/* * Favr-32 board-specific flash initialization * * Copyright (C) 2008 Atmel Corporation * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ #include <linux/init.h> #include <linux/platform_device.h> #include <linux/mtd/mtd.h> #include <linux/mtd/partitions.h> #include <linux/mtd/physmap.h> #include <mach/smc.h> static struct smc_timing flash_timing __initdata = { .ncs_read_setup = 0, .nrd_setup = 40, .ncs_write_setup = 0, .nwe_setup = 10, .ncs_read_pulse = 80, .nrd_pulse = 40, .ncs_write_pulse = 65, .nwe_pulse = 55, .read_cycle = 120, .write_cycle = 120, }; static struct smc_config flash_config __initdata = { .bus_width = 2, .nrd_controlled = 1, .nwe_controlled = 1, .byte_write = 1, }; static struct mtd_partition flash_parts[] = { { .name = "u-boot", .offset = 0x00000000, .size = 0x00020000, /* 128 KiB */ .mask_flags = MTD_WRITEABLE, }, { .name = "root", .offset = 0x00020000, .size = 0x007d0000, }, { .name = "env", .offset = 0x007f0000, .size = 0x00010000, .mask_flags = MTD_WRITEABLE, }, }; static struct physmap_flash_data flash_data = { .width = 2, .nr_parts = ARRAY_SIZE(flash_parts), .parts = flash_parts, }; static struct resource flash_resource = { .start = 0x00000000, .end = 0x007fffff, .flags = IORESOURCE_MEM, }; static struct platform_device flash_device = { .name = "physmap-flash", .id = 0, .resource = &flash_resource, .num_resources = 1, .dev = { .platform_data = &flash_data, }, }; /* This needs to be called after the SMC has been initialized */ static int __init favr32_flash_init(void) { int ret; smc_set_timing(&flash_config, &flash_timing); ret = smc_set_configuration(0, &flash_config); if (ret < 0) { printk(KERN_ERR "Favr-32: failed to set NOR flash timing\n"); return ret; } platform_device_register(&flash_device); return 0; } device_initcall(favr32_flash_init);