/* * linux/drivers/mmc/core/sd_ops.h * * Copyright 2006-2007 Pierre Ossman * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or (at * your option) any later version. */ #include <linux/slab.h> #include <linux/types.h> #include <linux/scatterlist.h> #include <linux/mmc/host.h> #include <linux/mmc/card.h> #include <linux/mmc/mmc.h> #include <linux/mmc/sd.h> #include "core.h" #include "sd_ops.h" static int mmc_app_cmd(struct mmc_host *host, struct mmc_card *card) { int err; struct mmc_command cmd; BUG_ON(!host); BUG_ON(card && (card->host != host)); cmd.opcode = MMC_APP_CMD; if (card) { cmd.arg = card->rca << 16; cmd.flags = MMC_RSP_SPI_R1 | MMC_RSP_R1 | MMC_CMD_AC; } else { cmd.arg = 0; cmd.flags = MMC_RSP_SPI_R1 | MMC_RSP_R1 | MMC_CMD_BCR; } err = mmc_wait_for_cmd(host, &cmd, 0); if (err) return err; /* Check that card supported application commands */ if (!mmc_host_is_spi(host) && !(cmd.resp[0] & R1_APP_CMD)) return -EOPNOTSUPP; return 0; } /** * mmc_wait_for_app_cmd - start an application command and wait for completion * @host: MMC host to start command * @card: Card to send MMC_APP_CMD to * @cmd: MMC command to start * @retries: maximum number of retries * * Sends a MMC_APP_CMD, checks the card response, sends the command * in the parameter and waits for it to complete. Return any error * that occurred while the command was executing. Do not attempt to * parse the response. */ int mmc_wait_for_app_cmd(struct mmc_host *host, struct mmc_card *card, struct mmc_command *cmd, int retries) { struct mmc_request mrq; int i, err; BUG_ON(!cmd); BUG_ON(retries < 0); err = -EIO; /* * We have to resend MMC_APP_CMD for each attempt so * we cannot use the retries field in mmc_command. */ for (i = 0;i <= retries;i++) { err = mmc_app_cmd(host, card); if (err) { /* no point in retrying; no APP commands allowed */ if (mmc_host_is_spi(host)) { if (cmd->resp[0] & R1_SPI_ILLEGAL_COMMAND) break; } continue; } memset(&mrq, 0, sizeof(struct mmc_request)); memset(cmd->resp, 0, sizeof(cmd->resp)); cmd->retries = 0; mrq.cmd = cmd; cmd->data = NULL; mmc_wait_for_req(host, &mrq); err = cmd->error; if (!cmd->error) break; /* no point in retrying illegal APP commands */ if (mmc_host_is_spi(host)) { if (cmd->resp[0] & R1_SPI_ILLEGAL_COMMAND) break; } } return err; } EXPORT_SYMBOL(mmc_wait_for_app_cmd); int mmc_app_set_bus_width(struct mmc_card *card, int width) { int err; struct mmc_command cmd; BUG_ON(!card); BUG_ON(!card->host); memset(&cmd, 0, sizeof(struct mmc_command)); cmd.opcode = SD_APP_SET_BUS_WIDTH; cmd.flags = MMC_RSP_R1 | MMC_CMD_AC; switch (width) { case MMC_BUS_WIDTH_1: cmd.arg = SD_BUS_WIDTH_1; break; case MMC_BUS_WIDTH_4: cmd.arg = SD_BUS_WIDTH_4; break; default: return -EINVAL; } err = mmc_wait_for_app_cmd(card->host, card, &cmd, MMC_CMD_RETRIES); if (err) return err; return 0; } int mmc_send_app_op_cond(struct mmc_host *host, u32 ocr, u32 *rocr) { struct mmc_command cmd; int i, err = 0; BUG_ON(!host); memset(&cmd, 0, sizeof(struct mmc_command)); cmd.opcode = SD_APP_OP_COND; if (mmc_host_is_spi(host)) cmd.arg = ocr & (1 << 30); /* SPI only defines one bit */ else cmd.arg = ocr; cmd.flags = MMC_RSP_SPI_R1 | MMC_RSP_R3 | MMC_CMD_BCR; for (i = 100; i; i--) { err = mmc_wait_for_app_cmd(host, NULL, &cmd, MMC_CMD_RETRIES); if (err) break; /* if we're just probing, do a single pass */ if (ocr == 0) break; /* otherwise wait until reset completes */ if (mmc_host_is_spi(host)) { if (!(cmd.resp[0] & R1_SPI_IDLE)) break; } else { if (cmd.resp[0] & MMC_CARD_BUSY) break; } err = -ETIMEDOUT; mmc_delay(10); } if (rocr && !mmc_host_is_spi(host)) *rocr = cmd.resp[0]; return err; } int mmc_send_if_cond(struct mmc_host *host, u32 ocr) { struct mmc_command cmd; int err; static const u8 test_pattern = 0xAA; u8 result_pattern; /* * To support SD 2.0 cards, we must always invoke SD_SEND_IF_COND * before SD_APP_OP_COND. This command will harmlessly fail for * SD 1.0 cards. */ cmd.opcode = SD_SEND_IF_COND; cmd.arg = ((ocr & 0xFF8000) != 0) << 8 | test_pattern; cmd.flags = MMC_RSP_SPI_R7 | MMC_RSP_R7 | MMC_CMD_BCR; err = mmc_wait_for_cmd(host, &cmd, 0); if (err) return err; if (mmc_host_is_spi(host)) result_pattern = cmd.resp[1] & 0xFF; else result_pattern = cmd.resp[0] & 0xFF; if (result_pattern != test_pattern) return -EIO; return 0; } int mmc_send_relative_addr(struct mmc_host *host, unsigned int *rca) { int err; struct mmc_command cmd; BUG_ON(!host); BUG_ON(!rca); memset(&cmd, 0, sizeof(struct mmc_command)); cmd.opcode = SD_SEND_RELATIVE_ADDR; cmd.arg = 0; cmd.flags = MMC_RSP_R6 | MMC_CMD_BCR; err = mmc_wait_for_cmd(host, &cmd, MMC_CMD_RETRIES); if (err) return err; *rca = cmd.resp[0] >> 16; return 0; } int mmc_app_send_scr(struct mmc_card *card, u32 *scr) { int err; struct mmc_request mrq; struct mmc_command cmd; struct mmc_data data; struct scatterlist sg; void *data_buf; BUG_ON(!card); BUG_ON(!card->host); BUG_ON(!scr); /* NOTE: caller guarantees scr is heap-allocated */ err = mmc_app_cmd(card->host, card); if (err) return err; /* dma onto stack is unsafe/nonportable, but callers to this * routine normally provide temporary on-stack buffers ... */ data_buf = kmalloc(sizeof(card->raw_scr), GFP_KERNEL); if (data_buf == NULL) return -ENOMEM; memset(&mrq, 0, sizeof(struct mmc_request)); memset(&cmd, 0, sizeof(struct mmc_command)); memset(&data, 0, sizeof(struct mmc_data)); mrq.cmd = &cmd; mrq.data = &data; cmd.opcode = SD_APP_SEND_SCR; cmd.arg = 0; cmd.flags = MMC_RSP_SPI_R1 | MMC_RSP_R1 | MMC_CMD_ADTC; data.blksz = 8; data.blocks = 1; data.flags = MMC_DATA_READ; data.sg = &sg; data.sg_len = 1; sg_init_one(&sg, data_buf, 8); mmc_set_data_timeout(&data, card); mmc_wait_for_req(card->host, &mrq); memcpy(scr, data_buf, sizeof(card->raw_scr)); kfree(data_buf); if (cmd.error) return cmd.error; if (data.error) return data.error; scr[0] = be32_to_cpu(scr[0]); scr[1] = be32_to_cpu(scr[1]); return 0; } int mmc_sd_switch(struct mmc_card *card, int mode, int group, u8 value, u8 *resp) { struct mmc_request mrq; struct mmc_command cmd; struct mmc_data data; struct scatterlist sg; BUG_ON(!card); BUG_ON(!card->host); /* NOTE: caller guarantees resp is heap-allocated */ mode = !!mode; value &= 0xF; memset(&mrq, 0, sizeof(struct mmc_request)); memset(&cmd, 0, sizeof(struct mmc_command)); memset(&data, 0, sizeof(struct mmc_data)); mrq.cmd = &cmd; mrq.data = &data; cmd.opcode = SD_SWITCH; cmd.arg = mode << 31 | 0x00FFFFFF; cmd.arg &= ~(0xF << (group * 4)); cmd.arg |= value << (group * 4); cmd.flags = MMC_RSP_SPI_R1 | MMC_RSP_R1 | MMC_CMD_ADTC; data.blksz = 64; data.blocks = 1; data.flags = MMC_DATA_READ; data.sg = &sg; data.sg_len = 1; sg_init_one(&sg, resp, 64); mmc_set_data_timeout(&data, card); mmc_wait_for_req(card->host, &mrq); if (cmd.error) return cmd.error; if (data.error) return data.error; return 0; } int mmc_app_sd_status(struct mmc_card *card, void *ssr) { int err; struct mmc_request mrq; struct mmc_command cmd; struct mmc_data data; struct scatterlist sg; BUG_ON(!card); BUG_ON(!card->host); BUG_ON(!ssr); /* NOTE: caller guarantees ssr is heap-allocated */ err = mmc_app_cmd(card->host, card); if (err) return err; memset(&mrq, 0, sizeof(struct mmc_request)); memset(&cmd, 0, sizeof(struct mmc_command)); memset(&data, 0, sizeof(struct mmc_data)); mrq.cmd = &cmd; mrq.data = &data; cmd.opcode = SD_APP_SD_STATUS; cmd.arg = 0; cmd.flags = MMC_RSP_SPI_R2 | MMC_RSP_R1 | MMC_CMD_ADTC; data.blksz = 64; data.blocks = 1; data.flags = MMC_DATA_READ; data.sg = &sg; data.sg_len = 1; sg_init_one(&sg, ssr, 64); mmc_set_data_timeout(&data, card); mmc_wait_for_req(card->host, &mrq); if (cmd.error) return cmd.error; if (data.error) return data.error; return 0; }