/* * This file is part of wl1251 * * Copyright (c) 1998-2007 Texas Instruments Incorporated * Copyright (C) 2008 Nokia Corporation * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License * version 2 as published by the Free Software Foundation. * * This program is distributed in the hope that it will be useful, but * WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA * 02110-1301 USA * */ #include <linux/skbuff.h> #include <linux/gfp.h> #include <net/mac80211.h> #include "wl1251.h" #include "reg.h" #include "io.h" #include "rx.h" #include "cmd.h" #include "acx.h" static void wl1251_rx_header(struct wl1251 *wl, struct wl1251_rx_descriptor *desc) { u32 rx_packet_ring_addr; rx_packet_ring_addr = wl->data_path->rx_packet_ring_addr; if (wl->rx_current_buffer) rx_packet_ring_addr += wl->data_path->rx_packet_ring_chunk_size; wl1251_mem_read(wl, rx_packet_ring_addr, desc, sizeof(*desc)); } static void wl1251_rx_status(struct wl1251 *wl, struct wl1251_rx_descriptor *desc, struct ieee80211_rx_status *status, u8 beacon) { u64 mactime; int ret; memset(status, 0, sizeof(struct ieee80211_rx_status)); status->band = IEEE80211_BAND_2GHZ; status->mactime = desc->timestamp; /* * The rx status timestamp is a 32 bits value while the TSF is a * 64 bits one. * For IBSS merging, TSF is mandatory, so we have to get it * somehow, so we ask for ACX_TSF_INFO. * That could be moved to the get_tsf() hook, but unfortunately, * this one must be atomic, while our SPI routines can sleep. */ if ((wl->bss_type == BSS_TYPE_IBSS) && beacon) { ret = wl1251_acx_tsf_info(wl, &mactime); if (ret == 0) status->mactime = mactime; } status->signal = desc->rssi; /* * FIXME: guessing that snr needs to be divided by two, otherwise * the values don't make any sense */ wl->noise = desc->rssi - desc->snr / 2; status->freq = ieee80211_channel_to_frequency(desc->channel, status->band); status->flag |= RX_FLAG_MACTIME_MPDU; if (desc->flags & RX_DESC_ENCRYPTION_MASK) { status->flag |= RX_FLAG_IV_STRIPPED | RX_FLAG_MMIC_STRIPPED; if (likely(!(desc->flags & RX_DESC_DECRYPT_FAIL))) status->flag |= RX_FLAG_DECRYPTED; if (unlikely(desc->flags & RX_DESC_MIC_FAIL)) status->flag |= RX_FLAG_MMIC_ERROR; } if (unlikely(!(desc->flags & RX_DESC_VALID_FCS))) status->flag |= RX_FLAG_FAILED_FCS_CRC; switch (desc->rate) { /* skip 1 and 12 Mbps because they have same value 0x0a */ case RATE_2MBPS: status->rate_idx = 1; break; case RATE_5_5MBPS: status->rate_idx = 2; break; case RATE_11MBPS: status->rate_idx = 3; break; case RATE_6MBPS: status->rate_idx = 4; break; case RATE_9MBPS: status->rate_idx = 5; break; case RATE_18MBPS: status->rate_idx = 7; break; case RATE_24MBPS: status->rate_idx = 8; break; case RATE_36MBPS: status->rate_idx = 9; break; case RATE_48MBPS: status->rate_idx = 10; break; case RATE_54MBPS: status->rate_idx = 11; break; } /* for 1 and 12 Mbps we have to check the modulation */ if (desc->rate == RATE_1MBPS) { if (!(desc->mod_pre & OFDM_RATE_BIT)) /* CCK -> RATE_1MBPS */ status->rate_idx = 0; else /* OFDM -> RATE_12MBPS */ status->rate_idx = 6; } if (desc->mod_pre & SHORT_PREAMBLE_BIT) status->flag |= RX_FLAG_SHORTPRE; } static void wl1251_rx_body(struct wl1251 *wl, struct wl1251_rx_descriptor *desc) { struct sk_buff *skb; struct ieee80211_rx_status status; u8 *rx_buffer, beacon = 0; u16 length, *fc; u32 curr_id, last_id_inc, rx_packet_ring_addr; length = WL1251_RX_ALIGN(desc->length - PLCP_HEADER_LENGTH); curr_id = (desc->flags & RX_DESC_SEQNUM_MASK) >> RX_DESC_PACKETID_SHIFT; last_id_inc = (wl->rx_last_id + 1) % (RX_MAX_PACKET_ID + 1); if (last_id_inc != curr_id) { wl1251_warning("curr ID:%d, last ID inc:%d", curr_id, last_id_inc); wl->rx_last_id = curr_id; } else { wl->rx_last_id = last_id_inc; } rx_packet_ring_addr = wl->data_path->rx_packet_ring_addr + sizeof(struct wl1251_rx_descriptor) + 20; if (wl->rx_current_buffer) rx_packet_ring_addr += wl->data_path->rx_packet_ring_chunk_size; skb = __dev_alloc_skb(length, GFP_KERNEL); if (!skb) { wl1251_error("Couldn't allocate RX frame"); return; } rx_buffer = skb_put(skb, length); wl1251_mem_read(wl, rx_packet_ring_addr, rx_buffer, length); /* The actual length doesn't include the target's alignment */ skb->len = desc->length - PLCP_HEADER_LENGTH; fc = (u16 *)skb->data; if ((*fc & IEEE80211_FCTL_STYPE) == IEEE80211_STYPE_BEACON) beacon = 1; wl1251_rx_status(wl, desc, &status, beacon); wl1251_debug(DEBUG_RX, "rx skb 0x%p: %d B %s", skb, skb->len, beacon ? "beacon" : ""); memcpy(IEEE80211_SKB_RXCB(skb), &status, sizeof(status)); ieee80211_rx_ni(wl->hw, skb); } static void wl1251_rx_ack(struct wl1251 *wl) { u32 data, addr; if (wl->rx_current_buffer) { addr = ACX_REG_INTERRUPT_TRIG_H; data = INTR_TRIG_RX_PROC1; } else { addr = ACX_REG_INTERRUPT_TRIG; data = INTR_TRIG_RX_PROC0; } wl1251_reg_write32(wl, addr, data); /* Toggle buffer ring */ wl->rx_current_buffer = !wl->rx_current_buffer; } void wl1251_rx(struct wl1251 *wl) { struct wl1251_rx_descriptor *rx_desc; if (wl->state != WL1251_STATE_ON) return; rx_desc = wl->rx_descriptor; /* We first read the frame's header */ wl1251_rx_header(wl, rx_desc); /* Now we can read the body */ wl1251_rx_body(wl, rx_desc); /* Finally, we need to ACK the RX */ wl1251_rx_ack(wl); }