/* * Hardware definitions for TI OMAP1610/5912/1710 processors. * * Cleanup for Linux-2.6 by Dirk Behme <dirk.behme@de.bosch.com> * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the * Free Software Foundation; either version 2 of the License, or (at your * option) any later version. * * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. * * You should have received a copy of the GNU General Public License along * with this program; if not, write to the Free Software Foundation, Inc., * 675 Mass Ave, Cambridge, MA 02139, USA. */ #ifndef __ASM_ARCH_OMAP16XX_H #define __ASM_ARCH_OMAP16XX_H /* * ---------------------------------------------------------------------------- * Base addresses * ---------------------------------------------------------------------------- */ /* Syntax: XX_BASE = Virtual base address, XX_START = Physical base address */ #define OMAP16XX_DSP_BASE 0xE0000000 #define OMAP16XX_DSP_SIZE 0x28000 #define OMAP16XX_DSP_START 0xE0000000 #define OMAP16XX_DSPREG_BASE 0xE1000000 #define OMAP16XX_DSPREG_SIZE SZ_128K #define OMAP16XX_DSPREG_START 0xE1000000 #define OMAP16XX_SEC_BASE 0xFFFE4000 #define OMAP16XX_SEC_DES (OMAP16XX_SEC_BASE + 0x0000) #define OMAP16XX_SEC_SHA1MD5 (OMAP16XX_SEC_BASE + 0x0800) #define OMAP16XX_SEC_RNG (OMAP16XX_SEC_BASE + 0x1000) /* * --------------------------------------------------------------------------- * Interrupts * --------------------------------------------------------------------------- */ #define OMAP_IH2_0_BASE (0xfffe0000) #define OMAP_IH2_1_BASE (0xfffe0100) #define OMAP_IH2_2_BASE (0xfffe0200) #define OMAP_IH2_3_BASE (0xfffe0300) #define OMAP_IH2_0_ITR (OMAP_IH2_0_BASE + 0x00) #define OMAP_IH2_0_MIR (OMAP_IH2_0_BASE + 0x04) #define OMAP_IH2_0_SIR_IRQ (OMAP_IH2_0_BASE + 0x10) #define OMAP_IH2_0_SIR_FIQ (OMAP_IH2_0_BASE + 0x14) #define OMAP_IH2_0_CONTROL (OMAP_IH2_0_BASE + 0x18) #define OMAP_IH2_0_ILR0 (OMAP_IH2_0_BASE + 0x1c) #define OMAP_IH2_0_ISR (OMAP_IH2_0_BASE + 0x9c) #define OMAP_IH2_1_ITR (OMAP_IH2_1_BASE + 0x00) #define OMAP_IH2_1_MIR (OMAP_IH2_1_BASE + 0x04) #define OMAP_IH2_1_SIR_IRQ (OMAP_IH2_1_BASE + 0x10) #define OMAP_IH2_1_SIR_FIQ (OMAP_IH2_1_BASE + 0x14) #define OMAP_IH2_1_CONTROL (OMAP_IH2_1_BASE + 0x18) #define OMAP_IH2_1_ILR1 (OMAP_IH2_1_BASE + 0x1c) #define OMAP_IH2_1_ISR (OMAP_IH2_1_BASE + 0x9c) #define OMAP_IH2_2_ITR (OMAP_IH2_2_BASE + 0x00) #define OMAP_IH2_2_MIR (OMAP_IH2_2_BASE + 0x04) #define OMAP_IH2_2_SIR_IRQ (OMAP_IH2_2_BASE + 0x10) #define OMAP_IH2_2_SIR_FIQ (OMAP_IH2_2_BASE + 0x14) #define OMAP_IH2_2_CONTROL (OMAP_IH2_2_BASE + 0x18) #define OMAP_IH2_2_ILR2 (OMAP_IH2_2_BASE + 0x1c) #define OMAP_IH2_2_ISR (OMAP_IH2_2_BASE + 0x9c) #define OMAP_IH2_3_ITR (OMAP_IH2_3_BASE + 0x00) #define OMAP_IH2_3_MIR (OMAP_IH2_3_BASE + 0x04) #define OMAP_IH2_3_SIR_IRQ (OMAP_IH2_3_BASE + 0x10) #define OMAP_IH2_3_SIR_FIQ (OMAP_IH2_3_BASE + 0x14) #define OMAP_IH2_3_CONTROL (OMAP_IH2_3_BASE + 0x18) #define OMAP_IH2_3_ILR3 (OMAP_IH2_3_BASE + 0x1c) #define OMAP_IH2_3_ISR (OMAP_IH2_3_BASE + 0x9c) /* * ---------------------------------------------------------------------------- * Clocks * ---------------------------------------------------------------------------- */ #define OMAP16XX_ARM_IDLECT3 (CLKGEN_REG_BASE + 0x24) /* * ---------------------------------------------------------------------------- * Pin configuration registers * ---------------------------------------------------------------------------- */ #define OMAP16XX_CONF_VOLTAGE_VDDSHV6 (1 << 8) #define OMAP16XX_CONF_VOLTAGE_VDDSHV7 (1 << 9) #define OMAP16XX_CONF_VOLTAGE_VDDSHV8 (1 << 10) #define OMAP16XX_CONF_VOLTAGE_VDDSHV9 (1 << 11) #define OMAP16XX_SUBLVDS_CONF_VALID (1 << 13) /* * ---------------------------------------------------------------------------- * System control registers * ---------------------------------------------------------------------------- */ #define OMAP1610_RESET_CONTROL 0xfffe1140 /* * --------------------------------------------------------------------------- * TIPB bus interface * --------------------------------------------------------------------------- */ #define TIPB_SWITCH_BASE (0xfffbc800) #define OMAP16XX_MMCSD2_SSW_MPU_CONF (TIPB_SWITCH_BASE + 0x160) /* UART3 Registers Mapping through MPU bus */ #define UART3_RHR (OMAP1_UART3_BASE + 0) #define UART3_THR (OMAP1_UART3_BASE + 0) #define UART3_DLL (OMAP1_UART3_BASE + 0) #define UART3_IER (OMAP1_UART3_BASE + 4) #define UART3_DLH (OMAP1_UART3_BASE + 4) #define UART3_IIR (OMAP1_UART3_BASE + 8) #define UART3_FCR (OMAP1_UART3_BASE + 8) #define UART3_EFR (OMAP1_UART3_BASE + 8) #define UART3_LCR (OMAP1_UART3_BASE + 0x0C) #define UART3_MCR (OMAP1_UART3_BASE + 0x10) #define UART3_XON1_ADDR1 (OMAP1_UART3_BASE + 0x10) #define UART3_XON2_ADDR2 (OMAP1_UART3_BASE + 0x14) #define UART3_LSR (OMAP1_UART3_BASE + 0x14) #define UART3_TCR (OMAP1_UART3_BASE + 0x18) #define UART3_MSR (OMAP1_UART3_BASE + 0x18) #define UART3_XOFF1 (OMAP1_UART3_BASE + 0x18) #define UART3_XOFF2 (OMAP1_UART3_BASE + 0x1C) #define UART3_SPR (OMAP1_UART3_BASE + 0x1C) #define UART3_TLR (OMAP1_UART3_BASE + 0x1C) #define UART3_MDR1 (OMAP1_UART3_BASE + 0x20) #define UART3_MDR2 (OMAP1_UART3_BASE + 0x24) #define UART3_SFLSR (OMAP1_UART3_BASE + 0x28) #define UART3_TXFLL (OMAP1_UART3_BASE + 0x28) #define UART3_RESUME (OMAP1_UART3_BASE + 0x2C) #define UART3_TXFLH (OMAP1_UART3_BASE + 0x2C) #define UART3_SFREGL (OMAP1_UART3_BASE + 0x30) #define UART3_RXFLL (OMAP1_UART3_BASE + 0x30) #define UART3_SFREGH (OMAP1_UART3_BASE + 0x34) #define UART3_RXFLH (OMAP1_UART3_BASE + 0x34) #define UART3_BLR (OMAP1_UART3_BASE + 0x38) #define UART3_ACREG (OMAP1_UART3_BASE + 0x3C) #define UART3_DIV16 (OMAP1_UART3_BASE + 0x3C) #define UART3_SCR (OMAP1_UART3_BASE + 0x40) #define UART3_SSR (OMAP1_UART3_BASE + 0x44) #define UART3_EBLR (OMAP1_UART3_BASE + 0x48) #define UART3_OSC_12M_SEL (OMAP1_UART3_BASE + 0x4C) #define UART3_MVR (OMAP1_UART3_BASE + 0x50) /* * --------------------------------------------------------------------------- * Watchdog timer * --------------------------------------------------------------------------- */ /* 32-bit Watchdog timer in OMAP 16XX */ #define OMAP_16XX_WATCHDOG_BASE (0xfffeb000) #define OMAP_16XX_WIDR (OMAP_16XX_WATCHDOG_BASE + 0x00) #define OMAP_16XX_WD_SYSCONFIG (OMAP_16XX_WATCHDOG_BASE + 0x10) #define OMAP_16XX_WD_SYSSTATUS (OMAP_16XX_WATCHDOG_BASE + 0x14) #define OMAP_16XX_WCLR (OMAP_16XX_WATCHDOG_BASE + 0x24) #define OMAP_16XX_WCRR (OMAP_16XX_WATCHDOG_BASE + 0x28) #define OMAP_16XX_WLDR (OMAP_16XX_WATCHDOG_BASE + 0x2c) #define OMAP_16XX_WTGR (OMAP_16XX_WATCHDOG_BASE + 0x30) #define OMAP_16XX_WWPS (OMAP_16XX_WATCHDOG_BASE + 0x34) #define OMAP_16XX_WSPR (OMAP_16XX_WATCHDOG_BASE + 0x48) #define WCLR_PRE_SHIFT 5 #define WCLR_PTV_SHIFT 2 #define WWPS_W_PEND_WSPR (1 << 4) #define WWPS_W_PEND_WTGR (1 << 3) #define WWPS_W_PEND_WLDR (1 << 2) #define WWPS_W_PEND_WCRR (1 << 1) #define WWPS_W_PEND_WCLR (1 << 0) #define WSPR_ENABLE_0 (0x0000bbbb) #define WSPR_ENABLE_1 (0x00004444) #define WSPR_DISABLE_0 (0x0000aaaa) #define WSPR_DISABLE_1 (0x00005555) #define OMAP16XX_DSP_MMU_BASE (0xfffed200) #define OMAP16XX_MAILBOX_BASE (0xfffcf000) #endif /* __ASM_ARCH_OMAP16XX_H */