/*
* acpi_thermal.c - ACPI Thermal Zone Driver ($Revision: 41 $)
*
* Copyright (C) 2001, 2002 Andy Grover <andrew.grover@intel.com>
* Copyright (C) 2001, 2002 Paul Diefenbaugh <paul.s.diefenbaugh@intel.com>
*
* ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or (at
* your option) any later version.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* General Public License for more details.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
*
* ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
*
* This driver fully implements the ACPI thermal policy as described in the
* ACPI 2.0 Specification.
*
* TBD: 1. Implement passive cooling hysteresis.
* 2. Enhance passive cooling (CPU) states/limit interface to support
* concepts of 'multiple limiters', upper/lower limits, etc.
*
*/
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/dmi.h>
#include <linux/init.h>
#include <linux/slab.h>
#include <linux/types.h>
#include <linux/jiffies.h>
#include <linux/kmod.h>
#include <linux/reboot.h>
#include <linux/device.h>
#include <asm/uaccess.h>
#include <linux/thermal.h>
#include <acpi/acpi_bus.h>
#include <acpi/acpi_drivers.h>
#define PREFIX "ACPI: "
#define ACPI_THERMAL_CLASS "thermal_zone"
#define ACPI_THERMAL_DEVICE_NAME "Thermal Zone"
#define ACPI_THERMAL_FILE_STATE "state"
#define ACPI_THERMAL_FILE_TEMPERATURE "temperature"
#define ACPI_THERMAL_FILE_TRIP_POINTS "trip_points"
#define ACPI_THERMAL_FILE_COOLING_MODE "cooling_mode"
#define ACPI_THERMAL_FILE_POLLING_FREQ "polling_frequency"
#define ACPI_THERMAL_NOTIFY_TEMPERATURE 0x80
#define ACPI_THERMAL_NOTIFY_THRESHOLDS 0x81
#define ACPI_THERMAL_NOTIFY_DEVICES 0x82
#define ACPI_THERMAL_NOTIFY_CRITICAL 0xF0
#define ACPI_THERMAL_NOTIFY_HOT 0xF1
#define ACPI_THERMAL_MODE_ACTIVE 0x00
#define ACPI_THERMAL_MAX_ACTIVE 10
#define ACPI_THERMAL_MAX_LIMIT_STR_LEN 65
#define _COMPONENT ACPI_THERMAL_COMPONENT
ACPI_MODULE_NAME("thermal");
MODULE_AUTHOR("Paul Diefenbaugh");
MODULE_DESCRIPTION("ACPI Thermal Zone Driver");
MODULE_LICENSE("GPL");
static int act;
module_param(act, int, 0644);
MODULE_PARM_DESC(act, "Disable or override all lowest active trip points.");
static int crt;
module_param(crt, int, 0644);
MODULE_PARM_DESC(crt, "Disable or lower all critical trip points.");
static int tzp;
module_param(tzp, int, 0444);
MODULE_PARM_DESC(tzp, "Thermal zone polling frequency, in 1/10 seconds.");
static int nocrt;
module_param(nocrt, int, 0);
MODULE_PARM_DESC(nocrt, "Set to take no action upon ACPI thermal zone critical trips points.");
static int off;
module_param(off, int, 0);
MODULE_PARM_DESC(off, "Set to disable ACPI thermal support.");
static int psv;
module_param(psv, int, 0644);
MODULE_PARM_DESC(psv, "Disable or override all passive trip points.");
static int acpi_thermal_add(struct acpi_device *device);
static int acpi_thermal_remove(struct acpi_device *device, int type);
static int acpi_thermal_resume(struct acpi_device *device);
static void acpi_thermal_notify(struct acpi_device *device, u32 event);
static const struct acpi_device_id thermal_device_ids[] = {
{ACPI_THERMAL_HID, 0},
{"", 0},
};
MODULE_DEVICE_TABLE(acpi, thermal_device_ids);
static struct acpi_driver acpi_thermal_driver = {
.name = "thermal",
.class = ACPI_THERMAL_CLASS,
.ids = thermal_device_ids,
.ops = {
.add = acpi_thermal_add,
.remove = acpi_thermal_remove,
.resume = acpi_thermal_resume,
.notify = acpi_thermal_notify,
},
};
struct acpi_thermal_state {
u8 critical:1;
u8 hot:1;
u8 passive:1;
u8 active:1;
u8 reserved:4;
int active_index;
};
struct acpi_thermal_state_flags {
u8 valid:1;
u8 enabled:1;
u8 reserved:6;
};
struct acpi_thermal_critical {
struct acpi_thermal_state_flags flags;
unsigned long temperature;
};
struct acpi_thermal_hot {
struct acpi_thermal_state_flags flags;
unsigned long temperature;
};
struct acpi_thermal_passive {
struct acpi_thermal_state_flags flags;
unsigned long temperature;
unsigned long tc1;
unsigned long tc2;
unsigned long tsp;
struct acpi_handle_list devices;
};
struct acpi_thermal_active {
struct acpi_thermal_state_flags flags;
unsigned long temperature;
struct acpi_handle_list devices;
};
struct acpi_thermal_trips {
struct acpi_thermal_critical critical;
struct acpi_thermal_hot hot;
struct acpi_thermal_passive passive;
struct acpi_thermal_active active[ACPI_THERMAL_MAX_ACTIVE];
};
struct acpi_thermal_flags {
u8 cooling_mode:1; /* _SCP */
u8 devices:1; /* _TZD */
u8 reserved:6;
};
struct acpi_thermal {
struct acpi_device * device;
acpi_bus_id name;
unsigned long temperature;
unsigned long last_temperature;
unsigned long polling_frequency;
volatile u8 zombie;
struct acpi_thermal_flags flags;
struct acpi_thermal_state state;
struct acpi_thermal_trips trips;
struct acpi_handle_list devices;
struct thermal_zone_device *thermal_zone;
int tz_enabled;
int kelvin_offset;
struct mutex lock;
};
/* --------------------------------------------------------------------------
Thermal Zone Management
-------------------------------------------------------------------------- */
static int acpi_thermal_get_temperature(struct acpi_thermal *tz)
{
acpi_status status = AE_OK;
unsigned long long tmp;
if (!tz)
return -EINVAL;
tz->last_temperature = tz->temperature;
status = acpi_evaluate_integer(tz->device->handle, "_TMP", NULL, &tmp);
if (ACPI_FAILURE(status))
return -ENODEV;
tz->temperature = tmp;
ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Temperature is %lu dK\n",
tz->temperature));
return 0;
}
static int acpi_thermal_get_polling_frequency(struct acpi_thermal *tz)
{
acpi_status status = AE_OK;
unsigned long long tmp;
if (!tz)
return -EINVAL;
status = acpi_evaluate_integer(tz->device->handle, "_TZP", NULL, &tmp);
if (ACPI_FAILURE(status))
return -ENODEV;
tz->polling_frequency = tmp;
ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Polling frequency is %lu dS\n",
tz->polling_frequency));
return 0;
}
static int acpi_thermal_set_cooling_mode(struct acpi_thermal *tz, int mode)
{
acpi_status status = AE_OK;
union acpi_object arg0 = { ACPI_TYPE_INTEGER };
struct acpi_object_list arg_list = { 1, &arg0 };
acpi_handle handle = NULL;
if (!tz)
return -EINVAL;
status = acpi_get_handle(tz->device->handle, "_SCP", &handle);
if (ACPI_FAILURE(status)) {
ACPI_DEBUG_PRINT((ACPI_DB_INFO, "_SCP not present\n"));
return -ENODEV;
}
arg0.integer.value = mode;
status = acpi_evaluate_object(handle, NULL, &arg_list, NULL);
if (ACPI_FAILURE(status))
return -ENODEV;
return 0;
}
#define ACPI_TRIPS_CRITICAL 0x01
#define ACPI_TRIPS_HOT 0x02
#define ACPI_TRIPS_PASSIVE 0x04
#define ACPI_TRIPS_ACTIVE 0x08
#define ACPI_TRIPS_DEVICES 0x10
#define ACPI_TRIPS_REFRESH_THRESHOLDS (ACPI_TRIPS_PASSIVE | ACPI_TRIPS_ACTIVE)
#define ACPI_TRIPS_REFRESH_DEVICES ACPI_TRIPS_DEVICES
#define ACPI_TRIPS_INIT (ACPI_TRIPS_CRITICAL | ACPI_TRIPS_HOT | \
ACPI_TRIPS_PASSIVE | ACPI_TRIPS_ACTIVE | \
ACPI_TRIPS_DEVICES)
/*
* This exception is thrown out in two cases:
* 1.An invalid trip point becomes invalid or a valid trip point becomes invalid
* when re-evaluating the AML code.
* 2.TODO: Devices listed in _PSL, _ALx, _TZD may change.
* We need to re-bind the cooling devices of a thermal zone when this occurs.
*/
#define ACPI_THERMAL_TRIPS_EXCEPTION(flags, str) \
do { \
if (flags != ACPI_TRIPS_INIT) \
ACPI_EXCEPTION((AE_INFO, AE_ERROR, \
"ACPI thermal trip point %s changed\n" \
"Please send acpidump to linux-acpi@vger.kernel.org\n", str)); \
} while (0)
static int acpi_thermal_trips_update(struct acpi_thermal *tz, int flag)
{
acpi_status status = AE_OK;
unsigned long long tmp;
struct acpi_handle_list devices;
int valid = 0;
int i;
/* Critical Shutdown */
if (flag & ACPI_TRIPS_CRITICAL) {
status = acpi_evaluate_integer(tz->device->handle,
"_CRT", NULL, &tmp);
tz->trips.critical.temperature = tmp;
/*
* Treat freezing temperatures as invalid as well; some
* BIOSes return really low values and cause reboots at startup.
* Below zero (Celsius) values clearly aren't right for sure..
* ... so lets discard those as invalid.
*/
if (ACPI_FAILURE(status)) {
tz->trips.critical.flags.valid = 0;
ACPI_DEBUG_PRINT((ACPI_DB_INFO,
"No critical threshold\n"));
} else if (tmp <= 2732) {
printk(KERN_WARNING FW_BUG "Invalid critical threshold "
"(%llu)\n", tmp);
tz->trips.critical.flags.valid = 0;
} else {
tz->trips.critical.flags.valid = 1;
ACPI_DEBUG_PRINT((ACPI_DB_INFO,
"Found critical threshold [%lu]\n",
tz->trips.critical.temperature));
}
if (tz->trips.critical.flags.valid == 1) {
if (crt == -1) {
tz->trips.critical.flags.valid = 0;
} else if (crt > 0) {
unsigned long crt_k = CELSIUS_TO_KELVIN(crt);
/*
* Allow override critical threshold
*/
if (crt_k > tz->trips.critical.temperature)
printk(KERN_WARNING PREFIX
"Critical threshold %d C\n", crt);
tz->trips.critical.temperature = crt_k;
}
}
}
/* Critical Sleep (optional) */
if (flag & ACPI_TRIPS_HOT) {
status = acpi_evaluate_integer(tz->device->handle,
"_HOT", NULL, &tmp);
if (ACPI_FAILURE(status)) {
tz->trips.hot.flags.valid = 0;
ACPI_DEBUG_PRINT((ACPI_DB_INFO,
"No hot threshold\n"));
} else {
tz->trips.hot.temperature = tmp;
tz->trips.hot.flags.valid = 1;
ACPI_DEBUG_PRINT((ACPI_DB_INFO,
"Found hot threshold [%lu]\n",
tz->trips.critical.temperature));
}
}
/* Passive (optional) */
if (((flag & ACPI_TRIPS_PASSIVE) && tz->trips.passive.flags.valid) ||
(flag == ACPI_TRIPS_INIT)) {
valid = tz->trips.passive.flags.valid;
if (psv == -1) {
status = AE_SUPPORT;
} else if (psv > 0) {
tmp = CELSIUS_TO_KELVIN(psv);
status = AE_OK;
} else {
status = acpi_evaluate_integer(tz->device->handle,
"_PSV", NULL, &tmp);
}
if (ACPI_FAILURE(status))
tz->trips.passive.flags.valid = 0;
else {
tz->trips.passive.temperature = tmp;
tz->trips.passive.flags.valid = 1;
if (flag == ACPI_TRIPS_INIT) {
status = acpi_evaluate_integer(
tz->device->handle, "_TC1",
NULL, &tmp);
if (ACPI_FAILURE(status))
tz->trips.passive.flags.valid = 0;
else
tz->trips.passive.tc1 = tmp;
status = acpi_evaluate_integer(
tz->device->handle, "_TC2",
NULL, &tmp);
if (ACPI_FAILURE(status))
tz->trips.passive.flags.valid = 0;
else
tz->trips.passive.tc2 = tmp;
status = acpi_evaluate_integer(
tz->device->handle, "_TSP",
NULL, &tmp);
if (ACPI_FAILURE(status))
tz->trips.passive.flags.valid = 0;
else
tz->trips.passive.tsp = tmp;
}
}
}
if ((flag & ACPI_TRIPS_DEVICES) && tz->trips.passive.flags.valid) {
memset(&devices, 0, sizeof(struct acpi_handle_list));
status = acpi_evaluate_reference(tz->device->handle, "_PSL",
NULL, &devices);
if (ACPI_FAILURE(status)) {
printk(KERN_WARNING PREFIX
"Invalid passive threshold\n");
tz->trips.passive.flags.valid = 0;
}
else
tz->trips.passive.flags.valid = 1;
if (memcmp(&tz->trips.passive.devices, &devices,
sizeof(struct acpi_handle_list))) {
memcpy(&tz->trips.passive.devices, &devices,
sizeof(struct acpi_handle_list));
ACPI_THERMAL_TRIPS_EXCEPTION(flag, "device");
}
}
if ((flag & ACPI_TRIPS_PASSIVE) || (flag & ACPI_TRIPS_DEVICES)) {
if (valid != tz->trips.passive.flags.valid)
ACPI_THERMAL_TRIPS_EXCEPTION(flag, "state");
}
/* Active (optional) */
for (i = 0; i < ACPI_THERMAL_MAX_ACTIVE; i++) {
char name[5] = { '_', 'A', 'C', ('0' + i), '\0' };
valid = tz->trips.active[i].flags.valid;
if (act == -1)
break; /* disable all active trip points */
if ((flag == ACPI_TRIPS_INIT) || ((flag & ACPI_TRIPS_ACTIVE) &&
tz->trips.active[i].flags.valid)) {
status = acpi_evaluate_integer(tz->device->handle,
name, NULL, &tmp);
if (ACPI_FAILURE(status)) {
tz->trips.active[i].flags.valid = 0;
if (i == 0)
break;
if (act <= 0)
break;
if (i == 1)
tz->trips.active[0].temperature =
CELSIUS_TO_KELVIN(act);
else
/*
* Don't allow override higher than
* the next higher trip point
*/
tz->trips.active[i - 1].temperature =
(tz->trips.active[i - 2].temperature <
CELSIUS_TO_KELVIN(act) ?
tz->trips.active[i - 2].temperature :
CELSIUS_TO_KELVIN(act));
break;
} else {
tz->trips.active[i].temperature = tmp;
tz->trips.active[i].flags.valid = 1;
}
}
name[2] = 'L';
if ((flag & ACPI_TRIPS_DEVICES) && tz->trips.active[i].flags.valid ) {
memset(&devices, 0, sizeof(struct acpi_handle_list));
status = acpi_evaluate_reference(tz->device->handle,
name, NULL, &devices);
if (ACPI_FAILURE(status)) {
printk(KERN_WARNING PREFIX
"Invalid active%d threshold\n", i);
tz->trips.active[i].flags.valid = 0;
}
else
tz->trips.active[i].flags.valid = 1;
if (memcmp(&tz->trips.active[i].devices, &devices,
sizeof(struct acpi_handle_list))) {
memcpy(&tz->trips.active[i].devices, &devices,
sizeof(struct acpi_handle_list));
ACPI_THERMAL_TRIPS_EXCEPTION(flag, "device");
}
}
if ((flag & ACPI_TRIPS_ACTIVE) || (flag & ACPI_TRIPS_DEVICES))
if (valid != tz->trips.active[i].flags.valid)
ACPI_THERMAL_TRIPS_EXCEPTION(flag, "state");
if (!tz->trips.active[i].flags.valid)
break;
}
if (flag & ACPI_TRIPS_DEVICES) {
memset(&devices, 0, sizeof(struct acpi_handle_list));
status = acpi_evaluate_reference(tz->device->handle, "_TZD",
NULL, &devices);
if (memcmp(&tz->devices, &devices,
sizeof(struct acpi_handle_list))) {
memcpy(&tz->devices, &devices,
sizeof(struct acpi_handle_list));
ACPI_THERMAL_TRIPS_EXCEPTION(flag, "device");
}
}
return 0;
}
static int acpi_thermal_get_trip_points(struct acpi_thermal *tz)
{
int i, valid, ret = acpi_thermal_trips_update(tz, ACPI_TRIPS_INIT);
if (ret)
return ret;
valid = tz->trips.critical.flags.valid |
tz->trips.hot.flags.valid |
tz->trips.passive.flags.valid;
for (i = 0; i < ACPI_THERMAL_MAX_ACTIVE; i++)
valid |= tz->trips.active[i].flags.valid;
if (!valid) {
printk(KERN_WARNING FW_BUG "No valid trip found\n");
return -ENODEV;
}
return 0;
}
static void acpi_thermal_check(void *data)
{
struct acpi_thermal *tz = data;
thermal_zone_device_update(tz->thermal_zone);
}
/* sys I/F for generic thermal sysfs support */
#define KELVIN_TO_MILLICELSIUS(t, off) (((t) - (off)) * 100)
static int thermal_get_temp(struct thermal_zone_device *thermal,
unsigned long *temp)
{
struct acpi_thermal *tz = thermal->devdata;
int result;
if (!tz)
return -EINVAL;
result = acpi_thermal_get_temperature(tz);
if (result)
return result;
*temp = KELVIN_TO_MILLICELSIUS(tz->temperature, tz->kelvin_offset);
return 0;
}
static const char enabled[] = "kernel";
static const char disabled[] = "user";
static int thermal_get_mode(struct thermal_zone_device *thermal,
enum thermal_device_mode *mode)
{
struct acpi_thermal *tz = thermal->devdata;
if (!tz)
return -EINVAL;
*mode = tz->tz_enabled ? THERMAL_DEVICE_ENABLED :
THERMAL_DEVICE_DISABLED;
return 0;
}
static int thermal_set_mode(struct thermal_zone_device *thermal,
enum thermal_device_mode mode)
{
struct acpi_thermal *tz = thermal->devdata;
int enable;
if (!tz)
return -EINVAL;
/*
* enable/disable thermal management from ACPI thermal driver
*/
if (mode == THERMAL_DEVICE_ENABLED)
enable = 1;
else if (mode == THERMAL_DEVICE_DISABLED)
enable = 0;
else
return -EINVAL;
if (enable != tz->tz_enabled) {
tz->tz_enabled = enable;
ACPI_DEBUG_PRINT((ACPI_DB_INFO,
"%s ACPI thermal control\n",
tz->tz_enabled ? enabled : disabled));
acpi_thermal_check(tz);
}
return 0;
}
static int thermal_get_trip_type(struct thermal_zone_device *thermal,
int trip, enum thermal_trip_type *type)
{
struct acpi_thermal *tz = thermal->devdata;
int i;
if (!tz || trip < 0)
return -EINVAL;
if (tz->trips.critical.flags.valid) {
if (!trip) {
*type = THERMAL_TRIP_CRITICAL;
return 0;
}
trip--;
}
if (tz->trips.hot.flags.valid) {
if (!trip) {
*type = THERMAL_TRIP_HOT;
return 0;
}
trip--;
}
if (tz->trips.passive.flags.valid) {
if (!trip) {
*type = THERMAL_TRIP_PASSIVE;
return 0;
}
trip--;
}
for (i = 0; i < ACPI_THERMAL_MAX_ACTIVE &&
tz->trips.active[i].flags.valid; i++) {
if (!trip) {
*type = THERMAL_TRIP_ACTIVE;
return 0;
}
trip--;
}
return -EINVAL;
}
static int thermal_get_trip_temp(struct thermal_zone_device *thermal,
int trip, unsigned long *temp)
{
struct acpi_thermal *tz = thermal->devdata;
int i;
if (!tz || trip < 0)
return -EINVAL;
if (tz->trips.critical.flags.valid) {
if (!trip) {
*temp = KELVIN_TO_MILLICELSIUS(
tz->trips.critical.temperature,
tz->kelvin_offset);
return 0;
}
trip--;
}
if (tz->trips.hot.flags.valid) {
if (!trip) {
*temp = KELVIN_TO_MILLICELSIUS(
tz->trips.hot.temperature,
tz->kelvin_offset);
return 0;
}
trip--;
}
if (tz->trips.passive.flags.valid) {
if (!trip) {
*temp = KELVIN_TO_MILLICELSIUS(
tz->trips.passive.temperature,
tz->kelvin_offset);
return 0;
}
trip--;
}
for (i = 0; i < ACPI_THERMAL_MAX_ACTIVE &&
tz->trips.active[i].flags.valid; i++) {
if (!trip) {
*temp = KELVIN_TO_MILLICELSIUS(
tz->trips.active[i].temperature,
tz->kelvin_offset);
return 0;
}
trip--;
}
return -EINVAL;
}
static int thermal_get_crit_temp(struct thermal_zone_device *thermal,
unsigned long *temperature) {
struct acpi_thermal *tz = thermal->devdata;
if (tz->trips.critical.flags.valid) {
*temperature = KELVIN_TO_MILLICELSIUS(
tz->trips.critical.temperature,
tz->kelvin_offset);
return 0;
} else
return -EINVAL;
}
static int thermal_notify(struct thermal_zone_device *thermal, int trip,
enum thermal_trip_type trip_type)
{
u8 type = 0;
struct acpi_thermal *tz = thermal->devdata;
if (trip_type == THERMAL_TRIP_CRITICAL)
type = ACPI_THERMAL_NOTIFY_CRITICAL;
else if (trip_type == THERMAL_TRIP_HOT)
type = ACPI_THERMAL_NOTIFY_HOT;
else
return 0;
acpi_bus_generate_proc_event(tz->device, type, 1);
acpi_bus_generate_netlink_event(tz->device->pnp.device_class,
dev_name(&tz->device->dev), type, 1);
if (trip_type == THERMAL_TRIP_CRITICAL && nocrt)
return 1;
return 0;
}
typedef int (*cb)(struct thermal_zone_device *, int,
struct thermal_cooling_device *);
static int acpi_thermal_cooling_device_cb(struct thermal_zone_device *thermal,
struct thermal_cooling_device *cdev,
cb action)
{
struct acpi_device *device = cdev->devdata;
struct acpi_thermal *tz = thermal->devdata;
struct acpi_device *dev;
acpi_status status;
acpi_handle handle;
int i;
int j;
int trip = -1;
int result = 0;
if (tz->trips.critical.flags.valid)
trip++;
if (tz->trips.hot.flags.valid)
trip++;
if (tz->trips.passive.flags.valid) {
trip++;
for (i = 0; i < tz->trips.passive.devices.count;
i++) {
handle = tz->trips.passive.devices.handles[i];
status = acpi_bus_get_device(handle, &dev);
if (ACPI_SUCCESS(status) && (dev == device)) {
result = action(thermal, trip, cdev);
if (result)
goto failed;
}
}
}
for (i = 0; i < ACPI_THERMAL_MAX_ACTIVE; i++) {
if (!tz->trips.active[i].flags.valid)
break;
trip++;
for (j = 0;
j < tz->trips.active[i].devices.count;
j++) {
handle = tz->trips.active[i].devices.handles[j];
status = acpi_bus_get_device(handle, &dev);
if (ACPI_SUCCESS(status) && (dev == device)) {
result = action(thermal, trip, cdev);
if (result)
goto failed;
}
}
}
for (i = 0; i < tz->devices.count; i++) {
handle = tz->devices.handles[i];
status = acpi_bus_get_device(handle, &dev);
if (ACPI_SUCCESS(status) && (dev == device)) {
result = action(thermal, -1, cdev);
if (result)
goto failed;
}
}
failed:
return result;
}
static int
acpi_thermal_bind_cooling_device(struct thermal_zone_device *thermal,
struct thermal_cooling_device *cdev)
{
return acpi_thermal_cooling_device_cb(thermal, cdev,
thermal_zone_bind_cooling_device);
}
static int
acpi_thermal_unbind_cooling_device(struct thermal_zone_device *thermal,
struct thermal_cooling_device *cdev)
{
return acpi_thermal_cooling_device_cb(thermal, cdev,
thermal_zone_unbind_cooling_device);
}
static struct thermal_zone_device_ops acpi_thermal_zone_ops = {
.bind = acpi_thermal_bind_cooling_device,
.unbind = acpi_thermal_unbind_cooling_device,
.get_temp = thermal_get_temp,
.get_mode = thermal_get_mode,
.set_mode = thermal_set_mode,
.get_trip_type = thermal_get_trip_type,
.get_trip_temp = thermal_get_trip_temp,
.get_crit_temp = thermal_get_crit_temp,
.notify = thermal_notify,
};
static int acpi_thermal_register_thermal_zone(struct acpi_thermal *tz)
{
int trips = 0;
int result;
acpi_status status;
int i;
if (tz->trips.critical.flags.valid)
trips++;
if (tz->trips.hot.flags.valid)
trips++;
if (tz->trips.passive.flags.valid)
trips++;
for (i = 0; i < ACPI_THERMAL_MAX_ACTIVE &&
tz->trips.active[i].flags.valid; i++, trips++);
if (tz->trips.passive.flags.valid)
tz->thermal_zone =
thermal_zone_device_register("acpitz", trips, tz,
&acpi_thermal_zone_ops,
tz->trips.passive.tc1,
tz->trips.passive.tc2,
tz->trips.passive.tsp*100,
tz->polling_frequency*100);
else
tz->thermal_zone =
thermal_zone_device_register("acpitz", trips, tz,
&acpi_thermal_zone_ops,
0, 0, 0,
tz->polling_frequency*100);
if (IS_ERR(tz->thermal_zone))
return -ENODEV;
result = sysfs_create_link(&tz->device->dev.kobj,
&tz->thermal_zone->device.kobj, "thermal_zone");
if (result)
return result;
result = sysfs_create_link(&tz->thermal_zone->device.kobj,
&tz->device->dev.kobj, "device");
if (result)
return result;
status = acpi_attach_data(tz->device->handle,
acpi_bus_private_data_handler,
tz->thermal_zone);
if (ACPI_FAILURE(status)) {
printk(KERN_ERR PREFIX
"Error attaching device data\n");
return -ENODEV;
}
tz->tz_enabled = 1;
dev_info(&tz->device->dev, "registered as thermal_zone%d\n",
tz->thermal_zone->id);
return 0;
}
static void acpi_thermal_unregister_thermal_zone(struct acpi_thermal *tz)
{
sysfs_remove_link(&tz->device->dev.kobj, "thermal_zone");
sysfs_remove_link(&tz->thermal_zone->device.kobj, "device");
thermal_zone_device_unregister(tz->thermal_zone);
tz->thermal_zone = NULL;
acpi_detach_data(tz->device->handle, acpi_bus_private_data_handler);
}
/* --------------------------------------------------------------------------
Driver Interface
-------------------------------------------------------------------------- */
static void acpi_thermal_notify(struct acpi_device *device, u32 event)
{
struct acpi_thermal *tz = acpi_driver_data(device);
if (!tz)
return;
switch (event) {
case ACPI_THERMAL_NOTIFY_TEMPERATURE:
acpi_thermal_check(tz);
break;
case ACPI_THERMAL_NOTIFY_THRESHOLDS:
acpi_thermal_trips_update(tz, ACPI_TRIPS_REFRESH_THRESHOLDS);
acpi_thermal_check(tz);
acpi_bus_generate_proc_event(device, event, 0);
acpi_bus_generate_netlink_event(device->pnp.device_class,
dev_name(&device->dev), event, 0);
break;
case ACPI_THERMAL_NOTIFY_DEVICES:
acpi_thermal_trips_update(tz, ACPI_TRIPS_REFRESH_DEVICES);
acpi_thermal_check(tz);
acpi_bus_generate_proc_event(device, event, 0);
acpi_bus_generate_netlink_event(device->pnp.device_class,
dev_name(&device->dev), event, 0);
break;
default:
ACPI_DEBUG_PRINT((ACPI_DB_INFO,
"Unsupported event [0x%x]\n", event));
break;
}
}
static int acpi_thermal_get_info(struct acpi_thermal *tz)
{
int result = 0;
if (!tz)
return -EINVAL;
/* Get temperature [_TMP] (required) */
result = acpi_thermal_get_temperature(tz);
if (result)
return result;
/* Get trip points [_CRT, _PSV, etc.] (required) */
result = acpi_thermal_get_trip_points(tz);
if (result)
return result;
/* Set the cooling mode [_SCP] to active cooling (default) */
result = acpi_thermal_set_cooling_mode(tz, ACPI_THERMAL_MODE_ACTIVE);
if (!result)
tz->flags.cooling_mode = 1;
/* Get default polling frequency [_TZP] (optional) */
if (tzp)
tz->polling_frequency = tzp;
else
acpi_thermal_get_polling_frequency(tz);
return 0;
}
/*
* The exact offset between Kelvin and degree Celsius is 273.15. However ACPI
* handles temperature values with a single decimal place. As a consequence,
* some implementations use an offset of 273.1 and others use an offset of
* 273.2. Try to find out which one is being used, to present the most
* accurate and visually appealing number.
*
* The heuristic below should work for all ACPI thermal zones which have a
* critical trip point with a value being a multiple of 0.5 degree Celsius.
*/
static void acpi_thermal_guess_offset(struct acpi_thermal *tz)
{
if (tz->trips.critical.flags.valid &&
(tz->trips.critical.temperature % 5) == 1)
tz->kelvin_offset = 2731;
else
tz->kelvin_offset = 2732;
}
static int acpi_thermal_add(struct acpi_device *device)
{
int result = 0;
struct acpi_thermal *tz = NULL;
if (!device)
return -EINVAL;
tz = kzalloc(sizeof(struct acpi_thermal), GFP_KERNEL);
if (!tz)
return -ENOMEM;
tz->device = device;
strcpy(tz->name, device->pnp.bus_id);
strcpy(acpi_device_name(device), ACPI_THERMAL_DEVICE_NAME);
strcpy(acpi_device_class(device), ACPI_THERMAL_CLASS);
device->driver_data = tz;
mutex_init(&tz->lock);
result = acpi_thermal_get_info(tz);
if (result)
goto free_memory;
acpi_thermal_guess_offset(tz);
result = acpi_thermal_register_thermal_zone(tz);
if (result)
goto free_memory;
printk(KERN_INFO PREFIX "%s [%s] (%ld C)\n",
acpi_device_name(device), acpi_device_bid(device),
KELVIN_TO_CELSIUS(tz->temperature));
goto end;
free_memory:
kfree(tz);
end:
return result;
}
static int acpi_thermal_remove(struct acpi_device *device, int type)
{
struct acpi_thermal *tz = NULL;
if (!device || !acpi_driver_data(device))
return -EINVAL;
tz = acpi_driver_data(device);
acpi_thermal_unregister_thermal_zone(tz);
mutex_destroy(&tz->lock);
kfree(tz);
return 0;
}
static int acpi_thermal_resume(struct acpi_device *device)
{
struct acpi_thermal *tz = NULL;
int i, j, power_state, result;
if (!device || !acpi_driver_data(device))
return -EINVAL;
tz = acpi_driver_data(device);
for (i = 0; i < ACPI_THERMAL_MAX_ACTIVE; i++) {
if (!(&tz->trips.active[i]))
break;
if (!tz->trips.active[i].flags.valid)
break;
tz->trips.active[i].flags.enabled = 1;
for (j = 0; j < tz->trips.active[i].devices.count; j++) {
result = acpi_bus_update_power(
tz->trips.active[i].devices.handles[j],
&power_state);
if (result || (power_state != ACPI_STATE_D0)) {
tz->trips.active[i].flags.enabled = 0;
break;
}
}
tz->state.active |= tz->trips.active[i].flags.enabled;
}
acpi_thermal_check(tz);
return AE_OK;
}
static int thermal_act(const struct dmi_system_id *d) {
if (act == 0) {
printk(KERN_NOTICE "ACPI: %s detected: "
"disabling all active thermal trip points\n", d->ident);
act = -1;
}
return 0;
}
static int thermal_nocrt(const struct dmi_system_id *d) {
printk(KERN_NOTICE "ACPI: %s detected: "
"disabling all critical thermal trip point actions.\n", d->ident);
nocrt = 1;
return 0;
}
static int thermal_tzp(const struct dmi_system_id *d) {
if (tzp == 0) {
printk(KERN_NOTICE "ACPI: %s detected: "
"enabling thermal zone polling\n", d->ident);
tzp = 300; /* 300 dS = 30 Seconds */
}
return 0;
}
static int thermal_psv(const struct dmi_system_id *d) {
if (psv == 0) {
printk(KERN_NOTICE "ACPI: %s detected: "
"disabling all passive thermal trip points\n", d->ident);
psv = -1;
}
return 0;
}
static struct dmi_system_id thermal_dmi_table[] __initdata = {
/*
* Award BIOS on this AOpen makes thermal control almost worthless.
* http://bugzilla.kernel.org/show_bug.cgi?id=8842
*/
{
.callback = thermal_act,
.ident = "AOpen i915GMm-HFS",
.matches = {
DMI_MATCH(DMI_BOARD_VENDOR, "AOpen"),
DMI_MATCH(DMI_BOARD_NAME, "i915GMm-HFS"),
},
},
{
.callback = thermal_psv,
.ident = "AOpen i915GMm-HFS",
.matches = {
DMI_MATCH(DMI_BOARD_VENDOR, "AOpen"),
DMI_MATCH(DMI_BOARD_NAME, "i915GMm-HFS"),
},
},
{
.callback = thermal_tzp,
.ident = "AOpen i915GMm-HFS",
.matches = {
DMI_MATCH(DMI_BOARD_VENDOR, "AOpen"),
DMI_MATCH(DMI_BOARD_NAME, "i915GMm-HFS"),
},
},
{
.callback = thermal_nocrt,
.ident = "Gigabyte GA-7ZX",
.matches = {
DMI_MATCH(DMI_BOARD_VENDOR, "Gigabyte Technology Co., Ltd."),
DMI_MATCH(DMI_BOARD_NAME, "7ZX"),
},
},
{}
};
static int __init acpi_thermal_init(void)
{
int result = 0;
dmi_check_system(thermal_dmi_table);
if (off) {
printk(KERN_NOTICE "ACPI: thermal control disabled\n");
return -ENODEV;
}
result = acpi_bus_register_driver(&acpi_thermal_driver);
if (result < 0)
return -ENODEV;
return 0;
}
static void __exit acpi_thermal_exit(void)
{
acpi_bus_unregister_driver(&acpi_thermal_driver);
return;
}
module_init(acpi_thermal_init);
module_exit(acpi_thermal_exit);