- 根目录:
- drivers
- tty
- serial
- mcf.c
/****************************************************************************/
/*
* mcf.c -- Freescale ColdFire UART driver
*
* (C) Copyright 2003-2007, Greg Ungerer <gerg@snapgear.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*/
/****************************************************************************/
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/module.h>
#include <linux/console.h>
#include <linux/tty.h>
#include <linux/tty_flip.h>
#include <linux/serial.h>
#include <linux/serial_core.h>
#include <linux/io.h>
#include <asm/coldfire.h>
#include <asm/mcfsim.h>
#include <asm/mcfuart.h>
#include <asm/nettel.h>
/****************************************************************************/
/*
* Some boards implement the DTR/DCD lines using GPIO lines, most
* don't. Dummy out the access macros for those that don't. Those
* that do should define these macros somewhere in there board
* specific inlude files.
*/
#if !defined(mcf_getppdcd)
#define mcf_getppdcd(p) (1)
#endif
#if !defined(mcf_getppdtr)
#define mcf_getppdtr(p) (1)
#endif
#if !defined(mcf_setppdtr)
#define mcf_setppdtr(p, v) do { } while (0)
#endif
/****************************************************************************/
/*
* Local per-uart structure.
*/
struct mcf_uart {
struct uart_port port;
unsigned int sigs; /* Local copy of line sigs */
unsigned char imr; /* Local IMR mirror */
};
/****************************************************************************/
static unsigned int mcf_tx_empty(struct uart_port *port)
{
return (readb(port->membase + MCFUART_USR) & MCFUART_USR_TXEMPTY) ?
TIOCSER_TEMT : 0;
}
/****************************************************************************/
static unsigned int mcf_get_mctrl(struct uart_port *port)
{
struct mcf_uart *pp = container_of(port, struct mcf_uart, port);
unsigned int sigs;
sigs = (readb(port->membase + MCFUART_UIPR) & MCFUART_UIPR_CTS) ?
0 : TIOCM_CTS;
sigs |= (pp->sigs & TIOCM_RTS);
sigs |= (mcf_getppdcd(port->line) ? TIOCM_CD : 0);
sigs |= (mcf_getppdtr(port->line) ? TIOCM_DTR : 0);
return sigs;
}
/****************************************************************************/
static void mcf_set_mctrl(struct uart_port *port, unsigned int sigs)
{
struct mcf_uart *pp = container_of(port, struct mcf_uart, port);
pp->sigs = sigs;
mcf_setppdtr(port->line, (sigs & TIOCM_DTR));
if (sigs & TIOCM_RTS)
writeb(MCFUART_UOP_RTS, port->membase + MCFUART_UOP1);
else
writeb(MCFUART_UOP_RTS, port->membase + MCFUART_UOP0);
}
/****************************************************************************/
static void mcf_start_tx(struct uart_port *port)
{
struct mcf_uart *pp = container_of(port, struct mcf_uart, port);
pp->imr |= MCFUART_UIR_TXREADY;
writeb(pp->imr, port->membase + MCFUART_UIMR);
}
/****************************************************************************/
static void mcf_stop_tx(struct uart_port *port)
{
struct mcf_uart *pp = container_of(port, struct mcf_uart, port);
pp->imr &= ~MCFUART_UIR_TXREADY;
writeb(pp->imr, port->membase + MCFUART_UIMR);
}
/****************************************************************************/
static void mcf_stop_rx(struct uart_port *port)
{
struct mcf_uart *pp = container_of(port, struct mcf_uart, port);
pp->imr &= ~MCFUART_UIR_RXREADY;
writeb(pp->imr, port->membase + MCFUART_UIMR);
}
/****************************************************************************/
static void mcf_break_ctl(struct uart_port *port, int break_state)
{
unsigned long flags;
spin_lock_irqsave(&port->lock, flags);
if (break_state == -1)
writeb(MCFUART_UCR_CMDBREAKSTART, port->membase + MCFUART_UCR);
else
writeb(MCFUART_UCR_CMDBREAKSTOP, port->membase + MCFUART_UCR);
spin_unlock_irqrestore(&port->lock, flags);
}
/****************************************************************************/
static void mcf_enable_ms(struct uart_port *port)
{
}
/****************************************************************************/
static int mcf_startup(struct uart_port *port)
{
struct mcf_uart *pp = container_of(port, struct mcf_uart, port);
unsigned long flags;
spin_lock_irqsave(&port->lock, flags);
/* Reset UART, get it into known state... */
writeb(MCFUART_UCR_CMDRESETRX, port->membase + MCFUART_UCR);
writeb(MCFUART_UCR_CMDRESETTX, port->membase + MCFUART_UCR);
/* Enable the UART transmitter and receiver */
writeb(MCFUART_UCR_RXENABLE | MCFUART_UCR_TXENABLE,
port->membase + MCFUART_UCR);
/* Enable RX interrupts now */
pp->imr = MCFUART_UIR_RXREADY;
writeb(pp->imr, port->membase + MCFUART_UIMR);
spin_unlock_irqrestore(&port->lock, flags);
return 0;
}
/****************************************************************************/
static void mcf_shutdown(struct uart_port *port)
{
struct mcf_uart *pp = container_of(port, struct mcf_uart, port);
unsigned long flags;
spin_lock_irqsave(&port->lock, flags);
/* Disable all interrupts now */
pp->imr = 0;
writeb(pp->imr, port->membase + MCFUART_UIMR);
/* Disable UART transmitter and receiver */
writeb(MCFUART_UCR_CMDRESETRX, port->membase + MCFUART_UCR);
writeb(MCFUART_UCR_CMDRESETTX, port->membase + MCFUART_UCR);
spin_unlock_irqrestore(&port->lock, flags);
}
/****************************************************************************/
static void mcf_set_termios(struct uart_port *port, struct ktermios *termios,
struct ktermios *old)
{
unsigned long flags;
unsigned int baud, baudclk;
#if defined(CONFIG_M5272)
unsigned int baudfr;
#endif
unsigned char mr1, mr2;
baud = uart_get_baud_rate(port, termios, old, 0, 230400);
#if defined(CONFIG_M5272)
baudclk = (MCF_BUSCLK / baud) / 32;
baudfr = (((MCF_BUSCLK / baud) + 1) / 2) % 16;
#else
baudclk = ((MCF_BUSCLK / baud) + 16) / 32;
#endif
mr1 = MCFUART_MR1_RXIRQRDY | MCFUART_MR1_RXERRCHAR;
mr2 = 0;
switch (termios->c_cflag & CSIZE) {
case CS5: mr1 |= MCFUART_MR1_CS5; break;
case CS6: mr1 |= MCFUART_MR1_CS6; break;
case CS7: mr1 |= MCFUART_MR1_CS7; break;
case CS8:
default: mr1 |= MCFUART_MR1_CS8; break;
}
if (termios->c_cflag & PARENB) {
if (termios->c_cflag & CMSPAR) {
if (termios->c_cflag & PARODD)
mr1 |= MCFUART_MR1_PARITYMARK;
else
mr1 |= MCFUART_MR1_PARITYSPACE;
} else {
if (termios->c_cflag & PARODD)
mr1 |= MCFUART_MR1_PARITYODD;
else
mr1 |= MCFUART_MR1_PARITYEVEN;
}
} else {
mr1 |= MCFUART_MR1_PARITYNONE;
}
if (termios->c_cflag & CSTOPB)
mr2 |= MCFUART_MR2_STOP2;
else
mr2 |= MCFUART_MR2_STOP1;
if (termios->c_cflag & CRTSCTS) {
mr1 |= MCFUART_MR1_RXRTS;
mr2 |= MCFUART_MR2_TXCTS;
}
spin_lock_irqsave(&port->lock, flags);
uart_update_timeout(port, termios->c_cflag, baud);
writeb(MCFUART_UCR_CMDRESETRX, port->membase + MCFUART_UCR);
writeb(MCFUART_UCR_CMDRESETTX, port->membase + MCFUART_UCR);
writeb(MCFUART_UCR_CMDRESETMRPTR, port->membase + MCFUART_UCR);
writeb(mr1, port->membase + MCFUART_UMR);
writeb(mr2, port->membase + MCFUART_UMR);
writeb((baudclk & 0xff00) >> 8, port->membase + MCFUART_UBG1);
writeb((baudclk & 0xff), port->membase + MCFUART_UBG2);
#if defined(CONFIG_M5272)
writeb((baudfr & 0x0f), port->membase + MCFUART_UFPD);
#endif
writeb(MCFUART_UCSR_RXCLKTIMER | MCFUART_UCSR_TXCLKTIMER,
port->membase + MCFUART_UCSR);
writeb(MCFUART_UCR_RXENABLE | MCFUART_UCR_TXENABLE,
port->membase + MCFUART_UCR);
spin_unlock_irqrestore(&port->lock, flags);
}
/****************************************************************************/
static void mcf_rx_chars(struct mcf_uart *pp)
{
struct uart_port *port = &pp->port;
unsigned char status, ch, flag;
while ((status = readb(port->membase + MCFUART_USR)) & MCFUART_USR_RXREADY) {
ch = readb(port->membase + MCFUART_URB);
flag = TTY_NORMAL;
port->icount.rx++;
if (status & MCFUART_USR_RXERR) {
writeb(MCFUART_UCR_CMDRESETERR,
port->membase + MCFUART_UCR);
if (status & MCFUART_USR_RXBREAK) {
port->icount.brk++;
if (uart_handle_break(port))
continue;
} else if (status & MCFUART_USR_RXPARITY) {
port->icount.parity++;
} else if (status & MCFUART_USR_RXOVERRUN) {
port->icount.overrun++;
} else if (status & MCFUART_USR_RXFRAMING) {
port->icount.frame++;
}
status &= port->read_status_mask;
if (status & MCFUART_USR_RXBREAK)
flag = TTY_BREAK;
else if (status & MCFUART_USR_RXPARITY)
flag = TTY_PARITY;
else if (status & MCFUART_USR_RXFRAMING)
flag = TTY_FRAME;
}
if (uart_handle_sysrq_char(port, ch))
continue;
uart_insert_char(port, status, MCFUART_USR_RXOVERRUN, ch, flag);
}
tty_flip_buffer_push(port->state->port.tty);
}
/****************************************************************************/
static void mcf_tx_chars(struct mcf_uart *pp)
{
struct uart_port *port = &pp->port;
struct circ_buf *xmit = &port->state->xmit;
if (port->x_char) {
/* Send special char - probably flow control */
writeb(port->x_char, port->membase + MCFUART_UTB);
port->x_char = 0;
port->icount.tx++;
return;
}
while (readb(port->membase + MCFUART_USR) & MCFUART_USR_TXREADY) {
if (xmit->head == xmit->tail)
break;
writeb(xmit->buf[xmit->tail], port->membase + MCFUART_UTB);
xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE -1);
port->icount.tx++;
}
if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
uart_write_wakeup(port);
if (xmit->head == xmit->tail) {
pp->imr &= ~MCFUART_UIR_TXREADY;
writeb(pp->imr, port->membase + MCFUART_UIMR);
}
}
/****************************************************************************/
static irqreturn_t mcf_interrupt(int irq, void *data)
{
struct uart_port *port = data;
struct mcf_uart *pp = container_of(port, struct mcf_uart, port);
unsigned int isr;
irqreturn_t ret = IRQ_NONE;
isr = readb(port->membase + MCFUART_UISR) & pp->imr;
spin_lock(&port->lock);
if (isr & MCFUART_UIR_RXREADY) {
mcf_rx_chars(pp);
ret = IRQ_HANDLED;
}
if (isr & MCFUART_UIR_TXREADY) {
mcf_tx_chars(pp);
ret = IRQ_HANDLED;
}
spin_unlock(&port->lock);
return ret;
}
/****************************************************************************/
static void mcf_config_port(struct uart_port *port, int flags)
{
port->type = PORT_MCF;
port->fifosize = MCFUART_TXFIFOSIZE;
/* Clear mask, so no surprise interrupts. */
writeb(0, port->membase + MCFUART_UIMR);
if (request_irq(port->irq, mcf_interrupt, IRQF_DISABLED, "UART", port))
printk(KERN_ERR "MCF: unable to attach ColdFire UART %d "
"interrupt vector=%d\n", port->line, port->irq);
}
/****************************************************************************/
static const char *mcf_type(struct uart_port *port)
{
return (port->type == PORT_MCF) ? "ColdFire UART" : NULL;
}
/****************************************************************************/
static int mcf_request_port(struct uart_port *port)
{
/* UARTs always present */
return 0;
}
/****************************************************************************/
static void mcf_release_port(struct uart_port *port)
{
/* Nothing to release... */
}
/****************************************************************************/
static int mcf_verify_port(struct uart_port *port, struct serial_struct *ser)
{
if ((ser->type != PORT_UNKNOWN) && (ser->type != PORT_MCF))
return -EINVAL;
return 0;
}
/****************************************************************************/
/*
* Define the basic serial functions we support.
*/
static const struct uart_ops mcf_uart_ops = {
.tx_empty = mcf_tx_empty,
.get_mctrl = mcf_get_mctrl,
.set_mctrl = mcf_set_mctrl,
.start_tx = mcf_start_tx,
.stop_tx = mcf_stop_tx,
.stop_rx = mcf_stop_rx,
.enable_ms = mcf_enable_ms,
.break_ctl = mcf_break_ctl,
.startup = mcf_startup,
.shutdown = mcf_shutdown,
.set_termios = mcf_set_termios,
.type = mcf_type,
.request_port = mcf_request_port,
.release_port = mcf_release_port,
.config_port = mcf_config_port,
.verify_port = mcf_verify_port,
};
static struct mcf_uart mcf_ports[4];
#define MCF_MAXPORTS ARRAY_SIZE(mcf_ports)
/****************************************************************************/
#if defined(CONFIG_SERIAL_MCF_CONSOLE)
/****************************************************************************/
int __init early_mcf_setup(struct mcf_platform_uart *platp)
{
struct uart_port *port;
int i;
for (i = 0; ((i < MCF_MAXPORTS) && (platp[i].mapbase)); i++) {
port = &mcf_ports[i].port;
port->line = i;
port->type = PORT_MCF;
port->mapbase = platp[i].mapbase;
port->membase = (platp[i].membase) ? platp[i].membase :
(unsigned char __iomem *) port->mapbase;
port->iotype = SERIAL_IO_MEM;
port->irq = platp[i].irq;
port->uartclk = MCF_BUSCLK;
port->flags = ASYNC_BOOT_AUTOCONF;
port->ops = &mcf_uart_ops;
}
return 0;
}
/****************************************************************************/
static void mcf_console_putc(struct console *co, const char c)
{
struct uart_port *port = &(mcf_ports + co->index)->port;
int i;
for (i = 0; (i < 0x10000); i++) {
if (readb(port->membase + MCFUART_USR) & MCFUART_USR_TXREADY)
break;
}
writeb(c, port->membase + MCFUART_UTB);
for (i = 0; (i < 0x10000); i++) {
if (readb(port->membase + MCFUART_USR) & MCFUART_USR_TXREADY)
break;
}
}
/****************************************************************************/
static void mcf_console_write(struct console *co, const char *s, unsigned int count)
{
for (; (count); count--, s++) {
mcf_console_putc(co, *s);
if (*s == '\n')
mcf_console_putc(co, '\r');
}
}
/****************************************************************************/
static int __init mcf_console_setup(struct console *co, char *options)
{
struct uart_port *port;
int baud = CONFIG_SERIAL_MCF_BAUDRATE;
int bits = 8;
int parity = 'n';
int flow = 'n';
if ((co->index < 0) || (co->index >= MCF_MAXPORTS))
co->index = 0;
port = &mcf_ports[co->index].port;
if (port->membase == 0)
return -ENODEV;
if (options)
uart_parse_options(options, &baud, &parity, &bits, &flow);
return uart_set_options(port, co, baud, parity, bits, flow);
}
/****************************************************************************/
static struct uart_driver mcf_driver;
static struct console mcf_console = {
.name = "ttyS",
.write = mcf_console_write,
.device = uart_console_device,
.setup = mcf_console_setup,
.flags = CON_PRINTBUFFER,
.index = -1,
.data = &mcf_driver,
};
static int __init mcf_console_init(void)
{
register_console(&mcf_console);
return 0;
}
console_initcall(mcf_console_init);
#define MCF_CONSOLE &mcf_console
/****************************************************************************/
#else
/****************************************************************************/
#define MCF_CONSOLE NULL
/****************************************************************************/
#endif /* CONFIG_MCF_CONSOLE */
/****************************************************************************/
/*
* Define the mcf UART driver structure.
*/
static struct uart_driver mcf_driver = {
.owner = THIS_MODULE,
.driver_name = "mcf",
.dev_name = "ttyS",
.major = TTY_MAJOR,
.minor = 64,
.nr = MCF_MAXPORTS,
.cons = MCF_CONSOLE,
};
/****************************************************************************/
static int __devinit mcf_probe(struct platform_device *pdev)
{
struct mcf_platform_uart *platp = pdev->dev.platform_data;
struct uart_port *port;
int i;
for (i = 0; ((i < MCF_MAXPORTS) && (platp[i].mapbase)); i++) {
port = &mcf_ports[i].port;
port->line = i;
port->type = PORT_MCF;
port->mapbase = platp[i].mapbase;
port->membase = (platp[i].membase) ? platp[i].membase :
(unsigned char __iomem *) platp[i].mapbase;
port->iotype = SERIAL_IO_MEM;
port->irq = platp[i].irq;
port->uartclk = MCF_BUSCLK;
port->ops = &mcf_uart_ops;
port->flags = ASYNC_BOOT_AUTOCONF;
uart_add_one_port(&mcf_driver, port);
}
return 0;
}
/****************************************************************************/
static int __devexit mcf_remove(struct platform_device *pdev)
{
struct uart_port *port;
int i;
for (i = 0; (i < MCF_MAXPORTS); i++) {
port = &mcf_ports[i].port;
if (port)
uart_remove_one_port(&mcf_driver, port);
}
return 0;
}
/****************************************************************************/
static struct platform_driver mcf_platform_driver = {
.probe = mcf_probe,
.remove = __devexit_p(mcf_remove),
.driver = {
.name = "mcfuart",
.owner = THIS_MODULE,
},
};
/****************************************************************************/
static int __init mcf_init(void)
{
int rc;
printk("ColdFire internal UART serial driver\n");
rc = uart_register_driver(&mcf_driver);
if (rc)
return rc;
rc = platform_driver_register(&mcf_platform_driver);
if (rc)
return rc;
return 0;
}
/****************************************************************************/
static void __exit mcf_exit(void)
{
platform_driver_unregister(&mcf_platform_driver);
uart_unregister_driver(&mcf_driver);
}
/****************************************************************************/
module_init(mcf_init);
module_exit(mcf_exit);
MODULE_AUTHOR("Greg Ungerer <gerg@snapgear.com>");
MODULE_DESCRIPTION("Freescale ColdFire UART driver");
MODULE_LICENSE("GPL");
MODULE_ALIAS("platform:mcfuart");
/****************************************************************************/