/* SF16FMR2 radio driver for Linux radio support * heavily based on fmi driver... * (c) 2000-2002 Ziglio Frediano, freddy77@angelfire.com * * Notes on the hardware * * Frequency control is done digitally -- ie out(port,encodefreq(95.8)); * No volume control - only mute/unmute - you have to use line volume * * For read stereo/mono you must wait 0.1 sec after set frequency and * card unmuted so I set frequency on unmute * Signal handling seem to work only on autoscanning (not implemented) * * Converted to V4L2 API by Mauro Carvalho Chehab <mchehab@infradead.org> */ #include <linux/module.h> /* Modules */ #include <linux/init.h> /* Initdata */ #include <linux/ioport.h> /* request_region */ #include <linux/delay.h> /* udelay */ #include <linux/videodev2.h> /* kernel radio structs */ #include <linux/mutex.h> #include <linux/version.h> /* for KERNEL_VERSION MACRO */ #include <linux/io.h> /* outb, outb_p */ #include <media/v4l2-device.h> #include <media/v4l2-ioctl.h> MODULE_AUTHOR("Ziglio Frediano, freddy77@angelfire.com"); MODULE_DESCRIPTION("A driver for the SF16FMR2 radio."); MODULE_LICENSE("GPL"); static int io = 0x384; static int radio_nr = -1; module_param(io, int, 0); MODULE_PARM_DESC(io, "I/O address of the SF16FMR2 card (should be 0x384, if do not work try 0x284)"); module_param(radio_nr, int, 0); #define RADIO_VERSION KERNEL_VERSION(0,0,2) #define AUD_VOL_INDEX 1 #undef DEBUG //#define DEBUG 1 #ifdef DEBUG # define debug_print(s) printk s #else # define debug_print(s) #endif /* this should be static vars for module size */ struct fmr2 { struct v4l2_device v4l2_dev; struct video_device vdev; struct mutex lock; int io; int curvol; /* 0-15 */ int mute; int stereo; /* card is producing stereo audio */ unsigned long curfreq; /* freq in kHz */ int card_type; }; static struct fmr2 fmr2_card; /* hw precision is 12.5 kHz * It is only useful to give freq in interval of 200 (=0.0125Mhz), * other bits will be truncated */ #define RSF16_ENCODE(x) ((x) / 200 + 856) #define RSF16_MINFREQ (87 * 16000) #define RSF16_MAXFREQ (108 * 16000) static inline void wait(int n, int io) { for (; n; --n) inb(io); } static void outbits(int bits, unsigned int data, int nWait, int io) { int bit; for (; --bits >= 0;) { bit = (data >> bits) & 1; outb(bit, io); wait(nWait, io); outb(bit | 2, io); wait(nWait, io); outb(bit, io); wait(nWait, io); } } static inline void fmr2_mute(int io) { outb(0x00, io); wait(4, io); } static inline void fmr2_unmute(int io) { outb(0x04, io); wait(4, io); } static inline int fmr2_stereo_mode(int io) { int n = inb(io); outb(6, io); inb(io); n = ((n >> 3) & 1) ^ 1; debug_print((KERN_DEBUG "stereo: %d\n", n)); return n; } static int fmr2_product_info(struct fmr2 *dev) { int n = inb(dev->io); n &= 0xC1; if (n == 0) { /* this should support volume set */ dev->card_type = 12; return 0; } /* not volume (mine is 11) */ dev->card_type = (n == 128) ? 11 : 0; return n; } static inline int fmr2_getsigstr(struct fmr2 *dev) { /* !!! works only if scanning freq */ int res = 0xffff; outb(5, dev->io); wait(4, dev->io); if (!(inb(dev->io) & 1)) res = 0; debug_print((KERN_DEBUG "signal: %d\n", res)); return res; } /* set frequency and unmute card */ static int fmr2_setfreq(struct fmr2 *dev) { unsigned long freq = dev->curfreq; fmr2_mute(dev->io); /* 0x42 for mono output * 0x102 forward scanning * 0x182 scansione avanti */ outbits(9, 0x2, 3, dev->io); outbits(16, RSF16_ENCODE(freq), 2, dev->io); fmr2_unmute(dev->io); /* wait 0.11 sec */ msleep(110); /* NOTE if mute this stop radio you must set freq on unmute */ dev->stereo = fmr2_stereo_mode(dev->io); return 0; } /* !!! not tested, in my card this doesn't work !!! */ static int fmr2_setvolume(struct fmr2 *dev) { int vol[16] = { 0x021, 0x084, 0x090, 0x104, 0x110, 0x204, 0x210, 0x402, 0x404, 0x408, 0x410, 0x801, 0x802, 0x804, 0x808, 0x810 }; int i, a; int n = vol[dev->curvol & 0x0f]; if (dev->card_type != 11) return 1; for (i = 12; --i >= 0; ) { a = ((n >> i) & 1) << 6; /* if (a==0) a = 0; else a = 0x40; */ outb(a | 4, dev->io); wait(4, dev->io); outb(a | 0x24, dev->io); wait(4, dev->io); outb(a | 4, dev->io); wait(4, dev->io); } for (i = 6; --i >= 0; ) { a = ((0x18 >> i) & 1) << 6; outb(a | 4, dev->io); wait(4, dev->io); outb(a | 0x24, dev->io); wait(4, dev->io); outb(a | 4, dev->io); wait(4, dev->io); } wait(4, dev->io); outb(0x14, dev->io); return 0; } static int vidioc_querycap(struct file *file, void *priv, struct v4l2_capability *v) { strlcpy(v->driver, "radio-sf16fmr2", sizeof(v->driver)); strlcpy(v->card, "SF16-FMR2 radio", sizeof(v->card)); strlcpy(v->bus_info, "ISA", sizeof(v->bus_info)); v->version = RADIO_VERSION; v->capabilities = V4L2_CAP_TUNER | V4L2_CAP_RADIO; return 0; } static int vidioc_g_tuner(struct file *file, void *priv, struct v4l2_tuner *v) { struct fmr2 *fmr2 = video_drvdata(file); if (v->index > 0) return -EINVAL; strlcpy(v->name, "FM", sizeof(v->name)); v->type = V4L2_TUNER_RADIO; v->rangelow = RSF16_MINFREQ; v->rangehigh = RSF16_MAXFREQ; v->rxsubchans = fmr2->stereo ? V4L2_TUNER_SUB_STEREO : V4L2_TUNER_SUB_MONO; v->capability = V4L2_TUNER_CAP_STEREO | V4L2_TUNER_CAP_LOW; v->audmode = V4L2_TUNER_MODE_STEREO; mutex_lock(&fmr2->lock); v->signal = fmr2_getsigstr(fmr2); mutex_unlock(&fmr2->lock); return 0; } static int vidioc_s_tuner(struct file *file, void *priv, struct v4l2_tuner *v) { return v->index ? -EINVAL : 0; } static int vidioc_s_frequency(struct file *file, void *priv, struct v4l2_frequency *f) { struct fmr2 *fmr2 = video_drvdata(file); if (f->tuner != 0 || f->type != V4L2_TUNER_RADIO) return -EINVAL; if (f->frequency < RSF16_MINFREQ || f->frequency > RSF16_MAXFREQ) return -EINVAL; /* rounding in steps of 200 to match the freq that will be used */ fmr2->curfreq = (f->frequency / 200) * 200; /* set card freq (if not muted) */ if (fmr2->curvol && !fmr2->mute) { mutex_lock(&fmr2->lock); fmr2_setfreq(fmr2); mutex_unlock(&fmr2->lock); } return 0; } static int vidioc_g_frequency(struct file *file, void *priv, struct v4l2_frequency *f) { struct fmr2 *fmr2 = video_drvdata(file); if (f->tuner != 0) return -EINVAL; f->type = V4L2_TUNER_RADIO; f->frequency = fmr2->curfreq; return 0; } static int vidioc_queryctrl(struct file *file, void *priv, struct v4l2_queryctrl *qc) { struct fmr2 *fmr2 = video_drvdata(file); switch (qc->id) { case V4L2_CID_AUDIO_MUTE: return v4l2_ctrl_query_fill(qc, 0, 1, 1, 1); case V4L2_CID_AUDIO_VOLUME: /* Only card_type == 11 implements volume */ if (fmr2->card_type == 11) return v4l2_ctrl_query_fill(qc, 0, 15, 1, 0); return v4l2_ctrl_query_fill(qc, 0, 1, 1, 0); } return -EINVAL; } static int vidioc_g_ctrl(struct file *file, void *priv, struct v4l2_control *ctrl) { struct fmr2 *fmr2 = video_drvdata(file); switch (ctrl->id) { case V4L2_CID_AUDIO_MUTE: ctrl->value = fmr2->mute; return 0; case V4L2_CID_AUDIO_VOLUME: ctrl->value = fmr2->curvol; return 0; } return -EINVAL; } static int vidioc_s_ctrl(struct file *file, void *priv, struct v4l2_control *ctrl) { struct fmr2 *fmr2 = video_drvdata(file); switch (ctrl->id) { case V4L2_CID_AUDIO_MUTE: fmr2->mute = ctrl->value; break; case V4L2_CID_AUDIO_VOLUME: fmr2->curvol = ctrl->value; break; default: return -EINVAL; } #ifdef DEBUG if (fmr2->curvol && !fmr2->mute) printk(KERN_DEBUG "unmute\n"); else printk(KERN_DEBUG "mute\n"); #endif mutex_lock(&fmr2->lock); if (fmr2->curvol && !fmr2->mute) { fmr2_setvolume(fmr2); /* Set frequency and unmute card */ fmr2_setfreq(fmr2); } else fmr2_mute(fmr2->io); mutex_unlock(&fmr2->lock); return 0; } static int vidioc_g_input(struct file *filp, void *priv, unsigned int *i) { *i = 0; return 0; } static int vidioc_s_input(struct file *filp, void *priv, unsigned int i) { return i ? -EINVAL : 0; } static int vidioc_g_audio(struct file *file, void *priv, struct v4l2_audio *a) { a->index = 0; strlcpy(a->name, "Radio", sizeof(a->name)); a->capability = V4L2_AUDCAP_STEREO; return 0; } static int vidioc_s_audio(struct file *file, void *priv, struct v4l2_audio *a) { return a->index ? -EINVAL : 0; } static const struct v4l2_file_operations fmr2_fops = { .owner = THIS_MODULE, .unlocked_ioctl = video_ioctl2, }; static const struct v4l2_ioctl_ops fmr2_ioctl_ops = { .vidioc_querycap = vidioc_querycap, .vidioc_g_tuner = vidioc_g_tuner, .vidioc_s_tuner = vidioc_s_tuner, .vidioc_g_audio = vidioc_g_audio, .vidioc_s_audio = vidioc_s_audio, .vidioc_g_input = vidioc_g_input, .vidioc_s_input = vidioc_s_input, .vidioc_g_frequency = vidioc_g_frequency, .vidioc_s_frequency = vidioc_s_frequency, .vidioc_queryctrl = vidioc_queryctrl, .vidioc_g_ctrl = vidioc_g_ctrl, .vidioc_s_ctrl = vidioc_s_ctrl, }; static int __init fmr2_init(void) { struct fmr2 *fmr2 = &fmr2_card; struct v4l2_device *v4l2_dev = &fmr2->v4l2_dev; int res; strlcpy(v4l2_dev->name, "sf16fmr2", sizeof(v4l2_dev->name)); fmr2->io = io; fmr2->stereo = 1; mutex_init(&fmr2->lock); if (!request_region(fmr2->io, 2, "sf16fmr2")) { v4l2_err(v4l2_dev, "request_region failed!\n"); return -EBUSY; } res = v4l2_device_register(NULL, v4l2_dev); if (res < 0) { release_region(fmr2->io, 2); v4l2_err(v4l2_dev, "Could not register v4l2_device\n"); return res; } strlcpy(fmr2->vdev.name, v4l2_dev->name, sizeof(fmr2->vdev.name)); fmr2->vdev.v4l2_dev = v4l2_dev; fmr2->vdev.fops = &fmr2_fops; fmr2->vdev.ioctl_ops = &fmr2_ioctl_ops; fmr2->vdev.release = video_device_release_empty; video_set_drvdata(&fmr2->vdev, fmr2); /* mute card - prevents noisy bootups */ fmr2_mute(fmr2->io); fmr2_product_info(fmr2); if (video_register_device(&fmr2->vdev, VFL_TYPE_RADIO, radio_nr) < 0) { v4l2_device_unregister(v4l2_dev); release_region(fmr2->io, 2); return -EINVAL; } v4l2_info(v4l2_dev, "SF16FMR2 radio card driver at 0x%x.\n", fmr2->io); debug_print((KERN_DEBUG "card_type %d\n", fmr2->card_type)); return 0; } static void __exit fmr2_exit(void) { struct fmr2 *fmr2 = &fmr2_card; video_unregister_device(&fmr2->vdev); v4l2_device_unregister(&fmr2->v4l2_dev); release_region(fmr2->io, 2); } module_init(fmr2_init); module_exit(fmr2_exit); #ifndef MODULE static int __init fmr2_setup_io(char *str) { get_option(&str, &io); return 1; } __setup("sf16fmr2=", fmr2_setup_io); #endif