- 根目录:
- drivers
- staging
- gma500
- psb_powermgmt.c
/**************************************************************************
* Copyright (c) 2009, Intel Corporation.
* All Rights Reserved.
* Permission is hereby granted, free of charge, to any person obtaining a
* copy of this software and associated documentation files (the "Software"),
* to deal in the Software without restriction, including without limitation
* the rights to use, copy, modify, merge, publish, distribute, sublicense,
* and/or sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice (including the next
* paragraph) shall be included in all copies or substantial portions of the
* Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
* THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
* SOFTWARE.
*
* Authors:
* Benjamin Defnet <benjamin.r.defnet@intel.com>
* Rajesh Poornachandran <rajesh.poornachandran@intel.com>
*
*/
#include "psb_powermgmt.h"
#include "psb_drv.h"
#include "psb_intel_reg.h"
#include <linux/mutex.h>
#include <linux/pm_runtime.h>
#undef OSPM_GFX_DPK
extern u32 gui32SGXDeviceID;
extern u32 gui32MRSTDisplayDeviceID;
extern u32 gui32MRSTMSVDXDeviceID;
extern u32 gui32MRSTTOPAZDeviceID;
struct drm_device *gpDrmDevice = NULL;
static struct mutex power_mutex;
static bool gbSuspendInProgress = false;
static bool gbResumeInProgress = false;
static int g_hw_power_status_mask;
static atomic_t g_display_access_count;
static atomic_t g_graphics_access_count;
static atomic_t g_videoenc_access_count;
static atomic_t g_videodec_access_count;
int allow_runtime_pm = 0;
void ospm_power_island_up(int hw_islands);
void ospm_power_island_down(int hw_islands);
static bool gbSuspended = false;
bool gbgfxsuspended = false;
/*
* ospm_power_init
*
* Description: Initialize this ospm power management module
*/
void ospm_power_init(struct drm_device *dev)
{
struct drm_psb_private *dev_priv = (struct drm_psb_private *)dev->dev_private;
gpDrmDevice = dev;
dev_priv->apm_base = dev_priv->apm_reg & 0xffff;
dev_priv->ospm_base &= 0xffff;
mutex_init(&power_mutex);
g_hw_power_status_mask = OSPM_ALL_ISLANDS;
atomic_set(&g_display_access_count, 0);
atomic_set(&g_graphics_access_count, 0);
atomic_set(&g_videoenc_access_count, 0);
atomic_set(&g_videodec_access_count, 0);
}
/*
* ospm_power_uninit
*
* Description: Uninitialize this ospm power management module
*/
void ospm_power_uninit(void)
{
mutex_destroy(&power_mutex);
pm_runtime_disable(&gpDrmDevice->pdev->dev);
pm_runtime_set_suspended(&gpDrmDevice->pdev->dev);
}
/*
* save_display_registers
*
* Description: We are going to suspend so save current display
* register state.
*/
static int save_display_registers(struct drm_device *dev)
{
struct drm_psb_private *dev_priv = dev->dev_private;
struct drm_crtc * crtc;
struct drm_connector * connector;
/* Display arbitration control + watermarks */
dev_priv->saveDSPARB = PSB_RVDC32(DSPARB);
dev_priv->saveDSPFW1 = PSB_RVDC32(DSPFW1);
dev_priv->saveDSPFW2 = PSB_RVDC32(DSPFW2);
dev_priv->saveDSPFW3 = PSB_RVDC32(DSPFW3);
dev_priv->saveDSPFW4 = PSB_RVDC32(DSPFW4);
dev_priv->saveDSPFW5 = PSB_RVDC32(DSPFW5);
dev_priv->saveDSPFW6 = PSB_RVDC32(DSPFW6);
dev_priv->saveCHICKENBIT = PSB_RVDC32(DSPCHICKENBIT);
/*save crtc and output state*/
mutex_lock(&dev->mode_config.mutex);
list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
if(drm_helper_crtc_in_use(crtc)) {
crtc->funcs->save(crtc);
}
}
list_for_each_entry(connector, &dev->mode_config.connector_list, head) {
connector->funcs->save(connector);
}
mutex_unlock(&dev->mode_config.mutex);
/* Interrupt state */
/*
* Handled in psb_irq.c
*/
return 0;
}
/*
* restore_display_registers
*
* Description: We are going to resume so restore display register state.
*/
static int restore_display_registers(struct drm_device *dev)
{
struct drm_psb_private *dev_priv = dev->dev_private;
struct drm_crtc * crtc;
struct drm_connector * connector;
/* Display arbitration + watermarks */
PSB_WVDC32(dev_priv->saveDSPARB, DSPARB);
PSB_WVDC32(dev_priv->saveDSPFW1, DSPFW1);
PSB_WVDC32(dev_priv->saveDSPFW2, DSPFW2);
PSB_WVDC32(dev_priv->saveDSPFW3, DSPFW3);
PSB_WVDC32(dev_priv->saveDSPFW4, DSPFW4);
PSB_WVDC32(dev_priv->saveDSPFW5, DSPFW5);
PSB_WVDC32(dev_priv->saveDSPFW6, DSPFW6);
PSB_WVDC32(dev_priv->saveCHICKENBIT, DSPCHICKENBIT);
/*make sure VGA plane is off. it initializes to on after reset!*/
PSB_WVDC32(0x80000000, VGACNTRL);
mutex_lock(&dev->mode_config.mutex);
list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
if(drm_helper_crtc_in_use(crtc))
crtc->funcs->restore(crtc);
}
list_for_each_entry(connector, &dev->mode_config.connector_list, head) {
connector->funcs->restore(connector);
}
mutex_unlock(&dev->mode_config.mutex);
/*Interrupt state*/
/*
* Handled in psb_irq.c
*/
return 0;
}
/*
* powermgmt_suspend_display
*
* Description: Suspend the display hardware saving state and disabling
* as necessary.
*/
void ospm_suspend_display(struct drm_device *dev)
{
struct drm_psb_private *dev_priv = dev->dev_private;
int pp_stat, ret=0;
printk(KERN_ALERT "%s \n", __func__);
#ifdef OSPM_GFX_DPK
printk(KERN_ALERT "%s \n", __func__);
#endif
if (!(g_hw_power_status_mask & OSPM_DISPLAY_ISLAND))
return;
save_display_registers(dev);
if (dev_priv->iLVDS_enable) {
/*shutdown the panel*/
PSB_WVDC32(0, PP_CONTROL);
do {
pp_stat = PSB_RVDC32(PP_STATUS);
} while (pp_stat & 0x80000000);
/*turn off the plane*/
PSB_WVDC32(0x58000000, DSPACNTR);
PSB_WVDC32(0, DSPASURF);/*trigger the plane disable*/
/*wait ~4 ticks*/
msleep(4);
/*turn off pipe*/
PSB_WVDC32(0x0, PIPEACONF);
/*wait ~8 ticks*/
msleep(8);
/*turn off PLLs*/
PSB_WVDC32(0, MRST_DPLL_A);
} else {
PSB_WVDC32(DPI_SHUT_DOWN, DPI_CONTROL_REG);
PSB_WVDC32(0x0, PIPEACONF);
PSB_WVDC32(0x2faf0000, BLC_PWM_CTL);
while (REG_READ(0x70008) & 0x40000000);
while ((PSB_RVDC32(GEN_FIFO_STAT_REG) & DPI_FIFO_EMPTY)
!= DPI_FIFO_EMPTY);
PSB_WVDC32(0, DEVICE_READY_REG);
/* turn off panel power */
ret = 0;
}
ospm_power_island_down(OSPM_DISPLAY_ISLAND);
}
/*
* ospm_resume_display
*
* Description: Resume the display hardware restoring state and enabling
* as necessary.
*/
void ospm_resume_display(struct pci_dev *pdev)
{
struct drm_device *dev = pci_get_drvdata(pdev);
struct drm_psb_private *dev_priv = dev->dev_private;
struct psb_gtt *pg = dev_priv->pg;
printk(KERN_ALERT "%s \n", __func__);
#ifdef OSPM_GFX_DPK
printk(KERN_ALERT "%s \n", __func__);
#endif
if (g_hw_power_status_mask & OSPM_DISPLAY_ISLAND)
return;
/* turn on the display power island */
ospm_power_island_up(OSPM_DISPLAY_ISLAND);
PSB_WVDC32(pg->pge_ctl | _PSB_PGETBL_ENABLED, PSB_PGETBL_CTL);
pci_write_config_word(pdev, PSB_GMCH_CTRL,
pg->gmch_ctrl | _PSB_GMCH_ENABLED);
/* Don't reinitialize the GTT as it is unnecessary. The gtt is
* stored in memory so it will automatically be restored. All
* we need to do is restore the PGETBL_CTL which we already do
* above.
*/
/*psb_gtt_init(dev_priv->pg, 1);*/
restore_display_registers(dev);
}
#if 1
/*
* ospm_suspend_pci
*
* Description: Suspend the pci device saving state and disabling
* as necessary.
*/
static void ospm_suspend_pci(struct pci_dev *pdev)
{
struct drm_device *dev = pci_get_drvdata(pdev);
struct drm_psb_private *dev_priv = dev->dev_private;
int bsm, vbt;
if (gbSuspended)
return;
#ifdef OSPM_GFX_DPK
printk(KERN_ALERT "ospm_suspend_pci\n");
#endif
pci_save_state(pdev);
pci_read_config_dword(pdev, 0x5C, &bsm);
dev_priv->saveBSM = bsm;
pci_read_config_dword(pdev, 0xFC, &vbt);
dev_priv->saveVBT = vbt;
pci_read_config_dword(pdev, PSB_PCIx_MSI_ADDR_LOC, &dev_priv->msi_addr);
pci_read_config_dword(pdev, PSB_PCIx_MSI_DATA_LOC, &dev_priv->msi_data);
pci_disable_device(pdev);
pci_set_power_state(pdev, PCI_D3hot);
gbSuspended = true;
gbgfxsuspended = true;
}
/*
* ospm_resume_pci
*
* Description: Resume the pci device restoring state and enabling
* as necessary.
*/
static bool ospm_resume_pci(struct pci_dev *pdev)
{
struct drm_device *dev = pci_get_drvdata(pdev);
struct drm_psb_private *dev_priv = dev->dev_private;
int ret = 0;
if (!gbSuspended)
return true;
#ifdef OSPM_GFX_DPK
printk(KERN_ALERT "ospm_resume_pci\n");
#endif
pci_set_power_state(pdev, PCI_D0);
pci_restore_state(pdev);
pci_write_config_dword(pdev, 0x5c, dev_priv->saveBSM);
pci_write_config_dword(pdev, 0xFC, dev_priv->saveVBT);
/* retoring MSI address and data in PCIx space */
pci_write_config_dword(pdev, PSB_PCIx_MSI_ADDR_LOC, dev_priv->msi_addr);
pci_write_config_dword(pdev, PSB_PCIx_MSI_DATA_LOC, dev_priv->msi_data);
ret = pci_enable_device(pdev);
if (ret != 0)
printk(KERN_ALERT "ospm_resume_pci: pci_enable_device failed: %d\n", ret);
else
gbSuspended = false;
return !gbSuspended;
}
#endif
/*
* ospm_power_suspend
*
* Description: OSPM is telling our driver to suspend so save state
* and power down all hardware.
*/
int ospm_power_suspend(struct pci_dev *pdev, pm_message_t state)
{
int ret = 0;
int graphics_access_count;
int videoenc_access_count;
int videodec_access_count;
int display_access_count;
bool suspend_pci = true;
if(gbSuspendInProgress || gbResumeInProgress)
{
#ifdef OSPM_GFX_DPK
printk(KERN_ALERT "OSPM_GFX_DPK: %s system BUSY \n", __func__);
#endif
return -EBUSY;
}
mutex_lock(&power_mutex);
if (!gbSuspended) {
graphics_access_count = atomic_read(&g_graphics_access_count);
videoenc_access_count = atomic_read(&g_videoenc_access_count);
videodec_access_count = atomic_read(&g_videodec_access_count);
display_access_count = atomic_read(&g_display_access_count);
if (graphics_access_count ||
videoenc_access_count ||
videodec_access_count ||
display_access_count)
ret = -EBUSY;
if (!ret) {
gbSuspendInProgress = true;
psb_irq_uninstall_islands(gpDrmDevice, OSPM_DISPLAY_ISLAND);
ospm_suspend_display(gpDrmDevice);
if (suspend_pci == true) {
ospm_suspend_pci(pdev);
}
gbSuspendInProgress = false;
} else {
printk(KERN_ALERT "ospm_power_suspend: device busy: graphics %d videoenc %d videodec %d display %d\n", graphics_access_count, videoenc_access_count, videodec_access_count, display_access_count);
}
}
mutex_unlock(&power_mutex);
return ret;
}
/*
* ospm_power_island_up
*
* Description: Restore power to the specified island(s) (powergating)
*/
void ospm_power_island_up(int hw_islands)
{
u32 pwr_cnt = 0;
u32 pwr_sts = 0;
u32 pwr_mask = 0;
struct drm_psb_private *dev_priv =
(struct drm_psb_private *) gpDrmDevice->dev_private;
if (hw_islands & OSPM_DISPLAY_ISLAND) {
pwr_mask = PSB_PWRGT_DISPLAY_MASK;
pwr_cnt = inl(dev_priv->ospm_base + PSB_PM_SSC);
pwr_cnt &= ~pwr_mask;
outl(pwr_cnt, (dev_priv->ospm_base + PSB_PM_SSC));
while (true) {
pwr_sts = inl(dev_priv->ospm_base + PSB_PM_SSS);
if ((pwr_sts & pwr_mask) == 0)
break;
else
udelay(10);
}
}
g_hw_power_status_mask |= hw_islands;
}
/*
* ospm_power_resume
*/
int ospm_power_resume(struct pci_dev *pdev)
{
if(gbSuspendInProgress || gbResumeInProgress)
{
#ifdef OSPM_GFX_DPK
printk(KERN_ALERT "OSPM_GFX_DPK: %s hw_island: Suspend || gbResumeInProgress!!!! \n", __func__);
#endif
return 0;
}
mutex_lock(&power_mutex);
#ifdef OSPM_GFX_DPK
printk(KERN_ALERT "OSPM_GFX_DPK: ospm_power_resume \n");
#endif
gbResumeInProgress = true;
ospm_resume_pci(pdev);
ospm_resume_display(gpDrmDevice->pdev);
psb_irq_preinstall_islands(gpDrmDevice, OSPM_DISPLAY_ISLAND);
psb_irq_postinstall_islands(gpDrmDevice, OSPM_DISPLAY_ISLAND);
gbResumeInProgress = false;
mutex_unlock(&power_mutex);
return 0;
}
/*
* ospm_power_island_down
*
* Description: Cut power to the specified island(s) (powergating)
*/
void ospm_power_island_down(int islands)
{
#if 0
u32 pwr_cnt = 0;
u32 pwr_mask = 0;
u32 pwr_sts = 0;
struct drm_psb_private *dev_priv =
(struct drm_psb_private *) gpDrmDevice->dev_private;
g_hw_power_status_mask &= ~islands;
if (islands & OSPM_GRAPHICS_ISLAND) {
pwr_cnt |= PSB_PWRGT_GFX_MASK;
pwr_mask |= PSB_PWRGT_GFX_MASK;
if (dev_priv->graphics_state == PSB_PWR_STATE_ON) {
dev_priv->gfx_on_time += (jiffies - dev_priv->gfx_last_mode_change) * 1000 / HZ;
dev_priv->gfx_last_mode_change = jiffies;
dev_priv->graphics_state = PSB_PWR_STATE_OFF;
dev_priv->gfx_off_cnt++;
}
}
if (islands & OSPM_VIDEO_ENC_ISLAND) {
pwr_cnt |= PSB_PWRGT_VID_ENC_MASK;
pwr_mask |= PSB_PWRGT_VID_ENC_MASK;
}
if (islands & OSPM_VIDEO_DEC_ISLAND) {
pwr_cnt |= PSB_PWRGT_VID_DEC_MASK;
pwr_mask |= PSB_PWRGT_VID_DEC_MASK;
}
if (pwr_cnt) {
pwr_cnt |= inl(dev_priv->apm_base);
outl(pwr_cnt, dev_priv->apm_base + PSB_APM_CMD);
while (true) {
pwr_sts = inl(dev_priv->apm_base + PSB_APM_STS);
if ((pwr_sts & pwr_mask) == pwr_mask)
break;
else
udelay(10);
}
}
if (islands & OSPM_DISPLAY_ISLAND) {
pwr_mask = PSB_PWRGT_DISPLAY_MASK;
outl(pwr_mask, (dev_priv->ospm_base + PSB_PM_SSC));
while (true) {
pwr_sts = inl(dev_priv->ospm_base + PSB_PM_SSS);
if ((pwr_sts & pwr_mask) == pwr_mask)
break;
else
udelay(10);
}
}
#endif
}
/*
* ospm_power_is_hw_on
*
* Description: do an instantaneous check for if the specified islands
* are on. Only use this in cases where you know the g_state_change_mutex
* is already held such as in irq install/uninstall. Otherwise, use
* ospm_power_using_hw_begin().
*/
bool ospm_power_is_hw_on(int hw_islands)
{
return ((g_hw_power_status_mask & hw_islands) == hw_islands) ? true:false;
}
/*
* ospm_power_using_hw_begin
*
* Description: Notify PowerMgmt module that you will be accessing the
* specified island's hw so don't power it off. If force_on is true,
* this will power on the specified island if it is off.
* Otherwise, this will return false and the caller is expected to not
* access the hw.
*
* NOTE *** If this is called from and interrupt handler or other atomic
* context, then it will return false if we are in the middle of a
* power state transition and the caller will be expected to handle that
* even if force_on is set to true.
*/
bool ospm_power_using_hw_begin(int hw_island, UHBUsage usage)
{
return 1; /*FIXMEAC */
#if 0
bool ret = true;
bool island_is_off = false;
bool b_atomic = (in_interrupt() || in_atomic());
bool locked = true;
struct pci_dev *pdev = gpDrmDevice->pdev;
u32 deviceID = 0;
bool force_on = usage ? true: false;
/*quick path, not 100% race safe, but should be enough comapre to current other code in this file */
if (!force_on) {
if (hw_island & (OSPM_ALL_ISLANDS & ~g_hw_power_status_mask))
return false;
else {
locked = false;
#ifdef CONFIG_PM_RUNTIME
/* increment pm_runtime_refcount */
pm_runtime_get(&pdev->dev);
#endif
goto increase_count;
}
}
if (!b_atomic)
mutex_lock(&power_mutex);
island_is_off = hw_island & (OSPM_ALL_ISLANDS & ~g_hw_power_status_mask);
if (b_atomic && (gbSuspendInProgress || gbResumeInProgress || gbSuspended) && force_on && island_is_off)
ret = false;
if (ret && island_is_off && !force_on)
ret = false;
if (ret && island_is_off && force_on) {
gbResumeInProgress = true;
ret = ospm_resume_pci(pdev);
if (ret) {
switch(hw_island)
{
case OSPM_DISPLAY_ISLAND:
deviceID = gui32MRSTDisplayDeviceID;
ospm_resume_display(pdev);
psb_irq_preinstall_islands(gpDrmDevice, OSPM_DISPLAY_ISLAND);
psb_irq_postinstall_islands(gpDrmDevice, OSPM_DISPLAY_ISLAND);
break;
case OSPM_GRAPHICS_ISLAND:
deviceID = gui32SGXDeviceID;
ospm_power_island_up(OSPM_GRAPHICS_ISLAND);
psb_irq_preinstall_islands(gpDrmDevice, OSPM_GRAPHICS_ISLAND);
psb_irq_postinstall_islands(gpDrmDevice, OSPM_GRAPHICS_ISLAND);
break;
#if 1
case OSPM_VIDEO_DEC_ISLAND:
if(!ospm_power_is_hw_on(OSPM_DISPLAY_ISLAND)) {
//printk(KERN_ALERT "%s power on display for video decode use\n", __func__);
deviceID = gui32MRSTDisplayDeviceID;
ospm_resume_display(pdev);
psb_irq_preinstall_islands(gpDrmDevice, OSPM_DISPLAY_ISLAND);
psb_irq_postinstall_islands(gpDrmDevice, OSPM_DISPLAY_ISLAND);
}
else{
//printk(KERN_ALERT "%s display is already on for video decode use\n", __func__);
}
if(!ospm_power_is_hw_on(OSPM_VIDEO_DEC_ISLAND)) {
//printk(KERN_ALERT "%s power on video decode\n", __func__);
deviceID = gui32MRSTMSVDXDeviceID;
ospm_power_island_up(OSPM_VIDEO_DEC_ISLAND);
psb_irq_preinstall_islands(gpDrmDevice, OSPM_VIDEO_DEC_ISLAND);
psb_irq_postinstall_islands(gpDrmDevice, OSPM_VIDEO_DEC_ISLAND);
}
else{
//printk(KERN_ALERT "%s video decode is already on\n", __func__);
}
break;
case OSPM_VIDEO_ENC_ISLAND:
if(!ospm_power_is_hw_on(OSPM_DISPLAY_ISLAND)) {
//printk(KERN_ALERT "%s power on display for video encode\n", __func__);
deviceID = gui32MRSTDisplayDeviceID;
ospm_resume_display(pdev);
psb_irq_preinstall_islands(gpDrmDevice, OSPM_DISPLAY_ISLAND);
psb_irq_postinstall_islands(gpDrmDevice, OSPM_DISPLAY_ISLAND);
}
else{
//printk(KERN_ALERT "%s display is already on for video encode use\n", __func__);
}
if(!ospm_power_is_hw_on(OSPM_VIDEO_ENC_ISLAND)) {
//printk(KERN_ALERT "%s power on video encode\n", __func__);
deviceID = gui32MRSTTOPAZDeviceID;
ospm_power_island_up(OSPM_VIDEO_ENC_ISLAND);
psb_irq_preinstall_islands(gpDrmDevice, OSPM_VIDEO_ENC_ISLAND);
psb_irq_postinstall_islands(gpDrmDevice, OSPM_VIDEO_ENC_ISLAND);
}
else{
//printk(KERN_ALERT "%s video decode is already on\n", __func__);
}
#endif
break;
default:
printk(KERN_ALERT "%s unknown island !!!! \n", __func__);
break;
}
}
if (!ret)
printk(KERN_ALERT "ospm_power_using_hw_begin: forcing on %d failed\n", hw_island);
gbResumeInProgress = false;
}
increase_count:
if (ret) {
switch(hw_island)
{
case OSPM_GRAPHICS_ISLAND:
atomic_inc(&g_graphics_access_count);
break;
case OSPM_VIDEO_ENC_ISLAND:
atomic_inc(&g_videoenc_access_count);
break;
case OSPM_VIDEO_DEC_ISLAND:
atomic_inc(&g_videodec_access_count);
break;
case OSPM_DISPLAY_ISLAND:
atomic_inc(&g_display_access_count);
break;
}
}
if (!b_atomic && locked)
mutex_unlock(&power_mutex);
return ret;
#endif
}
/*
* ospm_power_using_hw_end
*
* Description: Notify PowerMgmt module that you are done accessing the
* specified island's hw so feel free to power it off. Note that this
* function doesn't actually power off the islands.
*/
void ospm_power_using_hw_end(int hw_island)
{
#if 0 /* FIXMEAC */
switch(hw_island)
{
case OSPM_GRAPHICS_ISLAND:
atomic_dec(&g_graphics_access_count);
break;
case OSPM_VIDEO_ENC_ISLAND:
atomic_dec(&g_videoenc_access_count);
break;
case OSPM_VIDEO_DEC_ISLAND:
atomic_dec(&g_videodec_access_count);
break;
case OSPM_DISPLAY_ISLAND:
atomic_dec(&g_display_access_count);
break;
}
//decrement runtime pm ref count
pm_runtime_put(&gpDrmDevice->pdev->dev);
WARN_ON(atomic_read(&g_graphics_access_count) < 0);
WARN_ON(atomic_read(&g_videoenc_access_count) < 0);
WARN_ON(atomic_read(&g_videodec_access_count) < 0);
WARN_ON(atomic_read(&g_display_access_count) < 0);
#endif
}
int ospm_runtime_pm_allow(struct drm_device * dev)
{
return 0;
}
void ospm_runtime_pm_forbid(struct drm_device * dev)
{
struct drm_psb_private * dev_priv = dev->dev_private;
DRM_INFO("%s\n", __FUNCTION__);
pm_runtime_forbid(&dev->pdev->dev);
dev_priv->rpm_enabled = 0;
}
int psb_runtime_suspend(struct device *dev)
{
pm_message_t state;
int ret = 0;
state.event = 0;
#ifdef OSPM_GFX_DPK
printk(KERN_ALERT "OSPM_GFX_DPK: %s \n", __func__);
#endif
if (atomic_read(&g_graphics_access_count) || atomic_read(&g_videoenc_access_count)
|| atomic_read(&g_videodec_access_count) || atomic_read(&g_display_access_count)){
#ifdef OSPM_GFX_DPK
printk(KERN_ALERT "OSPM_GFX_DPK: GFX: %d VEC: %d VED: %d DC: %d DSR: %d \n", atomic_read(&g_graphics_access_count),
atomic_read(&g_videoenc_access_count), atomic_read(&g_videodec_access_count), atomic_read(&g_display_access_count));
#endif
return -EBUSY;
}
else
ret = ospm_power_suspend(gpDrmDevice->pdev, state);
return ret;
}
int psb_runtime_resume(struct device *dev)
{
return 0;
}
int psb_runtime_idle(struct device *dev)
{
/*printk (KERN_ALERT "lvds:%d,mipi:%d\n", dev_priv->is_lvds_on, dev_priv->is_mipi_on);*/
if (atomic_read(&g_graphics_access_count) || atomic_read(&g_videoenc_access_count)
|| atomic_read(&g_videodec_access_count) || atomic_read(&g_display_access_count))
return 1;
else
return 0;
}