/* * arch/arm/plat-omap/include/mach/irqs.h * * Copyright (C) Greg Lonnon 2001 * Updated for OMAP-1610 by Tony Lindgren <tony@atomide.com> * * Copyright (C) 2009 Texas Instruments * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA * * NOTE: The interrupt vectors for the OMAP-1509, OMAP-1510, and OMAP-1610 * are different. */ #ifndef __ASM_ARCH_OMAP15XX_IRQS_H #define __ASM_ARCH_OMAP15XX_IRQS_H /* * IRQ numbers for interrupt handler 1 * * NOTE: See also the OMAP-1510 and 1610 specific IRQ numbers below * */ #define INT_CAMERA 1 #define INT_FIQ 3 #define INT_RTDX 6 #define INT_DSP_MMU_ABORT 7 #define INT_HOST 8 #define INT_ABORT 9 #define INT_BRIDGE_PRIV 13 #define INT_GPIO_BANK1 14 #define INT_UART3 15 #define INT_TIMER3 16 #define INT_DMA_CH0_6 19 #define INT_DMA_CH1_7 20 #define INT_DMA_CH2_8 21 #define INT_DMA_CH3 22 #define INT_DMA_CH4 23 #define INT_DMA_CH5 24 #define INT_TIMER1 26 #define INT_WD_TIMER 27 #define INT_BRIDGE_PUB 28 #define INT_TIMER2 30 #define INT_LCD_CTRL 31 /* * OMAP-1510 specific IRQ numbers for interrupt handler 1 */ #define INT_1510_IH2_IRQ 0 #define INT_1510_RES2 2 #define INT_1510_SPI_TX 4 #define INT_1510_SPI_RX 5 #define INT_1510_DSP_MAILBOX1 10 #define INT_1510_DSP_MAILBOX2 11 #define INT_1510_RES12 12 #define INT_1510_LB_MMU 17 #define INT_1510_RES18 18 #define INT_1510_LOCAL_BUS 29 /* * OMAP-1610 specific IRQ numbers for interrupt handler 1 */ #define INT_1610_IH2_IRQ INT_1510_IH2_IRQ #define INT_1610_IH2_FIQ 2 #define INT_1610_McBSP2_TX 4 #define INT_1610_McBSP2_RX 5 #define INT_1610_DSP_MAILBOX1 10 #define INT_1610_DSP_MAILBOX2 11 #define INT_1610_LCD_LINE 12 #define INT_1610_GPTIMER1 17 #define INT_1610_GPTIMER2 18 #define INT_1610_SSR_FIFO_0 29 /* * OMAP-7xx specific IRQ numbers for interrupt handler 1 */ #define INT_7XX_IH2_FIQ 0 #define INT_7XX_IH2_IRQ 1 #define INT_7XX_USB_NON_ISO 2 #define INT_7XX_USB_ISO 3 #define INT_7XX_ICR 4 #define INT_7XX_EAC 5 #define INT_7XX_GPIO_BANK1 6 #define INT_7XX_GPIO_BANK2 7 #define INT_7XX_GPIO_BANK3 8 #define INT_7XX_McBSP2TX 10 #define INT_7XX_McBSP2RX 11 #define INT_7XX_McBSP2RX_OVF 12 #define INT_7XX_LCD_LINE 14 #define INT_7XX_GSM_PROTECT 15 #define INT_7XX_TIMER3 16 #define INT_7XX_GPIO_BANK5 17 #define INT_7XX_GPIO_BANK6 18 #define INT_7XX_SPGIO_WR 29 /* * IRQ numbers for interrupt handler 2 * * NOTE: See also the OMAP-1510 and 1610 specific IRQ numbers below */ #define IH2_BASE 32 #define INT_KEYBOARD (1 + IH2_BASE) #define INT_uWireTX (2 + IH2_BASE) #define INT_uWireRX (3 + IH2_BASE) #define INT_I2C (4 + IH2_BASE) #define INT_MPUIO (5 + IH2_BASE) #define INT_USB_HHC_1 (6 + IH2_BASE) #define INT_McBSP3TX (10 + IH2_BASE) #define INT_McBSP3RX (11 + IH2_BASE) #define INT_McBSP1TX (12 + IH2_BASE) #define INT_McBSP1RX (13 + IH2_BASE) #define INT_UART1 (14 + IH2_BASE) #define INT_UART2 (15 + IH2_BASE) #define INT_BT_MCSI1TX (16 + IH2_BASE) #define INT_BT_MCSI1RX (17 + IH2_BASE) #define INT_SOSSI_MATCH (19 + IH2_BASE) #define INT_USB_W2FC (20 + IH2_BASE) #define INT_1WIRE (21 + IH2_BASE) #define INT_OS_TIMER (22 + IH2_BASE) #define INT_MMC (23 + IH2_BASE) #define INT_GAUGE_32K (24 + IH2_BASE) #define INT_RTC_TIMER (25 + IH2_BASE) #define INT_RTC_ALARM (26 + IH2_BASE) #define INT_MEM_STICK (27 + IH2_BASE) /* * OMAP-1510 specific IRQ numbers for interrupt handler 2 */ #define INT_1510_DSP_MMU (28 + IH2_BASE) #define INT_1510_COM_SPI_RO (31 + IH2_BASE) /* * OMAP-1610 specific IRQ numbers for interrupt handler 2 */ #define INT_1610_FAC (0 + IH2_BASE) #define INT_1610_USB_HHC_2 (7 + IH2_BASE) #define INT_1610_USB_OTG (8 + IH2_BASE) #define INT_1610_SoSSI (9 + IH2_BASE) #define INT_1610_SoSSI_MATCH (19 + IH2_BASE) #define INT_1610_DSP_MMU (28 + IH2_BASE) #define INT_1610_McBSP2RX_OF (31 + IH2_BASE) #define INT_1610_STI (32 + IH2_BASE) #define INT_1610_STI_WAKEUP (33 + IH2_BASE) #define INT_1610_GPTIMER3 (34 + IH2_BASE) #define INT_1610_GPTIMER4 (35 + IH2_BASE) #define INT_1610_GPTIMER5 (36 + IH2_BASE) #define INT_1610_GPTIMER6 (37 + IH2_BASE) #define INT_1610_GPTIMER7 (38 + IH2_BASE) #define INT_1610_GPTIMER8 (39 + IH2_BASE) #define INT_1610_GPIO_BANK2 (40 + IH2_BASE) #define INT_1610_GPIO_BANK3 (41 + IH2_BASE) #define INT_1610_MMC2 (42 + IH2_BASE) #define INT_1610_CF (43 + IH2_BASE) #define INT_1610_WAKE_UP_REQ (46 + IH2_BASE) #define INT_1610_GPIO_BANK4 (48 + IH2_BASE) #define INT_1610_SPI (49 + IH2_BASE) #define INT_1610_DMA_CH6 (53 + IH2_BASE) #define INT_1610_DMA_CH7 (54 + IH2_BASE) #define INT_1610_DMA_CH8 (55 + IH2_BASE) #define INT_1610_DMA_CH9 (56 + IH2_BASE) #define INT_1610_DMA_CH10 (57 + IH2_BASE) #define INT_1610_DMA_CH11 (58 + IH2_BASE) #define INT_1610_DMA_CH12 (59 + IH2_BASE) #define INT_1610_DMA_CH13 (60 + IH2_BASE) #define INT_1610_DMA_CH14 (61 + IH2_BASE) #define INT_1610_DMA_CH15 (62 + IH2_BASE) #define INT_1610_NAND (63 + IH2_BASE) #define INT_1610_SHA1MD5 (91 + IH2_BASE) /* * OMAP-7xx specific IRQ numbers for interrupt handler 2 */ #define INT_7XX_HW_ERRORS (0 + IH2_BASE) #define INT_7XX_NFIQ_PWR_FAIL (1 + IH2_BASE) #define INT_7XX_CFCD (2 + IH2_BASE) #define INT_7XX_CFIREQ (3 + IH2_BASE) #define INT_7XX_I2C (4 + IH2_BASE) #define INT_7XX_PCC (5 + IH2_BASE) #define INT_7XX_MPU_EXT_NIRQ (6 + IH2_BASE) #define INT_7XX_SPI_100K_1 (7 + IH2_BASE) #define INT_7XX_SYREN_SPI (8 + IH2_BASE) #define INT_7XX_VLYNQ (9 + IH2_BASE) #define INT_7XX_GPIO_BANK4 (10 + IH2_BASE) #define INT_7XX_McBSP1TX (11 + IH2_BASE) #define INT_7XX_McBSP1RX (12 + IH2_BASE) #define INT_7XX_McBSP1RX_OF (13 + IH2_BASE) #define INT_7XX_UART_MODEM_IRDA_2 (14 + IH2_BASE) #define INT_7XX_UART_MODEM_1 (15 + IH2_BASE) #define INT_7XX_MCSI (16 + IH2_BASE) #define INT_7XX_uWireTX (17 + IH2_BASE) #define INT_7XX_uWireRX (18 + IH2_BASE) #define INT_7XX_SMC_CD (19 + IH2_BASE) #define INT_7XX_SMC_IREQ (20 + IH2_BASE) #define INT_7XX_HDQ_1WIRE (21 + IH2_BASE) #define INT_7XX_TIMER32K (22 + IH2_BASE) #define INT_7XX_MMC_SDIO (23 + IH2_BASE) #define INT_7XX_UPLD (24 + IH2_BASE) #define INT_7XX_USB_HHC_1 (27 + IH2_BASE) #define INT_7XX_USB_HHC_2 (28 + IH2_BASE) #define INT_7XX_USB_GENI (29 + IH2_BASE) #define INT_7XX_USB_OTG (30 + IH2_BASE) #define INT_7XX_CAMERA_IF (31 + IH2_BASE) #define INT_7XX_RNG (32 + IH2_BASE) #define INT_7XX_DUAL_MODE_TIMER (33 + IH2_BASE) #define INT_7XX_DBB_RF_EN (34 + IH2_BASE) #define INT_7XX_MPUIO_KEYPAD (35 + IH2_BASE) #define INT_7XX_SHA1_MD5 (36 + IH2_BASE) #define INT_7XX_SPI_100K_2 (37 + IH2_BASE) #define INT_7XX_RNG_IDLE (38 + IH2_BASE) #define INT_7XX_MPUIO (39 + IH2_BASE) #define INT_7XX_LLPC_LCD_CTRL_CAN_BE_OFF (40 + IH2_BASE) #define INT_7XX_LLPC_OE_FALLING (41 + IH2_BASE) #define INT_7XX_LLPC_OE_RISING (42 + IH2_BASE) #define INT_7XX_LLPC_VSYNC (43 + IH2_BASE) #define INT_7XX_WAKE_UP_REQ (46 + IH2_BASE) #define INT_7XX_DMA_CH6 (53 + IH2_BASE) #define INT_7XX_DMA_CH7 (54 + IH2_BASE) #define INT_7XX_DMA_CH8 (55 + IH2_BASE) #define INT_7XX_DMA_CH9 (56 + IH2_BASE) #define INT_7XX_DMA_CH10 (57 + IH2_BASE) #define INT_7XX_DMA_CH11 (58 + IH2_BASE) #define INT_7XX_DMA_CH12 (59 + IH2_BASE) #define INT_7XX_DMA_CH13 (60 + IH2_BASE) #define INT_7XX_DMA_CH14 (61 + IH2_BASE) #define INT_7XX_DMA_CH15 (62 + IH2_BASE) #define INT_7XX_NAND (63 + IH2_BASE) /* Max. 128 level 2 IRQs (OMAP1610), 192 GPIOs (OMAP730/850) and * 16 MPUIO lines */ #define OMAP_MAX_GPIO_LINES 192 #define IH_GPIO_BASE (128 + IH2_BASE) #define IH_MPUIO_BASE (OMAP_MAX_GPIO_LINES + IH_GPIO_BASE) #define OMAP_IRQ_END (IH_MPUIO_BASE + 16) /* External FPGA handles interrupts on Innovator boards */ #define OMAP_FPGA_IRQ_BASE (OMAP_IRQ_END) #ifdef CONFIG_MACH_OMAP_INNOVATOR #define OMAP_FPGA_NR_IRQS 24 #else #define OMAP_FPGA_NR_IRQS 0 #endif #define OMAP_FPGA_IRQ_END (OMAP_FPGA_IRQ_BASE + OMAP_FPGA_NR_IRQS) #define NR_IRQS OMAP_FPGA_IRQ_END #define OMAP_IRQ_BIT(irq) (1 << ((irq) % 32)) #include <mach/hardware.h> #ifdef CONFIG_FIQ #define FIQ_START 1024 #endif #endif