1. 根目录:
2. drivers
3. staging
4. iio
5. accel
6. adis16220.h

#ifndef SPI_ADIS16220_H_
#define SPI_ADIS16220_H_

#define ADIS16220_STARTUP_DELAY	220 /* ms */

#define ADIS16220_READ_REG(a)    a
#define ADIS16220_WRITE_REG(a) ((a) | 0x80)

/* Flash memory write count */
#define ADIS16220_FLASH_CNT     0x00
/* Control, acceleration offset adjustment control */
#define ADIS16220_ACCL_NULL     0x02
/* Control, AIN1 offset adjustment control */
#define ADIS16220_AIN1_NULL     0x04
/* Control, AIN2 offset adjustment control */
#define ADIS16220_AIN2_NULL     0x06
/* Output, power supply during capture */
#define ADIS16220_CAPT_SUPPLY   0x0A
/* Output, temperature during capture */
#define ADIS16220_CAPT_TEMP     0x0C
/* Output, peak acceleration during capture */
#define ADIS16220_CAPT_PEAKA    0x0E
/* Output, peak AIN1 level during capture */
#define ADIS16220_CAPT_PEAK1    0x10
/* Output, peak AIN2 level during capture */
#define ADIS16220_CAPT_PEAK2    0x12
/* Output, capture buffer for acceleration */
#define ADIS16220_CAPT_BUFA     0x14
/* Output, capture buffer for AIN1 */
#define ADIS16220_CAPT_BUF1     0x16
/* Output, capture buffer for AIN2 */
#define ADIS16220_CAPT_BUF2     0x18
/* Control, capture buffer address pointer */
#define ADIS16220_CAPT_PNTR     0x1A
/* Control, capture control register */
#define ADIS16220_CAPT_CTRL     0x1C
/* Control, capture period (automatic mode) */
#define ADIS16220_CAPT_PRD      0x1E
/* Control, Alarm A, acceleration peak threshold */
#define ADIS16220_ALM_MAGA      0x20
/* Control, Alarm 1, AIN1 peak threshold */
#define ADIS16220_ALM_MAG1      0x22
/* Control, Alarm 2, AIN2 peak threshold */
#define ADIS16220_ALM_MAG2      0x24
/* Control, Alarm S, peak threshold */
#define ADIS16220_ALM_MAGS      0x26
/* Control, alarm configuration register */
#define ADIS16220_ALM_CTRL      0x28
/* Control, general I/O configuration */
#define ADIS16220_GPIO_CTRL     0x32
/* Control, self-test control, AIN configuration */
#define ADIS16220_MSC_CTRL      0x34
/* Control, digital I/O configuration */
#define ADIS16220_DIO_CTRL      0x36
/* Control, filter configuration */
#define ADIS16220_AVG_CNT       0x38
/* Status, system status */
#define ADIS16220_DIAG_STAT     0x3C
/* Control, system commands */
#define ADIS16220_GLOB_CMD      0x3E
/* Status, self-test response */
#define ADIS16220_ST_DELTA      0x40
/* Lot Identification Code 1 */
#define ADIS16220_LOT_ID1       0x52
/* Lot Identification Code 2 */
#define ADIS16220_LOT_ID2       0x54
/* Product identifier; convert to decimal = 16220 */
#define ADIS16220_PROD_ID       0x56
/* Serial number */
#define ADIS16220_SERIAL_NUM    0x58

#define ADIS16220_CAPTURE_SIZE  2048

/* MSC_CTRL */
#define ADIS16220_MSC_CTRL_SELF_TEST_EN	        (1 << 8)
#define ADIS16220_MSC_CTRL_POWER_SUP_COM_AIN1	(1 << 1)
#define ADIS16220_MSC_CTRL_POWER_SUP_COM_AIN2	(1 << 0)

/* DIO_CTRL */
#define ADIS16220_MSC_CTRL_DIO2_BUSY_IND     (3<<4)
#define ADIS16220_MSC_CTRL_DIO1_BUSY_IND     (3<<2)
#define ADIS16220_MSC_CTRL_DIO2_ACT_HIGH     (1<<1)
#define ADIS16220_MSC_CTRL_DIO1_ACT_HIGH     (1<<0)

/* DIAG_STAT */
/* AIN2 sample > ALM_MAG2 */
#define ADIS16220_DIAG_STAT_ALM_MAG2    (1<<14)
/* AIN1 sample > ALM_MAG1 */
#define ADIS16220_DIAG_STAT_ALM_MAG1    (1<<13)
/* Acceleration sample > ALM_MAGA */
#define ADIS16220_DIAG_STAT_ALM_MAGA    (1<<12)
/* Error condition programmed into ALM_MAGS[11:0] and ALM_CTRL[5:4] is true */
#define ADIS16220_DIAG_STAT_ALM_MAGS    (1<<11)
/* |Peak value in AIN2 data capture| > ALM_MAG2 */
#define ADIS16220_DIAG_STAT_PEAK_AIN2   (1<<10)
/* |Peak value in AIN1 data capture| > ALM_MAG1 */
#define ADIS16220_DIAG_STAT_PEAK_AIN1   (1<<9)
/* |Peak value in acceleration data capture| > ALM_MAGA */
#define ADIS16220_DIAG_STAT_PEAK_ACCEL  (1<<8)
/* Data ready, capture complete */
#define ADIS16220_DIAG_STAT_DATA_RDY    (1<<7)
#define ADIS16220_DIAG_STAT_FLASH_CHK	(1<<6)
#define ADIS16220_DIAG_STAT_SELF_TEST	(1<<5)
/* Capture period violation/interruption */
#define ADIS16220_DIAG_STAT_VIOLATION	(1<<4)
/* SPI communications failure */
#define ADIS16220_DIAG_STAT_SPI_FAIL	(1<<3)
/* Flash update failure */
#define ADIS16220_DIAG_STAT_FLASH_UPT	(1<<2)
/* Power supply above 3.625 V */
#define ADIS16220_DIAG_STAT_POWER_HIGH	(1<<1)
/* Power supply below 3.15 V */
#define ADIS16220_DIAG_STAT_POWER_LOW	(1<<0)

/* GLOB_CMD */
#define ADIS16220_GLOB_CMD_SW_RESET	(1<<7)
#define ADIS16220_GLOB_CMD_SELF_TEST	(1<<2)
#define ADIS16220_GLOB_CMD_PWR_DOWN	(1<<1)

#define ADIS16220_MAX_TX 2048
#define ADIS16220_MAX_RX 2048

#define ADIS16220_SPI_BURST	(u32)(1000 * 1000)
#define ADIS16220_SPI_FAST	(u32)(2000 * 1000)

/**
 * struct adis16220_state - device instance specific data
 * @us:			actual spi_device
 * @work_trigger_to_ring: bh for triggered event handling
 * @inter:		used to check if new interrupt has been triggered
 * @last_timestamp:	passing timestamp from th to bh of interrupt handler
 * @indio_dev:		industrial I/O device structure
 * @trig:		data ready trigger registered with iio
 * @tx:			transmit buffer
 * @rx:			receive buffer
 * @buf_lock:		mutex to protect tx and rx
 **/
struct adis16220_state {
	struct spi_device		*us;
	struct iio_dev			*indio_dev;
	u8				*tx;
	u8				*rx;
	struct mutex			buf_lock;
};

#endif /* SPI_ADIS16220_H_ */