/* * Header file required by picodlp panel driver * * Copyright (C) 2009-2011 Texas Instruments * Author: Mythri P K <mythripk@ti.com> * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License version 2 as published by * the Free Software Foundation. * * This program is distributed in the hope that it will be useful, but WITHOUT * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for * more details. * * You should have received a copy of the GNU General Public License along with * this program. If not, see <http://www.gnu.org/licenses/>. */ #ifndef __OMAP2_DISPLAY_PANEL_PICODLP_H #define __OMAP2_DISPLAY_PANEL_PICODLP_H /* Commands used for configuring picodlp panel */ #define MAIN_STATUS 0x03 #define PBC_CONTROL 0x08 #define INPUT_SOURCE 0x0B #define INPUT_RESOLUTION 0x0C #define DATA_FORMAT 0x0D #define IMG_ROTATION 0x0E #define LONG_FLIP 0x0F #define SHORT_FLIP 0x10 #define TEST_PAT_SELECT 0x11 #define R_DRIVE_CURRENT 0x12 #define G_DRIVE_CURRENT 0x13 #define B_DRIVE_CURRENT 0x14 #define READ_REG_SELECT 0x15 #define RGB_DRIVER_ENABLE 0x16 #define CPU_IF_MODE 0x18 #define FRAME_RATE 0x19 #define CPU_IF_SYNC_METHOD 0x1A #define CPU_IF_SOF 0x1B #define CPU_IF_EOF 0x1C #define CPU_IF_SLEEP 0x1D #define SEQUENCE_MODE 0x1E #define SOFT_RESET 0x1F #define FRONT_END_RESET 0x21 #define AUTO_PWR_ENABLE 0x22 #define VSYNC_LINE_DELAY 0x23 #define CPU_PI_HORIZ_START 0x24 #define CPU_PI_VERT_START 0x25 #define CPU_PI_HORIZ_WIDTH 0x26 #define CPU_PI_VERT_HEIGHT 0x27 #define PIXEL_MASK_CROP 0x28 #define CROP_FIRST_LINE 0x29 #define CROP_LAST_LINE 0x2A #define CROP_FIRST_PIXEL 0x2B #define CROP_LAST_PIXEL 0x2C #define DMD_PARK_TRIGGER 0x2D #define MISC_REG 0x30 /* AGC registers */ #define AGC_CTRL 0x50 #define AGC_CLIPPED_PIXS 0x55 #define AGC_BRIGHT_PIXS 0x56 #define AGC_BG_PIXS 0x57 #define AGC_SAFETY_MARGIN 0x17 /* Color Coordinate Adjustment registers */ #define CCA_ENABLE 0x5E #define CCA_C1A 0x5F #define CCA_C1B 0x60 #define CCA_C1C 0x61 #define CCA_C2A 0x62 #define CCA_C2B 0x63 #define CCA_C2C 0x64 #define CCA_C3A 0x65 #define CCA_C3B 0x66 #define CCA_C3C 0x67 #define CCA_C7A 0x71 #define CCA_C7B 0x72 #define CCA_C7C 0x73 /** * DLP Pico Processor 2600 comes with flash * We can do DMA operations from flash for accessing Look Up Tables */ #define DMA_STATUS 0x100 #define FLASH_ADDR_BYTES 0x74 #define FLASH_DUMMY_BYTES 0x75 #define FLASH_WRITE_BYTES 0x76 #define FLASH_READ_BYTES 0x77 #define FLASH_OPCODE 0x78 #define FLASH_START_ADDR 0x79 #define FLASH_DUMMY2 0x7A #define FLASH_WRITE_DATA 0x7B #define TEMPORAL_DITH_DISABLE 0x7E #define SEQ_CONTROL 0x82 #define SEQ_VECTOR 0x83 /* DMD is Digital Micromirror Device */ #define DMD_BLOCK_COUNT 0x84 #define DMD_VCC_CONTROL 0x86 #define DMD_PARK_PULSE_COUNT 0x87 #define DMD_PARK_PULSE_WIDTH 0x88 #define DMD_PARK_DELAY 0x89 #define DMD_SHADOW_ENABLE 0x8E #define SEQ_STATUS 0x8F #define FLASH_CLOCK_CONTROL 0x98 #define DMD_PARK 0x2D #define SDRAM_BIST_ENABLE 0x46 #define DDR_DRIVER_STRENGTH 0x9A #define SDC_ENABLE 0x9D #define SDC_BUFF_SWAP_DISABLE 0xA3 #define CURTAIN_CONTROL 0xA6 #define DDR_BUS_SWAP_ENABLE 0xA7 #define DMD_TRC_ENABLE 0xA8 #define DMD_BUS_SWAP_ENABLE 0xA9 #define ACTGEN_ENABLE 0xAE #define ACTGEN_CONTROL 0xAF #define ACTGEN_HORIZ_BP 0xB0 #define ACTGEN_VERT_BP 0xB1 /* Look Up Table access */ #define CMT_SPLASH_LUT_START_ADDR 0xFA #define CMT_SPLASH_LUT_DEST_SELECT 0xFB #define CMT_SPLASH_LUT_DATA 0xFC #define SEQ_RESET_LUT_START_ADDR 0xFD #define SEQ_RESET_LUT_DEST_SELECT 0xFE #define SEQ_RESET_LUT_DATA 0xFF /* Input source definitions */ #define PARALLEL_RGB 0 #define INT_TEST_PATTERN 1 #define SPLASH_SCREEN 2 #define CPU_INTF 3 #define BT656 4 /* Standard input resolution definitions */ #define QWVGA_LANDSCAPE 3 /* (427h*240v) */ #define WVGA_864_LANDSCAPE 21 /* (864h*480v) */ #define WVGA_DMD_OPTICAL_TEST 35 /* (608h*684v) */ /* Standard data format definitions */ #define RGB565 0 #define RGB666 1 #define RGB888 2 /* Test Pattern definitions */ #define TPG_CHECKERBOARD 0 #define TPG_BLACK 1 #define TPG_WHITE 2 #define TPG_RED 3 #define TPG_BLUE 4 #define TPG_GREEN 5 #define TPG_VLINES_BLACK 6 #define TPG_HLINES_BLACK 7 #define TPG_VLINES_ALT 8 #define TPG_HLINES_ALT 9 #define TPG_DIAG_LINES 10 #define TPG_GREYRAMP_VERT 11 #define TPG_GREYRAMP_HORIZ 12 #define TPG_ANSI_CHECKERBOARD 13 /* sequence mode definitions */ #define SEQ_FREE_RUN 0 #define SEQ_LOCK 1 /* curtain color definitions */ #define CURTAIN_BLACK 0 #define CURTAIN_RED 1 #define CURTAIN_GREEN 2 #define CURTAIN_BLUE 3 #define CURTAIN_YELLOW 4 #define CURTAIN_MAGENTA 5 #define CURTAIN_CYAN 6 #define CURTAIN_WHITE 7 /* LUT definitions */ #define CMT_LUT_NONE 0 #define CMT_LUT_GREEN 1 #define CMT_LUT_RED 2 #define CMT_LUT_BLUE 3 #define CMT_LUT_ALL 4 #define SPLASH_LUT 5 #define SEQ_LUT_NONE 0 #define SEQ_DRC_LUT_0 1 #define SEQ_DRC_LUT_1 2 #define SEQ_DRC_LUT_2 3 #define SEQ_DRC_LUT_3 4 #define SEQ_SEQ_LUT 5 #define SEQ_DRC_LUT_ALL 6 #define WPC_PROGRAM_LUT 7 #define BITSTREAM_START_ADDR 0x00000000 #define BITSTREAM_SIZE 0x00040000 #define WPC_FW_0_START_ADDR 0x00040000 #define WPC_FW_0_SIZE 0x00000ce8 #define SEQUENCE_0_START_ADDR 0x00044000 #define SEQUENCE_0_SIZE 0x00001000 #define SEQUENCE_1_START_ADDR 0x00045000 #define SEQUENCE_1_SIZE 0x00000d10 #define SEQUENCE_2_START_ADDR 0x00046000 #define SEQUENCE_2_SIZE 0x00000d10 #define SEQUENCE_3_START_ADDR 0x00047000 #define SEQUENCE_3_SIZE 0x00000d10 #define SEQUENCE_4_START_ADDR 0x00048000 #define SEQUENCE_4_SIZE 0x00000d10 #define SEQUENCE_5_START_ADDR 0x00049000 #define SEQUENCE_5_SIZE 0x00000d10 #define SEQUENCE_6_START_ADDR 0x0004a000 #define SEQUENCE_6_SIZE 0x00000d10 #define CMT_LUT_0_START_ADDR 0x0004b200 #define CMT_LUT_0_SIZE 0x00000600 #define CMT_LUT_1_START_ADDR 0x0004b800 #define CMT_LUT_1_SIZE 0x00000600 #define CMT_LUT_2_START_ADDR 0x0004be00 #define CMT_LUT_2_SIZE 0x00000600 #define CMT_LUT_3_START_ADDR 0x0004c400 #define CMT_LUT_3_SIZE 0x00000600 #define CMT_LUT_4_START_ADDR 0x0004ca00 #define CMT_LUT_4_SIZE 0x00000600 #define CMT_LUT_5_START_ADDR 0x0004d000 #define CMT_LUT_5_SIZE 0x00000600 #define CMT_LUT_6_START_ADDR 0x0004d600 #define CMT_LUT_6_SIZE 0x00000600 #define DRC_TABLE_0_START_ADDR 0x0004dc00 #define DRC_TABLE_0_SIZE 0x00000100 #define SPLASH_0_START_ADDR 0x0004dd00 #define SPLASH_0_SIZE 0x00032280 #define SEQUENCE_7_START_ADDR 0x00080000 #define SEQUENCE_7_SIZE 0x00000d10 #define SEQUENCE_8_START_ADDR 0x00081800 #define SEQUENCE_8_SIZE 0x00000d10 #define SEQUENCE_9_START_ADDR 0x00083000 #define SEQUENCE_9_SIZE 0x00000d10 #define CMT_LUT_7_START_ADDR 0x0008e000 #define CMT_LUT_7_SIZE 0x00000600 #define CMT_LUT_8_START_ADDR 0x0008e800 #define CMT_LUT_8_SIZE 0x00000600 #define CMT_LUT_9_START_ADDR 0x0008f000 #define CMT_LUT_9_SIZE 0x00000600 #define SPLASH_1_START_ADDR 0x0009a000 #define SPLASH_1_SIZE 0x00032280 #define SPLASH_2_START_ADDR 0x000cd000 #define SPLASH_2_SIZE 0x00032280 #define SPLASH_3_START_ADDR 0x00100000 #define SPLASH_3_SIZE 0x00032280 #define OPT_SPLASH_0_START_ADDR 0x00134000 #define OPT_SPLASH_0_SIZE 0x000cb100 #endif