/* * Copyright 2004-2009 Analog Devices Inc. * 2008-2009 Cambridge Signal Processing * 2005 National ICT Australia (NICTA) * Aidan Williams <aidan@nicta.com.au> * * Licensed under the GPL-2 or later. */ #include <linux/device.h> #include <linux/platform_device.h> #include <linux/mtd/mtd.h> #include <linux/mtd/partitions.h> #include <linux/spi/spi.h> #include <linux/spi/flash.h> #if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE) #include <linux/usb/isp1362.h> #endif #include <linux/ata_platform.h> #include <linux/irq.h> #include <linux/interrupt.h> #include <linux/usb/sl811.h> #include <asm/dma.h> #include <asm/bfin5xx_spi.h> #include <asm/reboot.h> #include <asm/portmux.h> #include <linux/spi/ad7877.h> /* * Name the Board for the /proc/cpuinfo */ const char bfin_board_name[] = "CamSig Minotaur BF537"; #if defined(CONFIG_BFIN_CFPCMCIA) || defined(CONFIG_BFIN_CFPCMCIA_MODULE) static struct resource bfin_pcmcia_cf_resources[] = { { .start = 0x20310000, /* IO PORT */ .end = 0x20312000, .flags = IORESOURCE_MEM, }, { .start = 0x20311000, /* Attribute Memory */ .end = 0x20311FFF, .flags = IORESOURCE_MEM, }, { .start = IRQ_PF4, .end = IRQ_PF4, .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL, }, { .start = IRQ_PF6, /* Card Detect PF6 */ .end = IRQ_PF6, .flags = IORESOURCE_IRQ, }, }; static struct platform_device bfin_pcmcia_cf_device = { .name = "bfin_cf_pcmcia", .id = -1, .num_resources = ARRAY_SIZE(bfin_pcmcia_cf_resources), .resource = bfin_pcmcia_cf_resources, }; #endif #if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE) static struct platform_device rtc_device = { .name = "rtc-bfin", .id = -1, }; #endif #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE) #include <linux/bfin_mac.h> static const unsigned short bfin_mac_peripherals[] = P_MII0; static struct bfin_phydev_platform_data bfin_phydev_data[] = { { .addr = 1, .irq = IRQ_MAC_PHYINT, }, }; static struct bfin_mii_bus_platform_data bfin_mii_bus_data = { .phydev_number = 1, .phydev_data = bfin_phydev_data, .phy_mode = PHY_INTERFACE_MODE_MII, .mac_peripherals = bfin_mac_peripherals, }; static struct platform_device bfin_mii_bus = { .name = "bfin_mii_bus", .dev = { .platform_data = &bfin_mii_bus_data, } }; static struct platform_device bfin_mac_device = { .name = "bfin_mac", .dev = { .platform_data = &bfin_mii_bus, } }; #endif #if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE) static struct resource net2272_bfin_resources[] = { { .start = 0x20300000, .end = 0x20300000 + 0x100, .flags = IORESOURCE_MEM, }, { .start = IRQ_PF7, .end = IRQ_PF7, .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL, }, }; static struct platform_device net2272_bfin_device = { .name = "net2272", .id = -1, .num_resources = ARRAY_SIZE(net2272_bfin_resources), .resource = net2272_bfin_resources, }; #endif #if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE) /* all SPI peripherals info goes here */ #if defined(CONFIG_MTD_M25P80) \ || defined(CONFIG_MTD_M25P80_MODULE) /* Partition sizes */ #define FLASH_SIZE 0x00400000 #define PSIZE_UBOOT 0x00030000 #define PSIZE_INITRAMFS 0x00240000 static struct mtd_partition bfin_spi_flash_partitions[] = { { .name = "bootloader(spi)", .size = PSIZE_UBOOT, .offset = 0x000000, .mask_flags = MTD_CAP_ROM }, { .name = "initramfs(spi)", .size = PSIZE_INITRAMFS, .offset = PSIZE_UBOOT }, { .name = "opt(spi)", .size = FLASH_SIZE - (PSIZE_UBOOT + PSIZE_INITRAMFS), .offset = PSIZE_UBOOT + PSIZE_INITRAMFS, } }; static struct flash_platform_data bfin_spi_flash_data = { .name = "m25p80", .parts = bfin_spi_flash_partitions, .nr_parts = ARRAY_SIZE(bfin_spi_flash_partitions), .type = "m25p64", }; /* SPI flash chip (m25p64) */ static struct bfin5xx_spi_chip spi_flash_chip_info = { .enable_dma = 0, /* use dma transfer with this chip*/ }; #endif #if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE) static struct bfin5xx_spi_chip mmc_spi_chip_info = { .enable_dma = 0, }; #endif static struct spi_board_info bfin_spi_board_info[] __initdata = { #if defined(CONFIG_MTD_M25P80) \ || defined(CONFIG_MTD_M25P80_MODULE) { /* the modalias must be the same as spi device driver name */ .modalias = "m25p80", /* Name of spi_driver for this device */ .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */ .bus_num = 0, /* Framework bus number */ .chip_select = 1, /* Framework chip select. On STAMP537 it is SPISSEL1*/ .platform_data = &bfin_spi_flash_data, .controller_data = &spi_flash_chip_info, .mode = SPI_MODE_3, }, #endif #if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE) { .modalias = "mmc_spi", .max_speed_hz = 5000000, /* max spi clock (SCK) speed in HZ */ .bus_num = 0, .chip_select = 5, .controller_data = &mmc_spi_chip_info, .mode = SPI_MODE_3, }, #endif }; /* SPI controller data */ static struct bfin5xx_spi_master bfin_spi0_info = { .num_chipselect = 8, .enable_dma = 1, /* master has the ability to do dma transfer */ }; /* SPI (0) */ static struct resource bfin_spi0_resource[] = { [0] = { .start = SPI0_REGBASE, .end = SPI0_REGBASE + 0xFF, .flags = IORESOURCE_MEM, }, [1] = { .start = CH_SPI, .end = CH_SPI, .flags = IORESOURCE_DMA, }, [2] = { .start = IRQ_SPI, .end = IRQ_SPI, .flags = IORESOURCE_IRQ, }, }; static struct platform_device bfin_spi0_device = { .name = "bfin-spi", .id = 0, /* Bus number */ .num_resources = ARRAY_SIZE(bfin_spi0_resource), .resource = bfin_spi0_resource, .dev = { .platform_data = &bfin_spi0_info, /* Passed to driver */ }, }; #endif /* spi master and devices */ #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) #ifdef CONFIG_SERIAL_BFIN_UART0 static struct resource bfin_uart0_resources[] = { { .start = UART0_THR, .end = UART0_GCTL+2, .flags = IORESOURCE_MEM, }, { .start = IRQ_UART0_TX, .end = IRQ_UART0_TX, .flags = IORESOURCE_IRQ, }, { .start = IRQ_UART0_RX, .end = IRQ_UART0_RX, .flags = IORESOURCE_IRQ, }, { .start = IRQ_UART0_ERROR, .end = IRQ_UART0_ERROR, .flags = IORESOURCE_IRQ, }, { .start = CH_UART0_TX, .end = CH_UART0_TX, .flags = IORESOURCE_DMA, }, { .start = CH_UART0_RX, .end = CH_UART0_RX, .flags = IORESOURCE_DMA, }, }; static unsigned short bfin_uart0_peripherals[] = { P_UART0_TX, P_UART0_RX, 0 }; static struct platform_device bfin_uart0_device = { .name = "bfin-uart", .id = 0, .num_resources = ARRAY_SIZE(bfin_uart0_resources), .resource = bfin_uart0_resources, .dev = { .platform_data = &bfin_uart0_peripherals, /* Passed to driver */ }, }; #endif #ifdef CONFIG_SERIAL_BFIN_UART1 static struct resource bfin_uart1_resources[] = { { .start = UART1_THR, .end = UART1_GCTL+2, .flags = IORESOURCE_MEM, }, { .start = IRQ_UART1_TX, .end = IRQ_UART1_TX, .flags = IORESOURCE_IRQ, }, { .start = IRQ_UART1_RX, .end = IRQ_UART1_RX, .flags = IORESOURCE_IRQ, }, { .start = IRQ_UART1_ERROR, .end = IRQ_UART1_ERROR, .flags = IORESOURCE_IRQ, }, { .start = CH_UART1_TX, .end = CH_UART1_TX, .flags = IORESOURCE_DMA, }, { .start = CH_UART1_RX, .end = CH_UART1_RX, .flags = IORESOURCE_DMA, }, }; static unsigned short bfin_uart1_peripherals[] = { P_UART1_TX, P_UART1_RX, 0 }; static struct platform_device bfin_uart1_device = { .name = "bfin-uart", .id = 1, .num_resources = ARRAY_SIZE(bfin_uart1_resources), .resource = bfin_uart1_resources, .dev = { .platform_data = &bfin_uart1_peripherals, /* Passed to driver */ }, }; #endif #endif #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) #ifdef CONFIG_BFIN_SIR0 static struct resource bfin_sir0_resources[] = { { .start = 0xFFC00400, .end = 0xFFC004FF, .flags = IORESOURCE_MEM, }, { .start = IRQ_UART0_RX, .end = IRQ_UART0_RX+1, .flags = IORESOURCE_IRQ, }, { .start = CH_UART0_RX, .end = CH_UART0_RX+1, .flags = IORESOURCE_DMA, }, }; static struct platform_device bfin_sir0_device = { .name = "bfin_sir", .id = 0, .num_resources = ARRAY_SIZE(bfin_sir0_resources), .resource = bfin_sir0_resources, }; #endif #ifdef CONFIG_BFIN_SIR1 static struct resource bfin_sir1_resources[] = { { .start = 0xFFC02000, .end = 0xFFC020FF, .flags = IORESOURCE_MEM, }, { .start = IRQ_UART1_RX, .end = IRQ_UART1_RX+1, .flags = IORESOURCE_IRQ, }, { .start = CH_UART1_RX, .end = CH_UART1_RX+1, .flags = IORESOURCE_DMA, }, }; static struct platform_device bfin_sir1_device = { .name = "bfin_sir", .id = 1, .num_resources = ARRAY_SIZE(bfin_sir1_resources), .resource = bfin_sir1_resources, }; #endif #endif #if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE) static const u16 bfin_twi0_pins[] = {P_TWI0_SCL, P_TWI0_SDA, 0}; static struct resource bfin_twi0_resource[] = { [0] = { .start = TWI0_REGBASE, .end = TWI0_REGBASE + 0xFF, .flags = IORESOURCE_MEM, }, [1] = { .start = IRQ_TWI, .end = IRQ_TWI, .flags = IORESOURCE_IRQ, }, }; static struct platform_device i2c_bfin_twi_device = { .name = "i2c-bfin-twi", .id = 0, .num_resources = ARRAY_SIZE(bfin_twi0_resource), .resource = bfin_twi0_resource, .dev = { .platform_data = &bfin_twi0_pins, }, }; #endif #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) #ifdef CONFIG_SERIAL_BFIN_SPORT0_UART static struct resource bfin_sport0_uart_resources[] = { { .start = SPORT0_TCR1, .end = SPORT0_MRCS3+4, .flags = IORESOURCE_MEM, }, { .start = IRQ_SPORT0_RX, .end = IRQ_SPORT0_RX+1, .flags = IORESOURCE_IRQ, }, { .start = IRQ_SPORT0_ERROR, .end = IRQ_SPORT0_ERROR, .flags = IORESOURCE_IRQ, }, }; static unsigned short bfin_sport0_peripherals[] = { P_SPORT0_TFS, P_SPORT0_DTPRI, P_SPORT0_TSCLK, P_SPORT0_RFS, P_SPORT0_DRPRI, P_SPORT0_RSCLK, 0 }; static struct platform_device bfin_sport0_uart_device = { .name = "bfin-sport-uart", .id = 0, .num_resources = ARRAY_SIZE(bfin_sport0_uart_resources), .resource = bfin_sport0_uart_resources, .dev = { .platform_data = &bfin_sport0_peripherals, /* Passed to driver */ }, }; #endif #ifdef CONFIG_SERIAL_BFIN_SPORT1_UART static struct resource bfin_sport1_uart_resources[] = { { .start = SPORT1_TCR1, .end = SPORT1_MRCS3+4, .flags = IORESOURCE_MEM, }, { .start = IRQ_SPORT1_RX, .end = IRQ_SPORT1_RX+1, .flags = IORESOURCE_IRQ, }, { .start = IRQ_SPORT1_ERROR, .end = IRQ_SPORT1_ERROR, .flags = IORESOURCE_IRQ, }, }; static unsigned short bfin_sport1_peripherals[] = { P_SPORT1_TFS, P_SPORT1_DTPRI, P_SPORT1_TSCLK, P_SPORT1_RFS, P_SPORT1_DRPRI, P_SPORT1_RSCLK, 0 }; static struct platform_device bfin_sport1_uart_device = { .name = "bfin-sport-uart", .id = 1, .num_resources = ARRAY_SIZE(bfin_sport1_uart_resources), .resource = bfin_sport1_uart_resources, .dev = { .platform_data = &bfin_sport1_peripherals, /* Passed to driver */ }, }; #endif #endif static struct platform_device *minotaur_devices[] __initdata = { #if defined(CONFIG_BFIN_CFPCMCIA) || defined(CONFIG_BFIN_CFPCMCIA_MODULE) &bfin_pcmcia_cf_device, #endif #if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE) &rtc_device, #endif #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE) &bfin_mii_bus, &bfin_mac_device, #endif #if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE) &net2272_bfin_device, #endif #if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE) &bfin_spi0_device, #endif #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) #ifdef CONFIG_SERIAL_BFIN_UART0 &bfin_uart0_device, #endif #ifdef CONFIG_SERIAL_BFIN_UART1 &bfin_uart1_device, #endif #endif #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) #ifdef CONFIG_BFIN_SIR0 &bfin_sir0_device, #endif #ifdef CONFIG_BFIN_SIR1 &bfin_sir1_device, #endif #endif #if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE) &i2c_bfin_twi_device, #endif #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) #ifdef CONFIG_SERIAL_BFIN_SPORT0_UART &bfin_sport0_uart_device, #endif #ifdef CONFIG_SERIAL_BFIN_SPORT1_UART &bfin_sport1_uart_device, #endif #endif }; static int __init minotaur_init(void) { printk(KERN_INFO "%s(): registering device resources\n", __func__); platform_add_devices(minotaur_devices, ARRAY_SIZE(minotaur_devices)); #if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE) spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info)); #endif return 0; } arch_initcall(minotaur_init); static struct platform_device *minotaur_early_devices[] __initdata = { #if defined(CONFIG_SERIAL_BFIN_CONSOLE) || defined(CONFIG_EARLY_PRINTK) #ifdef CONFIG_SERIAL_BFIN_UART0 &bfin_uart0_device, #endif #ifdef CONFIG_SERIAL_BFIN_UART1 &bfin_uart1_device, #endif #endif #if defined(CONFIG_SERIAL_BFIN_SPORT_CONSOLE) #ifdef CONFIG_SERIAL_BFIN_SPORT0_UART &bfin_sport0_uart_device, #endif #ifdef CONFIG_SERIAL_BFIN_SPORT1_UART &bfin_sport1_uart_device, #endif #endif }; void __init native_machine_early_platform_add_devices(void) { printk(KERN_INFO "register early platform devices\n"); early_platform_add_devices(minotaur_early_devices, ARRAY_SIZE(minotaur_early_devices)); } void native_machine_restart(char *cmd) { /* workaround reboot hang when booting from SPI */ if ((bfin_read_SYSCR() & 0x7) == 0x3) bfin_reset_boot_spi_cs(P_DEFAULT_BOOT_SPI_CS); }