/*
* at91sam9g45.dtsi - Device Tree Include file for AT91SAM9G45 family SoC
* applies to AT91SAM9G45, AT91SAM9M10,
* AT91SAM9G46, AT91SAM9M11 SoC
*
* Copyright (C) 2011 Atmel,
* 2011 Nicolas Ferre <nicolas.ferre@atmel.com>
*
* Licensed under GPLv2 or later.
*/
/include/ "skeleton.dtsi"
/ {
model = "Atmel AT91SAM9G45 family SoC";
compatible = "atmel,at91sam9g45";
interrupt-parent = <&aic>;
aliases {
serial0 = &dbgu;
serial1 = &usart0;
serial2 = &usart1;
serial3 = &usart2;
serial4 = &usart3;
gpio0 = &pioA;
gpio1 = &pioB;
gpio2 = &pioC;
gpio3 = &pioD;
gpio4 = &pioE;
tcb0 = &tcb0;
tcb1 = &tcb1;
i2c0 = &i2c0;
i2c1 = &i2c1;
ssc0 = &ssc0;
ssc1 = &ssc1;
};
cpus {
cpu@0 {
compatible = "arm,arm926ejs";
};
};
memory {
reg = <0x70000000 0x10000000>;
};
ahb {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges;
apb {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges;
aic: interrupt-controller@fffff000 {
#interrupt-cells = <3>;
compatible = "atmel,at91rm9200-aic";
interrupt-controller;
reg = <0xfffff000 0x200>;
atmel,external-irqs = <31>;
};
ramc0: ramc@ffffe400 {
compatible = "atmel,at91sam9g45-ddramc";
reg = <0xffffe400 0x200
0xffffe600 0x200>;
};
pmc: pmc@fffffc00 {
compatible = "atmel,at91rm9200-pmc";
reg = <0xfffffc00 0x100>;
};
rstc@fffffd00 {
compatible = "atmel,at91sam9g45-rstc";
reg = <0xfffffd00 0x10>;
};
pit: timer@fffffd30 {
compatible = "atmel,at91sam9260-pit";
reg = <0xfffffd30 0xf>;
interrupts = <1 4 7>;
};
shdwc@fffffd10 {
compatible = "atmel,at91sam9rl-shdwc";
reg = <0xfffffd10 0x10>;
};
tcb0: timer@fff7c000 {
compatible = "atmel,at91rm9200-tcb";
reg = <0xfff7c000 0x100>;
interrupts = <18 4 0>;
};
tcb1: timer@fffd4000 {
compatible = "atmel,at91rm9200-tcb";
reg = <0xfffd4000 0x100>;
interrupts = <18 4 0>;
};
dma: dma-controller@ffffec00 {
compatible = "atmel,at91sam9g45-dma";
reg = <0xffffec00 0x200>;
interrupts = <21 4 0>;
#dma-cells = <2>;
};
pinctrl@fffff200 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "atmel,at91rm9200-pinctrl", "simple-bus";
ranges = <0xfffff200 0xfffff200 0xa00>;
atmel,mux-mask = <
/* A B */
0xffffffff 0xffc003ff /* pioA */
0xffffffff 0x800f8f00 /* pioB */
0xffffffff 0x00000e00 /* pioC */
0xffffffff 0xff0c1381 /* pioD */
0xffffffff 0x81ffff81 /* pioE */
>;
/* shared pinctrl settings */
dbgu {
pinctrl_dbgu: dbgu-0 {
atmel,pins =
<1 12 0x1 0x0 /* PB12 periph A */
1 13 0x1 0x0>; /* PB13 periph A */
};
};
usart0 {
pinctrl_usart0: usart0-0 {
atmel,pins =
<1 19 0x1 0x1 /* PB19 periph A with pullup */
1 18 0x1 0x0>; /* PB18 periph A */
};
pinctrl_usart0_rts: usart0_rts-0 {
atmel,pins =
<1 17 0x2 0x0>; /* PB17 periph B */
};
pinctrl_usart0_cts: usart0_cts-0 {
atmel,pins =
<1 15 0x2 0x0>; /* PB15 periph B */
};
};
uart1 {
pinctrl_usart1: usart1-0 {
atmel,pins =
<1 4 0x1 0x1 /* PB4 periph A with pullup */
1 5 0x1 0x0>; /* PB5 periph A */
};
pinctrl_usart1_rts: usart1_rts-0 {
atmel,pins =
<3 16 0x1 0x0>; /* PD16 periph A */
};
pinctrl_usart1_cts: usart1_cts-0 {
atmel,pins =
<3 17 0x1 0x0>; /* PD17 periph A */
};
};
usart2 {
pinctrl_usart2: usart2-0 {
atmel,pins =
<1 6 0x1 0x1 /* PB6 periph A with pullup */
1 7 0x1 0x0>; /* PB7 periph A */
};
pinctrl_usart2_rts: usart2_rts-0 {
atmel,pins =
<2 9 0x2 0x0>; /* PC9 periph B */
};
pinctrl_usart2_cts: usart2_cts-0 {
atmel,pins =
<2 11 0x2 0x0>; /* PC11 periph B */
};
};
usart3 {
pinctrl_usart3: usart3-0 {
atmel,pins =
<1 8 0x1 0x1 /* PB9 periph A with pullup */
1 9 0x1 0x0>; /* PB8 periph A */
};
pinctrl_usart3_rts: usart3_rts-0 {
atmel,pins =
<0 23 0x2 0x0>; /* PA23 periph B */
};
pinctrl_usart3_cts: usart3_cts-0 {
atmel,pins =
<0 24 0x2 0x0>; /* PA24 periph B */
};
};
nand {
pinctrl_nand: nand-0 {
atmel,pins =
<2 8 0x0 0x1 /* PC8 gpio RDY pin pull_up*/
2 14 0x0 0x1>; /* PC14 gpio enable pin pull_up */
};
};
macb {
pinctrl_macb_rmii: macb_rmii-0 {
atmel,pins =
<0 10 0x1 0x0 /* PA10 periph A */
0 11 0x1 0x0 /* PA11 periph A */
0 12 0x1 0x0 /* PA12 periph A */
0 13 0x1 0x0 /* PA13 periph A */
0 14 0x1 0x0 /* PA14 periph A */
0 15 0x1 0x0 /* PA15 periph A */
0 16 0x1 0x0 /* PA16 periph A */
0 17 0x1 0x0 /* PA17 periph A */
0 18 0x1 0x0 /* PA18 periph A */
0 19 0x1 0x0>; /* PA19 periph A */
};
pinctrl_macb_rmii_mii: macb_rmii_mii-0 {
atmel,pins =
<0 6 0x2 0x0 /* PA6 periph B */
0 7 0x2 0x0 /* PA7 periph B */
0 8 0x2 0x0 /* PA8 periph B */
0 9 0x2 0x0 /* PA9 periph B */
0 27 0x2 0x0 /* PA27 periph B */
0 28 0x2 0x0 /* PA28 periph B */
0 29 0x2 0x0 /* PA29 periph B */
0 30 0x2 0x0>; /* PA30 periph B */
};
};
mmc0 {
pinctrl_mmc0_slot0_clk_cmd_dat0: mmc0_slot0_clk_cmd_dat0-0 {
atmel,pins =
<0 0 0x1 0x0 /* PA0 periph A */
0 1 0x1 0x1 /* PA1 periph A with pullup */
0 2 0x1 0x1>; /* PA2 periph A with pullup */
};
pinctrl_mmc0_slot0_dat1_3: mmc0_slot0_dat1_3-0 {
atmel,pins =
<0 3 0x1 0x1 /* PA3 periph A with pullup */
0 4 0x1 0x1 /* PA4 periph A with pullup */
0 5 0x1 0x1>; /* PA5 periph A with pullup */
};
pinctrl_mmc0_slot0_dat4_7: mmc0_slot0_dat4_7-0 {
atmel,pins =
<0 6 0x1 0x1 /* PA6 periph A with pullup */
0 7 0x1 0x1 /* PA7 periph A with pullup */
0 8 0x1 0x1 /* PA8 periph A with pullup */
0 9 0x1 0x1>; /* PA9 periph A with pullup */
};
};
mmc1 {
pinctrl_mmc1_slot0_clk_cmd_dat0: mmc1_slot0_clk_cmd_dat0-0 {
atmel,pins =
<0 31 0x1 0x0 /* PA31 periph A */
0 22 0x1 0x1 /* PA22 periph A with pullup */
0 23 0x1 0x1>; /* PA23 periph A with pullup */
};
pinctrl_mmc1_slot0_dat1_3: mmc1_slot0_dat1_3-0 {
atmel,pins =
<0 24 0x1 0x1 /* PA24 periph A with pullup */
0 25 0x1 0x1 /* PA25 periph A with pullup */
0 26 0x1 0x1>; /* PA26 periph A with pullup */
};
pinctrl_mmc1_slot0_dat4_7: mmc1_slot0_dat4_7-0 {
atmel,pins =
<0 27 0x1 0x1 /* PA27 periph A with pullup */
0 28 0x1 0x1 /* PA28 periph A with pullup */
0 29 0x1 0x1 /* PA29 periph A with pullup */
0 20 0x1 0x1>; /* PA30 periph A with pullup */
};
};
ssc0 {
pinctrl_ssc0_tx: ssc0_tx-0 {
atmel,pins =
<3 0 0x1 0x0 /* PD0 periph A */
3 1 0x1 0x0 /* PD1 periph A */
3 2 0x1 0x0>; /* PD2 periph A */
};
pinctrl_ssc0_rx: ssc0_rx-0 {
atmel,pins =
<3 3 0x1 0x0 /* PD3 periph A */
3 4 0x1 0x0 /* PD4 periph A */
3 5 0x1 0x0>; /* PD5 periph A */
};
};
ssc1 {
pinctrl_ssc1_tx: ssc1_tx-0 {
atmel,pins =
<3 10 0x1 0x0 /* PD10 periph A */
3 11 0x1 0x0 /* PD11 periph A */
3 12 0x1 0x0>; /* PD12 periph A */
};
pinctrl_ssc1_rx: ssc1_rx-0 {
atmel,pins =
<3 13 0x1 0x0 /* PD13 periph A */
3 14 0x1 0x0 /* PD14 periph A */
3 15 0x1 0x0>; /* PD15 periph A */
};
};
spi0 {
pinctrl_spi0: spi0-0 {
atmel,pins =
<1 0 0x1 0x0 /* PB0 periph A SPI0_MISO pin */
1 1 0x1 0x0 /* PB1 periph A SPI0_MOSI pin */
1 2 0x1 0x0>; /* PB2 periph A SPI0_SPCK pin */
};
};
spi1 {
pinctrl_spi1: spi1-0 {
atmel,pins =
<1 14 0x1 0x0 /* PB14 periph A SPI1_MISO pin */
1 15 0x1 0x0 /* PB15 periph A SPI1_MOSI pin */
1 16 0x1 0x0>; /* PB16 periph A SPI1_SPCK pin */
};
};
pioA: gpio@fffff200 {
compatible = "atmel,at91rm9200-gpio";
reg = <0xfffff200 0x200>;
interrupts = <2 4 1>;
#gpio-cells = <2>;
gpio-controller;
interrupt-controller;
#interrupt-cells = <2>;
};
pioB: gpio@fffff400 {
compatible = "atmel,at91rm9200-gpio";
reg = <0xfffff400 0x200>;
interrupts = <3 4 1>;
#gpio-cells = <2>;
gpio-controller;
interrupt-controller;
#interrupt-cells = <2>;
};
pioC: gpio@fffff600 {
compatible = "atmel,at91rm9200-gpio";
reg = <0xfffff600 0x200>;
interrupts = <4 4 1>;
#gpio-cells = <2>;
gpio-controller;
interrupt-controller;
#interrupt-cells = <2>;
};
pioD: gpio@fffff800 {
compatible = "atmel,at91rm9200-gpio";
reg = <0xfffff800 0x200>;
interrupts = <5 4 1>;
#gpio-cells = <2>;
gpio-controller;
interrupt-controller;
#interrupt-cells = <2>;
};
pioE: gpio@fffffa00 {
compatible = "atmel,at91rm9200-gpio";
reg = <0xfffffa00 0x200>;
interrupts = <5 4 1>;
#gpio-cells = <2>;
gpio-controller;
interrupt-controller;
#interrupt-cells = <2>;
};
};
dbgu: serial@ffffee00 {
compatible = "atmel,at91sam9260-usart";
reg = <0xffffee00 0x200>;
interrupts = <1 4 7>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_dbgu>;
status = "disabled";
};
usart0: serial@fff8c000 {
compatible = "atmel,at91sam9260-usart";
reg = <0xfff8c000 0x200>;
interrupts = <7 4 5>;
atmel,use-dma-rx;
atmel,use-dma-tx;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usart0>;
status = "disabled";
};
usart1: serial@fff90000 {
compatible = "atmel,at91sam9260-usart";
reg = <0xfff90000 0x200>;
interrupts = <8 4 5>;
atmel,use-dma-rx;
atmel,use-dma-tx;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usart1>;
status = "disabled";
};
usart2: serial@fff94000 {
compatible = "atmel,at91sam9260-usart";
reg = <0xfff94000 0x200>;
interrupts = <9 4 5>;
atmel,use-dma-rx;
atmel,use-dma-tx;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usart2>;
status = "disabled";
};
usart3: serial@fff98000 {
compatible = "atmel,at91sam9260-usart";
reg = <0xfff98000 0x200>;
interrupts = <10 4 5>;
atmel,use-dma-rx;
atmel,use-dma-tx;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usart3>;
status = "disabled";
};
macb0: ethernet@fffbc000 {
compatible = "cdns,at32ap7000-macb", "cdns,macb";
reg = <0xfffbc000 0x100>;
interrupts = <25 4 3>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_macb_rmii>;
status = "disabled";
};
i2c0: i2c@fff84000 {
compatible = "atmel,at91sam9g10-i2c";
reg = <0xfff84000 0x100>;
interrupts = <12 4 6>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
i2c1: i2c@fff88000 {
compatible = "atmel,at91sam9g10-i2c";
reg = <0xfff88000 0x100>;
interrupts = <13 4 6>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
ssc0: ssc@fff9c000 {
compatible = "atmel,at91sam9g45-ssc";
reg = <0xfff9c000 0x4000>;
interrupts = <16 4 5>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>;
status = "disabled";
};
ssc1: ssc@fffa0000 {
compatible = "atmel,at91sam9g45-ssc";
reg = <0xfffa0000 0x4000>;
interrupts = <17 4 5>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ssc1_tx &pinctrl_ssc1_rx>;
status = "disabled";
};
adc0: adc@fffb0000 {
compatible = "atmel,at91sam9260-adc";
reg = <0xfffb0000 0x100>;
interrupts = <20 4 0>;
atmel,adc-use-external-triggers;
atmel,adc-channels-used = <0xff>;
atmel,adc-vref = <3300>;
atmel,adc-num-channels = <8>;
atmel,adc-startup-time = <40>;
atmel,adc-channel-base = <0x30>;
atmel,adc-drdy-mask = <0x10000>;
atmel,adc-status-register = <0x1c>;
atmel,adc-trigger-register = <0x08>;
atmel,adc-res = <8 10>;
atmel,adc-res-names = "lowres", "highres";
atmel,adc-use-res = "highres";
trigger@0 {
trigger-name = "external-rising";
trigger-value = <0x1>;
trigger-external;
};
trigger@1 {
trigger-name = "external-falling";
trigger-value = <0x2>;
trigger-external;
};
trigger@2 {
trigger-name = "external-any";
trigger-value = <0x3>;
trigger-external;
};
trigger@3 {
trigger-name = "continuous";
trigger-value = <0x6>;
};
};
mmc0: mmc@fff80000 {
compatible = "atmel,hsmci";
reg = <0xfff80000 0x600>;
interrupts = <11 4 0>;
dmas = <&dma 1 0>;
dma-names = "rxtx";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
mmc1: mmc@fffd0000 {
compatible = "atmel,hsmci";
reg = <0xfffd0000 0x600>;
interrupts = <29 4 0>;
dmas = <&dma 1 13>;
dma-names = "rxtx";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
watchdog@fffffd40 {
compatible = "atmel,at91sam9260-wdt";
reg = <0xfffffd40 0x10>;
status = "disabled";
};
spi0: spi@fffa4000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "atmel,at91rm9200-spi";
reg = <0xfffa4000 0x200>;
interrupts = <14 4 3>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_spi0>;
status = "disabled";
};
spi1: spi@fffa8000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "atmel,at91rm9200-spi";
reg = <0xfffa8000 0x200>;
interrupts = <15 4 3>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_spi1>;
status = "disabled";
};
};
nand0: nand@40000000 {
compatible = "atmel,at91rm9200-nand";
#address-cells = <1>;
#size-cells = <1>;
reg = <0x40000000 0x10000000
0xffffe200 0x200
>;
atmel,nand-addr-offset = <21>;
atmel,nand-cmd-offset = <22>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_nand>;
gpios = <&pioC 8 0
&pioC 14 0
0
>;
status = "disabled";
};
usb0: ohci@00700000 {
compatible = "atmel,at91rm9200-ohci", "usb-ohci";
reg = <0x00700000 0x100000>;
interrupts = <22 4 2>;
status = "disabled";
};
usb1: ehci@00800000 {
compatible = "atmel,at91sam9g45-ehci", "usb-ehci";
reg = <0x00800000 0x100000>;
interrupts = <22 4 2>;
status = "disabled";
};
};
i2c@0 {
compatible = "i2c-gpio";
gpios = <&pioA 20 0 /* sda */
&pioA 21 0 /* scl */
>;
i2c-gpio,sda-open-drain;
i2c-gpio,scl-open-drain;
i2c-gpio,delay-us = <5>; /* ~100 kHz */
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
};