- 根目录:
- arch
- arm
- mach-kirkwood
- netxbig_v2-setup.c
/*
* arch/arm/mach-kirkwood/netxbig_v2-setup.c
*
* LaCie 2Big and 5Big Network v2 board setup
*
* Copyright (C) 2010 Simon Guinot <sguinot@lacie.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/ata_platform.h>
#include <linux/mv643xx_eth.h>
#include <linux/input.h>
#include <linux/gpio.h>
#include <linux/gpio_keys.h>
#include <linux/leds.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <mach/kirkwood.h>
#include <linux/platform_data/leds-kirkwood-netxbig.h>
#include "common.h"
#include "mpp.h"
#include "lacie_v2-common.h"
/*****************************************************************************
* Ethernet
****************************************************************************/
static struct mv643xx_eth_platform_data netxbig_v2_ge00_data = {
.phy_addr = MV643XX_ETH_PHY_ADDR(8),
};
static struct mv643xx_eth_platform_data netxbig_v2_ge01_data = {
.phy_addr = MV643XX_ETH_PHY_ADDR(0),
};
/*****************************************************************************
* SATA
****************************************************************************/
static struct mv_sata_platform_data netxbig_v2_sata_data = {
.n_ports = 2,
};
/*****************************************************************************
* GPIO keys
****************************************************************************/
#define NETXBIG_V2_GPIO_SWITCH_POWER_ON 13
#define NETXBIG_V2_GPIO_SWITCH_POWER_OFF 15
#define NETXBIG_V2_GPIO_FUNC_BUTTON 34
#define NETXBIG_V2_SWITCH_POWER_ON 0x1
#define NETXBIG_V2_SWITCH_POWER_OFF 0x2
static struct gpio_keys_button netxbig_v2_buttons[] = {
[0] = {
.type = EV_SW,
.code = NETXBIG_V2_SWITCH_POWER_ON,
.gpio = NETXBIG_V2_GPIO_SWITCH_POWER_ON,
.desc = "Back power switch (on|auto)",
.active_low = 1,
},
[1] = {
.type = EV_SW,
.code = NETXBIG_V2_SWITCH_POWER_OFF,
.gpio = NETXBIG_V2_GPIO_SWITCH_POWER_OFF,
.desc = "Back power switch (auto|off)",
.active_low = 1,
},
[2] = {
.code = KEY_OPTION,
.gpio = NETXBIG_V2_GPIO_FUNC_BUTTON,
.desc = "Function button",
.active_low = 1,
},
};
static struct gpio_keys_platform_data netxbig_v2_button_data = {
.buttons = netxbig_v2_buttons,
.nbuttons = ARRAY_SIZE(netxbig_v2_buttons),
};
static struct platform_device netxbig_v2_gpio_buttons = {
.name = "gpio-keys",
.id = -1,
.dev = {
.platform_data = &netxbig_v2_button_data,
},
};
/*****************************************************************************
* GPIO extension LEDs
****************************************************************************/
/*
* The LEDs are controlled by a CPLD and can be configured through a GPIO
* extension bus:
*
* - address register : bit [0-2] -> GPIO [47-49]
* - data register : bit [0-2] -> GPIO [44-46]
* - enable register : GPIO 29
*/
static int netxbig_v2_gpio_ext_addr[] = { 47, 48, 49 };
static int netxbig_v2_gpio_ext_data[] = { 44, 45, 46 };
static struct netxbig_gpio_ext netxbig_v2_gpio_ext = {
.addr = netxbig_v2_gpio_ext_addr,
.num_addr = ARRAY_SIZE(netxbig_v2_gpio_ext_addr),
.data = netxbig_v2_gpio_ext_data,
.num_data = ARRAY_SIZE(netxbig_v2_gpio_ext_data),
.enable = 29,
};
/*
* Address register selection:
*
* addr | register
* ----------------------------
* 0 | front LED
* 1 | front LED brightness
* 2 | SATA LED brightness
* 3 | SATA0 LED
* 4 | SATA1 LED
* 5 | SATA2 LED
* 6 | SATA3 LED
* 7 | SATA4 LED
*
* Data register configuration:
*
* data | LED brightness
* -------------------------------------------------
* 0 | min (off)
* - | -
* 7 | max
*
* data | front LED mode
* -------------------------------------------------
* 0 | fix off
* 1 | fix blue on
* 2 | fix red on
* 3 | blink blue on=1 sec and blue off=1 sec
* 4 | blink red on=1 sec and red off=1 sec
* 5 | blink blue on=2.5 sec and red on=0.5 sec
* 6 | blink blue on=1 sec and red on=1 sec
* 7 | blink blue on=0.5 sec and blue off=2.5 sec
*
* data | SATA LED mode
* -------------------------------------------------
* 0 | fix off
* 1 | SATA activity blink
* 2 | fix red on
* 3 | blink blue on=1 sec and blue off=1 sec
* 4 | blink red on=1 sec and red off=1 sec
* 5 | blink blue on=2.5 sec and red on=0.5 sec
* 6 | blink blue on=1 sec and red on=1 sec
* 7 | fix blue on
*/
static int netxbig_v2_red_mled[NETXBIG_LED_MODE_NUM] = {
[NETXBIG_LED_OFF] = 0,
[NETXBIG_LED_ON] = 2,
[NETXBIG_LED_SATA] = NETXBIG_LED_INVALID_MODE,
[NETXBIG_LED_TIMER1] = 4,
[NETXBIG_LED_TIMER2] = NETXBIG_LED_INVALID_MODE,
};
static int netxbig_v2_blue_pwr_mled[NETXBIG_LED_MODE_NUM] = {
[NETXBIG_LED_OFF] = 0,
[NETXBIG_LED_ON] = 1,
[NETXBIG_LED_SATA] = NETXBIG_LED_INVALID_MODE,
[NETXBIG_LED_TIMER1] = 3,
[NETXBIG_LED_TIMER2] = 7,
};
static int netxbig_v2_blue_sata_mled[NETXBIG_LED_MODE_NUM] = {
[NETXBIG_LED_OFF] = 0,
[NETXBIG_LED_ON] = 7,
[NETXBIG_LED_SATA] = 1,
[NETXBIG_LED_TIMER1] = 3,
[NETXBIG_LED_TIMER2] = NETXBIG_LED_INVALID_MODE,
};
static struct netxbig_led_timer netxbig_v2_led_timer[] = {
[0] = {
.delay_on = 500,
.delay_off = 500,
.mode = NETXBIG_LED_TIMER1,
},
[1] = {
.delay_on = 500,
.delay_off = 1000,
.mode = NETXBIG_LED_TIMER2,
},
};
#define NETXBIG_LED(_name, maddr, mval, baddr) \
{ .name = _name, \
.mode_addr = maddr, \
.mode_val = mval, \
.bright_addr = baddr }
static struct netxbig_led net2big_v2_leds_ctrl[] = {
NETXBIG_LED("net2big-v2:blue:power", 0, netxbig_v2_blue_pwr_mled, 1),
NETXBIG_LED("net2big-v2:red:power", 0, netxbig_v2_red_mled, 1),
NETXBIG_LED("net2big-v2:blue:sata0", 3, netxbig_v2_blue_sata_mled, 2),
NETXBIG_LED("net2big-v2:red:sata0", 3, netxbig_v2_red_mled, 2),
NETXBIG_LED("net2big-v2:blue:sata1", 4, netxbig_v2_blue_sata_mled, 2),
NETXBIG_LED("net2big-v2:red:sata1", 4, netxbig_v2_red_mled, 2),
};
static struct netxbig_led_platform_data net2big_v2_leds_data = {
.gpio_ext = &netxbig_v2_gpio_ext,
.timer = netxbig_v2_led_timer,
.num_timer = ARRAY_SIZE(netxbig_v2_led_timer),
.leds = net2big_v2_leds_ctrl,
.num_leds = ARRAY_SIZE(net2big_v2_leds_ctrl),
};
static struct netxbig_led net5big_v2_leds_ctrl[] = {
NETXBIG_LED("net5big-v2:blue:power", 0, netxbig_v2_blue_pwr_mled, 1),
NETXBIG_LED("net5big-v2:red:power", 0, netxbig_v2_red_mled, 1),
NETXBIG_LED("net5big-v2:blue:sata0", 3, netxbig_v2_blue_sata_mled, 2),
NETXBIG_LED("net5big-v2:red:sata0", 3, netxbig_v2_red_mled, 2),
NETXBIG_LED("net5big-v2:blue:sata1", 4, netxbig_v2_blue_sata_mled, 2),
NETXBIG_LED("net5big-v2:red:sata1", 4, netxbig_v2_red_mled, 2),
NETXBIG_LED("net5big-v2:blue:sata2", 5, netxbig_v2_blue_sata_mled, 2),
NETXBIG_LED("net5big-v2:red:sata2", 5, netxbig_v2_red_mled, 2),
NETXBIG_LED("net5big-v2:blue:sata3", 6, netxbig_v2_blue_sata_mled, 2),
NETXBIG_LED("net5big-v2:red:sata3", 6, netxbig_v2_red_mled, 2),
NETXBIG_LED("net5big-v2:blue:sata4", 7, netxbig_v2_blue_sata_mled, 2),
NETXBIG_LED("net5big-v2:red:sata5", 7, netxbig_v2_red_mled, 2),
};
static struct netxbig_led_platform_data net5big_v2_leds_data = {
.gpio_ext = &netxbig_v2_gpio_ext,
.timer = netxbig_v2_led_timer,
.num_timer = ARRAY_SIZE(netxbig_v2_led_timer),
.leds = net5big_v2_leds_ctrl,
.num_leds = ARRAY_SIZE(net5big_v2_leds_ctrl),
};
static struct platform_device netxbig_v2_leds = {
.name = "leds-netxbig",
.id = -1,
.dev = {
.platform_data = &net2big_v2_leds_data,
},
};
/*****************************************************************************
* General Setup
****************************************************************************/
static unsigned int net2big_v2_mpp_config[] __initdata = {
MPP0_SPI_SCn,
MPP1_SPI_MOSI,
MPP2_SPI_SCK,
MPP3_SPI_MISO,
MPP6_SYSRST_OUTn,
MPP7_GPO, /* Request power-off */
MPP8_TW0_SDA,
MPP9_TW0_SCK,
MPP10_UART0_TXD,
MPP11_UART0_RXD,
MPP13_GPIO, /* Rear power switch (on|auto) */
MPP14_GPIO, /* USB fuse alarm */
MPP15_GPIO, /* Rear power switch (auto|off) */
MPP16_GPIO, /* SATA HDD1 power */
MPP17_GPIO, /* SATA HDD2 power */
MPP20_SATA1_ACTn,
MPP21_SATA0_ACTn,
MPP24_GPIO, /* USB mode select */
MPP26_GPIO, /* USB device vbus */
MPP28_GPIO, /* USB enable host vbus */
MPP29_GPIO, /* GPIO extension ALE */
MPP34_GPIO, /* Rear Push button */
MPP35_GPIO, /* Inhibit switch power-off */
MPP36_GPIO, /* SATA HDD1 presence */
MPP37_GPIO, /* SATA HDD2 presence */
MPP40_GPIO, /* eSATA presence */
MPP44_GPIO, /* GPIO extension (data 0) */
MPP45_GPIO, /* GPIO extension (data 1) */
MPP46_GPIO, /* GPIO extension (data 2) */
MPP47_GPIO, /* GPIO extension (addr 0) */
MPP48_GPIO, /* GPIO extension (addr 1) */
MPP49_GPIO, /* GPIO extension (addr 2) */
0
};
static unsigned int net5big_v2_mpp_config[] __initdata = {
MPP0_SPI_SCn,
MPP1_SPI_MOSI,
MPP2_SPI_SCK,
MPP3_SPI_MISO,
MPP6_SYSRST_OUTn,
MPP7_GPO, /* Request power-off */
MPP8_TW0_SDA,
MPP9_TW0_SCK,
MPP10_UART0_TXD,
MPP11_UART0_RXD,
MPP13_GPIO, /* Rear power switch (on|auto) */
MPP14_GPIO, /* USB fuse alarm */
MPP15_GPIO, /* Rear power switch (auto|off) */
MPP16_GPIO, /* SATA HDD1 power */
MPP17_GPIO, /* SATA HDD2 power */
MPP20_GE1_TXD0,
MPP21_GE1_TXD1,
MPP22_GE1_TXD2,
MPP23_GE1_TXD3,
MPP24_GE1_RXD0,
MPP25_GE1_RXD1,
MPP26_GE1_RXD2,
MPP27_GE1_RXD3,
MPP28_GPIO, /* USB enable host vbus */
MPP29_GPIO, /* GPIO extension ALE */
MPP30_GE1_RXCTL,
MPP31_GE1_RXCLK,
MPP32_GE1_TCLKOUT,
MPP33_GE1_TXCTL,
MPP34_GPIO, /* Rear Push button */
MPP35_GPIO, /* Inhibit switch power-off */
MPP36_GPIO, /* SATA HDD1 presence */
MPP37_GPIO, /* SATA HDD2 presence */
MPP38_GPIO, /* SATA HDD3 presence */
MPP39_GPIO, /* SATA HDD4 presence */
MPP40_GPIO, /* SATA HDD5 presence */
MPP41_GPIO, /* SATA HDD3 power */
MPP42_GPIO, /* SATA HDD4 power */
MPP43_GPIO, /* SATA HDD5 power */
MPP44_GPIO, /* GPIO extension (data 0) */
MPP45_GPIO, /* GPIO extension (data 1) */
MPP46_GPIO, /* GPIO extension (data 2) */
MPP47_GPIO, /* GPIO extension (addr 0) */
MPP48_GPIO, /* GPIO extension (addr 1) */
MPP49_GPIO, /* GPIO extension (addr 2) */
0
};
#define NETXBIG_V2_GPIO_POWER_OFF 7
static void netxbig_v2_power_off(void)
{
gpio_set_value(NETXBIG_V2_GPIO_POWER_OFF, 1);
}
static void __init netxbig_v2_init(void)
{
/*
* Basic setup. Needs to be called early.
*/
kirkwood_init();
if (machine_is_net2big_v2())
kirkwood_mpp_conf(net2big_v2_mpp_config);
else
kirkwood_mpp_conf(net5big_v2_mpp_config);
if (machine_is_net2big_v2())
lacie_v2_hdd_power_init(2);
else
lacie_v2_hdd_power_init(5);
kirkwood_ehci_init();
kirkwood_ge00_init(&netxbig_v2_ge00_data);
if (machine_is_net5big_v2())
kirkwood_ge01_init(&netxbig_v2_ge01_data);
kirkwood_sata_init(&netxbig_v2_sata_data);
kirkwood_uart0_init();
lacie_v2_register_flash();
lacie_v2_register_i2c_devices();
if (machine_is_net5big_v2())
netxbig_v2_leds.dev.platform_data = &net5big_v2_leds_data;
platform_device_register(&netxbig_v2_leds);
platform_device_register(&netxbig_v2_gpio_buttons);
if (gpio_request(NETXBIG_V2_GPIO_POWER_OFF, "power-off") == 0 &&
gpio_direction_output(NETXBIG_V2_GPIO_POWER_OFF, 0) == 0)
pm_power_off = netxbig_v2_power_off;
else
pr_err("netxbig_v2: failed to configure power-off GPIO\n");
}
#ifdef CONFIG_MACH_NET2BIG_V2
MACHINE_START(NET2BIG_V2, "LaCie 2Big Network v2")
.atag_offset = 0x100,
.init_machine = netxbig_v2_init,
.map_io = kirkwood_map_io,
.init_early = kirkwood_init_early,
.init_irq = kirkwood_init_irq,
.init_time = kirkwood_timer_init,
.restart = kirkwood_restart,
MACHINE_END
#endif
#ifdef CONFIG_MACH_NET5BIG_V2
MACHINE_START(NET5BIG_V2, "LaCie 5Big Network v2")
.atag_offset = 0x100,
.init_machine = netxbig_v2_init,
.map_io = kirkwood_map_io,
.init_early = kirkwood_init_early,
.init_irq = kirkwood_init_irq,
.init_time = kirkwood_timer_init,
.restart = kirkwood_restart,
MACHINE_END
#endif