/*
* Copyright (C) 2003-2008 Takahiro Hirofuchi
*
* This is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307,
* USA.
*/
#include <linux/slab.h>
#include <linux/kthread.h>
#include "usbip_common.h"
#include "vhci.h"
#define DRIVER_VERSION "1.0"
#define DRIVER_AUTHOR "Takahiro Hirofuchi"
#define DRIVER_DESC "Virtual Host Controller Interface Driver for USB/IP"
#define DRIVER_LICENCE "GPL"
MODULE_AUTHOR(DRIVER_AUTHOR);
MODULE_DESCRIPTION(DRIVER_DESC);
MODULE_LICENSE(DRIVER_LICENCE);
/*
* TODO
* - update root hub emulation
* - move the emulation code to userland ?
* porting to other operating systems
* minimize kernel code
* - add suspend/resume code
* - clean up everything
*/
/* See usb gadget dummy hcd */
static int vhci_hub_status(struct usb_hcd *hcd, char *buff);
static int vhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
u16 wIndex, char *buff, u16 wLength);
static int vhci_urb_enqueue(struct usb_hcd *hcd, struct urb *urb,
gfp_t mem_flags);
static int vhci_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status);
static int vhci_start(struct usb_hcd *vhci_hcd);
static void vhci_stop(struct usb_hcd *hcd);
static int vhci_get_frame_number(struct usb_hcd *hcd);
static const char driver_name[] = "vhci_hcd";
static const char driver_desc[] = "USB/IP Virtual Host Controller";
struct vhci_hcd *the_controller;
static const char *bit_desc[] = {
"CONNECTION", /*0*/
"ENABLE", /*1*/
"SUSPEND", /*2*/
"OVER_CURRENT", /*3*/
"RESET", /*4*/
"R5", /*5*/
"R6", /*6*/
"R7", /*7*/
"POWER", /*8*/
"LOWSPEED", /*9*/
"HIGHSPEED", /*10*/
"PORT_TEST", /*11*/
"INDICATOR", /*12*/
"R13", /*13*/
"R14", /*14*/
"R15", /*15*/
"C_CONNECTION", /*16*/
"C_ENABLE", /*17*/
"C_SUSPEND", /*18*/
"C_OVER_CURRENT", /*19*/
"C_RESET", /*20*/
"R21", /*21*/
"R22", /*22*/
"R23", /*23*/
"R24", /*24*/
"R25", /*25*/
"R26", /*26*/
"R27", /*27*/
"R28", /*28*/
"R29", /*29*/
"R30", /*30*/
"R31", /*31*/
};
static void dump_port_status(u32 status)
{
int i = 0;
printk(KERN_DEBUG "status %08x:", status);
for (i = 0; i < 32; i++) {
if (status & (1 << i))
printk(" %s", bit_desc[i]);
}
printk("\n");
}
void rh_port_connect(int rhport, enum usb_device_speed speed)
{
unsigned long flags;
usbip_dbg_vhci_rh("rh_port_connect %d\n", rhport);
spin_lock_irqsave(&the_controller->lock, flags);
the_controller->port_status[rhport] |= USB_PORT_STAT_CONNECTION
| (1 << USB_PORT_FEAT_C_CONNECTION);
switch (speed) {
case USB_SPEED_HIGH:
the_controller->port_status[rhport] |= USB_PORT_STAT_HIGH_SPEED;
break;
case USB_SPEED_LOW:
the_controller->port_status[rhport] |= USB_PORT_STAT_LOW_SPEED;
break;
default:
break;
}
/* spin_lock(&the_controller->vdev[rhport].ud.lock);
* the_controller->vdev[rhport].ud.status = VDEV_CONNECT;
* spin_unlock(&the_controller->vdev[rhport].ud.lock); */
spin_unlock_irqrestore(&the_controller->lock, flags);
usb_hcd_poll_rh_status(vhci_to_hcd(the_controller));
}
void rh_port_disconnect(int rhport)
{
unsigned long flags;
usbip_dbg_vhci_rh("rh_port_disconnect %d\n", rhport);
spin_lock_irqsave(&the_controller->lock, flags);
/* stop_activity(dum, driver); */
the_controller->port_status[rhport] &= ~USB_PORT_STAT_CONNECTION;
the_controller->port_status[rhport] |=
(1 << USB_PORT_FEAT_C_CONNECTION);
/* not yet complete the disconnection
* spin_lock(&vdev->ud.lock);
* vdev->ud.status = VHC_ST_DISCONNECT;
* spin_unlock(&vdev->ud.lock); */
spin_unlock_irqrestore(&the_controller->lock, flags);
usb_hcd_poll_rh_status(vhci_to_hcd(the_controller));
}
/*----------------------------------------------------------------------*/
#define PORT_C_MASK \
((USB_PORT_STAT_C_CONNECTION \
| USB_PORT_STAT_C_ENABLE \
| USB_PORT_STAT_C_SUSPEND \
| USB_PORT_STAT_C_OVERCURRENT \
| USB_PORT_STAT_C_RESET) << 16)
/*
* This function is almostly the same as dummy_hcd.c:dummy_hub_status() without
* suspend/resume support. But, it is modified to provide multiple ports.
*
* @buf: a bitmap to show which port status has been changed.
* bit 0: reserved or used for another purpose?
* bit 1: the status of port 0 has been changed.
* bit 2: the status of port 1 has been changed.
* ...
* bit 7: the status of port 6 has been changed.
* bit 8: the status of port 7 has been changed.
* ...
* bit 15: the status of port 14 has been changed.
*
* So, the maximum number of ports is 31 ( port 0 to port 30) ?
*
* The return value is the actual transferred length in byte. If nothing has
* been changed, return 0. In the case that the number of ports is less than or
* equal to 6 (VHCI_NPORTS==7), return 1.
*
*/
static int vhci_hub_status(struct usb_hcd *hcd, char *buf)
{
struct vhci_hcd *vhci;
unsigned long flags;
int retval = 0;
/* the enough buffer is allocated according to USB_MAXCHILDREN */
unsigned long *event_bits = (unsigned long *) buf;
int rhport;
int changed = 0;
*event_bits = 0;
vhci = hcd_to_vhci(hcd);
spin_lock_irqsave(&vhci->lock, flags);
if (!HCD_HW_ACCESSIBLE(hcd)) {
usbip_dbg_vhci_rh("hw accessible flag in on?\n");
goto done;
}
/* check pseudo status register for each port */
for (rhport = 0; rhport < VHCI_NPORTS; rhport++) {
if ((vhci->port_status[rhport] & PORT_C_MASK)) {
/* The status of a port has been changed, */
usbip_dbg_vhci_rh("port %d is changed\n", rhport);
*event_bits |= 1 << (rhport + 1);
changed = 1;
}
}
usbip_uinfo("changed %d\n", changed);
if (hcd->state == HC_STATE_SUSPENDED)
usb_hcd_resume_root_hub(hcd);
if (changed)
retval = 1 + (VHCI_NPORTS / 8);
else
retval = 0;
done:
spin_unlock_irqrestore(&vhci->lock, flags);
return retval;
}
/* See hub_configure in hub.c */
static inline void hub_descriptor(struct usb_hub_descriptor *desc)
{
memset(desc, 0, sizeof(*desc));
desc->bDescriptorType = 0x29;
desc->bDescLength = 9;
desc->wHubCharacteristics = (__force __u16)
(__constant_cpu_to_le16(0x0001));
desc->bNbrPorts = VHCI_NPORTS;
desc->u.hs.DeviceRemovable[0] = 0xff;
desc->u.hs.DeviceRemovable[1] = 0xff;
}
static int vhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
u16 wIndex, char *buf, u16 wLength)
{
struct vhci_hcd *dum;
int retval = 0;
unsigned long flags;
int rhport;
u32 prev_port_status[VHCI_NPORTS];
if (!HCD_HW_ACCESSIBLE(hcd))
return -ETIMEDOUT;
/*
* NOTE:
* wIndex shows the port number and begins from 1.
*/
usbip_dbg_vhci_rh("typeReq %x wValue %x wIndex %x\n", typeReq, wValue,
wIndex);
if (wIndex > VHCI_NPORTS)
printk(KERN_ERR "%s: invalid port number %d\n", __func__,
wIndex);
rhport = ((__u8)(wIndex & 0x00ff)) - 1;
dum = hcd_to_vhci(hcd);
spin_lock_irqsave(&dum->lock, flags);
/* store old status and compare now and old later */
if (usbip_dbg_flag_vhci_rh) {
int i = 0;
for (i = 0; i < VHCI_NPORTS; i++)
prev_port_status[i] = dum->port_status[i];
}
switch (typeReq) {
case ClearHubFeature:
usbip_dbg_vhci_rh(" ClearHubFeature\n");
break;
case ClearPortFeature:
switch (wValue) {
case USB_PORT_FEAT_SUSPEND:
if (dum->port_status[rhport] & USB_PORT_STAT_SUSPEND) {
/* 20msec signaling */
dum->resuming = 1;
dum->re_timeout =
jiffies + msecs_to_jiffies(20);
}
break;
case USB_PORT_FEAT_POWER:
usbip_dbg_vhci_rh(" ClearPortFeature: "
"USB_PORT_FEAT_POWER\n");
dum->port_status[rhport] = 0;
/* dum->address = 0; */
/* dum->hdev = 0; */
dum->resuming = 0;
break;
case USB_PORT_FEAT_C_RESET:
usbip_dbg_vhci_rh(" ClearPortFeature: "
"USB_PORT_FEAT_C_RESET\n");
switch (dum->vdev[rhport].speed) {
case USB_SPEED_HIGH:
dum->port_status[rhport] |=
USB_PORT_STAT_HIGH_SPEED;
break;
case USB_SPEED_LOW:
dum->port_status[rhport] |=
USB_PORT_STAT_LOW_SPEED;
break;
default:
break;
}
default:
usbip_dbg_vhci_rh(" ClearPortFeature: default %x\n",
wValue);
dum->port_status[rhport] &= ~(1 << wValue);
}
break;
case GetHubDescriptor:
usbip_dbg_vhci_rh(" GetHubDescriptor\n");
hub_descriptor((struct usb_hub_descriptor *) buf);
break;
case GetHubStatus:
usbip_dbg_vhci_rh(" GetHubStatus\n");
*(__le32 *) buf = __constant_cpu_to_le32(0);
break;
case GetPortStatus:
usbip_dbg_vhci_rh(" GetPortStatus port %x\n", wIndex);
if (wIndex > VHCI_NPORTS || wIndex < 1) {
printk(KERN_ERR "%s: invalid port number %d\n",
__func__, wIndex);
retval = -EPIPE;
}
/* we do no care of resume. */
/* whoever resets or resumes must GetPortStatus to
* complete it!!
* */
if (dum->resuming && time_after(jiffies, dum->re_timeout)) {
printk(KERN_ERR "%s: not yet\n", __func__);
dum->port_status[rhport] |=
(1 << USB_PORT_FEAT_C_SUSPEND);
dum->port_status[rhport] &=
~(1 << USB_PORT_FEAT_SUSPEND);
dum->resuming = 0;
dum->re_timeout = 0;
/* if (dum->driver && dum->driver->resume) {
* spin_unlock (&dum->lock);
* dum->driver->resume (&dum->gadget);
* spin_lock (&dum->lock);
* } */
}
if ((dum->port_status[rhport] & (1 << USB_PORT_FEAT_RESET)) !=
0 && time_after(jiffies, dum->re_timeout)) {
dum->port_status[rhport] |=
(1 << USB_PORT_FEAT_C_RESET);
dum->port_status[rhport] &=
~(1 << USB_PORT_FEAT_RESET);
dum->re_timeout = 0;
if (dum->vdev[rhport].ud.status ==
VDEV_ST_NOTASSIGNED) {
usbip_dbg_vhci_rh(" enable rhport %d "
"(status %u)\n",
rhport,
dum->vdev[rhport].ud.status);
dum->port_status[rhport] |=
USB_PORT_STAT_ENABLE;
}
#if 0
if (dum->driver) {
dum->port_status[rhport] |=
USB_PORT_STAT_ENABLE;
/* give it the best speed we agree on */
dum->gadget.speed = dum->driver->speed;
dum->gadget.ep0->maxpacket = 64;
switch (dum->gadget.speed) {
case USB_SPEED_HIGH:
dum->port_status[rhport] |=
USB_PORT_STAT_HIGH_SPEED;
break;
case USB_SPEED_LOW:
dum->gadget.ep0->maxpacket = 8;
dum->port_status[rhport] |=
USB_PORT_STAT_LOW_SPEED;
break;
default:
dum->gadget.speed = USB_SPEED_FULL;
break;
}
}
#endif
}
((u16 *) buf)[0] = cpu_to_le16(dum->port_status[rhport]);
((u16 *) buf)[1] =
cpu_to_le16(dum->port_status[rhport] >> 16);
usbip_dbg_vhci_rh(" GetPortStatus bye %x %x\n", ((u16 *)buf)[0],
((u16 *)buf)[1]);
break;
case SetHubFeature:
usbip_dbg_vhci_rh(" SetHubFeature\n");
retval = -EPIPE;
break;
case SetPortFeature:
switch (wValue) {
case USB_PORT_FEAT_SUSPEND:
usbip_dbg_vhci_rh(" SetPortFeature: "
"USB_PORT_FEAT_SUSPEND\n");
printk(KERN_ERR "%s: not yet\n", __func__);
#if 0
dum->port_status[rhport] |=
(1 << USB_PORT_FEAT_SUSPEND);
if (dum->driver->suspend) {
spin_unlock(&dum->lock);
dum->driver->suspend(&dum->gadget);
spin_lock(&dum->lock);
}
#endif
break;
case USB_PORT_FEAT_RESET:
usbip_dbg_vhci_rh(" SetPortFeature: "
"USB_PORT_FEAT_RESET\n");
/* if it's already running, disconnect first */
if (dum->port_status[rhport] & USB_PORT_STAT_ENABLE) {
dum->port_status[rhport] &=
~(USB_PORT_STAT_ENABLE |
USB_PORT_STAT_LOW_SPEED |
USB_PORT_STAT_HIGH_SPEED);
#if 0
if (dum->driver) {
dev_dbg(hardware, "disconnect\n");
stop_activity(dum, dum->driver);
}
#endif
/* FIXME test that code path! */
}
/* 50msec reset signaling */
dum->re_timeout = jiffies + msecs_to_jiffies(50);
/* FALLTHROUGH */
default:
usbip_dbg_vhci_rh(" SetPortFeature: default %d\n",
wValue);
dum->port_status[rhport] |= (1 << wValue);
}
break;
default:
printk(KERN_ERR "%s: default: no such request\n", __func__);
/* dev_dbg (hardware,
* "hub control req%04x v%04x i%04x l%d\n",
* typeReq, wValue, wIndex, wLength); */
/* "protocol stall" on error */
retval = -EPIPE;
}
if (usbip_dbg_flag_vhci_rh) {
printk(KERN_DEBUG "port %d\n", rhport);
dump_port_status(prev_port_status[rhport]);
dump_port_status(dum->port_status[rhport]);
}
usbip_dbg_vhci_rh(" bye\n");
spin_unlock_irqrestore(&dum->lock, flags);
return retval;
}
/*----------------------------------------------------------------------*/
static struct vhci_device *get_vdev(struct usb_device *udev)
{
int i;
if (!udev)
return NULL;
for (i = 0; i < VHCI_NPORTS; i++)
if (the_controller->vdev[i].udev == udev)
return port_to_vdev(i);
return NULL;
}
static void vhci_tx_urb(struct urb *urb)
{
struct vhci_device *vdev = get_vdev(urb->dev);
struct vhci_priv *priv;
unsigned long flag;
if (!vdev) {
err("could not get virtual device");
/* BUG(); */
return;
}
priv = kzalloc(sizeof(struct vhci_priv), GFP_ATOMIC);
spin_lock_irqsave(&vdev->priv_lock, flag);
if (!priv) {
dev_err(&urb->dev->dev, "malloc vhci_priv\n");
spin_unlock_irqrestore(&vdev->priv_lock, flag);
usbip_event_add(&vdev->ud, VDEV_EVENT_ERROR_MALLOC);
return;
}
priv->seqnum = atomic_inc_return(&the_controller->seqnum);
if (priv->seqnum == 0xffff)
usbip_uinfo("seqnum max\n");
priv->vdev = vdev;
priv->urb = urb;
urb->hcpriv = (void *) priv;
list_add_tail(&priv->list, &vdev->priv_tx);
wake_up(&vdev->waitq_tx);
spin_unlock_irqrestore(&vdev->priv_lock, flag);
}
static int vhci_urb_enqueue(struct usb_hcd *hcd, struct urb *urb,
gfp_t mem_flags)
{
struct device *dev = &urb->dev->dev;
int ret = 0;
unsigned long flags;
struct vhci_device *vdev;
usbip_dbg_vhci_hc("enter, usb_hcd %p urb %p mem_flags %d\n",
hcd, urb, mem_flags);
/* patch to usb_sg_init() is in 2.5.60 */
BUG_ON(!urb->transfer_buffer && urb->transfer_buffer_length);
spin_lock_irqsave(&the_controller->lock, flags);
if (urb->status != -EINPROGRESS) {
dev_err(dev, "URB already unlinked!, status %d\n", urb->status);
spin_unlock_irqrestore(&the_controller->lock, flags);
return urb->status;
}
vdev = port_to_vdev(urb->dev->portnum-1);
/* refuse enqueue for dead connection */
spin_lock(&vdev->ud.lock);
if (vdev->ud.status == VDEV_ST_NULL || vdev->ud.status == VDEV_ST_ERROR) {
usbip_uerr("enqueue for inactive port %d\n", vdev->rhport);
spin_unlock(&vdev->ud.lock);
spin_unlock_irqrestore(&the_controller->lock, flags);
return -ENODEV;
}
spin_unlock(&vdev->ud.lock);
ret = usb_hcd_link_urb_to_ep(hcd, urb);
if (ret)
goto no_need_unlink;
/*
* The enumeration process is as follows;
*
* 1. Get_Descriptor request to DevAddrs(0) EndPoint(0)
* to get max packet length of default pipe
*
* 2. Set_Address request to DevAddr(0) EndPoint(0)
*
*/
if (usb_pipedevice(urb->pipe) == 0) {
__u8 type = usb_pipetype(urb->pipe);
struct usb_ctrlrequest *ctrlreq =
(struct usb_ctrlrequest *) urb->setup_packet;
if (type != PIPE_CONTROL || !ctrlreq) {
dev_err(dev, "invalid request to devnum 0\n");
ret = -EINVAL;
goto no_need_xmit;
}
switch (ctrlreq->bRequest) {
case USB_REQ_SET_ADDRESS:
/* set_address may come when a device is reset */
dev_info(dev, "SetAddress Request (%d) to port %d\n",
ctrlreq->wValue, vdev->rhport);
if (vdev->udev)
usb_put_dev(vdev->udev);
vdev->udev = usb_get_dev(urb->dev);
spin_lock(&vdev->ud.lock);
vdev->ud.status = VDEV_ST_USED;
spin_unlock(&vdev->ud.lock);
if (urb->status == -EINPROGRESS) {
/* This request is successfully completed. */
/* If not -EINPROGRESS, possibly unlinked. */
urb->status = 0;
}
goto no_need_xmit;
case USB_REQ_GET_DESCRIPTOR:
if (ctrlreq->wValue == (USB_DT_DEVICE << 8))
usbip_dbg_vhci_hc("Not yet?: "
"Get_Descriptor to device 0 "
"(get max pipe size)\n");
if (vdev->udev)
usb_put_dev(vdev->udev);
vdev->udev = usb_get_dev(urb->dev);
goto out;
default:
/* NOT REACHED */
dev_err(dev, "invalid request to devnum 0 bRequest %u, "
"wValue %u\n", ctrlreq->bRequest,
ctrlreq->wValue);
ret = -EINVAL;
goto no_need_xmit;
}
}
out:
vhci_tx_urb(urb);
spin_unlock_irqrestore(&the_controller->lock, flags);
return 0;
no_need_xmit:
usb_hcd_unlink_urb_from_ep(hcd, urb);
no_need_unlink:
spin_unlock_irqrestore(&the_controller->lock, flags);
usb_hcd_giveback_urb(vhci_to_hcd(the_controller), urb, urb->status);
return ret;
}
/*
* vhci_rx gives back the urb after receiving the reply of the urb. If an
* unlink pdu is sent or not, vhci_rx receives a normal return pdu and gives
* back its urb. For the driver unlinking the urb, the content of the urb is
* not important, but the calling to its completion handler is important; the
* completion of unlinking is notified by the completion handler.
*
*
* CLIENT SIDE
*
* - When vhci_hcd receives RET_SUBMIT,
*
* - case 1a). the urb of the pdu is not unlinking.
* - normal case
* => just give back the urb
*
* - case 1b). the urb of the pdu is unlinking.
* - usbip.ko will return a reply of the unlinking request.
* => give back the urb now and go to case 2b).
*
* - When vhci_hcd receives RET_UNLINK,
*
* - case 2a). a submit request is still pending in vhci_hcd.
* - urb was really pending in usbip.ko and urb_unlink_urb() was
* completed there.
* => free a pending submit request
* => notify unlink completeness by giving back the urb
*
* - case 2b). a submit request is *not* pending in vhci_hcd.
* - urb was already given back to the core driver.
* => do not give back the urb
*
*
* SERVER SIDE
*
* - When usbip receives CMD_UNLINK,
*
* - case 3a). the urb of the unlink request is now in submission.
* => do usb_unlink_urb().
* => after the unlink is completed, send RET_UNLINK.
*
* - case 3b). the urb of the unlink request is not in submission.
* - may be already completed or never be received
* => send RET_UNLINK
*
*/
static int vhci_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status)
{
unsigned long flags;
struct vhci_priv *priv;
struct vhci_device *vdev;
usbip_uinfo("vhci_hcd: dequeue a urb %p\n", urb);
spin_lock_irqsave(&the_controller->lock, flags);
priv = urb->hcpriv;
if (!priv) {
/* URB was never linked! or will be soon given back by
* vhci_rx. */
spin_unlock_irqrestore(&the_controller->lock, flags);
return 0;
}
{
int ret = 0;
ret = usb_hcd_check_unlink_urb(hcd, urb, status);
if (ret) {
spin_unlock_irqrestore(&the_controller->lock, flags);
return ret;
}
}
/* send unlink request here? */
vdev = priv->vdev;
if (!vdev->ud.tcp_socket) {
/* tcp connection is closed */
unsigned long flags2;
spin_lock_irqsave(&vdev->priv_lock, flags2);
usbip_uinfo("vhci_hcd: device %p seems to be disconnected\n",
vdev);
list_del(&priv->list);
kfree(priv);
urb->hcpriv = NULL;
spin_unlock_irqrestore(&vdev->priv_lock, flags2);
/*
* If tcp connection is alive, we have sent CMD_UNLINK.
* vhci_rx will receive RET_UNLINK and give back the URB.
* Otherwise, we give back it here.
*/
usbip_uinfo("vhci_hcd: vhci_urb_dequeue() gives back urb %p\n",
urb);
usb_hcd_unlink_urb_from_ep(hcd, urb);
spin_unlock_irqrestore(&the_controller->lock, flags);
usb_hcd_giveback_urb(vhci_to_hcd(the_controller), urb,
urb->status);
spin_lock_irqsave(&the_controller->lock, flags);
} else {
/* tcp connection is alive */
unsigned long flags2;
struct vhci_unlink *unlink;
spin_lock_irqsave(&vdev->priv_lock, flags2);
/* setup CMD_UNLINK pdu */
unlink = kzalloc(sizeof(struct vhci_unlink), GFP_ATOMIC);
if (!unlink) {
usbip_uerr("malloc vhci_unlink\n");
spin_unlock_irqrestore(&vdev->priv_lock, flags2);
spin_unlock_irqrestore(&the_controller->lock, flags);
usbip_event_add(&vdev->ud, VDEV_EVENT_ERROR_MALLOC);
return -ENOMEM;
}
unlink->seqnum = atomic_inc_return(&the_controller->seqnum);
if (unlink->seqnum == 0xffff)
usbip_uinfo("seqnum max\n");
unlink->unlink_seqnum = priv->seqnum;
usbip_uinfo("vhci_hcd: device %p seems to be still connected\n",
vdev);
/* send cmd_unlink and try to cancel the pending URB in the
* peer */
list_add_tail(&unlink->list, &vdev->unlink_tx);
wake_up(&vdev->waitq_tx);
spin_unlock_irqrestore(&vdev->priv_lock, flags2);
}
spin_unlock_irqrestore(&the_controller->lock, flags);
usbip_dbg_vhci_hc("leave\n");
return 0;
}
static void vhci_device_unlink_cleanup(struct vhci_device *vdev)
{
struct vhci_unlink *unlink, *tmp;
spin_lock(&vdev->priv_lock);
list_for_each_entry_safe(unlink, tmp, &vdev->unlink_tx, list) {
usbip_uinfo("unlink cleanup tx %lu\n", unlink->unlink_seqnum);
list_del(&unlink->list);
kfree(unlink);
}
list_for_each_entry_safe(unlink, tmp, &vdev->unlink_rx, list) {
struct urb *urb;
/* give back URB of unanswered unlink request */
usbip_uinfo("unlink cleanup rx %lu\n", unlink->unlink_seqnum);
urb = pickup_urb_and_free_priv(vdev, unlink->unlink_seqnum);
if (!urb) {
usbip_uinfo("the urb (seqnum %lu) was already given back\n",
unlink->unlink_seqnum);
list_del(&unlink->list);
kfree(unlink);
continue;
}
urb->status = -ENODEV;
spin_lock(&the_controller->lock);
usb_hcd_unlink_urb_from_ep(vhci_to_hcd(the_controller), urb);
spin_unlock(&the_controller->lock);
usb_hcd_giveback_urb(vhci_to_hcd(the_controller), urb, urb->status);
list_del(&unlink->list);
kfree(unlink);
}
spin_unlock(&vdev->priv_lock);
}
/*
* The important thing is that only one context begins cleanup.
* This is why error handling and cleanup become simple.
* We do not want to consider race condition as possible.
*/
static void vhci_shutdown_connection(struct usbip_device *ud)
{
struct vhci_device *vdev = container_of(ud, struct vhci_device, ud);
/* need this? see stub_dev.c */
if (ud->tcp_socket) {
usbip_udbg("shutdown tcp_socket %p\n", ud->tcp_socket);
kernel_sock_shutdown(ud->tcp_socket, SHUT_RDWR);
}
/* kill threads related to this sdev, if v.c. exists */
if (vdev->ud.tcp_rx)
kthread_stop(vdev->ud.tcp_rx);
if (vdev->ud.tcp_tx)
kthread_stop(vdev->ud.tcp_tx);
usbip_uinfo("stop threads\n");
/* active connection is closed */
if (vdev->ud.tcp_socket != NULL) {
sock_release(vdev->ud.tcp_socket);
vdev->ud.tcp_socket = NULL;
}
usbip_uinfo("release socket\n");
vhci_device_unlink_cleanup(vdev);
/*
* rh_port_disconnect() is a trigger of ...
* usb_disable_device():
* disable all the endpoints for a USB device.
* usb_disable_endpoint():
* disable endpoints. pending urbs are unlinked(dequeued).
*
* NOTE: After calling rh_port_disconnect(), the USB device drivers of a
* deteched device should release used urbs in a cleanup function(i.e.
* xxx_disconnect()). Therefore, vhci_hcd does not need to release
* pushed urbs and their private data in this function.
*
* NOTE: vhci_dequeue() must be considered carefully. When shutdowning
* a connection, vhci_shutdown_connection() expects vhci_dequeue()
* gives back pushed urbs and frees their private data by request of
* the cleanup function of a USB driver. When unlinking a urb with an
* active connection, vhci_dequeue() does not give back the urb which
* is actually given back by vhci_rx after receiving its return pdu.
*
*/
rh_port_disconnect(vdev->rhport);
usbip_uinfo("disconnect device\n");
}
static void vhci_device_reset(struct usbip_device *ud)
{
struct vhci_device *vdev = container_of(ud, struct vhci_device, ud);
spin_lock(&ud->lock);
vdev->speed = 0;
vdev->devid = 0;
if (vdev->udev)
usb_put_dev(vdev->udev);
vdev->udev = NULL;
ud->tcp_socket = NULL;
ud->status = VDEV_ST_NULL;
spin_unlock(&ud->lock);
}
static void vhci_device_unusable(struct usbip_device *ud)
{
spin_lock(&ud->lock);
ud->status = VDEV_ST_ERROR;
spin_unlock(&ud->lock);
}
static void vhci_device_init(struct vhci_device *vdev)
{
memset(vdev, 0, sizeof(*vdev));
vdev->ud.side = USBIP_VHCI;
vdev->ud.status = VDEV_ST_NULL;
/* vdev->ud.lock = SPIN_LOCK_UNLOCKED; */
spin_lock_init(&vdev->ud.lock);
INIT_LIST_HEAD(&vdev->priv_rx);
INIT_LIST_HEAD(&vdev->priv_tx);
INIT_LIST_HEAD(&vdev->unlink_tx);
INIT_LIST_HEAD(&vdev->unlink_rx);
/* vdev->priv_lock = SPIN_LOCK_UNLOCKED; */
spin_lock_init(&vdev->priv_lock);
init_waitqueue_head(&vdev->waitq_tx);
vdev->ud.eh_ops.shutdown = vhci_shutdown_connection;
vdev->ud.eh_ops.reset = vhci_device_reset;
vdev->ud.eh_ops.unusable = vhci_device_unusable;
usbip_start_eh(&vdev->ud);
}
/*----------------------------------------------------------------------*/
static int vhci_start(struct usb_hcd *hcd)
{
struct vhci_hcd *vhci = hcd_to_vhci(hcd);
int rhport;
int err = 0;
usbip_dbg_vhci_hc("enter vhci_start\n");
/* initialize private data of usb_hcd */
for (rhport = 0; rhport < VHCI_NPORTS; rhport++) {
struct vhci_device *vdev = &vhci->vdev[rhport];
vhci_device_init(vdev);
vdev->rhport = rhport;
}
atomic_set(&vhci->seqnum, 0);
spin_lock_init(&vhci->lock);
hcd->power_budget = 0; /* no limit */
hcd->state = HC_STATE_RUNNING;
hcd->uses_new_polling = 1;
/* vhci_hcd is now ready to be controlled through sysfs */
err = sysfs_create_group(&vhci_dev(vhci)->kobj, &dev_attr_group);
if (err) {
usbip_uerr("create sysfs files\n");
return err;
}
return 0;
}
static void vhci_stop(struct usb_hcd *hcd)
{
struct vhci_hcd *vhci = hcd_to_vhci(hcd);
int rhport = 0;
usbip_dbg_vhci_hc("stop VHCI controller\n");
/* 1. remove the userland interface of vhci_hcd */
sysfs_remove_group(&vhci_dev(vhci)->kobj, &dev_attr_group);
/* 2. shutdown all the ports of vhci_hcd */
for (rhport = 0 ; rhport < VHCI_NPORTS; rhport++) {
struct vhci_device *vdev = &vhci->vdev[rhport];
usbip_event_add(&vdev->ud, VDEV_EVENT_REMOVED);
usbip_stop_eh(&vdev->ud);
}
usbip_uinfo("vhci_stop done\n");
}
/*----------------------------------------------------------------------*/
static int vhci_get_frame_number(struct usb_hcd *hcd)
{
usbip_uerr("Not yet implemented\n");
return 0;
}
#ifdef CONFIG_PM
/* FIXME: suspend/resume */
static int vhci_bus_suspend(struct usb_hcd *hcd)
{
struct vhci_hcd *vhci = hcd_to_vhci(hcd);
dev_dbg(&hcd->self.root_hub->dev, "%s\n", __func__);
spin_lock_irq(&vhci->lock);
/* vhci->rh_state = DUMMY_RH_SUSPENDED;
* set_link_state(vhci); */
hcd->state = HC_STATE_SUSPENDED;
spin_unlock_irq(&vhci->lock);
return 0;
}
static int vhci_bus_resume(struct usb_hcd *hcd)
{
struct vhci_hcd *vhci = hcd_to_vhci(hcd);
int rc = 0;
dev_dbg(&hcd->self.root_hub->dev, "%s\n", __func__);
spin_lock_irq(&vhci->lock);
if (!HCD_HW_ACCESSIBLE(hcd)) {
rc = -ESHUTDOWN;
} else {
/* vhci->rh_state = DUMMY_RH_RUNNING;
* set_link_state(vhci);
* if (!list_empty(&vhci->urbp_list))
* mod_timer(&vhci->timer, jiffies); */
hcd->state = HC_STATE_RUNNING;
}
spin_unlock_irq(&vhci->lock);
return rc;
return 0;
}
#else
#define vhci_bus_suspend NULL
#define vhci_bus_resume NULL
#endif
static struct hc_driver vhci_hc_driver = {
.description = driver_name,
.product_desc = driver_desc,
.hcd_priv_size = sizeof(struct vhci_hcd),
.flags = HCD_USB2,
.start = vhci_start,
.stop = vhci_stop,
.urb_enqueue = vhci_urb_enqueue,
.urb_dequeue = vhci_urb_dequeue,
.get_frame_number = vhci_get_frame_number,
.hub_status_data = vhci_hub_status,
.hub_control = vhci_hub_control,
.bus_suspend = vhci_bus_suspend,
.bus_resume = vhci_bus_resume,
};
static int vhci_hcd_probe(struct platform_device *pdev)
{
struct usb_hcd *hcd;
int ret;
usbip_uinfo("proving...\n");
usbip_dbg_vhci_hc("name %s id %d\n", pdev->name, pdev->id);
/* will be removed */
if (pdev->dev.dma_mask) {
dev_info(&pdev->dev, "vhci_hcd DMA not supported\n");
return -EINVAL;
}
/*
* Allocate and initialize hcd.
* Our private data is also allocated automatically.
*/
hcd = usb_create_hcd(&vhci_hc_driver, &pdev->dev, dev_name(&pdev->dev));
if (!hcd) {
usbip_uerr("create hcd failed\n");
return -ENOMEM;
}
hcd->has_tt = 1;
/* this is private data for vhci_hcd */
the_controller = hcd_to_vhci(hcd);
/*
* Finish generic HCD structure initialization and register.
* Call the driver's reset() and start() routines.
*/
ret = usb_add_hcd(hcd, 0, 0);
if (ret != 0) {
usbip_uerr("usb_add_hcd failed %d\n", ret);
usb_put_hcd(hcd);
the_controller = NULL;
return ret;
}
usbip_dbg_vhci_hc("bye\n");
return 0;
}
static int vhci_hcd_remove(struct platform_device *pdev)
{
struct usb_hcd *hcd;
hcd = platform_get_drvdata(pdev);
if (!hcd)
return 0;
/*
* Disconnects the root hub,
* then reverses the effects of usb_add_hcd(),
* invoking the HCD's stop() methods.
*/
usb_remove_hcd(hcd);
usb_put_hcd(hcd);
the_controller = NULL;
return 0;
}
#ifdef CONFIG_PM
/* what should happen for USB/IP under suspend/resume? */
static int vhci_hcd_suspend(struct platform_device *pdev, pm_message_t state)
{
struct usb_hcd *hcd;
int rhport = 0;
int connected = 0;
int ret = 0;
dev_dbg(&pdev->dev, "%s\n", __func__);
hcd = platform_get_drvdata(pdev);
spin_lock(&the_controller->lock);
for (rhport = 0; rhport < VHCI_NPORTS; rhport++)
if (the_controller->port_status[rhport] &
USB_PORT_STAT_CONNECTION)
connected += 1;
spin_unlock(&the_controller->lock);
if (connected > 0) {
usbip_uinfo("We have %d active connection%s. Do not suspend.\n",
connected, (connected == 1 ? "" : "s"));
ret = -EBUSY;
} else {
usbip_uinfo("suspend vhci_hcd");
clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
}
return ret;
}
static int vhci_hcd_resume(struct platform_device *pdev)
{
struct usb_hcd *hcd;
dev_dbg(&pdev->dev, "%s\n", __func__);
hcd = platform_get_drvdata(pdev);
set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
usb_hcd_poll_rh_status(hcd);
return 0;
}
#else
#define vhci_hcd_suspend NULL
#define vhci_hcd_resume NULL
#endif
static struct platform_driver vhci_driver = {
.probe = vhci_hcd_probe,
.remove = __devexit_p(vhci_hcd_remove),
.suspend = vhci_hcd_suspend,
.resume = vhci_hcd_resume,
.driver = {
.name = (char *) driver_name,
.owner = THIS_MODULE,
},
};
/*----------------------------------------------------------------------*/
/*
* The VHCI 'device' is 'virtual'; not a real plug&play hardware.
* We need to add this virtual device as a platform device arbitrarily:
* 1. platform_device_register()
*/
static void the_pdev_release(struct device *dev)
{
return;
}
static struct platform_device the_pdev = {
/* should be the same name as driver_name */
.name = (char *) driver_name,
.id = -1,
.dev = {
/* .driver = &vhci_driver, */
.release = the_pdev_release,
},
};
static int __init vhci_init(void)
{
int ret;
usbip_dbg_vhci_hc("enter\n");
if (usb_disabled())
return -ENODEV;
printk(KERN_INFO KBUILD_MODNAME ": %s, %s\n", driver_name,
DRIVER_VERSION);
ret = platform_driver_register(&vhci_driver);
if (ret < 0)
goto err_driver_register;
ret = platform_device_register(&the_pdev);
if (ret < 0)
goto err_platform_device_register;
usbip_dbg_vhci_hc("bye\n");
return ret;
/* error occurred */
err_platform_device_register:
platform_driver_unregister(&vhci_driver);
err_driver_register:
usbip_dbg_vhci_hc("bye\n");
return ret;
}
module_init(vhci_init);
static void __exit vhci_cleanup(void)
{
usbip_dbg_vhci_hc("enter\n");
platform_device_unregister(&the_pdev);
platform_driver_unregister(&vhci_driver);
usbip_dbg_vhci_hc("bye\n");
}
module_exit(vhci_cleanup);