/* * drivers/media/i2c/tvp514x.c * * TI TVP5146/47 decoder driver * * Copyright (C) 2008 Texas Instruments Inc * Author: Vaibhav Hiremath <hvaibhav@ti.com> * * Contributors: * Sivaraj R <sivaraj@ti.com> * Brijesh R Jadav <brijesh.j@ti.com> * Hardik Shah <hardik.shah@ti.com> * Manjunath Hadli <mrh@ti.com> * Karicheri Muralidharan <m-karicheri2@ti.com> * Prabhakar Lad <prabhakar.lad@ti.com> * * This package is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. * */ #include <linux/i2c.h> #include <linux/slab.h> #include <linux/delay.h> #include <linux/videodev2.h> #include <linux/module.h> #include <linux/v4l2-mediabus.h> #include <media/v4l2-device.h> #include <media/v4l2-common.h> #include <media/v4l2-mediabus.h> #include <media/v4l2-chip-ident.h> #include <media/v4l2-ctrls.h> #include <media/tvp514x.h> #include <media/media-entity.h> #include "tvp514x_regs.h" /* Private macros for TVP */ #define I2C_RETRY_COUNT (5) #define LOCK_RETRY_COUNT (5) #define LOCK_RETRY_DELAY (200) /* Debug functions */ static bool debug; module_param(debug, bool, 0644); MODULE_PARM_DESC(debug, "Debug level (0-1)"); MODULE_AUTHOR("Texas Instruments"); MODULE_DESCRIPTION("TVP514X linux decoder driver"); MODULE_LICENSE("GPL"); /* enum tvp514x_std - enum for supported standards */ enum tvp514x_std { STD_NTSC_MJ = 0, STD_PAL_BDGHIN, STD_INVALID }; /** * struct tvp514x_std_info - Structure to store standard informations * @width: Line width in pixels * @height:Number of active lines * @video_std: Value to write in REG_VIDEO_STD register * @standard: v4l2 standard structure information */ struct tvp514x_std_info { unsigned long width; unsigned long height; u8 video_std; struct v4l2_standard standard; }; static struct tvp514x_reg tvp514x_reg_list_default[0x40]; static int tvp514x_s_stream(struct v4l2_subdev *sd, int enable); /** * struct tvp514x_decoder - TVP5146/47 decoder object * @sd: Subdevice Slave handle * @tvp514x_regs: copy of hw's regs with preset values. * @pdata: Board specific * @ver: Chip version * @streaming: TVP5146/47 decoder streaming - enabled or disabled. * @pix: Current pixel format * @num_fmts: Number of formats * @fmt_list: Format list * @current_std: Current standard * @num_stds: Number of standards * @std_list: Standards list * @input: Input routing at chip level * @output: Output routing at chip level */ struct tvp514x_decoder { struct v4l2_subdev sd; struct v4l2_ctrl_handler hdl; struct tvp514x_reg tvp514x_regs[ARRAY_SIZE(tvp514x_reg_list_default)]; const struct tvp514x_platform_data *pdata; int ver; int streaming; struct v4l2_pix_format pix; int num_fmts; const struct v4l2_fmtdesc *fmt_list; enum tvp514x_std current_std; int num_stds; const struct tvp514x_std_info *std_list; /* Input and Output Routing parameters */ u32 input; u32 output; /* mc related members */ struct media_pad pad; struct v4l2_mbus_framefmt format; }; /* TVP514x default register values */ static struct tvp514x_reg tvp514x_reg_list_default[] = { /* Composite selected */ {TOK_WRITE, REG_INPUT_SEL, 0x05}, {TOK_WRITE, REG_AFE_GAIN_CTRL, 0x0F}, /* Auto mode */ {TOK_WRITE, REG_VIDEO_STD, 0x00}, {TOK_WRITE, REG_OPERATION_MODE, 0x00}, {TOK_SKIP, REG_AUTOSWITCH_MASK, 0x3F}, {TOK_WRITE, REG_COLOR_KILLER, 0x10}, {TOK_WRITE, REG_LUMA_CONTROL1, 0x00}, {TOK_WRITE, REG_LUMA_CONTROL2, 0x00}, {TOK_WRITE, REG_LUMA_CONTROL3, 0x02}, {TOK_WRITE, REG_BRIGHTNESS, 0x80}, {TOK_WRITE, REG_CONTRAST, 0x80}, {TOK_WRITE, REG_SATURATION, 0x80}, {TOK_WRITE, REG_HUE, 0x00}, {TOK_WRITE, REG_CHROMA_CONTROL1, 0x00}, {TOK_WRITE, REG_CHROMA_CONTROL2, 0x0E}, /* Reserved */ {TOK_SKIP, 0x0F, 0x00}, {TOK_WRITE, REG_COMP_PR_SATURATION, 0x80}, {TOK_WRITE, REG_COMP_Y_CONTRAST, 0x80}, {TOK_WRITE, REG_COMP_PB_SATURATION, 0x80}, /* Reserved */ {TOK_SKIP, 0x13, 0x00}, {TOK_WRITE, REG_COMP_Y_BRIGHTNESS, 0x80}, /* Reserved */ {TOK_SKIP, 0x15, 0x00}, /* NTSC timing */ {TOK_SKIP, REG_AVID_START_PIXEL_LSB, 0x55}, {TOK_SKIP, REG_AVID_START_PIXEL_MSB, 0x00}, {TOK_SKIP, REG_AVID_STOP_PIXEL_LSB, 0x25}, {TOK_SKIP, REG_AVID_STOP_PIXEL_MSB, 0x03}, /* NTSC timing */ {TOK_SKIP, REG_HSYNC_START_PIXEL_LSB, 0x00}, {TOK_SKIP, REG_HSYNC_START_PIXEL_MSB, 0x00}, {TOK_SKIP, REG_HSYNC_STOP_PIXEL_LSB, 0x40}, {TOK_SKIP, REG_HSYNC_STOP_PIXEL_MSB, 0x00}, /* NTSC timing */ {TOK_SKIP, REG_VSYNC_START_LINE_LSB, 0x04}, {TOK_SKIP, REG_VSYNC_START_LINE_MSB, 0x00}, {TOK_SKIP, REG_VSYNC_STOP_LINE_LSB, 0x07}, {TOK_SKIP, REG_VSYNC_STOP_LINE_MSB, 0x00}, /* NTSC timing */ {TOK_SKIP, REG_VBLK_START_LINE_LSB, 0x01}, {TOK_SKIP, REG_VBLK_START_LINE_MSB, 0x00}, {TOK_SKIP, REG_VBLK_STOP_LINE_LSB, 0x15}, {TOK_SKIP, REG_VBLK_STOP_LINE_MSB, 0x00}, /* Reserved */ {TOK_SKIP, 0x26, 0x00}, /* Reserved */ {TOK_SKIP, 0x27, 0x00}, {TOK_SKIP, REG_FAST_SWTICH_CONTROL, 0xCC}, /* Reserved */ {TOK_SKIP, 0x29, 0x00}, {TOK_SKIP, REG_FAST_SWTICH_SCART_DELAY, 0x00}, /* Reserved */ {TOK_SKIP, 0x2B, 0x00}, {TOK_SKIP, REG_SCART_DELAY, 0x00}, {TOK_SKIP, REG_CTI_DELAY, 0x00}, {TOK_SKIP, REG_CTI_CONTROL, 0x00}, /* Reserved */ {TOK_SKIP, 0x2F, 0x00}, /* Reserved */ {TOK_SKIP, 0x30, 0x00}, /* Reserved */ {TOK_SKIP, 0x31, 0x00}, /* HS, VS active high */ {TOK_WRITE, REG_SYNC_CONTROL, 0x00}, /* 10-bit BT.656 */ {TOK_WRITE, REG_OUTPUT_FORMATTER1, 0x00}, /* Enable clk & data */ {TOK_WRITE, REG_OUTPUT_FORMATTER2, 0x11}, /* Enable AVID & FLD */ {TOK_WRITE, REG_OUTPUT_FORMATTER3, 0xEE}, /* Enable VS & HS */ {TOK_WRITE, REG_OUTPUT_FORMATTER4, 0xAF}, {TOK_WRITE, REG_OUTPUT_FORMATTER5, 0xFF}, {TOK_WRITE, REG_OUTPUT_FORMATTER6, 0xFF}, /* Clear status */ {TOK_WRITE, REG_CLEAR_LOST_LOCK, 0x01}, {TOK_TERM, 0, 0}, }; /** * List of image formats supported by TVP5146/47 decoder * Currently we are using 8 bit mode only, but can be * extended to 10/20 bit mode. */ static const struct v4l2_fmtdesc tvp514x_fmt_list[] = { { .index = 0, .type = V4L2_BUF_TYPE_VIDEO_CAPTURE, .flags = 0, .description = "8-bit UYVY 4:2:2 Format", .pixelformat = V4L2_PIX_FMT_UYVY, }, }; /** * Supported standards - * * Currently supports two standards only, need to add support for rest of the * modes, like SECAM, etc... */ static const struct tvp514x_std_info tvp514x_std_list[] = { /* Standard: STD_NTSC_MJ */ [STD_NTSC_MJ] = { .width = NTSC_NUM_ACTIVE_PIXELS, .height = NTSC_NUM_ACTIVE_LINES, .video_std = VIDEO_STD_NTSC_MJ_BIT, .standard = { .index = 0, .id = V4L2_STD_NTSC, .name = "NTSC", .frameperiod = {1001, 30000}, .framelines = 525 }, /* Standard: STD_PAL_BDGHIN */ }, [STD_PAL_BDGHIN] = { .width = PAL_NUM_ACTIVE_PIXELS, .height = PAL_NUM_ACTIVE_LINES, .video_std = VIDEO_STD_PAL_BDGHIN_BIT, .standard = { .index = 1, .id = V4L2_STD_PAL, .name = "PAL", .frameperiod = {1, 25}, .framelines = 625 }, }, /* Standard: need to add for additional standard */ }; static inline struct tvp514x_decoder *to_decoder(struct v4l2_subdev *sd) { return container_of(sd, struct tvp514x_decoder, sd); } static inline struct v4l2_subdev *to_sd(struct v4l2_ctrl *ctrl) { return &container_of(ctrl->handler, struct tvp514x_decoder, hdl)->sd; } /** * tvp514x_read_reg() - Read a value from a register in an TVP5146/47. * @sd: ptr to v4l2_subdev struct * @reg: TVP5146/47 register address * * Returns value read if successful, or non-zero (-1) otherwise. */ static int tvp514x_read_reg(struct v4l2_subdev *sd, u8 reg) { int err, retry = 0; struct i2c_client *client = v4l2_get_subdevdata(sd); read_again: err = i2c_smbus_read_byte_data(client, reg); if (err < 0) { if (retry <= I2C_RETRY_COUNT) { v4l2_warn(sd, "Read: retry ... %d\n", retry); retry++; msleep_interruptible(10); goto read_again; } } return err; } /** * dump_reg() - dump the register content of TVP5146/47. * @sd: ptr to v4l2_subdev struct * @reg: TVP5146/47 register address */ static void dump_reg(struct v4l2_subdev *sd, u8 reg) { u32 val; val = tvp514x_read_reg(sd, reg); v4l2_info(sd, "Reg(0x%.2X): 0x%.2X\n", reg, val); } /** * tvp514x_write_reg() - Write a value to a register in TVP5146/47 * @sd: ptr to v4l2_subdev struct * @reg: TVP5146/47 register address * @val: value to be written to the register * * Write a value to a register in an TVP5146/47 decoder device. * Returns zero if successful, or non-zero otherwise. */ static int tvp514x_write_reg(struct v4l2_subdev *sd, u8 reg, u8 val) { int err, retry = 0; struct i2c_client *client = v4l2_get_subdevdata(sd); write_again: err = i2c_smbus_write_byte_data(client, reg, val); if (err) { if (retry <= I2C_RETRY_COUNT) { v4l2_warn(sd, "Write: retry ... %d\n", retry); retry++; msleep_interruptible(10); goto write_again; } } return err; } /** * tvp514x_write_regs() : Initializes a list of TVP5146/47 registers * @sd: ptr to v4l2_subdev struct * @reglist: list of TVP5146/47 registers and values * * Initializes a list of TVP5146/47 registers:- * if token is TOK_TERM, then entire write operation terminates * if token is TOK_DELAY, then a delay of 'val' msec is introduced * if token is TOK_SKIP, then the register write is skipped * if token is TOK_WRITE, then the register write is performed * Returns zero if successful, or non-zero otherwise. */ static int tvp514x_write_regs(struct v4l2_subdev *sd, const struct tvp514x_reg reglist[]) { int err; const struct tvp514x_reg *next = reglist; for (; next->token != TOK_TERM; next++) { if (next->token == TOK_DELAY) { msleep(next->val); continue; } if (next->token == TOK_SKIP) continue; err = tvp514x_write_reg(sd, next->reg, (u8) next->val); if (err) { v4l2_err(sd, "Write failed. Err[%d]\n", err); return err; } } return 0; } /** * tvp514x_query_current_std() : Query the current standard detected by TVP5146/47 * @sd: ptr to v4l2_subdev struct * * Returns the current standard detected by TVP5146/47, STD_INVALID if there is no * standard detected. */ static enum tvp514x_std tvp514x_query_current_std(struct v4l2_subdev *sd) { u8 std, std_status; std = tvp514x_read_reg(sd, REG_VIDEO_STD); if ((std & VIDEO_STD_MASK) == VIDEO_STD_AUTO_SWITCH_BIT) /* use the standard status register */ std_status = tvp514x_read_reg(sd, REG_VIDEO_STD_STATUS); else /* use the standard register itself */ std_status = std; switch (std_status & VIDEO_STD_MASK) { case VIDEO_STD_NTSC_MJ_BIT: return STD_NTSC_MJ; case VIDEO_STD_PAL_BDGHIN_BIT: return STD_PAL_BDGHIN; default: return STD_INVALID; } return STD_INVALID; } /* TVP5146/47 register dump function */ static void tvp514x_reg_dump(struct v4l2_subdev *sd) { dump_reg(sd, REG_INPUT_SEL); dump_reg(sd, REG_AFE_GAIN_CTRL); dump_reg(sd, REG_VIDEO_STD); dump_reg(sd, REG_OPERATION_MODE); dump_reg(sd, REG_COLOR_KILLER); dump_reg(sd, REG_LUMA_CONTROL1); dump_reg(sd, REG_LUMA_CONTROL2); dump_reg(sd, REG_LUMA_CONTROL3); dump_reg(sd, REG_BRIGHTNESS); dump_reg(sd, REG_CONTRAST); dump_reg(sd, REG_SATURATION); dump_reg(sd, REG_HUE); dump_reg(sd, REG_CHROMA_CONTROL1); dump_reg(sd, REG_CHROMA_CONTROL2); dump_reg(sd, REG_COMP_PR_SATURATION); dump_reg(sd, REG_COMP_Y_CONTRAST); dump_reg(sd, REG_COMP_PB_SATURATION); dump_reg(sd, REG_COMP_Y_BRIGHTNESS); dump_reg(sd, REG_AVID_START_PIXEL_LSB); dump_reg(sd, REG_AVID_START_PIXEL_MSB); dump_reg(sd, REG_AVID_STOP_PIXEL_LSB); dump_reg(sd, REG_AVID_STOP_PIXEL_MSB); dump_reg(sd, REG_HSYNC_START_PIXEL_LSB); dump_reg(sd, REG_HSYNC_START_PIXEL_MSB); dump_reg(sd, REG_HSYNC_STOP_PIXEL_LSB); dump_reg(sd, REG_HSYNC_STOP_PIXEL_MSB); dump_reg(sd, REG_VSYNC_START_LINE_LSB); dump_reg(sd, REG_VSYNC_START_LINE_MSB); dump_reg(sd, REG_VSYNC_STOP_LINE_LSB); dump_reg(sd, REG_VSYNC_STOP_LINE_MSB); dump_reg(sd, REG_VBLK_START_LINE_LSB); dump_reg(sd, REG_VBLK_START_LINE_MSB); dump_reg(sd, REG_VBLK_STOP_LINE_LSB); dump_reg(sd, REG_VBLK_STOP_LINE_MSB); dump_reg(sd, REG_SYNC_CONTROL); dump_reg(sd, REG_OUTPUT_FORMATTER1); dump_reg(sd, REG_OUTPUT_FORMATTER2); dump_reg(sd, REG_OUTPUT_FORMATTER3); dump_reg(sd, REG_OUTPUT_FORMATTER4); dump_reg(sd, REG_OUTPUT_FORMATTER5); dump_reg(sd, REG_OUTPUT_FORMATTER6); dump_reg(sd, REG_CLEAR_LOST_LOCK); } /** * tvp514x_configure() - Configure the TVP5146/47 registers * @sd: ptr to v4l2_subdev struct * @decoder: ptr to tvp514x_decoder structure * * Returns zero if successful, or non-zero otherwise. */ static int tvp514x_configure(struct v4l2_subdev *sd, struct tvp514x_decoder *decoder) { int err; /* common register initialization */ err = tvp514x_write_regs(sd, decoder->tvp514x_regs); if (err) return err; if (debug) tvp514x_reg_dump(sd); return 0; } /** * tvp514x_detect() - Detect if an tvp514x is present, and if so which revision. * @sd: pointer to standard V4L2 sub-device structure * @decoder: pointer to tvp514x_decoder structure * * A device is considered to be detected if the chip ID (LSB and MSB) * registers match the expected values. * Any value of the rom version register is accepted. * Returns ENODEV error number if no device is detected, or zero * if a device is detected. */ static int tvp514x_detect(struct v4l2_subdev *sd, struct tvp514x_decoder *decoder) { u8 chip_id_msb, chip_id_lsb, rom_ver; struct i2c_client *client = v4l2_get_subdevdata(sd); chip_id_msb = tvp514x_read_reg(sd, REG_CHIP_ID_MSB); chip_id_lsb = tvp514x_read_reg(sd, REG_CHIP_ID_LSB); rom_ver = tvp514x_read_reg(sd, REG_ROM_VERSION); v4l2_dbg(1, debug, sd, "chip id detected msb:0x%x lsb:0x%x rom version:0x%x\n", chip_id_msb, chip_id_lsb, rom_ver); if ((chip_id_msb != TVP514X_CHIP_ID_MSB) || ((chip_id_lsb != TVP5146_CHIP_ID_LSB) && (chip_id_lsb != TVP5147_CHIP_ID_LSB))) { /* We didn't read the values we expected, so this must not be * an TVP5146/47. */ v4l2_err(sd, "chip id mismatch msb:0x%x lsb:0x%x\n", chip_id_msb, chip_id_lsb); return -ENODEV; } decoder->ver = rom_ver; v4l2_info(sd, "%s (Version - 0x%.2x) found at 0x%x (%s)\n", client->name, decoder->ver, client->addr << 1, client->adapter->name); return 0; } /** * tvp514x_querystd() - V4L2 decoder interface handler for querystd * @sd: pointer to standard V4L2 sub-device structure * @std_id: standard V4L2 std_id ioctl enum * * Returns the current standard detected by TVP5146/47. If no active input is * detected then *std_id is set to 0 and the function returns 0. */ static int tvp514x_querystd(struct v4l2_subdev *sd, v4l2_std_id *std_id) { struct tvp514x_decoder *decoder = to_decoder(sd); enum tvp514x_std current_std; enum tvp514x_input input_sel; u8 sync_lock_status, lock_mask; if (std_id == NULL) return -EINVAL; *std_id = V4L2_STD_UNKNOWN; /* To query the standard the TVP514x must power on the ADCs. */ if (!decoder->streaming) { tvp514x_s_stream(sd, 1); msleep(LOCK_RETRY_DELAY); } /* query the current standard */ current_std = tvp514x_query_current_std(sd); if (current_std == STD_INVALID) return 0; input_sel = decoder->input; switch (input_sel) { case INPUT_CVBS_VI1A: case INPUT_CVBS_VI1B: case INPUT_CVBS_VI1C: case INPUT_CVBS_VI2A: case INPUT_CVBS_VI2B: case INPUT_CVBS_VI2C: case INPUT_CVBS_VI3A: case INPUT_CVBS_VI3B: case INPUT_CVBS_VI3C: case INPUT_CVBS_VI4A: lock_mask = STATUS_CLR_SUBCAR_LOCK_BIT | STATUS_HORZ_SYNC_LOCK_BIT | STATUS_VIRT_SYNC_LOCK_BIT; break; case INPUT_SVIDEO_VI2A_VI1A: case INPUT_SVIDEO_VI2B_VI1B: case INPUT_SVIDEO_VI2C_VI1C: case INPUT_SVIDEO_VI2A_VI3A: case INPUT_SVIDEO_VI2B_VI3B: case INPUT_SVIDEO_VI2C_VI3C: case INPUT_SVIDEO_VI4A_VI1A: case INPUT_SVIDEO_VI4A_VI1B: case INPUT_SVIDEO_VI4A_VI1C: case INPUT_SVIDEO_VI4A_VI3A: case INPUT_SVIDEO_VI4A_VI3B: case INPUT_SVIDEO_VI4A_VI3C: lock_mask = STATUS_HORZ_SYNC_LOCK_BIT | STATUS_VIRT_SYNC_LOCK_BIT; break; /*Need to add other interfaces*/ default: return -EINVAL; } /* check whether signal is locked */ sync_lock_status = tvp514x_read_reg(sd, REG_STATUS1); if (lock_mask != (sync_lock_status & lock_mask)) return 0; /* No input detected */ *std_id = decoder->std_list[current_std].standard.id; v4l2_dbg(1, debug, sd, "Current STD: %s\n", decoder->std_list[current_std].standard.name); return 0; } /** * tvp514x_s_std() - V4L2 decoder interface handler for s_std * @sd: pointer to standard V4L2 sub-device structure * @std_id: standard V4L2 v4l2_std_id ioctl enum * * If std_id is supported, sets the requested standard. Otherwise, returns * -EINVAL */ static int tvp514x_s_std(struct v4l2_subdev *sd, v4l2_std_id std_id) { struct tvp514x_decoder *decoder = to_decoder(sd); int err, i; for (i = 0; i < decoder->num_stds; i++) if (std_id & decoder->std_list[i].standard.id) break; if ((i == decoder->num_stds) || (i == STD_INVALID)) return -EINVAL; err = tvp514x_write_reg(sd, REG_VIDEO_STD, decoder->std_list[i].video_std); if (err) return err; decoder->current_std = i; decoder->tvp514x_regs[REG_VIDEO_STD].val = decoder->std_list[i].video_std; v4l2_dbg(1, debug, sd, "Standard set to: %s\n", decoder->std_list[i].standard.name); return 0; } /** * tvp514x_s_routing() - V4L2 decoder interface handler for s_routing * @sd: pointer to standard V4L2 sub-device structure * @input: input selector for routing the signal * @output: output selector for routing the signal * @config: config value. Not used * * If index is valid, selects the requested input. Otherwise, returns -EINVAL if * the input is not supported or there is no active signal present in the * selected input. */ static int tvp514x_s_routing(struct v4l2_subdev *sd, u32 input, u32 output, u32 config) { struct tvp514x_decoder *decoder = to_decoder(sd); int err; enum tvp514x_input input_sel; enum tvp514x_output output_sel; if ((input >= INPUT_INVALID) || (output >= OUTPUT_INVALID)) /* Index out of bound */ return -EINVAL; input_sel = input; output_sel = output; err = tvp514x_write_reg(sd, REG_INPUT_SEL, input_sel); if (err) return err; output_sel |= tvp514x_read_reg(sd, REG_OUTPUT_FORMATTER1) & 0x7; err = tvp514x_write_reg(sd, REG_OUTPUT_FORMATTER1, output_sel); if (err) return err; decoder->tvp514x_regs[REG_INPUT_SEL].val = input_sel; decoder->tvp514x_regs[REG_OUTPUT_FORMATTER1].val = output_sel; decoder->input = input; decoder->output = output; v4l2_dbg(1, debug, sd, "Input set to: %d\n", input_sel); return 0; } /** * tvp514x_s_ctrl() - V4L2 decoder interface handler for s_ctrl * @ctrl: pointer to v4l2_ctrl structure * * If the requested control is supported, sets the control's current * value in HW. Otherwise, returns -EINVAL if the control is not supported. */ static int tvp514x_s_ctrl(struct v4l2_ctrl *ctrl) { struct v4l2_subdev *sd = to_sd(ctrl); struct tvp514x_decoder *decoder = to_decoder(sd); int err = -EINVAL, value; value = ctrl->val; switch (ctrl->id) { case V4L2_CID_BRIGHTNESS: err = tvp514x_write_reg(sd, REG_BRIGHTNESS, value); if (!err) decoder->tvp514x_regs[REG_BRIGHTNESS].val = value; break; case V4L2_CID_CONTRAST: err = tvp514x_write_reg(sd, REG_CONTRAST, value); if (!err) decoder->tvp514x_regs[REG_CONTRAST].val = value; break; case V4L2_CID_SATURATION: err = tvp514x_write_reg(sd, REG_SATURATION, value); if (!err) decoder->tvp514x_regs[REG_SATURATION].val = value; break; case V4L2_CID_HUE: if (value == 180) value = 0x7F; else if (value == -180) value = 0x80; err = tvp514x_write_reg(sd, REG_HUE, value); if (!err) decoder->tvp514x_regs[REG_HUE].val = value; break; case V4L2_CID_AUTOGAIN: err = tvp514x_write_reg(sd, REG_AFE_GAIN_CTRL, value ? 0x0f : 0x0c); if (!err) decoder->tvp514x_regs[REG_AFE_GAIN_CTRL].val = value; break; } v4l2_dbg(1, debug, sd, "Set Control: ID - %d - %d\n", ctrl->id, ctrl->val); return err; } /** * tvp514x_enum_mbus_fmt() - V4L2 decoder interface handler for enum_mbus_fmt * @sd: pointer to standard V4L2 sub-device structure * @index: index of pixelcode to retrieve * @code: receives the pixelcode * * Enumerates supported mediabus formats */ static int tvp514x_enum_mbus_fmt(struct v4l2_subdev *sd, unsigned index, enum v4l2_mbus_pixelcode *code) { if (index) return -EINVAL; *code = V4L2_MBUS_FMT_YUYV10_2X10; return 0; } /** * tvp514x_mbus_fmt() - V4L2 decoder interface handler for try/s/g_mbus_fmt * @sd: pointer to standard V4L2 sub-device structure * @f: pointer to the mediabus format structure * * Negotiates the image capture size and mediabus format. */ static int tvp514x_mbus_fmt(struct v4l2_subdev *sd, struct v4l2_mbus_framefmt *f) { struct tvp514x_decoder *decoder = to_decoder(sd); enum tvp514x_std current_std; if (f == NULL) return -EINVAL; /* Calculate height and width based on current standard */ current_std = decoder->current_std; f->code = V4L2_MBUS_FMT_YUYV8_2X8; f->width = decoder->std_list[current_std].width; f->height = decoder->std_list[current_std].height; f->field = V4L2_FIELD_INTERLACED; f->colorspace = V4L2_COLORSPACE_SMPTE170M; v4l2_dbg(1, debug, sd, "MBUS_FMT: Width - %d, Height - %d\n", f->width, f->height); return 0; } /** * tvp514x_g_parm() - V4L2 decoder interface handler for g_parm * @sd: pointer to standard V4L2 sub-device structure * @a: pointer to standard V4L2 VIDIOC_G_PARM ioctl structure * * Returns the decoder's video CAPTURE parameters. */ static int tvp514x_g_parm(struct v4l2_subdev *sd, struct v4l2_streamparm *a) { struct tvp514x_decoder *decoder = to_decoder(sd); struct v4l2_captureparm *cparm; enum tvp514x_std current_std; if (a == NULL) return -EINVAL; if (a->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) /* only capture is supported */ return -EINVAL; /* get the current standard */ current_std = decoder->current_std; cparm = &a->parm.capture; cparm->capability = V4L2_CAP_TIMEPERFRAME; cparm->timeperframe = decoder->std_list[current_std].standard.frameperiod; return 0; } /** * tvp514x_s_parm() - V4L2 decoder interface handler for s_parm * @sd: pointer to standard V4L2 sub-device structure * @a: pointer to standard V4L2 VIDIOC_S_PARM ioctl structure * * Configures the decoder to use the input parameters, if possible. If * not possible, returns the appropriate error code. */ static int tvp514x_s_parm(struct v4l2_subdev *sd, struct v4l2_streamparm *a) { struct tvp514x_decoder *decoder = to_decoder(sd); struct v4l2_fract *timeperframe; enum tvp514x_std current_std; if (a == NULL) return -EINVAL; if (a->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) /* only capture is supported */ return -EINVAL; timeperframe = &a->parm.capture.timeperframe; /* get the current standard */ current_std = decoder->current_std; *timeperframe = decoder->std_list[current_std].standard.frameperiod; return 0; } /** * tvp514x_s_stream() - V4L2 decoder i/f handler for s_stream * @sd: pointer to standard V4L2 sub-device structure * @enable: streaming enable or disable * * Sets streaming to enable or disable, if possible. */ static int tvp514x_s_stream(struct v4l2_subdev *sd, int enable) { int err = 0; struct i2c_client *client = v4l2_get_subdevdata(sd); struct tvp514x_decoder *decoder = to_decoder(sd); if (decoder->streaming == enable) return 0; switch (enable) { case 0: { /* Power Down Sequence */ err = tvp514x_write_reg(sd, REG_OPERATION_MODE, 0x01); if (err) { v4l2_err(sd, "Unable to turn off decoder\n"); return err; } decoder->streaming = enable; break; } case 1: { struct tvp514x_reg *int_seq = (struct tvp514x_reg *) client->driver->id_table->driver_data; /* Power Up Sequence */ err = tvp514x_write_regs(sd, int_seq); if (err) { v4l2_err(sd, "Unable to turn on decoder\n"); return err; } /* Detect if not already detected */ err = tvp514x_detect(sd, decoder); if (err) { v4l2_err(sd, "Unable to detect decoder\n"); return err; } err = tvp514x_configure(sd, decoder); if (err) { v4l2_err(sd, "Unable to configure decoder\n"); return err; } decoder->streaming = enable; break; } default: err = -ENODEV; break; } return err; } static const struct v4l2_ctrl_ops tvp514x_ctrl_ops = { .s_ctrl = tvp514x_s_ctrl, }; /** * tvp514x_enum_mbus_code() - V4L2 decoder interface handler for enum_mbus_code * @sd: pointer to standard V4L2 sub-device structure * @fh: file handle * @code: pointer to v4l2_subdev_mbus_code_enum structure * * Enumertaes mbus codes supported */ static int tvp514x_enum_mbus_code(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh, struct v4l2_subdev_mbus_code_enum *code) { u32 pad = code->pad; u32 index = code->index; memset(code, 0, sizeof(*code)); code->index = index; code->pad = pad; if (index != 0) return -EINVAL; code->code = V4L2_MBUS_FMT_YUYV8_2X8; return 0; } /** * tvp514x_get_pad_format() - V4L2 decoder interface handler for get pad format * @sd: pointer to standard V4L2 sub-device structure * @fh: file handle * @format: pointer to v4l2_subdev_format structure * * Retrieves pad format which is active or tried based on requirement */ static int tvp514x_get_pad_format(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh, struct v4l2_subdev_format *format) { struct tvp514x_decoder *decoder = to_decoder(sd); __u32 which = format->which; if (which == V4L2_SUBDEV_FORMAT_ACTIVE) { format->format = decoder->format; return 0; } format->format.code = V4L2_MBUS_FMT_YUYV8_2X8; format->format.width = tvp514x_std_list[decoder->current_std].width; format->format.height = tvp514x_std_list[decoder->current_std].height; format->format.colorspace = V4L2_COLORSPACE_SMPTE170M; format->format.field = V4L2_FIELD_INTERLACED; return 0; } /** * tvp514x_set_pad_format() - V4L2 decoder interface handler for set pad format * @sd: pointer to standard V4L2 sub-device structure * @fh: file handle * @format: pointer to v4l2_subdev_format structure * * Set pad format for the output pad */ static int tvp514x_set_pad_format(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh, struct v4l2_subdev_format *fmt) { struct tvp514x_decoder *decoder = to_decoder(sd); if (fmt->format.field != V4L2_FIELD_INTERLACED || fmt->format.code != V4L2_MBUS_FMT_YUYV8_2X8 || fmt->format.colorspace != V4L2_COLORSPACE_SMPTE170M || fmt->format.width != tvp514x_std_list[decoder->current_std].width || fmt->format.height != tvp514x_std_list[decoder->current_std].height) return -EINVAL; decoder->format = fmt->format; return 0; } static const struct v4l2_subdev_core_ops tvp514x_core_ops = { .g_ext_ctrls = v4l2_subdev_g_ext_ctrls, .try_ext_ctrls = v4l2_subdev_try_ext_ctrls, .s_ext_ctrls = v4l2_subdev_s_ext_ctrls, .g_ctrl = v4l2_subdev_g_ctrl, .s_ctrl = v4l2_subdev_s_ctrl, .queryctrl = v4l2_subdev_queryctrl, .querymenu = v4l2_subdev_querymenu, .s_std = tvp514x_s_std, }; static const struct v4l2_subdev_video_ops tvp514x_video_ops = { .s_routing = tvp514x_s_routing, .querystd = tvp514x_querystd, .enum_mbus_fmt = tvp514x_enum_mbus_fmt, .g_mbus_fmt = tvp514x_mbus_fmt, .try_mbus_fmt = tvp514x_mbus_fmt, .s_mbus_fmt = tvp514x_mbus_fmt, .g_parm = tvp514x_g_parm, .s_parm = tvp514x_s_parm, .s_stream = tvp514x_s_stream, }; static const struct v4l2_subdev_pad_ops tvp514x_pad_ops = { .enum_mbus_code = tvp514x_enum_mbus_code, .get_fmt = tvp514x_get_pad_format, .set_fmt = tvp514x_set_pad_format, }; static const struct v4l2_subdev_ops tvp514x_ops = { .core = &tvp514x_core_ops, .video = &tvp514x_video_ops, .pad = &tvp514x_pad_ops, }; static struct tvp514x_decoder tvp514x_dev = { .streaming = 0, .fmt_list = tvp514x_fmt_list, .num_fmts = ARRAY_SIZE(tvp514x_fmt_list), .pix = { /* Default to NTSC 8-bit YUV 422 */ .width = NTSC_NUM_ACTIVE_PIXELS, .height = NTSC_NUM_ACTIVE_LINES, .pixelformat = V4L2_PIX_FMT_UYVY, .field = V4L2_FIELD_INTERLACED, .bytesperline = NTSC_NUM_ACTIVE_PIXELS * 2, .sizeimage = NTSC_NUM_ACTIVE_PIXELS * 2 * NTSC_NUM_ACTIVE_LINES, .colorspace = V4L2_COLORSPACE_SMPTE170M, }, .current_std = STD_NTSC_MJ, .std_list = tvp514x_std_list, .num_stds = ARRAY_SIZE(tvp514x_std_list), }; /** * tvp514x_probe() - decoder driver i2c probe handler * @client: i2c driver client device structure * @id: i2c driver id table * * Register decoder as an i2c client device and V4L2 * device. */ static int tvp514x_probe(struct i2c_client *client, const struct i2c_device_id *id) { struct tvp514x_decoder *decoder; struct v4l2_subdev *sd; int ret; /* Check if the adapter supports the needed features */ if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA)) return -EIO; if (!client->dev.platform_data) { v4l2_err(client, "No platform data!!\n"); return -ENODEV; } decoder = devm_kzalloc(&client->dev, sizeof(*decoder), GFP_KERNEL); if (!decoder) return -ENOMEM; /* Initialize the tvp514x_decoder with default configuration */ *decoder = tvp514x_dev; /* Copy default register configuration */ memcpy(decoder->tvp514x_regs, tvp514x_reg_list_default, sizeof(tvp514x_reg_list_default)); /* Copy board specific information here */ decoder->pdata = client->dev.platform_data; /** * Fetch platform specific data, and configure the * tvp514x_reg_list[] accordingly. Since this is one * time configuration, no need to preserve. */ decoder->tvp514x_regs[REG_OUTPUT_FORMATTER2].val |= (decoder->pdata->clk_polarity << 1); decoder->tvp514x_regs[REG_SYNC_CONTROL].val |= ((decoder->pdata->hs_polarity << 2) | (decoder->pdata->vs_polarity << 3)); /* Set default standard to auto */ decoder->tvp514x_regs[REG_VIDEO_STD].val = VIDEO_STD_AUTO_SWITCH_BIT; /* Register with V4L2 layer as slave device */ sd = &decoder->sd; v4l2_i2c_subdev_init(sd, client, &tvp514x_ops); strlcpy(sd->name, TVP514X_MODULE_NAME, sizeof(sd->name)); #if defined(CONFIG_MEDIA_CONTROLLER) decoder->pad.flags = MEDIA_PAD_FL_SOURCE; decoder->sd.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE; decoder->sd.entity.flags |= MEDIA_ENT_T_V4L2_SUBDEV_DECODER; ret = media_entity_init(&decoder->sd.entity, 1, &decoder->pad, 0); if (ret < 0) { v4l2_err(sd, "%s decoder driver failed to register !!\n", sd->name); kfree(decoder); return ret; } #endif v4l2_ctrl_handler_init(&decoder->hdl, 5); v4l2_ctrl_new_std(&decoder->hdl, &tvp514x_ctrl_ops, V4L2_CID_BRIGHTNESS, 0, 255, 1, 128); v4l2_ctrl_new_std(&decoder->hdl, &tvp514x_ctrl_ops, V4L2_CID_CONTRAST, 0, 255, 1, 128); v4l2_ctrl_new_std(&decoder->hdl, &tvp514x_ctrl_ops, V4L2_CID_SATURATION, 0, 255, 1, 128); v4l2_ctrl_new_std(&decoder->hdl, &tvp514x_ctrl_ops, V4L2_CID_HUE, -180, 180, 180, 0); v4l2_ctrl_new_std(&decoder->hdl, &tvp514x_ctrl_ops, V4L2_CID_AUTOGAIN, 0, 1, 1, 1); sd->ctrl_handler = &decoder->hdl; if (decoder->hdl.error) { ret = decoder->hdl.error; v4l2_ctrl_handler_free(&decoder->hdl); return ret; } v4l2_ctrl_handler_setup(&decoder->hdl); v4l2_info(sd, "%s decoder driver registered !!\n", sd->name); return 0; } /** * tvp514x_remove() - decoder driver i2c remove handler * @client: i2c driver client device structure * * Unregister decoder as an i2c client device and V4L2 * device. Complement of tvp514x_probe(). */ static int tvp514x_remove(struct i2c_client *client) { struct v4l2_subdev *sd = i2c_get_clientdata(client); struct tvp514x_decoder *decoder = to_decoder(sd); v4l2_device_unregister_subdev(sd); #if defined(CONFIG_MEDIA_CONTROLLER) media_entity_cleanup(&decoder->sd.entity); #endif v4l2_ctrl_handler_free(&decoder->hdl); return 0; } /* TVP5146 Init/Power on Sequence */ static const struct tvp514x_reg tvp5146_init_reg_seq[] = { {TOK_WRITE, REG_VBUS_ADDRESS_ACCESS1, 0x02}, {TOK_WRITE, REG_VBUS_ADDRESS_ACCESS2, 0x00}, {TOK_WRITE, REG_VBUS_ADDRESS_ACCESS3, 0x80}, {TOK_WRITE, REG_VBUS_DATA_ACCESS_NO_VBUS_ADDR_INCR, 0x01}, {TOK_WRITE, REG_VBUS_ADDRESS_ACCESS1, 0x60}, {TOK_WRITE, REG_VBUS_ADDRESS_ACCESS2, 0x00}, {TOK_WRITE, REG_VBUS_ADDRESS_ACCESS3, 0xB0}, {TOK_WRITE, REG_VBUS_DATA_ACCESS_NO_VBUS_ADDR_INCR, 0x01}, {TOK_WRITE, REG_VBUS_DATA_ACCESS_NO_VBUS_ADDR_INCR, 0x00}, {TOK_WRITE, REG_OPERATION_MODE, 0x01}, {TOK_WRITE, REG_OPERATION_MODE, 0x00}, {TOK_TERM, 0, 0}, }; /* TVP5147 Init/Power on Sequence */ static const struct tvp514x_reg tvp5147_init_reg_seq[] = { {TOK_WRITE, REG_VBUS_ADDRESS_ACCESS1, 0x02}, {TOK_WRITE, REG_VBUS_ADDRESS_ACCESS2, 0x00}, {TOK_WRITE, REG_VBUS_ADDRESS_ACCESS3, 0x80}, {TOK_WRITE, REG_VBUS_DATA_ACCESS_NO_VBUS_ADDR_INCR, 0x01}, {TOK_WRITE, REG_VBUS_ADDRESS_ACCESS1, 0x60}, {TOK_WRITE, REG_VBUS_ADDRESS_ACCESS2, 0x00}, {TOK_WRITE, REG_VBUS_ADDRESS_ACCESS3, 0xB0}, {TOK_WRITE, REG_VBUS_DATA_ACCESS_NO_VBUS_ADDR_INCR, 0x01}, {TOK_WRITE, REG_VBUS_ADDRESS_ACCESS1, 0x16}, {TOK_WRITE, REG_VBUS_ADDRESS_ACCESS2, 0x00}, {TOK_WRITE, REG_VBUS_ADDRESS_ACCESS3, 0xA0}, {TOK_WRITE, REG_VBUS_DATA_ACCESS_NO_VBUS_ADDR_INCR, 0x16}, {TOK_WRITE, REG_VBUS_ADDRESS_ACCESS1, 0x60}, {TOK_WRITE, REG_VBUS_ADDRESS_ACCESS2, 0x00}, {TOK_WRITE, REG_VBUS_ADDRESS_ACCESS3, 0xB0}, {TOK_WRITE, REG_VBUS_DATA_ACCESS_NO_VBUS_ADDR_INCR, 0x00}, {TOK_WRITE, REG_OPERATION_MODE, 0x01}, {TOK_WRITE, REG_OPERATION_MODE, 0x00}, {TOK_TERM, 0, 0}, }; /* TVP5146M2/TVP5147M1 Init/Power on Sequence */ static const struct tvp514x_reg tvp514xm_init_reg_seq[] = { {TOK_WRITE, REG_OPERATION_MODE, 0x01}, {TOK_WRITE, REG_OPERATION_MODE, 0x00}, {TOK_TERM, 0, 0}, }; /** * I2C Device Table - * * name - Name of the actual device/chip. * driver_data - Driver data */ static const struct i2c_device_id tvp514x_id[] = { {"tvp5146", (unsigned long)tvp5146_init_reg_seq}, {"tvp5146m2", (unsigned long)tvp514xm_init_reg_seq}, {"tvp5147", (unsigned long)tvp5147_init_reg_seq}, {"tvp5147m1", (unsigned long)tvp514xm_init_reg_seq}, {}, }; MODULE_DEVICE_TABLE(i2c, tvp514x_id); static struct i2c_driver tvp514x_driver = { .driver = { .owner = THIS_MODULE, .name = TVP514X_MODULE_NAME, }, .probe = tvp514x_probe, .remove = tvp514x_remove, .id_table = tvp514x_id, }; module_i2c_driver(tvp514x_driver);