/*
* dvb_ca.c: generic DVB functions for EN50221 CAM interfaces
*
* Copyright (C) 2004 Andrew de Quincey
*
* Parts of this file were based on sources as follows:
*
* Copyright (C) 2003 Ralph Metzler <rjkm@metzlerbros.de>
*
* based on code:
*
* Copyright (C) 1999-2002 Ralph Metzler
* & Marcus Metzler for convergence integrated media GmbH
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2
* of the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
* Or, point your browser to http://www.gnu.org/copyleft/gpl.html
*/
#include <linux/errno.h>
#include <linux/slab.h>
#include <linux/list.h>
#include <linux/module.h>
#include <linux/vmalloc.h>
#include <linux/delay.h>
#include <linux/spinlock.h>
#include <linux/sched.h>
#include <linux/kthread.h>
#include "dvb_ca_en50221.h"
#include "dvb_ringbuffer.h"
static int dvb_ca_en50221_debug;
module_param_named(cam_debug, dvb_ca_en50221_debug, int, 0644);
MODULE_PARM_DESC(cam_debug, "enable verbose debug messages");
#define dprintk if (dvb_ca_en50221_debug) printk
#define INIT_TIMEOUT_SECS 10
#define HOST_LINK_BUF_SIZE 0x200
#define RX_BUFFER_SIZE 65535
#define MAX_RX_PACKETS_PER_ITERATION 10
#define CTRLIF_DATA 0
#define CTRLIF_COMMAND 1
#define CTRLIF_STATUS 1
#define CTRLIF_SIZE_LOW 2
#define CTRLIF_SIZE_HIGH 3
#define CMDREG_HC 1 /* Host control */
#define CMDREG_SW 2 /* Size write */
#define CMDREG_SR 4 /* Size read */
#define CMDREG_RS 8 /* Reset interface */
#define CMDREG_FRIE 0x40 /* Enable FR interrupt */
#define CMDREG_DAIE 0x80 /* Enable DA interrupt */
#define IRQEN (CMDREG_DAIE)
#define STATUSREG_RE 1 /* read error */
#define STATUSREG_WE 2 /* write error */
#define STATUSREG_FR 0x40 /* module free */
#define STATUSREG_DA 0x80 /* data available */
#define STATUSREG_TXERR (STATUSREG_RE|STATUSREG_WE) /* general transfer error */
#define DVB_CA_SLOTSTATE_NONE 0
#define DVB_CA_SLOTSTATE_UNINITIALISED 1
#define DVB_CA_SLOTSTATE_RUNNING 2
#define DVB_CA_SLOTSTATE_INVALID 3
#define DVB_CA_SLOTSTATE_WAITREADY 4
#define DVB_CA_SLOTSTATE_VALIDATE 5
#define DVB_CA_SLOTSTATE_WAITFR 6
#define DVB_CA_SLOTSTATE_LINKINIT 7
/* Information on a CA slot */
struct dvb_ca_slot {
/* current state of the CAM */
int slot_state;
/* mutex used for serializing access to one CI slot */
struct mutex slot_lock;
/* Number of CAMCHANGES that have occurred since last processing */
atomic_t camchange_count;
/* Type of last CAMCHANGE */
int camchange_type;
/* base address of CAM config */
u32 config_base;
/* value to write into Config Control register */
u8 config_option;
/* if 1, the CAM supports DA IRQs */
u8 da_irq_supported:1;
/* size of the buffer to use when talking to the CAM */
int link_buf_size;
/* buffer for incoming packets */
struct dvb_ringbuffer rx_buffer;
/* timer used during various states of the slot */
unsigned long timeout;
};
/* Private CA-interface information */
struct dvb_ca_private {
/* pointer back to the public data structure */
struct dvb_ca_en50221 *pub;
/* the DVB device */
struct dvb_device *dvbdev;
/* Flags describing the interface (DVB_CA_FLAG_*) */
u32 flags;
/* number of slots supported by this CA interface */
unsigned int slot_count;
/* information on each slot */
struct dvb_ca_slot *slot_info;
/* wait queues for read() and write() operations */
wait_queue_head_t wait_queue;
/* PID of the monitoring thread */
struct task_struct *thread;
/* Flag indicating if the CA device is open */
unsigned int open:1;
/* Flag indicating the thread should wake up now */
unsigned int wakeup:1;
/* Delay the main thread should use */
unsigned long delay;
/* Slot to start looking for data to read from in the next user-space read operation */
int next_read_slot;
};
static void dvb_ca_en50221_thread_wakeup(struct dvb_ca_private *ca);
static int dvb_ca_en50221_read_data(struct dvb_ca_private *ca, int slot, u8 * ebuf, int ecount);
static int dvb_ca_en50221_write_data(struct dvb_ca_private *ca, int slot, u8 * ebuf, int ecount);
/**
* Safely find needle in haystack.
*
* @param haystack Buffer to look in.
* @param hlen Number of bytes in haystack.
* @param needle Buffer to find.
* @param nlen Number of bytes in needle.
* @return Pointer into haystack needle was found at, or NULL if not found.
*/
static char *findstr(char * haystack, int hlen, char * needle, int nlen)
{
int i;
if (hlen < nlen)
return NULL;
for (i = 0; i <= hlen - nlen; i++) {
if (!strncmp(haystack + i, needle, nlen))
return haystack + i;
}
return NULL;
}
/* ******************************************************************************** */
/* EN50221 physical interface functions */
/**
* Check CAM status.
*/
static int dvb_ca_en50221_check_camstatus(struct dvb_ca_private *ca, int slot)
{
int slot_status;
int cam_present_now;
int cam_changed;
/* IRQ mode */
if (ca->flags & DVB_CA_EN50221_FLAG_IRQ_CAMCHANGE) {
return (atomic_read(&ca->slot_info[slot].camchange_count) != 0);
}
/* poll mode */
slot_status = ca->pub->poll_slot_status(ca->pub, slot, ca->open);
cam_present_now = (slot_status & DVB_CA_EN50221_POLL_CAM_PRESENT) ? 1 : 0;
cam_changed = (slot_status & DVB_CA_EN50221_POLL_CAM_CHANGED) ? 1 : 0;
if (!cam_changed) {
int cam_present_old = (ca->slot_info[slot].slot_state != DVB_CA_SLOTSTATE_NONE);
cam_changed = (cam_present_now != cam_present_old);
}
if (cam_changed) {
if (!cam_present_now) {
ca->slot_info[slot].camchange_type = DVB_CA_EN50221_CAMCHANGE_REMOVED;
} else {
ca->slot_info[slot].camchange_type = DVB_CA_EN50221_CAMCHANGE_INSERTED;
}
atomic_set(&ca->slot_info[slot].camchange_count, 1);
} else {
if ((ca->slot_info[slot].slot_state == DVB_CA_SLOTSTATE_WAITREADY) &&
(slot_status & DVB_CA_EN50221_POLL_CAM_READY)) {
// move to validate state if reset is completed
ca->slot_info[slot].slot_state = DVB_CA_SLOTSTATE_VALIDATE;
}
}
return cam_changed;
}
/**
* Wait for flags to become set on the STATUS register on a CAM interface,
* checking for errors and timeout.
*
* @param ca CA instance.
* @param slot Slot on interface.
* @param waitfor Flags to wait for.
* @param timeout_ms Timeout in milliseconds.
*
* @return 0 on success, nonzero on error.
*/
static int dvb_ca_en50221_wait_if_status(struct dvb_ca_private *ca, int slot,
u8 waitfor, int timeout_hz)
{
unsigned long timeout;
unsigned long start;
dprintk("%s\n", __func__);
/* loop until timeout elapsed */
start = jiffies;
timeout = jiffies + timeout_hz;
while (1) {
/* read the status and check for error */
int res = ca->pub->read_cam_control(ca->pub, slot, CTRLIF_STATUS);
if (res < 0)
return -EIO;
/* if we got the flags, it was successful! */
if (res & waitfor) {
dprintk("%s succeeded timeout:%lu\n", __func__, jiffies - start);
return 0;
}
/* check for timeout */
if (time_after(jiffies, timeout)) {
break;
}
/* wait for a bit */
msleep(1);
}
dprintk("%s failed timeout:%lu\n", __func__, jiffies - start);
/* if we get here, we've timed out */
return -ETIMEDOUT;
}
/**
* Initialise the link layer connection to a CAM.
*
* @param ca CA instance.
* @param slot Slot id.
*
* @return 0 on success, nonzero on failure.
*/
static int dvb_ca_en50221_link_init(struct dvb_ca_private *ca, int slot)
{
int ret;
int buf_size;
u8 buf[2];
dprintk("%s\n", __func__);
/* we'll be determining these during this function */
ca->slot_info[slot].da_irq_supported = 0;
/* set the host link buffer size temporarily. it will be overwritten with the
* real negotiated size later. */
ca->slot_info[slot].link_buf_size = 2;
/* read the buffer size from the CAM */
if ((ret = ca->pub->write_cam_control(ca->pub, slot, CTRLIF_COMMAND, IRQEN | CMDREG_SR)) != 0)
return ret;
if ((ret = dvb_ca_en50221_wait_if_status(ca, slot, STATUSREG_DA, HZ / 10)) != 0)
return ret;
if ((ret = dvb_ca_en50221_read_data(ca, slot, buf, 2)) != 2)
return -EIO;
if ((ret = ca->pub->write_cam_control(ca->pub, slot, CTRLIF_COMMAND, IRQEN)) != 0)
return ret;
/* store it, and choose the minimum of our buffer and the CAM's buffer size */
buf_size = (buf[0] << 8) | buf[1];
if (buf_size > HOST_LINK_BUF_SIZE)
buf_size = HOST_LINK_BUF_SIZE;
ca->slot_info[slot].link_buf_size = buf_size;
buf[0] = buf_size >> 8;
buf[1] = buf_size & 0xff;
dprintk("Chosen link buffer size of %i\n", buf_size);
/* write the buffer size to the CAM */
if ((ret = ca->pub->write_cam_control(ca->pub, slot, CTRLIF_COMMAND, IRQEN | CMDREG_SW)) != 0)
return ret;
if ((ret = dvb_ca_en50221_wait_if_status(ca, slot, STATUSREG_FR, HZ / 10)) != 0)
return ret;
if ((ret = dvb_ca_en50221_write_data(ca, slot, buf, 2)) != 2)
return -EIO;
if ((ret = ca->pub->write_cam_control(ca->pub, slot, CTRLIF_COMMAND, IRQEN)) != 0)
return ret;
/* success */
return 0;
}
/**
* Read a tuple from attribute memory.
*
* @param ca CA instance.
* @param slot Slot id.
* @param address Address to read from. Updated.
* @param tupleType Tuple id byte. Updated.
* @param tupleLength Tuple length. Updated.
* @param tuple Dest buffer for tuple (must be 256 bytes). Updated.
*
* @return 0 on success, nonzero on error.
*/
static int dvb_ca_en50221_read_tuple(struct dvb_ca_private *ca, int slot,
int *address, int *tupleType, int *tupleLength, u8 * tuple)
{
int i;
int _tupleType;
int _tupleLength;
int _address = *address;
/* grab the next tuple length and type */
if ((_tupleType = ca->pub->read_attribute_mem(ca->pub, slot, _address)) < 0)
return _tupleType;
if (_tupleType == 0xff) {
dprintk("END OF CHAIN TUPLE type:0x%x\n", _tupleType);
*address += 2;
*tupleType = _tupleType;
*tupleLength = 0;
return 0;
}
if ((_tupleLength = ca->pub->read_attribute_mem(ca->pub, slot, _address + 2)) < 0)
return _tupleLength;
_address += 4;
dprintk("TUPLE type:0x%x length:%i\n", _tupleType, _tupleLength);
/* read in the whole tuple */
for (i = 0; i < _tupleLength; i++) {
tuple[i] = ca->pub->read_attribute_mem(ca->pub, slot, _address + (i * 2));
dprintk(" 0x%02x: 0x%02x %c\n",
i, tuple[i] & 0xff,
((tuple[i] > 31) && (tuple[i] < 127)) ? tuple[i] : '.');
}
_address += (_tupleLength * 2);
// success
*tupleType = _tupleType;
*tupleLength = _tupleLength;
*address = _address;
return 0;
}
/**
* Parse attribute memory of a CAM module, extracting Config register, and checking
* it is a DVB CAM module.
*
* @param ca CA instance.
* @param slot Slot id.
*
* @return 0 on success, <0 on failure.
*/
static int dvb_ca_en50221_parse_attributes(struct dvb_ca_private *ca, int slot)
{
int address = 0;
int tupleLength;
int tupleType;
u8 tuple[257];
char *dvb_str;
int rasz;
int status;
int got_cftableentry = 0;
int end_chain = 0;
int i;
u16 manfid = 0;
u16 devid = 0;
// CISTPL_DEVICE_0A
if ((status =
dvb_ca_en50221_read_tuple(ca, slot, &address, &tupleType, &tupleLength, tuple)) < 0)
return status;
if (tupleType != 0x1D)
return -EINVAL;
// CISTPL_DEVICE_0C
if ((status =
dvb_ca_en50221_read_tuple(ca, slot, &address, &tupleType, &tupleLength, tuple)) < 0)
return status;
if (tupleType != 0x1C)
return -EINVAL;
// CISTPL_VERS_1
if ((status =
dvb_ca_en50221_read_tuple(ca, slot, &address, &tupleType, &tupleLength, tuple)) < 0)
return status;
if (tupleType != 0x15)
return -EINVAL;
// CISTPL_MANFID
if ((status = dvb_ca_en50221_read_tuple(ca, slot, &address, &tupleType,
&tupleLength, tuple)) < 0)
return status;
if (tupleType != 0x20)
return -EINVAL;
if (tupleLength != 4)
return -EINVAL;
manfid = (tuple[1] << 8) | tuple[0];
devid = (tuple[3] << 8) | tuple[2];
// CISTPL_CONFIG
if ((status = dvb_ca_en50221_read_tuple(ca, slot, &address, &tupleType,
&tupleLength, tuple)) < 0)
return status;
if (tupleType != 0x1A)
return -EINVAL;
if (tupleLength < 3)
return -EINVAL;
/* extract the configbase */
rasz = tuple[0] & 3;
if (tupleLength < (3 + rasz + 14))
return -EINVAL;
ca->slot_info[slot].config_base = 0;
for (i = 0; i < rasz + 1; i++) {
ca->slot_info[slot].config_base |= (tuple[2 + i] << (8 * i));
}
/* check it contains the correct DVB string */
dvb_str = findstr((char *)tuple, tupleLength, "DVB_CI_V", 8);
if (dvb_str == NULL)
return -EINVAL;
if (tupleLength < ((dvb_str - (char *) tuple) + 12))
return -EINVAL;
/* is it a version we support? */
if (strncmp(dvb_str + 8, "1.00", 4)) {
printk("dvb_ca adapter %d: Unsupported DVB CAM module version %c%c%c%c\n",
ca->dvbdev->adapter->num, dvb_str[8], dvb_str[9], dvb_str[10], dvb_str[11]);
return -EINVAL;
}
/* process the CFTABLE_ENTRY tuples, and any after those */
while ((!end_chain) && (address < 0x1000)) {
if ((status = dvb_ca_en50221_read_tuple(ca, slot, &address, &tupleType,
&tupleLength, tuple)) < 0)
return status;
switch (tupleType) {
case 0x1B: // CISTPL_CFTABLE_ENTRY
if (tupleLength < (2 + 11 + 17))
break;
/* if we've already parsed one, just use it */
if (got_cftableentry)
break;
/* get the config option */
ca->slot_info[slot].config_option = tuple[0] & 0x3f;
/* OK, check it contains the correct strings */
if ((findstr((char *)tuple, tupleLength, "DVB_HOST", 8) == NULL) ||
(findstr((char *)tuple, tupleLength, "DVB_CI_MODULE", 13) == NULL))
break;
got_cftableentry = 1;
break;
case 0x14: // CISTPL_NO_LINK
break;
case 0xFF: // CISTPL_END
end_chain = 1;
break;
default: /* Unknown tuple type - just skip this tuple and move to the next one */
dprintk("dvb_ca: Skipping unknown tuple type:0x%x length:0x%x\n", tupleType,
tupleLength);
break;
}
}
if ((address > 0x1000) || (!got_cftableentry))
return -EINVAL;
dprintk("Valid DVB CAM detected MANID:%x DEVID:%x CONFIGBASE:0x%x CONFIGOPTION:0x%x\n",
manfid, devid, ca->slot_info[slot].config_base, ca->slot_info[slot].config_option);
// success!
return 0;
}
/**
* Set CAM's configoption correctly.
*
* @param ca CA instance.
* @param slot Slot containing the CAM.
*/
static int dvb_ca_en50221_set_configoption(struct dvb_ca_private *ca, int slot)
{
int configoption;
dprintk("%s\n", __func__);
/* set the config option */
ca->pub->write_attribute_mem(ca->pub, slot,
ca->slot_info[slot].config_base,
ca->slot_info[slot].config_option);
/* check it */
configoption = ca->pub->read_attribute_mem(ca->pub, slot, ca->slot_info[slot].config_base);
dprintk("Set configoption 0x%x, read configoption 0x%x\n",
ca->slot_info[slot].config_option, configoption & 0x3f);
/* fine! */
return 0;
}
/**
* This function talks to an EN50221 CAM control interface. It reads a buffer of
* data from the CAM. The data can either be stored in a supplied buffer, or
* automatically be added to the slot's rx_buffer.
*
* @param ca CA instance.
* @param slot Slot to read from.
* @param ebuf If non-NULL, the data will be written to this buffer. If NULL,
* the data will be added into the buffering system as a normal fragment.
* @param ecount Size of ebuf. Ignored if ebuf is NULL.
*
* @return Number of bytes read, or < 0 on error
*/
static int dvb_ca_en50221_read_data(struct dvb_ca_private *ca, int slot, u8 * ebuf, int ecount)
{
int bytes_read;
int status;
u8 buf[HOST_LINK_BUF_SIZE];
int i;
dprintk("%s\n", __func__);
/* check if we have space for a link buf in the rx_buffer */
if (ebuf == NULL) {
int buf_free;
if (ca->slot_info[slot].rx_buffer.data == NULL) {
status = -EIO;
goto exit;
}
buf_free = dvb_ringbuffer_free(&ca->slot_info[slot].rx_buffer);
if (buf_free < (ca->slot_info[slot].link_buf_size + DVB_RINGBUFFER_PKTHDRSIZE)) {
status = -EAGAIN;
goto exit;
}
}
/* check if there is data available */
if ((status = ca->pub->read_cam_control(ca->pub, slot, CTRLIF_STATUS)) < 0)
goto exit;
if (!(status & STATUSREG_DA)) {
/* no data */
status = 0;
goto exit;
}
/* read the amount of data */
if ((status = ca->pub->read_cam_control(ca->pub, slot, CTRLIF_SIZE_HIGH)) < 0)
goto exit;
bytes_read = status << 8;
if ((status = ca->pub->read_cam_control(ca->pub, slot, CTRLIF_SIZE_LOW)) < 0)
goto exit;
bytes_read |= status;
/* check it will fit */
if (ebuf == NULL) {
if (bytes_read > ca->slot_info[slot].link_buf_size) {
printk("dvb_ca adapter %d: CAM tried to send a buffer larger than the link buffer size (%i > %i)!\n",
ca->dvbdev->adapter->num, bytes_read, ca->slot_info[slot].link_buf_size);
ca->slot_info[slot].slot_state = DVB_CA_SLOTSTATE_LINKINIT;
status = -EIO;
goto exit;
}
if (bytes_read < 2) {
printk("dvb_ca adapter %d: CAM sent a buffer that was less than 2 bytes!\n",
ca->dvbdev->adapter->num);
ca->slot_info[slot].slot_state = DVB_CA_SLOTSTATE_LINKINIT;
status = -EIO;
goto exit;
}
} else {
if (bytes_read > ecount) {
printk("dvb_ca adapter %d: CAM tried to send a buffer larger than the ecount size!\n",
ca->dvbdev->adapter->num);
status = -EIO;
goto exit;
}
}
/* fill the buffer */
for (i = 0; i < bytes_read; i++) {
/* read byte and check */
if ((status = ca->pub->read_cam_control(ca->pub, slot, CTRLIF_DATA)) < 0)
goto exit;
/* OK, store it in the buffer */
buf[i] = status;
}
/* check for read error (RE should now be 0) */
if ((status = ca->pub->read_cam_control(ca->pub, slot, CTRLIF_STATUS)) < 0)
goto exit;
if (status & STATUSREG_RE) {
ca->slot_info[slot].slot_state = DVB_CA_SLOTSTATE_LINKINIT;
status = -EIO;
goto exit;
}
/* OK, add it to the receive buffer, or copy into external buffer if supplied */
if (ebuf == NULL) {
if (ca->slot_info[slot].rx_buffer.data == NULL) {
status = -EIO;
goto exit;
}
dvb_ringbuffer_pkt_write(&ca->slot_info[slot].rx_buffer, buf, bytes_read);
} else {
memcpy(ebuf, buf, bytes_read);
}
dprintk("Received CA packet for slot %i connection id 0x%x last_frag:%i size:0x%x\n", slot,
buf[0], (buf[1] & 0x80) == 0, bytes_read);
/* wake up readers when a last_fragment is received */
if ((buf[1] & 0x80) == 0x00) {
wake_up_interruptible(&ca->wait_queue);
}
status = bytes_read;
exit:
return status;
}
/**
* This function talks to an EN50221 CAM control interface. It writes a buffer of data
* to a CAM.
*
* @param ca CA instance.
* @param slot Slot to write to.
* @param ebuf The data in this buffer is treated as a complete link-level packet to
* be written.
* @param count Size of ebuf.
*
* @return Number of bytes written, or < 0 on error.
*/
static int dvb_ca_en50221_write_data(struct dvb_ca_private *ca, int slot, u8 * buf, int bytes_write)
{
int status;
int i;
dprintk("%s\n", __func__);
/* sanity check */
if (bytes_write > ca->slot_info[slot].link_buf_size)
return -EINVAL;
/* it is possible we are dealing with a single buffer implementation,
thus if there is data available for read or if there is even a read
already in progress, we do nothing but awake the kernel thread to
process the data if necessary. */
if ((status = ca->pub->read_cam_control(ca->pub, slot, CTRLIF_STATUS)) < 0)
goto exitnowrite;
if (status & (STATUSREG_DA | STATUSREG_RE)) {
if (status & STATUSREG_DA)
dvb_ca_en50221_thread_wakeup(ca);
status = -EAGAIN;
goto exitnowrite;
}
/* OK, set HC bit */
if ((status = ca->pub->write_cam_control(ca->pub, slot, CTRLIF_COMMAND,
IRQEN | CMDREG_HC)) != 0)
goto exit;
/* check if interface is still free */
if ((status = ca->pub->read_cam_control(ca->pub, slot, CTRLIF_STATUS)) < 0)
goto exit;
if (!(status & STATUSREG_FR)) {
/* it wasn't free => try again later */
status = -EAGAIN;
goto exit;
}
/* send the amount of data */
if ((status = ca->pub->write_cam_control(ca->pub, slot, CTRLIF_SIZE_HIGH, bytes_write >> 8)) != 0)
goto exit;
if ((status = ca->pub->write_cam_control(ca->pub, slot, CTRLIF_SIZE_LOW,
bytes_write & 0xff)) != 0)
goto exit;
/* send the buffer */
for (i = 0; i < bytes_write; i++) {
if ((status = ca->pub->write_cam_control(ca->pub, slot, CTRLIF_DATA, buf[i])) != 0)
goto exit;
}
/* check for write error (WE should now be 0) */
if ((status = ca->pub->read_cam_control(ca->pub, slot, CTRLIF_STATUS)) < 0)
goto exit;
if (status & STATUSREG_WE) {
ca->slot_info[slot].slot_state = DVB_CA_SLOTSTATE_LINKINIT;
status = -EIO;
goto exit;
}
status = bytes_write;
dprintk("Wrote CA packet for slot %i, connection id 0x%x last_frag:%i size:0x%x\n", slot,
buf[0], (buf[1] & 0x80) == 0, bytes_write);
exit:
ca->pub->write_cam_control(ca->pub, slot, CTRLIF_COMMAND, IRQEN);
exitnowrite:
return status;
}
EXPORT_SYMBOL(dvb_ca_en50221_camchange_irq);
/* ******************************************************************************** */
/* EN50221 higher level functions */
/**
* A CAM has been removed => shut it down.
*
* @param ca CA instance.
* @param slot Slot to shut down.
*/
static int dvb_ca_en50221_slot_shutdown(struct dvb_ca_private *ca, int slot)
{
dprintk("%s\n", __func__);
ca->pub->slot_shutdown(ca->pub, slot);
ca->slot_info[slot].slot_state = DVB_CA_SLOTSTATE_NONE;
/* need to wake up all processes to check if they're now
trying to write to a defunct CAM */
wake_up_interruptible(&ca->wait_queue);
dprintk("Slot %i shutdown\n", slot);
/* success */
return 0;
}
EXPORT_SYMBOL(dvb_ca_en50221_camready_irq);
/**
* A CAMCHANGE IRQ has occurred.
*
* @param ca CA instance.
* @param slot Slot concerned.
* @param change_type One of the DVB_CA_CAMCHANGE_* values.
*/
void dvb_ca_en50221_camchange_irq(struct dvb_ca_en50221 *pubca, int slot, int change_type)
{
struct dvb_ca_private *ca = pubca->private;
dprintk("CAMCHANGE IRQ slot:%i change_type:%i\n", slot, change_type);
switch (change_type) {
case DVB_CA_EN50221_CAMCHANGE_REMOVED:
case DVB_CA_EN50221_CAMCHANGE_INSERTED:
break;
default:
return;
}
ca->slot_info[slot].camchange_type = change_type;
atomic_inc(&ca->slot_info[slot].camchange_count);
dvb_ca_en50221_thread_wakeup(ca);
}
EXPORT_SYMBOL(dvb_ca_en50221_frda_irq);
/**
* A CAMREADY IRQ has occurred.
*
* @param ca CA instance.
* @param slot Slot concerned.
*/
void dvb_ca_en50221_camready_irq(struct dvb_ca_en50221 *pubca, int slot)
{
struct dvb_ca_private *ca = pubca->private;
dprintk("CAMREADY IRQ slot:%i\n", slot);
if (ca->slot_info[slot].slot_state == DVB_CA_SLOTSTATE_WAITREADY) {
ca->slot_info[slot].slot_state = DVB_CA_SLOTSTATE_VALIDATE;
dvb_ca_en50221_thread_wakeup(ca);
}
}
/**
* An FR or DA IRQ has occurred.
*
* @param ca CA instance.
* @param slot Slot concerned.
*/
void dvb_ca_en50221_frda_irq(struct dvb_ca_en50221 *pubca, int slot)
{
struct dvb_ca_private *ca = pubca->private;
int flags;
dprintk("FR/DA IRQ slot:%i\n", slot);
switch (ca->slot_info[slot].slot_state) {
case DVB_CA_SLOTSTATE_LINKINIT:
flags = ca->pub->read_cam_control(pubca, slot, CTRLIF_STATUS);
if (flags & STATUSREG_DA) {
dprintk("CAM supports DA IRQ\n");
ca->slot_info[slot].da_irq_supported = 1;
}
break;
case DVB_CA_SLOTSTATE_RUNNING:
if (ca->open)
dvb_ca_en50221_thread_wakeup(ca);
break;
}
}
/* ******************************************************************************** */
/* EN50221 thread functions */
/**
* Wake up the DVB CA thread
*
* @param ca CA instance.
*/
static void dvb_ca_en50221_thread_wakeup(struct dvb_ca_private *ca)
{
dprintk("%s\n", __func__);
ca->wakeup = 1;
mb();
wake_up_process(ca->thread);
}
/**
* Update the delay used by the thread.
*
* @param ca CA instance.
*/
static void dvb_ca_en50221_thread_update_delay(struct dvb_ca_private *ca)
{
int delay;
int curdelay = 100000000;
int slot;
/* Beware of too high polling frequency, because one polling
* call might take several hundred milliseconds until timeout!
*/
for (slot = 0; slot < ca->slot_count; slot++) {
switch (ca->slot_info[slot].slot_state) {
default:
case DVB_CA_SLOTSTATE_NONE:
delay = HZ * 60; /* 60s */
if (!(ca->flags & DVB_CA_EN50221_FLAG_IRQ_CAMCHANGE))
delay = HZ * 5; /* 5s */
break;
case DVB_CA_SLOTSTATE_INVALID:
delay = HZ * 60; /* 60s */
if (!(ca->flags & DVB_CA_EN50221_FLAG_IRQ_CAMCHANGE))
delay = HZ / 10; /* 100ms */
break;
case DVB_CA_SLOTSTATE_UNINITIALISED:
case DVB_CA_SLOTSTATE_WAITREADY:
case DVB_CA_SLOTSTATE_VALIDATE:
case DVB_CA_SLOTSTATE_WAITFR:
case DVB_CA_SLOTSTATE_LINKINIT:
delay = HZ / 10; /* 100ms */
break;
case DVB_CA_SLOTSTATE_RUNNING:
delay = HZ * 60; /* 60s */
if (!(ca->flags & DVB_CA_EN50221_FLAG_IRQ_CAMCHANGE))
delay = HZ / 10; /* 100ms */
if (ca->open) {
if ((!ca->slot_info[slot].da_irq_supported) ||
(!(ca->flags & DVB_CA_EN50221_FLAG_IRQ_DA)))
delay = HZ / 10; /* 100ms */
}
break;
}
if (delay < curdelay)
curdelay = delay;
}
ca->delay = curdelay;
}
/**
* Kernel thread which monitors CA slots for CAM changes, and performs data transfers.
*/
static int dvb_ca_en50221_thread(void *data)
{
struct dvb_ca_private *ca = data;
int slot;
int flags;
int status;
int pktcount;
void *rxbuf;
dprintk("%s\n", __func__);
/* choose the correct initial delay */
dvb_ca_en50221_thread_update_delay(ca);
/* main loop */
while (!kthread_should_stop()) {
/* sleep for a bit */
if (!ca->wakeup) {
set_current_state(TASK_INTERRUPTIBLE);
schedule_timeout(ca->delay);
if (kthread_should_stop())
return 0;
}
ca->wakeup = 0;
/* go through all the slots processing them */
for (slot = 0; slot < ca->slot_count; slot++) {
mutex_lock(&ca->slot_info[slot].slot_lock);
// check the cam status + deal with CAMCHANGEs
while (dvb_ca_en50221_check_camstatus(ca, slot)) {
/* clear down an old CI slot if necessary */
if (ca->slot_info[slot].slot_state != DVB_CA_SLOTSTATE_NONE)
dvb_ca_en50221_slot_shutdown(ca, slot);
/* if a CAM is NOW present, initialise it */
if (ca->slot_info[slot].camchange_type == DVB_CA_EN50221_CAMCHANGE_INSERTED) {
ca->slot_info[slot].slot_state = DVB_CA_SLOTSTATE_UNINITIALISED;
}
/* we've handled one CAMCHANGE */
dvb_ca_en50221_thread_update_delay(ca);
atomic_dec(&ca->slot_info[slot].camchange_count);
}
// CAM state machine
switch (ca->slot_info[slot].slot_state) {
case DVB_CA_SLOTSTATE_NONE:
case DVB_CA_SLOTSTATE_INVALID:
// no action needed
break;
case DVB_CA_SLOTSTATE_UNINITIALISED:
ca->slot_info[slot].slot_state = DVB_CA_SLOTSTATE_WAITREADY;
ca->pub->slot_reset(ca->pub, slot);
ca->slot_info[slot].timeout = jiffies + (INIT_TIMEOUT_SECS * HZ);
break;
case DVB_CA_SLOTSTATE_WAITREADY:
if (time_after(jiffies, ca->slot_info[slot].timeout)) {
printk("dvb_ca adaptor %d: PC card did not respond :(\n",
ca->dvbdev->adapter->num);
ca->slot_info[slot].slot_state = DVB_CA_SLOTSTATE_INVALID;
dvb_ca_en50221_thread_update_delay(ca);
break;
}
// no other action needed; will automatically change state when ready
break;
case DVB_CA_SLOTSTATE_VALIDATE:
if (dvb_ca_en50221_parse_attributes(ca, slot) != 0) {
/* we need this extra check for annoying interfaces like the budget-av */
if ((!(ca->flags & DVB_CA_EN50221_FLAG_IRQ_CAMCHANGE)) &&
(ca->pub->poll_slot_status)) {
status = ca->pub->poll_slot_status(ca->pub, slot, 0);
if (!(status & DVB_CA_EN50221_POLL_CAM_PRESENT)) {
ca->slot_info[slot].slot_state = DVB_CA_SLOTSTATE_NONE;
dvb_ca_en50221_thread_update_delay(ca);
break;
}
}
printk("dvb_ca adapter %d: Invalid PC card inserted :(\n",
ca->dvbdev->adapter->num);
ca->slot_info[slot].slot_state = DVB_CA_SLOTSTATE_INVALID;
dvb_ca_en50221_thread_update_delay(ca);
break;
}
if (dvb_ca_en50221_set_configoption(ca, slot) != 0) {
printk("dvb_ca adapter %d: Unable to initialise CAM :(\n",
ca->dvbdev->adapter->num);
ca->slot_info[slot].slot_state = DVB_CA_SLOTSTATE_INVALID;
dvb_ca_en50221_thread_update_delay(ca);
break;
}
if (ca->pub->write_cam_control(ca->pub, slot,
CTRLIF_COMMAND, CMDREG_RS) != 0) {
printk("dvb_ca adapter %d: Unable to reset CAM IF\n",
ca->dvbdev->adapter->num);
ca->slot_info[slot].slot_state = DVB_CA_SLOTSTATE_INVALID;
dvb_ca_en50221_thread_update_delay(ca);
break;
}
dprintk("DVB CAM validated successfully\n");
ca->slot_info[slot].timeout = jiffies + (INIT_TIMEOUT_SECS * HZ);
ca->slot_info[slot].slot_state = DVB_CA_SLOTSTATE_WAITFR;
ca->wakeup = 1;
break;
case DVB_CA_SLOTSTATE_WAITFR:
if (time_after(jiffies, ca->slot_info[slot].timeout)) {
printk("dvb_ca adapter %d: DVB CAM did not respond :(\n",
ca->dvbdev->adapter->num);
ca->slot_info[slot].slot_state = DVB_CA_SLOTSTATE_INVALID;
dvb_ca_en50221_thread_update_delay(ca);
break;
}
flags = ca->pub->read_cam_control(ca->pub, slot, CTRLIF_STATUS);
if (flags & STATUSREG_FR) {
ca->slot_info[slot].slot_state = DVB_CA_SLOTSTATE_LINKINIT;
ca->wakeup = 1;
}
break;
case DVB_CA_SLOTSTATE_LINKINIT:
if (dvb_ca_en50221_link_init(ca, slot) != 0) {
/* we need this extra check for annoying interfaces like the budget-av */
if ((!(ca->flags & DVB_CA_EN50221_FLAG_IRQ_CAMCHANGE)) &&
(ca->pub->poll_slot_status)) {
status = ca->pub->poll_slot_status(ca->pub, slot, 0);
if (!(status & DVB_CA_EN50221_POLL_CAM_PRESENT)) {
ca->slot_info[slot].slot_state = DVB_CA_SLOTSTATE_NONE;
dvb_ca_en50221_thread_update_delay(ca);
break;
}
}
printk("dvb_ca adapter %d: DVB CAM link initialisation failed :(\n", ca->dvbdev->adapter->num);
ca->slot_info[slot].slot_state = DVB_CA_SLOTSTATE_INVALID;
dvb_ca_en50221_thread_update_delay(ca);
break;
}
if (ca->slot_info[slot].rx_buffer.data == NULL) {
rxbuf = vmalloc(RX_BUFFER_SIZE);
if (rxbuf == NULL) {
printk("dvb_ca adapter %d: Unable to allocate CAM rx buffer :(\n", ca->dvbdev->adapter->num);
ca->slot_info[slot].slot_state = DVB_CA_SLOTSTATE_INVALID;
dvb_ca_en50221_thread_update_delay(ca);
break;
}
dvb_ringbuffer_init(&ca->slot_info[slot].rx_buffer, rxbuf, RX_BUFFER_SIZE);
}
ca->pub->slot_ts_enable(ca->pub, slot);
ca->slot_info[slot].slot_state = DVB_CA_SLOTSTATE_RUNNING;
dvb_ca_en50221_thread_update_delay(ca);
printk("dvb_ca adapter %d: DVB CAM detected and initialised successfully\n", ca->dvbdev->adapter->num);
break;
case DVB_CA_SLOTSTATE_RUNNING:
if (!ca->open)
break;
// poll slots for data
pktcount = 0;
while ((status = dvb_ca_en50221_read_data(ca, slot, NULL, 0)) > 0) {
if (!ca->open)
break;
/* if a CAMCHANGE occurred at some point, do not do any more processing of this slot */
if (dvb_ca_en50221_check_camstatus(ca, slot)) {
// we dont want to sleep on the next iteration so we can handle the cam change
ca->wakeup = 1;
break;
}
/* check if we've hit our limit this time */
if (++pktcount >= MAX_RX_PACKETS_PER_ITERATION) {
// dont sleep; there is likely to be more data to read
ca->wakeup = 1;
break;
}
}
break;
}
mutex_unlock(&ca->slot_info[slot].slot_lock);
}
}
return 0;
}
/* ******************************************************************************** */
/* EN50221 IO interface functions */
/**
* Real ioctl implementation.
* NOTE: CA_SEND_MSG/CA_GET_MSG ioctls have userspace buffers passed to them.
*
* @param inode Inode concerned.
* @param file File concerned.
* @param cmd IOCTL command.
* @param arg Associated argument.
*
* @return 0 on success, <0 on error.
*/
static int dvb_ca_en50221_io_do_ioctl(struct file *file,
unsigned int cmd, void *parg)
{
struct dvb_device *dvbdev = file->private_data;
struct dvb_ca_private *ca = dvbdev->priv;
int err = 0;
int slot;
dprintk("%s\n", __func__);
switch (cmd) {
case CA_RESET:
for (slot = 0; slot < ca->slot_count; slot++) {
mutex_lock(&ca->slot_info[slot].slot_lock);
if (ca->slot_info[slot].slot_state != DVB_CA_SLOTSTATE_NONE) {
dvb_ca_en50221_slot_shutdown(ca, slot);
if (ca->flags & DVB_CA_EN50221_FLAG_IRQ_CAMCHANGE)
dvb_ca_en50221_camchange_irq(ca->pub,
slot,
DVB_CA_EN50221_CAMCHANGE_INSERTED);
}
mutex_unlock(&ca->slot_info[slot].slot_lock);
}
ca->next_read_slot = 0;
dvb_ca_en50221_thread_wakeup(ca);
break;
case CA_GET_CAP: {
struct ca_caps *caps = parg;
caps->slot_num = ca->slot_count;
caps->slot_type = CA_CI_LINK;
caps->descr_num = 0;
caps->descr_type = 0;
break;
}
case CA_GET_SLOT_INFO: {
struct ca_slot_info *info = parg;
if ((info->num > ca->slot_count) || (info->num < 0))
return -EINVAL;
info->type = CA_CI_LINK;
info->flags = 0;
if ((ca->slot_info[info->num].slot_state != DVB_CA_SLOTSTATE_NONE)
&& (ca->slot_info[info->num].slot_state != DVB_CA_SLOTSTATE_INVALID)) {
info->flags = CA_CI_MODULE_PRESENT;
}
if (ca->slot_info[info->num].slot_state == DVB_CA_SLOTSTATE_RUNNING) {
info->flags |= CA_CI_MODULE_READY;
}
break;
}
default:
err = -EINVAL;
break;
}
return err;
}
/**
* Wrapper for ioctl implementation.
*
* @param inode Inode concerned.
* @param file File concerned.
* @param cmd IOCTL command.
* @param arg Associated argument.
*
* @return 0 on success, <0 on error.
*/
static long dvb_ca_en50221_io_ioctl(struct file *file,
unsigned int cmd, unsigned long arg)
{
return dvb_usercopy(file, cmd, arg, dvb_ca_en50221_io_do_ioctl);
}
/**
* Implementation of write() syscall.
*
* @param file File structure.
* @param buf Source buffer.
* @param count Size of source buffer.
* @param ppos Position in file (ignored).
*
* @return Number of bytes read, or <0 on error.
*/
static ssize_t dvb_ca_en50221_io_write(struct file *file,
const char __user * buf, size_t count, loff_t * ppos)
{
struct dvb_device *dvbdev = file->private_data;
struct dvb_ca_private *ca = dvbdev->priv;
u8 slot, connection_id;
int status;
u8 fragbuf[HOST_LINK_BUF_SIZE];
int fragpos = 0;
int fraglen;
unsigned long timeout;
int written;
dprintk("%s\n", __func__);
/* Incoming packet has a 2 byte header. hdr[0] = slot_id, hdr[1] = connection_id */
if (count < 2)
return -EINVAL;
/* extract slot & connection id */
if (copy_from_user(&slot, buf, 1))
return -EFAULT;
if (copy_from_user(&connection_id, buf + 1, 1))
return -EFAULT;
buf += 2;
count -= 2;
/* check if the slot is actually running */
if (ca->slot_info[slot].slot_state != DVB_CA_SLOTSTATE_RUNNING)
return -EINVAL;
/* fragment the packets & store in the buffer */
while (fragpos < count) {
fraglen = ca->slot_info[slot].link_buf_size - 2;
if ((count - fragpos) < fraglen)
fraglen = count - fragpos;
fragbuf[0] = connection_id;
fragbuf[1] = ((fragpos + fraglen) < count) ? 0x80 : 0x00;
status = copy_from_user(fragbuf + 2, buf + fragpos, fraglen);
if (status) {
status = -EFAULT;
goto exit;
}
timeout = jiffies + HZ / 2;
written = 0;
while (!time_after(jiffies, timeout)) {
/* check the CAM hasn't been removed/reset in the meantime */
if (ca->slot_info[slot].slot_state != DVB_CA_SLOTSTATE_RUNNING) {
status = -EIO;
goto exit;
}
mutex_lock(&ca->slot_info[slot].slot_lock);
status = dvb_ca_en50221_write_data(ca, slot, fragbuf, fraglen + 2);
mutex_unlock(&ca->slot_info[slot].slot_lock);
if (status == (fraglen + 2)) {
written = 1;
break;
}
if (status != -EAGAIN)
goto exit;
msleep(1);
}
if (!written) {
status = -EIO;
goto exit;
}
fragpos += fraglen;
}
status = count + 2;
exit:
return status;
}
/**
* Condition for waking up in dvb_ca_en50221_io_read_condition
*/
static int dvb_ca_en50221_io_read_condition(struct dvb_ca_private *ca,
int *result, int *_slot)
{
int slot;
int slot_count = 0;
int idx;
size_t fraglen;
int connection_id = -1;
int found = 0;
u8 hdr[2];
slot = ca->next_read_slot;
while ((slot_count < ca->slot_count) && (!found)) {
if (ca->slot_info[slot].slot_state != DVB_CA_SLOTSTATE_RUNNING)
goto nextslot;
if (ca->slot_info[slot].rx_buffer.data == NULL) {
return 0;
}
idx = dvb_ringbuffer_pkt_next(&ca->slot_info[slot].rx_buffer, -1, &fraglen);
while (idx != -1) {
dvb_ringbuffer_pkt_read(&ca->slot_info[slot].rx_buffer, idx, 0, hdr, 2);
if (connection_id == -1)
connection_id = hdr[0];
if ((hdr[0] == connection_id) && ((hdr[1] & 0x80) == 0)) {
*_slot = slot;
found = 1;
break;
}
idx = dvb_ringbuffer_pkt_next(&ca->slot_info[slot].rx_buffer, idx, &fraglen);
}
nextslot:
slot = (slot + 1) % ca->slot_count;
slot_count++;
}
ca->next_read_slot = slot;
return found;
}
/**
* Implementation of read() syscall.
*
* @param file File structure.
* @param buf Destination buffer.
* @param count Size of destination buffer.
* @param ppos Position in file (ignored).
*
* @return Number of bytes read, or <0 on error.
*/
static ssize_t dvb_ca_en50221_io_read(struct file *file, char __user * buf,
size_t count, loff_t * ppos)
{
struct dvb_device *dvbdev = file->private_data;
struct dvb_ca_private *ca = dvbdev->priv;
int status;
int result = 0;
u8 hdr[2];
int slot;
int connection_id = -1;
size_t idx, idx2;
int last_fragment = 0;
size_t fraglen;
int pktlen;
int dispose = 0;
dprintk("%s\n", __func__);
/* Outgoing packet has a 2 byte header. hdr[0] = slot_id, hdr[1] = connection_id */
if (count < 2)
return -EINVAL;
/* wait for some data */
if ((status = dvb_ca_en50221_io_read_condition(ca, &result, &slot)) == 0) {
/* if we're in nonblocking mode, exit immediately */
if (file->f_flags & O_NONBLOCK)
return -EWOULDBLOCK;
/* wait for some data */
status = wait_event_interruptible(ca->wait_queue,
dvb_ca_en50221_io_read_condition
(ca, &result, &slot));
}
if ((status < 0) || (result < 0)) {
if (result)
return result;
return status;
}
idx = dvb_ringbuffer_pkt_next(&ca->slot_info[slot].rx_buffer, -1, &fraglen);
pktlen = 2;
do {
if (idx == -1) {
printk("dvb_ca adapter %d: BUG: read packet ended before last_fragment encountered\n", ca->dvbdev->adapter->num);
status = -EIO;
goto exit;
}
dvb_ringbuffer_pkt_read(&ca->slot_info[slot].rx_buffer, idx, 0, hdr, 2);
if (connection_id == -1)
connection_id = hdr[0];
if (hdr[0] == connection_id) {
if (pktlen < count) {
if ((pktlen + fraglen - 2) > count) {
fraglen = count - pktlen;
} else {
fraglen -= 2;
}
if ((status = dvb_ringbuffer_pkt_read_user(&ca->slot_info[slot].rx_buffer, idx, 2,
buf + pktlen, fraglen)) < 0) {
goto exit;
}
pktlen += fraglen;
}
if ((hdr[1] & 0x80) == 0)
last_fragment = 1;
dispose = 1;
}
idx2 = dvb_ringbuffer_pkt_next(&ca->slot_info[slot].rx_buffer, idx, &fraglen);
if (dispose)
dvb_ringbuffer_pkt_dispose(&ca->slot_info[slot].rx_buffer, idx);
idx = idx2;
dispose = 0;
} while (!last_fragment);
hdr[0] = slot;
hdr[1] = connection_id;
status = copy_to_user(buf, hdr, 2);
if (status) {
status = -EFAULT;
goto exit;
}
status = pktlen;
exit:
return status;
}
/**
* Implementation of file open syscall.
*
* @param inode Inode concerned.
* @param file File concerned.
*
* @return 0 on success, <0 on failure.
*/
static int dvb_ca_en50221_io_open(struct inode *inode, struct file *file)
{
struct dvb_device *dvbdev = file->private_data;
struct dvb_ca_private *ca = dvbdev->priv;
int err;
int i;
dprintk("%s\n", __func__);
if (!try_module_get(ca->pub->owner))
return -EIO;
err = dvb_generic_open(inode, file);
if (err < 0) {
module_put(ca->pub->owner);
return err;
}
for (i = 0; i < ca->slot_count; i++) {
if (ca->slot_info[i].slot_state == DVB_CA_SLOTSTATE_RUNNING) {
if (ca->slot_info[i].rx_buffer.data != NULL) {
/* it is safe to call this here without locks because
* ca->open == 0. Data is not read in this case */
dvb_ringbuffer_flush(&ca->slot_info[i].rx_buffer);
}
}
}
ca->open = 1;
dvb_ca_en50221_thread_update_delay(ca);
dvb_ca_en50221_thread_wakeup(ca);
return 0;
}
/**
* Implementation of file close syscall.
*
* @param inode Inode concerned.
* @param file File concerned.
*
* @return 0 on success, <0 on failure.
*/
static int dvb_ca_en50221_io_release(struct inode *inode, struct file *file)
{
struct dvb_device *dvbdev = file->private_data;
struct dvb_ca_private *ca = dvbdev->priv;
int err;
dprintk("%s\n", __func__);
/* mark the CA device as closed */
ca->open = 0;
dvb_ca_en50221_thread_update_delay(ca);
err = dvb_generic_release(inode, file);
module_put(ca->pub->owner);
return err;
}
/**
* Implementation of poll() syscall.
*
* @param file File concerned.
* @param wait poll wait table.
*
* @return Standard poll mask.
*/
static unsigned int dvb_ca_en50221_io_poll(struct file *file, poll_table * wait)
{
struct dvb_device *dvbdev = file->private_data;
struct dvb_ca_private *ca = dvbdev->priv;
unsigned int mask = 0;
int slot;
int result = 0;
dprintk("%s\n", __func__);
if (dvb_ca_en50221_io_read_condition(ca, &result, &slot) == 1) {
mask |= POLLIN;
}
/* if there is something, return now */
if (mask)
return mask;
/* wait for something to happen */
poll_wait(file, &ca->wait_queue, wait);
if (dvb_ca_en50221_io_read_condition(ca, &result, &slot) == 1) {
mask |= POLLIN;
}
return mask;
}
EXPORT_SYMBOL(dvb_ca_en50221_init);
static const struct file_operations dvb_ca_fops = {
.owner = THIS_MODULE,
.read = dvb_ca_en50221_io_read,
.write = dvb_ca_en50221_io_write,
.unlocked_ioctl = dvb_ca_en50221_io_ioctl,
.open = dvb_ca_en50221_io_open,
.release = dvb_ca_en50221_io_release,
.poll = dvb_ca_en50221_io_poll,
.llseek = noop_llseek,
};
static struct dvb_device dvbdev_ca = {
.priv = NULL,
.users = 1,
.readers = 1,
.writers = 1,
.fops = &dvb_ca_fops,
};
/* ******************************************************************************** */
/* Initialisation/shutdown functions */
/**
* Initialise a new DVB CA EN50221 interface device.
*
* @param dvb_adapter DVB adapter to attach the new CA device to.
* @param ca The dvb_ca instance.
* @param flags Flags describing the CA device (DVB_CA_FLAG_*).
* @param slot_count Number of slots supported.
*
* @return 0 on success, nonzero on failure
*/
int dvb_ca_en50221_init(struct dvb_adapter *dvb_adapter,
struct dvb_ca_en50221 *pubca, int flags, int slot_count)
{
int ret;
struct dvb_ca_private *ca = NULL;
int i;
dprintk("%s\n", __func__);
if (slot_count < 1)
return -EINVAL;
/* initialise the system data */
if ((ca = kzalloc(sizeof(struct dvb_ca_private), GFP_KERNEL)) == NULL) {
ret = -ENOMEM;
goto error;
}
ca->pub = pubca;
ca->flags = flags;
ca->slot_count = slot_count;
if ((ca->slot_info = kcalloc(slot_count, sizeof(struct dvb_ca_slot), GFP_KERNEL)) == NULL) {
ret = -ENOMEM;
goto error;
}
init_waitqueue_head(&ca->wait_queue);
ca->open = 0;
ca->wakeup = 0;
ca->next_read_slot = 0;
pubca->private = ca;
/* register the DVB device */
ret = dvb_register_device(dvb_adapter, &ca->dvbdev, &dvbdev_ca, ca, DVB_DEVICE_CA);
if (ret)
goto error;
/* now initialise each slot */
for (i = 0; i < slot_count; i++) {
memset(&ca->slot_info[i], 0, sizeof(struct dvb_ca_slot));
ca->slot_info[i].slot_state = DVB_CA_SLOTSTATE_NONE;
atomic_set(&ca->slot_info[i].camchange_count, 0);
ca->slot_info[i].camchange_type = DVB_CA_EN50221_CAMCHANGE_REMOVED;
mutex_init(&ca->slot_info[i].slot_lock);
}
if (signal_pending(current)) {
ret = -EINTR;
goto error;
}
mb();
/* create a kthread for monitoring this CA device */
ca->thread = kthread_run(dvb_ca_en50221_thread, ca, "kdvb-ca-%i:%i",
ca->dvbdev->adapter->num, ca->dvbdev->id);
if (IS_ERR(ca->thread)) {
ret = PTR_ERR(ca->thread);
printk("dvb_ca_init: failed to start kernel_thread (%d)\n",
ret);
goto error;
}
return 0;
error:
if (ca != NULL) {
if (ca->dvbdev != NULL)
dvb_unregister_device(ca->dvbdev);
kfree(ca->slot_info);
kfree(ca);
}
pubca->private = NULL;
return ret;
}
EXPORT_SYMBOL(dvb_ca_en50221_release);
/**
* Release a DVB CA EN50221 interface device.
*
* @param ca_dev The dvb_device_t instance for the CA device.
* @param ca The associated dvb_ca instance.
*/
void dvb_ca_en50221_release(struct dvb_ca_en50221 *pubca)
{
struct dvb_ca_private *ca = pubca->private;
int i;
dprintk("%s\n", __func__);
/* shutdown the thread if there was one */
kthread_stop(ca->thread);
for (i = 0; i < ca->slot_count; i++) {
dvb_ca_en50221_slot_shutdown(ca, i);
vfree(ca->slot_info[i].rx_buffer.data);
}
kfree(ca->slot_info);
dvb_unregister_device(ca->dvbdev);
kfree(ca);
pubca->private = NULL;
}