- 根目录:
- drivers
- staging
- speakup
- speakup_dtlk.h
/* speakup_dtlk.h - header file for speakups DoubleTalk driver. */
#define SYNTH_IO_EXTENT 0x02
#define SYNTH_CLEAR 0x18 /* stops speech */
/* TTS Port Status Flags */
#define TTS_READABLE 0x80 /* mask for bit which is nonzero if a
byte can be read from the TTS port */
#define TTS_SPEAKING 0x40 /* mask for SYNC bit, which is nonzero
while DoubleTalk is producing
output with TTS, PCM or CVSD
synthesizers or tone generators
(that is, all but LPC) */
#define TTS_SPEAKING2 0x20 /* mask for SYNC2 bit,
which falls to zero up to 0.4 sec
before speech stops */
#define TTS_WRITABLE 0x10 /* mask for RDY bit, which when set to
1, indicates the TTS port is ready
to accept a byte of data. The RDY
bit goes zero 2-3 usec after
writing, and goes 1 again 180-190
usec later. */
#define TTS_ALMOST_FULL 0x08 /* mask for AF bit: When set to 1,
indicates that less than 300 bytes
are available in the TTS input
buffer. AF is always 0 in the PCM,
TGN and CVSD modes. */
#define TTS_ALMOST_EMPTY 0x04 /* mask for AE bit: When set to 1,
indicates that less than 300 bytes
are remaining in DoubleTalk's input
(TTS or PCM) buffer. AE is always 1
in the TGN and CVSD modes. */
/* data returned by Interrogate command */
struct synth_settings {
u_short serial_number; /* 0-7Fh:0-7Fh */
u_char rom_version[24]; /* null terminated string */
u_char mode; /* 0=Character; 1=Phoneme; 2=Text */
u_char punc_level; /* nB; 0-7 */
u_char formant_freq; /* nF; 0-9 */
u_char pitch; /* nP; 0-99 */
u_char speed; /* nS; 0-9 */
u_char volume; /* nV; 0-9 */
u_char tone; /* nX; 0-2 */
u_char expression; /* nE; 0-9 */
u_char ext_dict_loaded; /* 1=exception dictionary loaded */
u_char ext_dict_status; /* 1=exception dictionary enabled */
u_char free_ram; /* # pages (truncated) remaining for
* text buffer */
u_char articulation; /* nA; 0-9 */
u_char reverb; /* nR; 0-9 */
u_char eob; /* 7Fh value indicating end of
* parameter block */
u_char has_indexing; /* nonzero if indexing is implemented */
};