# ALSA PCI drivers
menuconfig SND_PCI
bool "PCI sound devices"
depends on PCI
default y
help
Support for sound devices connected via the PCI bus.
if SND_PCI
config SND_AD1889
tristate "Analog Devices AD1889"
select SND_AC97_CODEC
help
Say Y here to include support for the integrated AC97 sound
device found in particular on the Hewlett-Packard [BCJ]-xxx0
class PA-RISC workstations, using the AD1819 codec.
To compile this as a module, choose M here: the module
will be called snd-ad1889.
config SND_ALS300
tristate "Avance Logic ALS300/ALS300+"
select SND_PCM
select SND_AC97_CODEC
select SND_OPL3_LIB
help
Say 'Y' or 'M' to include support for Avance Logic ALS300/ALS300+
To compile this driver as a module, choose M here: the module
will be called snd-als300
config SND_ALS4000
tristate "Avance Logic ALS4000"
depends on ISA_DMA_API
select SND_OPL3_LIB
select SND_MPU401_UART
select SND_PCM
select SND_SB_COMMON
help
Say Y here to include support for soundcards based on Avance Logic
ALS4000 chips.
To compile this driver as a module, choose M here: the module
will be called snd-als4000.
config SND_ALI5451
tristate "ALi M5451 PCI Audio Controller"
select SND_MPU401_UART
select SND_AC97_CODEC
help
Say Y here to include support for the integrated AC97 sound
device on motherboards using the ALi M5451 Audio Controller
(M1535/M1535D/M1535+/M1535D+ south bridges). Newer chipsets
use the "Intel/SiS/nVidia/AMD/ALi AC97 Controller" driver.
To compile this driver as a module, choose M here: the module
will be called snd-ali5451.
config SND_ASIHPI
tristate "AudioScience ASIxxxx"
depends on X86
select FW_LOADER
select SND_PCM
select SND_HWDEP
help
Say Y here to include support for AudioScience ASI sound cards.
To compile this driver as a module, choose M here: the module
will be called snd-asihpi.
config SND_ATIIXP
tristate "ATI IXP AC97 Controller"
select SND_AC97_CODEC
help
Say Y here to include support for the integrated AC97 sound
device on motherboards with ATI chipsets (ATI IXP 150/200/250/
300/400).
To compile this driver as a module, choose M here: the module
will be called snd-atiixp.
config SND_ATIIXP_MODEM
tristate "ATI IXP Modem"
select SND_AC97_CODEC
help
Say Y here to include support for the integrated MC97 modem on
motherboards with ATI chipsets (ATI IXP 150/200/250).
To compile this driver as a module, choose M here: the module
will be called snd-atiixp-modem.
config SND_AU8810
tristate "Aureal Advantage"
select SND_MPU401_UART
select SND_AC97_CODEC
help
Say Y here to include support for Aureal Advantage soundcards.
Supported features: Hardware Mixer, SRC, EQ and SPDIF output.
3D support code is in place, but not yet useable. For more info,
email the ALSA developer list, or <mjander@users.sourceforge.net>.
To compile this driver as a module, choose M here: the module
will be called snd-au8810.
config SND_AU8820
tristate "Aureal Vortex"
select SND_MPU401_UART
select SND_AC97_CODEC
help
Say Y here to include support for Aureal Vortex soundcards.
Supported features: Hardware Mixer and SRC. For more info, email
the ALSA developer list, or <mjander@users.sourceforge.net>.
To compile this driver as a module, choose M here: the module
will be called snd-au8820.
config SND_AU8830
tristate "Aureal Vortex 2"
select SND_MPU401_UART
select SND_AC97_CODEC
help
Say Y here to include support for Aureal Vortex 2 soundcards.
Supported features: Hardware Mixer, SRC, EQ and SPDIF output.
3D support code is in place, but not yet useable. For more info,
email the ALSA developer list, or <mjander@users.sourceforge.net>.
To compile this driver as a module, choose M here: the module
will be called snd-au8830.
config SND_AW2
tristate "Emagic Audiowerk 2"
help
Say Y here to include support for Emagic Audiowerk 2 soundcards.
Supported features: Analog and SPDIF output. Analog or SPDIF input.
Note: Switch between analog and digital input does not always work.
It can produce continuous noise. The workaround is to switch again
(and again) between digital and analog input until it works.
To compile this driver as a module, choose M here: the module
will be called snd-aw2.
config SND_AZT3328
tristate "Aztech AZF3328 / PCI168"
select SND_OPL3_LIB
select SND_MPU401_UART
select SND_PCM
select SND_RAWMIDI
select SND_AC97_CODEC
help
Say Y here to include support for Aztech AZF3328 (PCI168)
soundcards.
Supported features: AC97-"conformant" mixer, MPU401/OPL3, analog I/O
(16bit/8bit, many sample rates [<= 66.2kHz], NO hardware mixing),
Digital Enhanced Game Port, 1.024MHz multimedia sequencer timer,
ext. codec (I2S port), onboard amp (4W/4Ohms/ch), suspend/resume.
To compile this driver as a module, choose M here: the module
will be called snd-azt3328.
config SND_BT87X
tristate "Bt87x Audio Capture"
select SND_PCM
help
If you want to record audio from TV cards based on
Brooktree Bt878/Bt879 chips, say Y here and read
<file:Documentation/sound/alsa/Bt87x.txt>.
To compile this driver as a module, choose M here: the module
will be called snd-bt87x.
config SND_BT87X_OVERCLOCK
bool "Bt87x Audio overclocking"
depends on SND_BT87X
help
Say Y here if 448000 Hz isn't enough for you and you want to
record from the analog input with up to 1792000 Hz.
Higher sample rates won't hurt your hardware, but audio
quality may suffer.
config SND_CA0106
tristate "SB Audigy LS / Live 24bit"
select SND_AC97_CODEC
select SND_RAWMIDI
select SND_VMASTER
help
Say Y here to include support for the Sound Blaster Audigy LS
and Live 24bit.
To compile this driver as a module, choose M here: the module
will be called snd-ca0106.
config SND_CMIPCI
tristate "C-Media 8338, 8738, 8768, 8770"
select SND_OPL3_LIB
select SND_MPU401_UART
select SND_PCM
help
If you want to use soundcards based on C-Media CMI8338, CMI8738,
CMI8768 or CMI8770 chips, say Y here and read
<file:Documentation/sound/alsa/CMIPCI.txt>.
To compile this driver as a module, choose M here: the module
will be called snd-cmipci.
config SND_OXYGEN_LIB
tristate
config SND_OXYGEN
tristate "C-Media 8786, 8787, 8788 (Oxygen)"
select SND_OXYGEN_LIB
select SND_PCM
select SND_MPU401_UART
help
Say Y here to include support for sound cards based on the
C-Media CMI8788 (Oxygen HD Audio) chip:
* Asound A-8788
* Asus Xonar DG
* AuzenTech X-Meridian
* AuzenTech X-Meridian 2G
* Bgears b-Enspirer
* Club3D Theatron DTS
* HT-Omega Claro (plus)
* HT-Omega Claro halo (XT)
* Kuroutoshikou CMI8787-HG2PCI
* Razer Barracuda AC-1
* Sondigo Inferno
* TempoTec/MediaTek HiFier Fantasia
* TempoTec/MediaTek HiFier Serenade
To compile this driver as a module, choose M here: the module
will be called snd-oxygen.
config SND_CS4281
tristate "Cirrus Logic (Sound Fusion) CS4281"
select SND_OPL3_LIB
select SND_RAWMIDI
select SND_AC97_CODEC
help
Say Y here to include support for Cirrus Logic CS4281 chips.
To compile this driver as a module, choose M here: the module
will be called snd-cs4281.
config SND_CS46XX
tristate "Cirrus Logic (Sound Fusion) CS4280/CS461x/CS462x/CS463x"
select SND_RAWMIDI
select SND_AC97_CODEC
help
Say Y here to include support for Cirrus Logic CS4610/CS4612/
CS4614/CS4615/CS4622/CS4624/CS4630/CS4280 chips.
To compile this driver as a module, choose M here: the module
will be called snd-cs46xx.
config SND_CS46XX_NEW_DSP
bool "Cirrus Logic (Sound Fusion) New DSP support"
depends on SND_CS46XX
default y
help
Say Y here to use a new DSP image for SPDIF and dual codecs.
This works better than the old code, so say Y.
config SND_CS5530
tristate "CS5530 Audio"
depends on ISA_DMA_API
select SND_SB16_DSP
help
Say Y here to include support for audio on Cyrix/NatSemi CS5530 chips.
To compile this driver as a module, choose M here: the module
will be called snd-cs5530.
config SND_CS5535AUDIO
tristate "CS5535/CS5536 Audio"
select SND_PCM
select SND_AC97_CODEC
help
Say Y here to include support for audio on CS5535 chips. It is
referred to as NS CS5535 IO or AMD CS5535 IO companion in
various literature. This driver also supports the CS5536 audio
device. However, for both chips, on certain boards, you may
need to use ac97_quirk=hp_only if your board has physically
mapped headphone out to master output. If that works for you,
send lspci -vvv output to the mailing list so that your board
can be identified in the quirks list.
To compile this driver as a module, choose M here: the module
will be called snd-cs5535audio.
config SND_CTXFI
tristate "Creative Sound Blaster X-Fi"
select SND_PCM
help
If you want to use soundcards based on Creative Sound Blastr X-Fi
boards with 20k1 or 20k2 chips, say Y here.
To compile this driver as a module, choose M here: the module
will be called snd-ctxfi.
config SND_DARLA20
tristate "(Echoaudio) Darla20"
select FW_LOADER
select SND_PCM
help
Say 'Y' or 'M' to include support for Echoaudio Darla.
To compile this driver as a module, choose M here: the module
will be called snd-darla20
config SND_GINA20
tristate "(Echoaudio) Gina20"
select FW_LOADER
select SND_PCM
help
Say 'Y' or 'M' to include support for Echoaudio Gina.
To compile this driver as a module, choose M here: the module
will be called snd-gina20
config SND_LAYLA20
tristate "(Echoaudio) Layla20"
select FW_LOADER
select SND_RAWMIDI
select SND_PCM
help
Say 'Y' or 'M' to include support for Echoaudio Layla.
To compile this driver as a module, choose M here: the module
will be called snd-layla20
config SND_DARLA24
tristate "(Echoaudio) Darla24"
select FW_LOADER
select SND_PCM
help
Say 'Y' or 'M' to include support for Echoaudio Darla24.
To compile this driver as a module, choose M here: the module
will be called snd-darla24
config SND_GINA24
tristate "(Echoaudio) Gina24"
select FW_LOADER
select SND_PCM
help
Say 'Y' or 'M' to include support for Echoaudio Gina24.
To compile this driver as a module, choose M here: the module
will be called snd-gina24
config SND_LAYLA24
tristate "(Echoaudio) Layla24"
select FW_LOADER
select SND_RAWMIDI
select SND_PCM
help
Say 'Y' or 'M' to include support for Echoaudio Layla24.
To compile this driver as a module, choose M here: the module
will be called snd-layla24
config SND_MONA
tristate "(Echoaudio) Mona"
select FW_LOADER
select SND_RAWMIDI
select SND_PCM
help
Say 'Y' or 'M' to include support for Echoaudio Mona.
To compile this driver as a module, choose M here: the module
will be called snd-mona
config SND_MIA
tristate "(Echoaudio) Mia"
select FW_LOADER
select SND_RAWMIDI
select SND_PCM
help
Say 'Y' or 'M' to include support for Echoaudio Mia and Mia-midi.
To compile this driver as a module, choose M here: the module
will be called snd-mia
config SND_ECHO3G
tristate "(Echoaudio) 3G cards"
select FW_LOADER
select SND_RAWMIDI
select SND_PCM
help
Say 'Y' or 'M' to include support for Echoaudio Gina3G and Layla3G.
To compile this driver as a module, choose M here: the module
will be called snd-echo3g
config SND_INDIGO
tristate "(Echoaudio) Indigo"
select FW_LOADER
select SND_PCM
help
Say 'Y' or 'M' to include support for Echoaudio Indigo.
To compile this driver as a module, choose M here: the module
will be called snd-indigo
config SND_INDIGOIO
tristate "(Echoaudio) Indigo IO"
select FW_LOADER
select SND_PCM
help
Say 'Y' or 'M' to include support for Echoaudio Indigo IO.
To compile this driver as a module, choose M here: the module
will be called snd-indigoio
config SND_INDIGODJ
tristate "(Echoaudio) Indigo DJ"
select FW_LOADER
select SND_PCM
help
Say 'Y' or 'M' to include support for Echoaudio Indigo DJ.
To compile this driver as a module, choose M here: the module
will be called snd-indigodj
config SND_INDIGOIOX
tristate "(Echoaudio) Indigo IOx"
select FW_LOADER
select SND_PCM
help
Say 'Y' or 'M' to include support for Echoaudio Indigo IOx.
To compile this driver as a module, choose M here: the module
will be called snd-indigoiox
config SND_INDIGODJX
tristate "(Echoaudio) Indigo DJx"
select FW_LOADER
select SND_PCM
help
Say 'Y' or 'M' to include support for Echoaudio Indigo DJx.
To compile this driver as a module, choose M here: the module
will be called snd-indigodjx
config SND_EMU10K1
tristate "Emu10k1 (SB Live!, Audigy, E-mu APS)"
select FW_LOADER
select SND_HWDEP
select SND_RAWMIDI
select SND_AC97_CODEC
help
Say Y to include support for Sound Blaster PCI 512, Live!,
Audigy and E-mu APS (partially supported) soundcards.
The confusing multitude of mixer controls is documented in
<file:Documentation/sound/alsa/SB-Live-mixer.txt> and
<file:Documentation/sound/alsa/Audigy-mixer.txt>.
To compile this driver as a module, choose M here: the module
will be called snd-emu10k1.
config SND_EMU10K1X
tristate "Emu10k1X (Dell OEM Version)"
select SND_AC97_CODEC
select SND_RAWMIDI
help
Say Y here to include support for the Dell OEM version of the
Sound Blaster Live!.
To compile this driver as a module, choose M here: the module
will be called snd-emu10k1x.
config SND_ENS1370
tristate "(Creative) Ensoniq AudioPCI 1370"
select SND_RAWMIDI
select SND_PCM
help
Say Y here to include support for Ensoniq AudioPCI ES1370 chips.
To compile this driver as a module, choose M here: the module
will be called snd-ens1370.
config SND_ENS1371
tristate "(Creative) Ensoniq AudioPCI 1371/1373"
select SND_RAWMIDI
select SND_AC97_CODEC
help
Say Y here to include support for Ensoniq AudioPCI ES1371 chips and
Sound Blaster PCI 64 or 128 soundcards.
To compile this driver as a module, choose M here: the module
will be called snd-ens1371.
config SND_ES1938
tristate "ESS ES1938/1946/1969 (Solo-1)"
select SND_OPL3_LIB
select SND_MPU401_UART
select SND_AC97_CODEC
help
Say Y here to include support for soundcards based on ESS Solo-1
(ES1938, ES1946, ES1969) chips.
To compile this driver as a module, choose M here: the module
will be called snd-es1938.
config SND_ES1968
tristate "ESS ES1968/1978 (Maestro-1/2/2E)"
select SND_MPU401_UART
select SND_AC97_CODEC
help
Say Y here to include support for soundcards based on ESS Maestro
1/2/2E chips.
To compile this driver as a module, choose M here: the module
will be called snd-es1968.
config SND_ES1968_INPUT
bool "Enable input device for es1968 volume buttons"
depends on SND_ES1968
depends on INPUT=y || INPUT=SND_ES1968
help
If you say Y here, you will get an input device which reports
keypresses for the volume buttons connected to the es1968 chip.
If you say N the buttons will directly control the master volume.
It is recommended to say Y.
config SND_ES1968_RADIO
bool "Enable TEA5757 radio tuner support for es1968"
depends on SND_ES1968
depends on VIDEO_V4L2=y || VIDEO_V4L2=SND_ES1968
help
Say Y here to include support for TEA5757 radio tuner integrated on
some MediaForte cards (e.g. SF64-PCE2).
config SND_FM801
tristate "ForteMedia FM801"
select SND_OPL3_LIB
select SND_MPU401_UART
select SND_AC97_CODEC
help
Say Y here to include support for soundcards based on the ForteMedia
FM801 chip.
To compile this driver as a module, choose M here: the module
will be called snd-fm801.
config SND_FM801_TEA575X_BOOL
bool "ForteMedia FM801 + TEA5757 tuner"
depends on SND_FM801
depends on VIDEO_V4L2=y || VIDEO_V4L2=SND_FM801
help
Say Y here to include support for soundcards based on the ForteMedia
FM801 chip with a TEA5757 tuner (MediaForte SF256-PCS, SF256-PCP and
SF64-PCR) into the snd-fm801 driver.
config SND_TEA575X
tristate
depends on SND_FM801_TEA575X_BOOL || SND_ES1968_RADIO
default SND_FM801 || SND_ES1968
source "sound/pci/hda/Kconfig"
config SND_HDSP
tristate "RME Hammerfall DSP Audio"
select SND_HWDEP
select SND_RAWMIDI
select SND_PCM
help
Say Y here to include support for RME Hammerfall DSP Audio
soundcards.
To compile this driver as a module, choose M here: the module
will be called snd-hdsp.
comment "Don't forget to add built-in firmwares for HDSP driver"
depends on SND_HDSP=y
config SND_HDSPM
tristate "RME Hammerfall DSP MADI/RayDAT/AIO"
select SND_HWDEP
select SND_RAWMIDI
select SND_PCM
help
Say Y here to include support for RME Hammerfall DSP MADI,
RayDAT and AIO soundcards.
To compile this driver as a module, choose M here: the module
will be called snd-hdspm.
config SND_ICE1712
tristate "ICEnsemble ICE1712 (Envy24)"
select SND_MPU401_UART
select SND_AC97_CODEC
select BITREVERSE
help
Say Y here to include support for soundcards based on the
ICE1712 (Envy24) chip.
Currently supported hardware is: M-Audio Delta 1010(LT),
DiO 2496, 66, 44, 410, Audiophile 24/96; Digigram VX442;
TerraTec EWX 24/96, EWS 88MT/D, DMX 6Fire, Phase 88;
Hoontech SoundTrack DSP 24/Value/Media7.1; Event EZ8;
Lionstracs Mediastation, Terrasoniq TS 88.
To compile this driver as a module, choose M here: the module
will be called snd-ice1712.
config SND_ICE1724
tristate "ICE/VT1724/1720 (Envy24HT/PT)"
select SND_RAWMIDI
select SND_AC97_CODEC
select SND_VMASTER
help
Say Y here to include support for soundcards based on
ICE/VT1724/1720 (Envy24HT/PT) chips.
Currently supported hardware is: AMP AUDIO2000; M-Audio
Revolution 5.1, 7.1, Audiophile 192; TerraTec Aureon 5.1 Sky,
7.1 Space/Universe, Phase 22/28; Onkyo SE-90PCI, SE-200PCI;
AudioTrak Prodigy 192, 7.1 (HIFI/LT/XT), HD2; Hercules
Fortissimo IV; ESI Juli@; Pontis MS300; EGO-SYS WaveTerminal
192M; Albatron K8X800 Pro II; Chaintech ZNF3-150/250, 9CJS,
AV-710; Shuttle SN25P.
To compile this driver as a module, choose M here: the module
will be called snd-ice1724.
config SND_INTEL8X0
tristate "Intel/SiS/nVidia/AMD/ALi AC97 Controller"
select SND_AC97_CODEC
help
Say Y here to include support for the integrated AC97 sound
device on motherboards with Intel/SiS/nVidia/AMD chipsets, or
ALi chipsets using the M5455 Audio Controller. (There is a
separate driver for ALi M5451 Audio Controllers.)
To compile this driver as a module, choose M here: the module
will be called snd-intel8x0.
config SND_INTEL8X0M
tristate "Intel/SiS/nVidia/AMD MC97 Modem"
select SND_AC97_CODEC
help
Say Y here to include support for the integrated MC97 modem on
motherboards with Intel/SiS/nVidia/AMD chipsets.
To compile this driver as a module, choose M here: the module
will be called snd-intel8x0m.
config SND_KORG1212
tristate "Korg 1212 IO"
select SND_PCM
help
Say Y here to include support for Korg 1212IO soundcards.
To compile this driver as a module, choose M here: the module
will be called snd-korg1212.
config SND_LOLA
tristate "Digigram Lola"
select SND_PCM
help
Say Y to include support for Digigram Lola boards.
To compile this driver as a module, choose M here: the module
will be called snd-lola.
config SND_LX6464ES
tristate "Digigram LX6464ES"
select SND_PCM
help
Say Y here to include support for Digigram LX6464ES boards.
To compile this driver as a module, choose M here: the module
will be called snd-lx6464es.
config SND_MAESTRO3
tristate "ESS Allegro/Maestro3"
select SND_AC97_CODEC
help
Say Y here to include support for soundcards based on ESS Maestro 3
(Allegro) chips.
To compile this driver as a module, choose M here: the module
will be called snd-maestro3.
config SND_MAESTRO3_INPUT
bool "Enable input device for maestro3 volume buttons"
depends on SND_MAESTRO3
depends on INPUT=y || INPUT=SND_MAESTRO3
help
If you say Y here, you will get an input device which reports
keypresses for the volume buttons connected to the maestro3 chip.
If you say N the buttons will directly control the master volume.
It is recommended to say Y.
config SND_MIXART
tristate "Digigram miXart"
select SND_HWDEP
select SND_PCM
help
If you want to use Digigram miXart soundcards, say Y here and
read <file:Documentation/sound/alsa/MIXART.txt>.
To compile this driver as a module, choose M here: the module
will be called snd-mixart.
config SND_NM256
tristate "NeoMagic NM256AV/ZX"
select SND_AC97_CODEC
help
Say Y here to include support for NeoMagic NM256AV/ZX chips.
To compile this driver as a module, choose M here: the module
will be called snd-nm256.
config SND_PCXHR
tristate "Digigram PCXHR"
select SND_PCM
select SND_HWDEP
help
Say Y here to include support for Digigram PCXHR boards.
To compile this driver as a module, choose M here: the module
will be called snd-pcxhr.
config SND_RIPTIDE
tristate "Conexant Riptide"
select FW_LOADER
select SND_OPL3_LIB
select SND_MPU401_UART
select SND_AC97_CODEC
help
Say 'Y' or 'M' to include support for Conexant Riptide chip.
To compile this driver as a module, choose M here: the module
will be called snd-riptide
config SND_RME32
tristate "RME Digi32, 32/8, 32 PRO"
select SND_PCM
help
Say Y to include support for RME Digi32, Digi32 PRO and
Digi32/8 (Sek'd Prodif32, Prodif96 and Prodif Gold) audio
devices.
To compile this driver as a module, choose M here: the module
will be called snd-rme32.
config SND_RME96
tristate "RME Digi96, 96/8, 96/8 PRO"
select SND_PCM
help
Say Y here to include support for RME Digi96, Digi96/8 and
Digi96/8 PRO/PAD/PST soundcards.
To compile this driver as a module, choose M here: the module
will be called snd-rme96.
config SND_RME9652
tristate "RME Digi9652 (Hammerfall)"
select SND_PCM
help
Say Y here to include support for RME Hammerfall (RME
Digi9652/Digi9636) soundcards.
To compile this driver as a module, choose M here: the module
will be called snd-rme9652.
config SND_SIS7019
tristate "SiS 7019 Audio Accelerator"
depends on X86 && !X86_64
select SND_AC97_CODEC
help
Say Y here to include support for the SiS 7019 Audio Accelerator.
To compile this driver as a module, choose M here: the module
will be called snd-sis7019.
config SND_SONICVIBES
tristate "S3 SonicVibes"
select SND_OPL3_LIB
select SND_MPU401_UART
select SND_AC97_CODEC
help
Say Y here to include support for soundcards based on the S3
SonicVibes chip.
To compile this driver as a module, choose M here: the module
will be called snd-sonicvibes.
config SND_TRIDENT
tristate "Trident 4D-Wave DX/NX; SiS 7018"
select SND_MPU401_UART
select SND_AC97_CODEC
help
Say Y here to include support for soundcards based on Trident
4D-Wave DX/NX or SiS 7018 chips.
To compile this driver as a module, choose M here: the module
will be called snd-trident.
config SND_VIA82XX
tristate "VIA 82C686A/B, 8233/8235 AC97 Controller"
select SND_MPU401_UART
select SND_AC97_CODEC
help
Say Y here to include support for the integrated AC97 sound
device on motherboards with VIA chipsets.
To compile this driver as a module, choose M here: the module
will be called snd-via82xx.
config SND_VIA82XX_MODEM
tristate "VIA 82C686A/B, 8233 based Modems"
select SND_AC97_CODEC
help
Say Y here to include support for the integrated MC97 modem on
motherboards with VIA chipsets.
To compile this driver as a module, choose M here: the module
will be called snd-via82xx-modem.
config SND_VIRTUOSO
tristate "Asus Virtuoso 66/100/200 (Xonar)"
select SND_OXYGEN_LIB
select SND_PCM
select SND_MPU401_UART
select SND_JACK if INPUT=y || INPUT=SND
help
Say Y here to include support for sound cards based on the
Asus AV66/AV100/AV200 chips, i.e., Xonar D1, DX, D2, D2X, DS,
Essence ST (Deluxe), and Essence STX.
Support for the HDAV1.3 (Deluxe) and HDAV1.3 Slim is experimental;
for the Xense, missing.
To compile this driver as a module, choose M here: the module
will be called snd-virtuoso.
config SND_VX222
tristate "Digigram VX222"
select SND_VX_LIB
help
Say Y here to include support for Digigram VX222 soundcards.
To compile this driver as a module, choose M here: the module
will be called snd-vx222.
config SND_YMFPCI
tristate "Yamaha YMF724/740/744/754"
select SND_OPL3_LIB
select SND_MPU401_UART
select SND_AC97_CODEC
help
Say Y here to include support for Yamaha PCI audio chips -
YMF724, YMF724F, YMF740, YMF740C, YMF744, YMF754.
To compile this driver as a module, choose M here: the module
will be called snd-ymfpci.
endif # SND_PCI