- 根目录:
- drivers
- net
- wireless
- wl12xx
- rx.c
/*
* This file is part of wl1271
*
* Copyright (C) 2009 Nokia Corporation
*
* Contact: Luciano Coelho <luciano.coelho@nokia.com>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* version 2 as published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
* 02110-1301 USA
*
*/
#include <linux/gfp.h>
#include "wl12xx.h"
#include "acx.h"
#include "reg.h"
#include "rx.h"
#include "io.h"
static u8 wl1271_rx_get_mem_block(struct wl1271_fw_common_status *status,
u32 drv_rx_counter)
{
return le32_to_cpu(status->rx_pkt_descs[drv_rx_counter]) &
RX_MEM_BLOCK_MASK;
}
static u32 wl1271_rx_get_buf_size(struct wl1271_fw_common_status *status,
u32 drv_rx_counter)
{
return (le32_to_cpu(status->rx_pkt_descs[drv_rx_counter]) &
RX_BUF_SIZE_MASK) >> RX_BUF_SIZE_SHIFT_DIV;
}
static void wl1271_rx_status(struct wl1271 *wl,
struct wl1271_rx_descriptor *desc,
struct ieee80211_rx_status *status,
u8 beacon)
{
enum ieee80211_band desc_band;
memset(status, 0, sizeof(struct ieee80211_rx_status));
status->band = wl->band;
if ((desc->flags & WL1271_RX_DESC_BAND_MASK) == WL1271_RX_DESC_BAND_BG)
desc_band = IEEE80211_BAND_2GHZ;
else
desc_band = IEEE80211_BAND_5GHZ;
status->rate_idx = wl1271_rate_to_idx(desc->rate, desc_band);
#ifdef CONFIG_WL12XX_HT
/* 11n support */
if (desc->rate <= CONF_HW_RXTX_RATE_MCS0)
status->flag |= RX_FLAG_HT;
#endif
status->signal = desc->rssi;
/*
* FIXME: In wl1251, the SNR should be divided by two. In wl1271 we
* need to divide by two for now, but TI has been discussing about
* changing it. This needs to be rechecked.
*/
wl->noise = desc->rssi - (desc->snr >> 1);
status->freq = ieee80211_channel_to_frequency(desc->channel, desc_band);
if (desc->flags & WL1271_RX_DESC_ENCRYPT_MASK) {
status->flag |= RX_FLAG_IV_STRIPPED | RX_FLAG_MMIC_STRIPPED;
if (likely(!(desc->status & WL1271_RX_DESC_DECRYPT_FAIL)))
status->flag |= RX_FLAG_DECRYPTED;
if (unlikely(desc->status & WL1271_RX_DESC_MIC_FAIL))
status->flag |= RX_FLAG_MMIC_ERROR;
}
}
static int wl1271_rx_handle_data(struct wl1271 *wl, u8 *data, u32 length)
{
struct wl1271_rx_descriptor *desc;
struct sk_buff *skb;
struct ieee80211_hdr *hdr;
u8 *buf;
u8 beacon = 0;
/*
* In PLT mode we seem to get frames and mac80211 warns about them,
* workaround this by not retrieving them at all.
*/
if (unlikely(wl->state == WL1271_STATE_PLT))
return -EINVAL;
skb = __dev_alloc_skb(length, GFP_KERNEL);
if (!skb) {
wl1271_error("Couldn't allocate RX frame");
return -ENOMEM;
}
buf = skb_put(skb, length);
memcpy(buf, data, length);
/* the data read starts with the descriptor */
desc = (struct wl1271_rx_descriptor *) buf;
/* now we pull the descriptor out of the buffer */
skb_pull(skb, sizeof(*desc));
hdr = (struct ieee80211_hdr *)skb->data;
if (ieee80211_is_beacon(hdr->frame_control))
beacon = 1;
wl1271_rx_status(wl, desc, IEEE80211_SKB_RXCB(skb), beacon);
wl1271_debug(DEBUG_RX, "rx skb 0x%p: %d B %s", skb, skb->len,
beacon ? "beacon" : "");
skb_trim(skb, skb->len - desc->pad_len);
skb_queue_tail(&wl->deferred_rx_queue, skb);
ieee80211_queue_work(wl->hw, &wl->netstack_work);
return 0;
}
void wl1271_rx(struct wl1271 *wl, struct wl1271_fw_common_status *status)
{
struct wl1271_acx_mem_map *wl_mem_map = wl->target_mem_map;
u32 buf_size;
u32 fw_rx_counter = status->fw_rx_counter & NUM_RX_PKT_DESC_MOD_MASK;
u32 drv_rx_counter = wl->rx_counter & NUM_RX_PKT_DESC_MOD_MASK;
u32 rx_counter;
u32 mem_block;
u32 pkt_length;
u32 pkt_offset;
while (drv_rx_counter != fw_rx_counter) {
buf_size = 0;
rx_counter = drv_rx_counter;
while (rx_counter != fw_rx_counter) {
pkt_length = wl1271_rx_get_buf_size(status, rx_counter);
if (buf_size + pkt_length > WL1271_AGGR_BUFFER_SIZE)
break;
buf_size += pkt_length;
rx_counter++;
rx_counter &= NUM_RX_PKT_DESC_MOD_MASK;
}
if (buf_size == 0) {
wl1271_warning("received empty data");
break;
}
/*
* Choose the block we want to read
* For aggregated packets, only the first memory block should
* be retrieved. The FW takes care of the rest.
*/
mem_block = wl1271_rx_get_mem_block(status, drv_rx_counter);
wl->rx_mem_pool_addr.addr = (mem_block << 8) +
le32_to_cpu(wl_mem_map->packet_memory_pool_start);
wl->rx_mem_pool_addr.addr_extra =
wl->rx_mem_pool_addr.addr + 4;
wl1271_write(wl, WL1271_SLV_REG_DATA, &wl->rx_mem_pool_addr,
sizeof(wl->rx_mem_pool_addr), false);
/* Read all available packets at once */
wl1271_read(wl, WL1271_SLV_MEM_DATA, wl->aggr_buf,
buf_size, true);
/* Split data into separate packets */
pkt_offset = 0;
while (pkt_offset < buf_size) {
pkt_length = wl1271_rx_get_buf_size(status,
drv_rx_counter);
/*
* the handle data call can only fail in memory-outage
* conditions, in that case the received frame will just
* be dropped.
*/
wl1271_rx_handle_data(wl,
wl->aggr_buf + pkt_offset,
pkt_length);
wl->rx_counter++;
drv_rx_counter++;
drv_rx_counter &= NUM_RX_PKT_DESC_MOD_MASK;
pkt_offset += pkt_length;
}
}
/*
* Write the driver's packet counter to the FW. This is only required
* for older hardware revisions
*/
if (wl->quirks & WL12XX_QUIRK_END_OF_TRANSACTION)
wl1271_write32(wl, RX_DRIVER_COUNTER_ADDRESS, wl->rx_counter);
}
void wl1271_set_default_filters(struct wl1271 *wl)
{
if (wl->bss_type == BSS_TYPE_AP_BSS) {
wl->rx_config = WL1271_DEFAULT_AP_RX_CONFIG;
wl->rx_filter = WL1271_DEFAULT_AP_RX_FILTER;
} else {
wl->rx_config = WL1271_DEFAULT_STA_RX_CONFIG;
wl->rx_filter = WL1271_DEFAULT_STA_RX_FILTER;
}
}