- 根目录:
- drivers
- usb
- gadget
- f_obex.c
/*
* f_obex.c -- USB CDC OBEX function driver
*
* Copyright (C) 2008 Nokia Corporation
* Contact: Felipe Balbi <felipe.balbi@nokia.com>
*
* Based on f_acm.c by Al Borchers and David Brownell.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
/* #define VERBOSE_DEBUG */
#include <linux/slab.h>
#include <linux/kernel.h>
#include <linux/device.h>
#include "u_serial.h"
#include "gadget_chips.h"
/*
* This CDC OBEX function support just packages a TTY-ish byte stream.
* A user mode server will put it into "raw" mode and handle all the
* relevant protocol details ... this is just a kernel passthrough.
* When possible, we prevent gadget enumeration until that server is
* ready to handle the commands.
*/
struct obex_ep_descs {
struct usb_endpoint_descriptor *obex_in;
struct usb_endpoint_descriptor *obex_out;
};
struct f_obex {
struct gserial port;
u8 ctrl_id;
u8 data_id;
u8 port_num;
u8 can_activate;
struct obex_ep_descs fs;
struct obex_ep_descs hs;
};
static inline struct f_obex *func_to_obex(struct usb_function *f)
{
return container_of(f, struct f_obex, port.func);
}
static inline struct f_obex *port_to_obex(struct gserial *p)
{
return container_of(p, struct f_obex, port);
}
/*-------------------------------------------------------------------------*/
#define OBEX_CTRL_IDX 0
#define OBEX_DATA_IDX 1
static struct usb_string obex_string_defs[] = {
[OBEX_CTRL_IDX].s = "CDC Object Exchange (OBEX)",
[OBEX_DATA_IDX].s = "CDC OBEX Data",
{ }, /* end of list */
};
static struct usb_gadget_strings obex_string_table = {
.language = 0x0409, /* en-US */
.strings = obex_string_defs,
};
static struct usb_gadget_strings *obex_strings[] = {
&obex_string_table,
NULL,
};
/*-------------------------------------------------------------------------*/
static struct usb_interface_descriptor obex_control_intf __initdata = {
.bLength = sizeof(obex_control_intf),
.bDescriptorType = USB_DT_INTERFACE,
.bInterfaceNumber = 0,
.bAlternateSetting = 0,
.bNumEndpoints = 0,
.bInterfaceClass = USB_CLASS_COMM,
.bInterfaceSubClass = USB_CDC_SUBCLASS_OBEX,
};
static struct usb_interface_descriptor obex_data_nop_intf __initdata = {
.bLength = sizeof(obex_data_nop_intf),
.bDescriptorType = USB_DT_INTERFACE,
.bInterfaceNumber = 1,
.bAlternateSetting = 0,
.bNumEndpoints = 0,
.bInterfaceClass = USB_CLASS_CDC_DATA,
};
static struct usb_interface_descriptor obex_data_intf __initdata = {
.bLength = sizeof(obex_data_intf),
.bDescriptorType = USB_DT_INTERFACE,
.bInterfaceNumber = 2,
.bAlternateSetting = 1,
.bNumEndpoints = 2,
.bInterfaceClass = USB_CLASS_CDC_DATA,
};
static struct usb_cdc_header_desc obex_cdc_header_desc __initdata = {
.bLength = sizeof(obex_cdc_header_desc),
.bDescriptorType = USB_DT_CS_INTERFACE,
.bDescriptorSubType = USB_CDC_HEADER_TYPE,
.bcdCDC = cpu_to_le16(0x0120),
};
static struct usb_cdc_union_desc obex_cdc_union_desc __initdata = {
.bLength = sizeof(obex_cdc_union_desc),
.bDescriptorType = USB_DT_CS_INTERFACE,
.bDescriptorSubType = USB_CDC_UNION_TYPE,
.bMasterInterface0 = 1,
.bSlaveInterface0 = 2,
};
static struct usb_cdc_obex_desc obex_desc __initdata = {
.bLength = sizeof(obex_desc),
.bDescriptorType = USB_DT_CS_INTERFACE,
.bDescriptorSubType = USB_CDC_OBEX_TYPE,
.bcdVersion = cpu_to_le16(0x0100),
};
/* High-Speed Support */
static struct usb_endpoint_descriptor obex_hs_ep_out_desc __initdata = {
.bLength = USB_DT_ENDPOINT_SIZE,
.bDescriptorType = USB_DT_ENDPOINT,
.bEndpointAddress = USB_DIR_OUT,
.bmAttributes = USB_ENDPOINT_XFER_BULK,
.wMaxPacketSize = cpu_to_le16(512),
};
static struct usb_endpoint_descriptor obex_hs_ep_in_desc __initdata = {
.bLength = USB_DT_ENDPOINT_SIZE,
.bDescriptorType = USB_DT_ENDPOINT,
.bEndpointAddress = USB_DIR_IN,
.bmAttributes = USB_ENDPOINT_XFER_BULK,
.wMaxPacketSize = cpu_to_le16(512),
};
static struct usb_descriptor_header *hs_function[] __initdata = {
(struct usb_descriptor_header *) &obex_control_intf,
(struct usb_descriptor_header *) &obex_cdc_header_desc,
(struct usb_descriptor_header *) &obex_desc,
(struct usb_descriptor_header *) &obex_cdc_union_desc,
(struct usb_descriptor_header *) &obex_data_nop_intf,
(struct usb_descriptor_header *) &obex_data_intf,
(struct usb_descriptor_header *) &obex_hs_ep_in_desc,
(struct usb_descriptor_header *) &obex_hs_ep_out_desc,
NULL,
};
/* Full-Speed Support */
static struct usb_endpoint_descriptor obex_fs_ep_in_desc __initdata = {
.bLength = USB_DT_ENDPOINT_SIZE,
.bDescriptorType = USB_DT_ENDPOINT,
.bEndpointAddress = USB_DIR_IN,
.bmAttributes = USB_ENDPOINT_XFER_BULK,
};
static struct usb_endpoint_descriptor obex_fs_ep_out_desc __initdata = {
.bLength = USB_DT_ENDPOINT_SIZE,
.bDescriptorType = USB_DT_ENDPOINT,
.bEndpointAddress = USB_DIR_OUT,
.bmAttributes = USB_ENDPOINT_XFER_BULK,
};
static struct usb_descriptor_header *fs_function[] __initdata = {
(struct usb_descriptor_header *) &obex_control_intf,
(struct usb_descriptor_header *) &obex_cdc_header_desc,
(struct usb_descriptor_header *) &obex_desc,
(struct usb_descriptor_header *) &obex_cdc_union_desc,
(struct usb_descriptor_header *) &obex_data_nop_intf,
(struct usb_descriptor_header *) &obex_data_intf,
(struct usb_descriptor_header *) &obex_fs_ep_in_desc,
(struct usb_descriptor_header *) &obex_fs_ep_out_desc,
NULL,
};
/*-------------------------------------------------------------------------*/
static int obex_set_alt(struct usb_function *f, unsigned intf, unsigned alt)
{
struct f_obex *obex = func_to_obex(f);
struct usb_composite_dev *cdev = f->config->cdev;
if (intf == obex->ctrl_id) {
if (alt != 0)
goto fail;
/* NOP */
DBG(cdev, "reset obex ttyGS%d control\n", obex->port_num);
} else if (intf == obex->data_id) {
if (alt > 1)
goto fail;
if (obex->port.in->driver_data) {
DBG(cdev, "reset obex ttyGS%d\n", obex->port_num);
gserial_disconnect(&obex->port);
}
if (!obex->port.in_desc) {
DBG(cdev, "init obex ttyGS%d\n", obex->port_num);
obex->port.in_desc = ep_choose(cdev->gadget,
obex->hs.obex_in, obex->fs.obex_in);
obex->port.out_desc = ep_choose(cdev->gadget,
obex->hs.obex_out, obex->fs.obex_out);
}
if (alt == 1) {
DBG(cdev, "activate obex ttyGS%d\n", obex->port_num);
gserial_connect(&obex->port, obex->port_num);
}
} else
goto fail;
return 0;
fail:
return -EINVAL;
}
static int obex_get_alt(struct usb_function *f, unsigned intf)
{
struct f_obex *obex = func_to_obex(f);
if (intf == obex->ctrl_id)
return 0;
return obex->port.in->driver_data ? 1 : 0;
}
static void obex_disable(struct usb_function *f)
{
struct f_obex *obex = func_to_obex(f);
struct usb_composite_dev *cdev = f->config->cdev;
DBG(cdev, "obex ttyGS%d disable\n", obex->port_num);
gserial_disconnect(&obex->port);
}
/*-------------------------------------------------------------------------*/
static void obex_connect(struct gserial *g)
{
struct f_obex *obex = port_to_obex(g);
struct usb_composite_dev *cdev = g->func.config->cdev;
int status;
if (!obex->can_activate)
return;
status = usb_function_activate(&g->func);
if (status)
DBG(cdev, "obex ttyGS%d function activate --> %d\n",
obex->port_num, status);
}
static void obex_disconnect(struct gserial *g)
{
struct f_obex *obex = port_to_obex(g);
struct usb_composite_dev *cdev = g->func.config->cdev;
int status;
if (!obex->can_activate)
return;
status = usb_function_deactivate(&g->func);
if (status)
DBG(cdev, "obex ttyGS%d function deactivate --> %d\n",
obex->port_num, status);
}
/*-------------------------------------------------------------------------*/
static int __init
obex_bind(struct usb_configuration *c, struct usb_function *f)
{
struct usb_composite_dev *cdev = c->cdev;
struct f_obex *obex = func_to_obex(f);
int status;
struct usb_ep *ep;
/* allocate instance-specific interface IDs, and patch descriptors */
status = usb_interface_id(c, f);
if (status < 0)
goto fail;
obex->ctrl_id = status;
obex_control_intf.bInterfaceNumber = status;
obex_cdc_union_desc.bMasterInterface0 = status;
status = usb_interface_id(c, f);
if (status < 0)
goto fail;
obex->data_id = status;
obex_data_nop_intf.bInterfaceNumber = status;
obex_data_intf.bInterfaceNumber = status;
obex_cdc_union_desc.bSlaveInterface0 = status;
/* allocate instance-specific endpoints */
ep = usb_ep_autoconfig(cdev->gadget, &obex_fs_ep_in_desc);
if (!ep)
goto fail;
obex->port.in = ep;
ep->driver_data = cdev; /* claim */
ep = usb_ep_autoconfig(cdev->gadget, &obex_fs_ep_out_desc);
if (!ep)
goto fail;
obex->port.out = ep;
ep->driver_data = cdev; /* claim */
/* copy descriptors, and track endpoint copies */
f->descriptors = usb_copy_descriptors(fs_function);
obex->fs.obex_in = usb_find_endpoint(fs_function,
f->descriptors, &obex_fs_ep_in_desc);
obex->fs.obex_out = usb_find_endpoint(fs_function,
f->descriptors, &obex_fs_ep_out_desc);
/* support all relevant hardware speeds... we expect that when
* hardware is dual speed, all bulk-capable endpoints work at
* both speeds
*/
if (gadget_is_dualspeed(c->cdev->gadget)) {
obex_hs_ep_in_desc.bEndpointAddress =
obex_fs_ep_in_desc.bEndpointAddress;
obex_hs_ep_out_desc.bEndpointAddress =
obex_fs_ep_out_desc.bEndpointAddress;
/* copy descriptors, and track endpoint copies */
f->hs_descriptors = usb_copy_descriptors(hs_function);
obex->hs.obex_in = usb_find_endpoint(hs_function,
f->hs_descriptors, &obex_hs_ep_in_desc);
obex->hs.obex_out = usb_find_endpoint(hs_function,
f->hs_descriptors, &obex_hs_ep_out_desc);
}
/* Avoid letting this gadget enumerate until the userspace
* OBEX server is active.
*/
status = usb_function_deactivate(f);
if (status < 0)
WARNING(cdev, "obex ttyGS%d: can't prevent enumeration, %d\n",
obex->port_num, status);
else
obex->can_activate = true;
DBG(cdev, "obex ttyGS%d: %s speed IN/%s OUT/%s\n",
obex->port_num,
gadget_is_dualspeed(c->cdev->gadget) ? "dual" : "full",
obex->port.in->name, obex->port.out->name);
return 0;
fail:
/* we might as well release our claims on endpoints */
if (obex->port.out)
obex->port.out->driver_data = NULL;
if (obex->port.in)
obex->port.in->driver_data = NULL;
ERROR(cdev, "%s/%p: can't bind, err %d\n", f->name, f, status);
return status;
}
static void
obex_unbind(struct usb_configuration *c, struct usb_function *f)
{
if (gadget_is_dualspeed(c->cdev->gadget))
usb_free_descriptors(f->hs_descriptors);
usb_free_descriptors(f->descriptors);
kfree(func_to_obex(f));
}
/* Some controllers can't support CDC OBEX ... */
static inline bool can_support_obex(struct usb_configuration *c)
{
/* Since the first interface is a NOP, we can ignore the
* issue of multi-interface support on most controllers.
*
* Altsettings are mandatory, however...
*/
if (!gadget_supports_altsettings(c->cdev->gadget))
return false;
/* everything else is *probably* fine ... */
return true;
}
/**
* obex_bind_config - add a CDC OBEX function to a configuration
* @c: the configuration to support the CDC OBEX instance
* @port_num: /dev/ttyGS* port this interface will use
* Context: single threaded during gadget setup
*
* Returns zero on success, else negative errno.
*
* Caller must have called @gserial_setup() with enough ports to
* handle all the ones it binds. Caller is also responsible
* for calling @gserial_cleanup() before module unload.
*/
int __init obex_bind_config(struct usb_configuration *c, u8 port_num)
{
struct f_obex *obex;
int status;
if (!can_support_obex(c))
return -EINVAL;
/* maybe allocate device-global string IDs, and patch descriptors */
if (obex_string_defs[OBEX_CTRL_IDX].id == 0) {
status = usb_string_id(c->cdev);
if (status < 0)
return status;
obex_string_defs[OBEX_CTRL_IDX].id = status;
obex_control_intf.iInterface = status;
status = usb_string_id(c->cdev);
if (status < 0)
return status;
obex_string_defs[OBEX_DATA_IDX].id = status;
obex_data_nop_intf.iInterface =
obex_data_intf.iInterface = status;
}
/* allocate and initialize one new instance */
obex = kzalloc(sizeof *obex, GFP_KERNEL);
if (!obex)
return -ENOMEM;
obex->port_num = port_num;
obex->port.connect = obex_connect;
obex->port.disconnect = obex_disconnect;
obex->port.func.name = "obex";
obex->port.func.strings = obex_strings;
/* descriptors are per-instance copies */
obex->port.func.bind = obex_bind;
obex->port.func.unbind = obex_unbind;
obex->port.func.set_alt = obex_set_alt;
obex->port.func.get_alt = obex_get_alt;
obex->port.func.disable = obex_disable;
status = usb_add_function(c, &obex->port.func);
if (status)
kfree(obex);
return status;
}
MODULE_AUTHOR("Felipe Balbi");
MODULE_LICENSE("GPL");