSP_CIC_INTBASE + 2)
					/* External interrupt 2		*/
#define MSP_INT_EXT3		(MSP_CIC_INTBASE + 3)
					/* External interrupt 3		*/
#define MSP_INT_CPUIF		(MSP_CIC_INTBASE + 4)
					/* CPU interface interrupt	*/
#define MSP_INT_EXT4		(MSP_CIC_INTBASE + 5)
					/* External interrupt 4		*/
#define MSP_INT_CIC_USB		(MSP_CIC_INTBASE + 6)
					/* Cascaded IRQ for USB		*/
#define MSP_INT_MBOX		(MSP_CIC_INTBASE + 7)
					/* Sec engine mailbox IRQ	*/
#define MSP_INT_EXT5		(MSP_CIC_INTBASE + 8)
					/* External interrupt 5		*/
#define MSP_INT_TDM		(MSP_CIC_INTBASE + 9)
					/* TDM interrupt		*/
#define MSP_INT_CIC_MAC0	(MSP_CIC_INTBASE + 10)
					/* Cascaded IRQ for MAC 0	*/
#define MSP_INT_CIC_MAC1	(MSP_CIC_INTBASE + 11)
					/* Cascaded IRQ for MAC 1	*/
#define MSP_INT_CIC_SEC		(MSP_CIC_INTBASE + 12)
					/* Cascaded IRQ for sec engine	*/
#define MSP_INT_PER		(MSP_CIC_INTBASE + 13)
					/* Peripheral interrupt		*/
#define MSP_INT_TIMER0		(MSP_CIC_INTBASE + 14)
					/* SLP timer 0			*/
#define MSP_INT_TIMER1		(MSP_CIC_INTBASE + 15)
					/* SLP timer 1			*/
#define MSP_INT_TIMER2		(MSP_CIC_INTBASE + 16)
					/* SLP timer 2			*/
#define MSP_INT_VPE0_TIMER	(MSP_CIC_INTBASE + 17)
					/* VPE0 MIPS timer		*/
#define MSP_INT_BLKCP		(MSP_CIC_INTBASE + 18)
					/* Block Copy			*/
#define MSP_INT_UART0		(MSP_CIC_INTBASE + 19)
					/* UART 0			*/
#define MSP_INT_PCI		(MSP_CIC_INTBASE + 20)
					/* PCI subsystem		*/
#define MSP_INT_EXT6		(MSP_CIC_INTBASE + 21)
					/* External interrupt 5		*/
#define MSP_INT_PCI_MSI		(MSP_CIC_INTBASE + 22)
					/* PCI Message Signal		*/
#define MSP_INT_CIC_SAR		(MSP_CIC_INTBASE + 23)
					/* Cascaded ADSL2+ SAR IRQ	*/
#define MSP_INT_DSL		(MSP_CIC_INTBASE + 24)
					/* ADSL2+ IRQ			*/
#define MSP_INT_CIC_ERR		(MSP_CIC_INTBASE + 25)
					/* SLP error condition		*/
#define MSP_INT_VPE1_TIMER	(MSP_CIC_INTBASE + 26)
					/* VPE1 MIPS timer		*/
#define MSP_INT_VPE0_PC		(MSP_CIC_INTBASE + 27)
					/* VPE0 Performance counter	*/
#define MSP_INT_VPE1_PC		(MSP_CIC_INTBASE + 28)
					/* VPE1 Performance counter	*/
#define MSP_INT_EXT7		(MSP_CIC_INTBASE + 29)
					/* External interrupt 5		*/
#define MSP_INT_VPE0_SW		(MSP_CIC_INTBASE + 30)
					/* VPE0 Software interrupt	*/
#define MSP_INT_VPE1_SW		(MSP_CIC_INTBASE + 31)
					/* VPE0 Software interrupt	*/

/*
 * IRQs cascaded on CIC PER interrupt (MSP_INT_PER)
 */
#define MSP_PER_INTBASE		(MSP_CIC_INTBASE + 32)
/* Reserved					   0-1			*/
#define MSP_INT_UART1		(MSP_PER_INTBASE + 2)
					/* UART 1			*/
/* Reserved					   3-5			*/
#define MSP_INT_2WIRE		(MSP_PER_INTBASE + 6)
					/* 2-wire			*/
#define MSP_INT_TM0		(MSP_PER_INTBASE + 7)
					/* Peripheral timer block out 0 */
#define MSP_INT_TM1		(MSP_PER_INTBASE + 8)
					/* Peripheral timer block out 1 */
/* Reserved					   9			*/
#define MSP_INT_SPRX		(MSP_PER_INTBASE + 10)
					/* SPI RX complete		*/
#define MSP_INT_SPTX		(MSP_PER_INTBASE + 11)
					/* SPI TX complete		*/
#define MSP_INT_GPIO		(MSP_PER_INTBASE + 12)
					/* GPIO				*/
#define MSP_INT_PER_ERR		(MSP_PER_INTBASE + 13)
					/* Peripheral error		*/
/* Reserved					   14-31		*/

#endif /* !_MSP_CIC_INT_H */