/* $Id: head.S,v 1.7 2003/09/01 17:58:19 lethal Exp $ * * arch/sh/kernel/head.S * * Copyright (C) 1999, 2000 Niibe Yutaka & Kaz Kojima * Copyright (C) 2010 Matt Fleming * * This file is subject to the terms and conditions of the GNU General Public * License. See the file "COPYING" in the main directory of this archive * for more details. * * Head.S contains the SH exception handlers and startup code. */ #include <linux/init.h> #include <linux/linkage.h> #include <asm/thread_info.h> #include <asm/mmu.h> #include <cpu/mmu_context.h> #ifdef CONFIG_CPU_SH4A #define SYNCO() synco #define PREFI(label, reg) \ mov.l label, reg; \ prefi @reg #else #define SYNCO() #define PREFI(label, reg) #endif .section .empty_zero_page, "aw" ENTRY(empty_zero_page) .long 1 /* MOUNT_ROOT_RDONLY */ .long 0 /* RAMDISK_FLAGS */ .long 0x0200 /* ORIG_ROOT_DEV */ .long 1 /* LOADER_TYPE */ .long 0x00000000 /* INITRD_START */ .long 0x00000000 /* INITRD_SIZE */ #ifdef CONFIG_32BIT .long 0x53453f00 + 32 /* "SE?" = 32 bit */ #else .long 0x53453f00 + 29 /* "SE?" = 29 bit */ #endif 1: .skip PAGE_SIZE - empty_zero_page - 1b __HEAD /* * Condition at the entry of _stext: * * BSC has already been initialized. * INTC may or may not be initialized. * VBR may or may not be initialized. * MMU may or may not be initialized. * Cache may or may not be initialized. * Hardware (including on-chip modules) may or may not be initialized. * */ ENTRY(_stext) ! Initialize Status Register mov.l 1f, r0 ! MD=1, RB=0, BL=0, IMASK=0xF ldc r0, sr ! Initialize global interrupt mask #ifdef CONFIG_CPU_HAS_SR_RB mov #0, r0 ldc r0, r6_bank #endif /* * Prefetch if possible to reduce cache miss penalty. * * We do this early on for SH-4A as a micro-optimization, * as later on we will have speculative execution enabled * and this will become less of an issue. */ PREFI(5f, r0) PREFI(6f, r0) ! mov.l 2f, r0 mov r0, r15 ! Set initial r15 (stack pointer) #ifdef CONFIG_CPU_HAS_SR_RB mov.l 7f, r0 ldc r0, r7_bank ! ... and initial thread_info #endif #ifdef CONFIG_PMB /* * Reconfigure the initial PMB mappings setup by the hardware. * * When we boot in 32-bit MMU mode there are 2 PMB entries already * setup for us. * * Entry VPN PPN V SZ C UB WT * --------------------------------------------------------------- * 0 0x80000000 0x00000000 1 512MB 1 0 1 * 1 0xA0000000 0x00000000 1 512MB 0 0 0 * * But we reprogram them here because we want complete control over * our address space and the initial mappings may not map PAGE_OFFSET * to __MEMORY_START (or even map all of our RAM). * * Once we've setup cached and uncached mappings we clear the rest of the * PMB entries. This clearing also deals with the fact that PMB entries * can persist across reboots. The PMB could have been left in any state * when the reboot occurred, so to be safe we clear all entries and start * with with a clean slate. * * The uncached mapping is constructed using the smallest possible * mapping with a single unbufferable page. Only the kernel text needs to * be covered via the uncached mapping so that certain functions can be * run uncached. * * Drivers and the like that have previously abused the 1:1 identity * mapping are unsupported in 32-bit mode and must specify their caching * preference when page tables are constructed. * * This frees up the P2 space for more nefarious purposes. * * Register utilization is as follows: * * r0 = PMB_DATA data field * r1 = PMB_DATA address field * r2 = PMB_ADDR data field * r3 = PMB_ADDR address field * r4 = PMB_E_SHIFT * r5 = remaining amount of RAM to map * r6 = PMB mapping size we're trying to use * r7 = cached_to_uncached * r8 = scratch register * r9 = scratch register * r10 = number of PMB entries we've setup * r11 = scratch register */ mov.l .LMMUCR, r1 /* Flush the TLB */ mov.l @r1, r0 or #MMUCR_TI, r0 mov.l r0, @r1 mov.l .LMEMORY_SIZE, r5 mov #PMB_E_SHIFT, r0 mov #0x1, r4 shld r0, r4 mov.l .LFIRST_DATA_ENTRY, r0 mov.l .LPMB_DATA, r1 mov.l .LFIRST_ADDR_ENTRY, r2 mov.l .LPMB_ADDR, r3 /* * First we need to walk the PMB and figure out if there are any * existing mappings that match the initial mappings VPN/PPN. * If these have already been established by the bootloader, we * don't bother setting up new entries here, and let the late PMB * initialization take care of things instead. * * Note that we may need to coalesce and merge entries in order * to reclaim more available PMB slots, which is much more than * we want to do at this early stage. */ mov #0, r10 mov #NR_PMB_ENTRIES, r9 mov r1, r7 /* temporary PMB_DATA iter */ .Lvalidate_existing_mappings: mov.l .LPMB_DATA_MASK, r11 mov.l @r7, r8 and r11, r8 cmp/eq r0, r8 /* Check for valid __MEMORY_START mappings */ bt .Lpmb_done add #1, r10 /* Increment the loop counter */ cmp/eq r9, r10 bf/s .Lvalidate_existing_mappings add r4, r7 /* Increment to the next PMB_DATA entry */ /* * If we've fallen through, continue with setting up the initial * mappings. */ mov r5, r7 /* cached_to_uncached */ mov #0, r10 #ifdef CONFIG_UNCACHED_MAPPING /* * Uncached mapping */ mov #(PMB_SZ_16M >> 2), r9 shll2 r9 mov #(PMB_UB >> 8), r8 shll8 r8 or r0, r8 or r9, r8 mov.l r8, @r1 mov r2, r8 add r7, r8 mov.l r8, @r3 add r4, r1 add r4, r3 add #1, r10 #endif /* * Iterate over all of the available sizes from largest to * smallest for constructing the cached mapping. */ #define __PMB_ITER_BY_SIZE(size) \ .L##size: \ mov #(size >> 4), r6; \ shll16 r6; \ shll8 r6; \ \ cmp/hi r5, r6; \ bt 9999f; \ \ mov #(PMB_SZ_##size##M >> 2), r9; \ shll2 r9; \ \ /* \ * Cached mapping \ */ \ mov #PMB_C, r8; \ or r0, r8; \ or r9, r8; \ mov.l r8, @r1; \ mov.l r2, @r3; \ \ /* Increment to the next PMB_DATA entry */ \ add r4, r1; \ /* Increment to the next PMB_ADDR entry */ \ add r4, r3; \ /* Increment number of PMB entries */ \ add #1, r10; \ \ sub r6, r5; \ add r6, r0; \ add r6, r2; \ \ bra .L##size; \ 9999: __PMB_ITER_BY_SIZE(512) __PMB_ITER_BY_SIZE(128) __PMB_ITER_BY_SIZE(64) __PMB_ITER_BY_SIZE(16) #ifdef CONFIG_UNCACHED_MAPPING /* * Now that we can access it, update cached_to_uncached and * uncached_size. */ mov.l .Lcached_to_uncached, r0 mov.l r7, @r0 mov.l .Luncached_size, r0 mov #1, r7 shll16 r7 shll8 r7 mov.l r7, @r0 #endif /* * Clear the remaining PMB entries. * * r3 = entry to begin clearing from * r10 = number of entries we've setup so far */ mov #0, r1 mov #NR_PMB_ENTRIES, r0 .Lagain: mov.l r1, @r3 /* Clear PMB_ADDR entry */ add #1, r10 /* Increment the loop counter */ cmp/eq r0, r10 bf/s .Lagain add r4, r3 /* Increment to the next PMB_ADDR entry */ mov.l 6f, r0 icbi @r0 .Lpmb_done: #endif /* CONFIG_PMB */ #ifndef CONFIG_SH_NO_BSS_INIT /* * Don't clear BSS if running on slow platforms such as an RTL simulation, * remote memory via SHdebug link, etc. For these the memory can be guaranteed * to be all zero on boot anyway. */ ! Clear BSS area #ifdef CONFIG_SMP mov.l 3f, r0 cmp/eq #0, r0 ! skip clear if set to zero bt 10f #endif mov.l 3f, r1 add #4, r1 mov.l 4f, r2 mov #0, r0 9: cmp/hs r2, r1 bf/s 9b ! while (r1 < r2) mov.l r0,@-r2 10: #endif ! Additional CPU initialization mov.l 6f, r0 jsr @r0 nop SYNCO() ! Wait for pending instructions.. ! Start kernel mov.l 5f, r0 jmp @r0 nop .balign 4 #if defined(CONFIG_CPU_SH2) 1: .long 0x000000F0 ! IMASK=0xF #else 1: .long 0x500080F0 ! MD=1, RB=0, BL=1, FD=1, IMASK=0xF #endif ENTRY(stack_start) 2: .long init_thread_union+THREAD_SIZE 3: .long __bss_start 4: .long _end 5: .long start_kernel 6: .long cpu_init 7: .long init_thread_union #ifdef CONFIG_PMB .LPMB_ADDR: .long PMB_ADDR .LPMB_DATA: .long PMB_DATA .LPMB_DATA_MASK: .long PMB_PFN_MASK | PMB_V .LFIRST_ADDR_ENTRY: .long PAGE_OFFSET | PMB_V .LFIRST_DATA_ENTRY: .long __MEMORY_START | PMB_V .LMMUCR: .long MMUCR .LMEMORY_SIZE: .long __MEMORY_SIZE #ifdef CONFIG_UNCACHED_MAPPING .Lcached_to_uncached: .long cached_to_uncached .Luncached_size: .long uncached_size #endif #endif