#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/pci.h>
#include <linux/i2o.h>
static void i2o_report_util_cmd(u8 cmd);
static void i2o_report_exec_cmd(u8 cmd);
static void i2o_report_fail_status(u8 req_status, u32 * msg);
static void i2o_report_common_status(u8 req_status);
static void i2o_report_common_dsc(u16 detailed_status);
/*
* Used for error reporting/debugging purposes.
* Report Cmd name, Request status, Detailed Status.
*/
void i2o_report_status(const char *severity, const char *str,
struct i2o_message *m)
{
u32 *msg = (u32 *) m;
u8 cmd = (msg[1] >> 24) & 0xFF;
u8 req_status = (msg[4] >> 24) & 0xFF;
u16 detailed_status = msg[4] & 0xFFFF;
if (cmd == I2O_CMD_UTIL_EVT_REGISTER)
return; // No status in this reply
printk("%s%s: ", severity, str);
if (cmd < 0x1F) // Utility cmd
i2o_report_util_cmd(cmd);
else if (cmd >= 0xA0 && cmd <= 0xEF) // Executive cmd
i2o_report_exec_cmd(cmd);
else
printk("Cmd = %0#2x, ", cmd); // Other cmds
if (msg[0] & MSG_FAIL) {
i2o_report_fail_status(req_status, msg);
return;
}
i2o_report_common_status(req_status);
if (cmd < 0x1F || (cmd >= 0xA0 && cmd <= 0xEF))
i2o_report_common_dsc(detailed_status);
else
printk(" / DetailedStatus = %0#4x.\n",
detailed_status);
}
/* Used to dump a message to syslog during debugging */
void i2o_dump_message(struct i2o_message *m)
{
#ifdef DEBUG
u32 *msg = (u32 *) m;
int i;
printk(KERN_INFO "Dumping I2O message size %d @ %p\n",
msg[0] >> 16 & 0xffff, msg);
for (i = 0; i < ((msg[0] >> 16) & 0xffff); i++)
printk(KERN_INFO " msg[%d] = %0#10x\n", i, msg[i]);
#endif
}
/*
* Used for error reporting/debugging purposes.
* Following fail status are common to all classes.
* The preserved message must be handled in the reply handler.
*/
static void i2o_report_fail_status(u8 req_status, u32 * msg)
{
static char *FAIL_STATUS[] = {
"0x80", /* not used */
"SERVICE_SUSPENDED", /* 0x81 */
"SERVICE_TERMINATED", /* 0x82 */
"CONGESTION",
"FAILURE",
"STATE_ERROR",
"TIME_OUT",
"ROUTING_FAILURE",
"INVALID_VERSION",
"INVALID_OFFSET",
"INVALID_MSG_FLAGS",
"FRAME_TOO_SMALL",
"FRAME_TOO_LARGE",
"INVALID_TARGET_ID",
"INVALID_INITIATOR_ID",
"INVALID_INITIATOR_CONTEX", /* 0x8F */
"UNKNOWN_FAILURE" /* 0xFF */
};
if (req_status == I2O_FSC_TRANSPORT_UNKNOWN_FAILURE)
printk("TRANSPORT_UNKNOWN_FAILURE (%0#2x).\n",
req_status);
else
printk("TRANSPORT_%s.\n",
FAIL_STATUS[req_status & 0x0F]);
/* Dump some details */
printk(KERN_ERR " InitiatorId = %d, TargetId = %d\n",
(msg[1] >> 12) & 0xFFF, msg[1] & 0xFFF);
printk(KERN_ERR " LowestVersion = 0x%02X, HighestVersion = 0x%02X\n",
(msg[4] >> 8) & 0xFF, msg[4] & 0xFF);
printk(KERN_ERR " FailingHostUnit = 0x%04X, FailingIOP = 0x%03X\n",
msg[5] >> 16, msg[5] & 0xFFF);
printk(KERN_ERR " Severity: 0x%02X\n", (msg[4] >> 16) & 0xFF);
if (msg[4] & (1 << 16))
printk(KERN_DEBUG "(FormatError), "
"this msg can never be delivered/processed.\n");
if (msg[4] & (1 << 17))
printk(KERN_DEBUG "(PathError), "
"this msg can no longer be delivered/processed.\n");
if (msg[4] & (1 << 18))
printk(KERN_DEBUG "(PathState), "
"the system state does not allow delivery.\n");
if (msg[4] & (1 << 19))
printk(KERN_DEBUG
"(Congestion), resources temporarily not available;"
"do not retry immediately.\n");
}
/*
* Used for error reporting/debugging purposes.
* Following reply status are common to all classes.
*/
static void i2o_report_common_status(u8 req_status)
{
static char *REPLY_STATUS[] = {
"SUCCESS",
"ABORT_DIRTY",
"ABORT_NO_DATA_TRANSFER",
"ABORT_PARTIAL_TRANSFER",
"ERROR_DIRTY",
"ERROR_NO_DATA_TRANSFER",
"ERROR_PARTIAL_TRANSFER",
"PROCESS_ABORT_DIRTY",
"PROCESS_ABORT_NO_DATA_TRANSFER",
"PROCESS_ABORT_PARTIAL_TRANSFER",
"TRANSACTION_ERROR",
"PROGRESS_REPORT"
};
if (req_status >= ARRAY_SIZE(REPLY_STATUS))
printk("RequestStatus = %0#2x", req_status);
else
printk("%s", REPLY_STATUS[req_status]);
}
/*
* Used for error reporting/debugging purposes.
* Following detailed status are valid for executive class,
* utility class, DDM class and for transaction error replies.
*/
static void i2o_report_common_dsc(u16 detailed_status)
{
static char *COMMON_DSC[] = {
"SUCCESS",
"0x01", // not used
"BAD_KEY",
"TCL_ERROR",
"REPLY_BUFFER_FULL",
"NO_SUCH_PAGE",
"INSUFFICIENT_RESOURCE_SOFT",
"INSUFFICIENT_RESOURCE_HARD",
"0x08", // not used
"CHAIN_BUFFER_TOO_LARGE",
"UNSUPPORTED_FUNCTION",
"DEVICE_LOCKED",
"DEVICE_RESET",
"INAPPROPRIATE_FUNCTION",
"INVALID_INITIATOR_ADDRESS",
"INVALID_MESSAGE_FLAGS",
"INVALID_OFFSET",
"INVALID_PARAMETER",
"INVALID_REQUEST",
"INVALID_TARGET_ADDRESS",
"MESSAGE_TOO_LARGE",
"MESSAGE_TOO_SMALL",
"MISSING_PARAMETER",
"TIMEOUT",
"UNKNOWN_ERROR",
"UNKNOWN_FUNCTION",
"UNSUPPORTED_VERSION",
"DEVICE_BUSY",
"DEVICE_NOT_AVAILABLE"
};
if (detailed_status > I2O_DSC_DEVICE_NOT_AVAILABLE)
printk(" / DetailedStatus = %0#4x.\n",
detailed_status);
else
printk(" / %s.\n", COMMON_DSC[detailed_status]);
}
/*
* Used for error reporting/debugging purposes
*/
static void i2o_report_util_cmd(u8 cmd)
{
switch (cmd) {
case I2O_CMD_UTIL_NOP:
printk("UTIL_NOP, ");
break;
case I2O_CMD_UTIL_ABORT:
printk("UTIL_ABORT, ");
break;
case I2O_CMD_UTIL_CLAIM:
printk("UTIL_CLAIM, ");
break;
case I2O_CMD_UTIL_RELEASE:
printk("UTIL_CLAIM_RELEASE, ");
break;
case I2O_CMD_UTIL_CONFIG_DIALOG:
printk("UTIL_CONFIG_DIALOG, ");
break;
case I2O_CMD_UTIL_DEVICE_RESERVE:
printk("UTIL_DEVICE_RESERVE, ");
break;
case I2O_CMD_UTIL_DEVICE_RELEASE:
printk("UTIL_DEVICE_RELEASE, ");
break;
case I2O_CMD_UTIL_EVT_ACK:
printk("UTIL_EVENT_ACKNOWLEDGE, ");
break;
case I2O_CMD_UTIL_EVT_REGISTER:
printk("UTIL_EVENT_REGISTER, ");
break;
case I2O_CMD_UTIL_LOCK:
printk("UTIL_LOCK, ");
break;
case I2O_CMD_UTIL_LOCK_RELEASE:
printk("UTIL_LOCK_RELEASE, ");
break;
case I2O_CMD_UTIL_PARAMS_GET:
printk("UTIL_PARAMS_GET, ");
break;
case I2O_CMD_UTIL_PARAMS_SET:
printk("UTIL_PARAMS_SET, ");
break;
case I2O_CMD_UTIL_REPLY_FAULT_NOTIFY:
printk("UTIL_REPLY_FAULT_NOTIFY, ");
break;
default:
printk("Cmd = %0#2x, ", cmd);
}
}
/*
* Used for error reporting/debugging purposes
*/
static void i2o_report_exec_cmd(u8 cmd)
{
switch (cmd) {
case I2O_CMD_ADAPTER_ASSIGN:
printk("EXEC_ADAPTER_ASSIGN, ");
break;
case I2O_CMD_ADAPTER_READ:
printk("EXEC_ADAPTER_READ, ");
break;
case I2O_CMD_ADAPTER_RELEASE:
printk("EXEC_ADAPTER_RELEASE, ");
break;
case I2O_CMD_BIOS_INFO_SET:
printk("EXEC_BIOS_INFO_SET, ");
break;
case I2O_CMD_BOOT_DEVICE_SET:
printk("EXEC_BOOT_DEVICE_SET, ");
break;
case I2O_CMD_CONFIG_VALIDATE:
printk("EXEC_CONFIG_VALIDATE, ");
break;
case I2O_CMD_CONN_SETUP:
printk("EXEC_CONN_SETUP, ");
break;
case I2O_CMD_DDM_DESTROY:
printk("EXEC_DDM_DESTROY, ");
break;
case I2O_CMD_DDM_ENABLE:
printk("EXEC_DDM_ENABLE, ");
break;
case I2O_CMD_DDM_QUIESCE:
printk("EXEC_DDM_QUIESCE, ");
break;
case I2O_CMD_DDM_RESET:
printk("EXEC_DDM_RESET, ");
break;
case I2O_CMD_DDM_SUSPEND:
printk("EXEC_DDM_SUSPEND, ");
break;
case I2O_CMD_DEVICE_ASSIGN:
printk("EXEC_DEVICE_ASSIGN, ");
break;
case I2O_CMD_DEVICE_RELEASE:
printk("EXEC_DEVICE_RELEASE, ");
break;
case I2O_CMD_HRT_GET:
printk("EXEC_HRT_GET, ");
break;
case I2O_CMD_ADAPTER_CLEAR:
printk("EXEC_IOP_CLEAR, ");
break;
case I2O_CMD_ADAPTER_CONNECT:
printk("EXEC_IOP_CONNECT, ");
break;
case I2O_CMD_ADAPTER_RESET:
printk("EXEC_IOP_RESET, ");
break;
case I2O_CMD_LCT_NOTIFY:
printk("EXEC_LCT_NOTIFY, ");
break;
case I2O_CMD_OUTBOUND_INIT:
printk("EXEC_OUTBOUND_INIT, ");
break;
case I2O_CMD_PATH_ENABLE:
printk("EXEC_PATH_ENABLE, ");
break;
case I2O_CMD_PATH_QUIESCE:
printk("EXEC_PATH_QUIESCE, ");
break;
case I2O_CMD_PATH_RESET:
printk("EXEC_PATH_RESET, ");
break;
case I2O_CMD_STATIC_MF_CREATE:
printk("EXEC_STATIC_MF_CREATE, ");
break;
case I2O_CMD_STATIC_MF_RELEASE:
printk("EXEC_STATIC_MF_RELEASE, ");
break;
case I2O_CMD_STATUS_GET:
printk("EXEC_STATUS_GET, ");
break;
case I2O_CMD_SW_DOWNLOAD:
printk("EXEC_SW_DOWNLOAD, ");
break;
case I2O_CMD_SW_UPLOAD:
printk("EXEC_SW_UPLOAD, ");
break;
case I2O_CMD_SW_REMOVE:
printk("EXEC_SW_REMOVE, ");
break;
case I2O_CMD_SYS_ENABLE:
printk("EXEC_SYS_ENABLE, ");
break;
case I2O_CMD_SYS_MODIFY:
printk("EXEC_SYS_MODIFY, ");
break;
case I2O_CMD_SYS_QUIESCE:
printk("EXEC_SYS_QUIESCE, ");
break;
case I2O_CMD_SYS_TAB_SET:
printk("EXEC_SYS_TAB_SET, ");
break;
default:
printk("Cmd = %#02x, ", cmd);
}
}
void i2o_debug_state(struct i2o_controller *c)
{
printk(KERN_INFO "%s: State = ", c->name);
switch (((i2o_status_block *) c->status_block.virt)->iop_state) {
case 0x01:
printk("INIT\n");
break;
case 0x02:
printk("RESET\n");
break;
case 0x04:
printk("HOLD\n");
break;
case 0x05:
printk("READY\n");
break;
case 0x08:
printk("OPERATIONAL\n");
break;
case 0x10:
printk("FAILED\n");
break;
case 0x11:
printk("FAULTED\n");
break;
default:
printk("%x (unknown !!)\n",
((i2o_status_block *) c->status_block.virt)->iop_state);
}
};
void i2o_dump_hrt(struct i2o_controller *c)
{
u32 *rows = (u32 *) c->hrt.virt;
u8 *p = (u8 *) c->hrt.virt;
u8 *d;
int count;
int length;
int i;
int state;
if (p[3] != 0) {
printk(KERN_ERR
"%s: HRT table for controller is too new a version.\n",
c->name);
return;
}
count = p[0] | (p[1] << 8);
length = p[2];
printk(KERN_INFO "%s: HRT has %d entries of %d bytes each.\n",
c->name, count, length << 2);
rows += 2;
for (i = 0; i < count; i++) {
printk(KERN_INFO "Adapter %08X: ", rows[0]);
p = (u8 *) (rows + 1);
d = (u8 *) (rows + 2);
state = p[1] << 8 | p[0];
printk("TID %04X:[", state & 0xFFF);
state >>= 12;
if (state & (1 << 0))
printk("H"); /* Hidden */
if (state & (1 << 2)) {
printk("P"); /* Present */
if (state & (1 << 1))
printk("C"); /* Controlled */
}
if (state > 9)
printk("*"); /* Hard */
printk("]:");
switch (p[3] & 0xFFFF) {
case 0:
/* Adapter private bus - easy */
printk("Local bus %d: I/O at 0x%04X Mem 0x%08X", p[2],
d[1] << 8 | d[0], *(u32 *) (d + 4));
break;
case 1:
/* ISA bus */
printk("ISA %d: CSN %d I/O at 0x%04X Mem 0x%08X", p[2],
d[2], d[1] << 8 | d[0], *(u32 *) (d + 4));
break;
case 2: /* EISA bus */
printk("EISA %d: Slot %d I/O at 0x%04X Mem 0x%08X",
p[2], d[3], d[1] << 8 | d[0], *(u32 *) (d + 4));
break;
case 3: /* MCA bus */
printk("MCA %d: Slot %d I/O at 0x%04X Mem 0x%08X", p[2],
d[3], d[1] << 8 | d[0], *(u32 *) (d + 4));
break;
case 4: /* PCI bus */
printk("PCI %d: Bus %d Device %d Function %d", p[2],
d[2], d[1], d[0]);
break;
case 0x80: /* Other */
default:
printk("Unsupported bus type.");
break;
}
printk("\n");
rows += length;
}
}
EXPORT_SYMBOL(i2o_dump_message);