/*
* Copyright (C) 2017 The Android Open Source Project
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
/**
* @file
* The daemon that hosts CHRE on the SLPI via FastRPC.
*
* Several threads are required for this functionality:
* - Main thread: blocked waiting on SIGINT/SIGTERM, and requests graceful
* shutdown of CHRE when caught
* - Monitor thread: persistently blocked in a FastRPC call to the SLPI that
* only returns when CHRE exits or the SLPI crashes
* - TODO: see whether we can merge this with the RX thread
* - Reverse monitor thread: after initializing the SLPI-side monitor for this
* process, blocks on a condition variable. If this thread exits, CHRE on
* the SLPI side will be notified and shut down (this is only possible if
* this thread is not blocked in a FastRPC call).
* - TODO: confirm this and see whether we can merge this responsibility
* into the TX thread
* - Message to host (RX) thread: blocks in FastRPC call, waiting on incoming
* message from CHRE
* - Message to CHRE (TX) thread: blocks waiting on outbound queue, delivers
* messages to CHRE over FastRPC
*
* TODO: This file originated from an implementation for another device, and was
* written in C, but then it was converted to C++ when adding socket support. It
* should be fully converted to C++.
*/
// Disable verbose logging
// TODO: use property_get_bool to make verbose logging runtime configurable
// #define LOG_NDEBUG 0
#include <ctype.h>
#include <inttypes.h>
#include <pthread.h>
#include <stdbool.h>
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <unistd.h>
#include "chre/platform/slpi/fastrpc.h"
#include "chre_host/log.h"
#include "chre_host/host_protocol_host.h"
#include "chre_host/socket_server.h"
#include "generated/chre_slpi.h"
#include <utils/SystemClock.h>
//! The format string to use for logs from the CHRE implementation.
#define HUB_LOG_FORMAT_STR "Hub (t=%.6f): %s"
#ifdef CHRE_DAEMON_LPMA_ENABLED
#include <android/hardware/soundtrigger/2.0/ISoundTriggerHw.h>
using android::sp;
using android::hardware::Return;
using android::hardware::soundtrigger::V2_0::ISoundTriggerHw;
using android::hardware::soundtrigger::V2_0::SoundModelHandle;
using android::hardware::soundtrigger::V2_0::SoundModelType;
#endif // CHRE_DAEMON_LPMA_ENABLED
using android::chre::HostProtocolHost;
using android::elapsedRealtimeNano;
// Aliased for consistency with the way these symbols are referenced in
// CHRE-side code
namespace fbs = ::chre::fbs;
typedef void *(thread_entry_point_f)(void *);
struct reverse_monitor_thread_data {
pthread_t thread;
pthread_mutex_t mutex;
pthread_cond_t cond;
};
static void *chre_message_to_host_thread(void *arg);
static void *chre_monitor_thread(void *arg);
static void *chre_reverse_monitor_thread(void *arg);
static bool init_reverse_monitor(struct reverse_monitor_thread_data *data);
static bool start_thread(pthread_t *thread_handle,
thread_entry_point_f *thread_entry,
void *arg);
#ifdef CHRE_DAEMON_LPMA_ENABLED
//! The name of the wakelock to use for the CHRE daemon.
static const char kWakeLockName[] = "chre_daemon";
//! The file descriptor to wake lock.
static int gWakeLockFd = -1;
//! The file descriptor to wake unlock.
static int gWakeUnlockFd = -1;
struct LpmaEnableThreadData {
pthread_t thread;
pthread_mutex_t mutex;
pthread_cond_t cond;
bool currentLpmaEnabled;
bool targetLpmaEnabled;
};
static LpmaEnableThreadData lpmaEnableThread;
#endif // CHRE_DAEMON_LPMA_ENABLED
//! Set to true when we request a graceful shutdown of CHRE
static volatile bool chre_shutdown_requested = false;
#if !defined(LOG_NDEBUG) || LOG_NDEBUG != 0
static void log_buffer(const uint8_t * /*buffer*/, size_t /*size*/) {}
#else
static void log_buffer(const uint8_t *buffer, size_t size) {
char line[32];
int offset = 0;
char line_chars[32];
int offset_chars = 0;
size_t orig_size = size;
if (size > 128) {
size = 128;
LOGV("Dumping first 128 bytes of buffer of size %zu", orig_size);
} else {
LOGV("Dumping buffer of size %zu bytes", size);
}
for (size_t i = 1; i <= size; ++i) {
offset += snprintf(&line[offset], sizeof(line) - offset, "%02x ",
buffer[i - 1]);
offset_chars += snprintf(
&line_chars[offset_chars], sizeof(line_chars) - offset_chars,
"%c", (isprint(buffer[i - 1])) ? buffer[i - 1] : '.');
if ((i % 8) == 0) {
LOGV(" %s\t%s", line, line_chars);
offset = 0;
offset_chars = 0;
} else if ((i % 4) == 0) {
offset += snprintf(&line[offset], sizeof(line) - offset, " ");
}
}
if (offset > 0) {
char tabs[8];
char *pos = tabs;
while (offset < 28) {
*pos++ = '\t';
offset += 8;
}
*pos = '\0';
LOGV(" %s%s%s", line, tabs, line_chars);
}
}
#endif
static void parseAndEmitLogMessages(unsigned char *message) {
const fbs::MessageContainer *container = fbs::GetMessageContainer(message);
const auto *logMessage = static_cast<const fbs::LogMessage *>(
container->message());
constexpr size_t kLogMessageHeaderSize = 2 + sizeof(uint64_t);
const flatbuffers::Vector<int8_t>& logData = *logMessage->buffer();
for (size_t i = 0; i <= (logData.size() - kLogMessageHeaderSize);) {
// Parse out the log level.
const char *log = reinterpret_cast<const char *>(&logData.data()[i]);
char logLevel = *log;
log++;
// Parse out the timestampNanos.
uint64_t timestampNanos;
memcpy(×tampNanos, log, sizeof(uint64_t));
timestampNanos = le64toh(timestampNanos);
log += sizeof(uint64_t);
float timestampSeconds = timestampNanos / 1e9;
// Log the message.
switch (logLevel) {
case 1:
LOGE(HUB_LOG_FORMAT_STR, timestampSeconds, log);
break;
case 2:
LOGW(HUB_LOG_FORMAT_STR, timestampSeconds, log);
break;
case 3:
LOGI(HUB_LOG_FORMAT_STR, timestampSeconds, log);
break;
case 4:
LOGD(HUB_LOG_FORMAT_STR, timestampSeconds, log);
break;
default:
LOGE("Invalid CHRE hub log level, omitting log");
}
// Advance the log pointer.
size_t strLen = strlen(log);
i += kLogMessageHeaderSize + strLen;
}
}
static int64_t getTimeOffset(bool *success) {
int64_t timeOffset = 0;
#if defined(__aarch64__)
// Reads the system time counter (CNTVCT) and its frequency (CNTFRQ)
// CNTVCT is used in the sensors HAL for time synchronization.
// More information can be found in the ARM reference manual
// (http://infocenter.arm.com/help/index.jsp?topic=
// /com.arm.doc.100048_0002_05_en/jfa1406793266982.html)
// Use uint64_t to store since the MRS instruction uses 64 bit (X) registers
// (http://infocenter.arm.com/help/topic/
// com.arm.doc.den0024a/ch06s05s02.html)
uint64_t qTimerCount = 0, qTimerFreq = 0;
uint64_t hostTimeNano = elapsedRealtimeNano();
asm volatile("mrs %0, cntvct_el0" : "=r"(qTimerCount));
asm volatile("mrs %0, cntfrq_el0" : "=r"(qTimerFreq));
constexpr uint64_t kOneSecondInNanoseconds = 1000000000;
if (qTimerFreq != 0) {
// Get the seconds part first, then convert the remainder to prevent
// overflow
uint64_t qTimerNanos = (qTimerCount / qTimerFreq);
if (qTimerNanos > UINT64_MAX / kOneSecondInNanoseconds) {
LOGE("CNTVCT_EL0 conversion to nanoseconds overflowed during time sync."
" Aborting time sync.");
*success = false;
} else {
qTimerNanos *= kOneSecondInNanoseconds;
// Round the remainder portion to the nearest nanosecond
uint64_t remainder = (qTimerCount % qTimerFreq);
qTimerNanos +=
(remainder * kOneSecondInNanoseconds + qTimerFreq / 2) / qTimerFreq;
timeOffset = hostTimeNano - qTimerNanos;
*success = true;
}
} else {
LOGE("CNTFRQ_EL0 had 0 value. Aborting time sync.");
*success = false;
}
#else
#error "Unsupported CPU architecture type"
#endif
return timeOffset;
}
static void sendTimeSyncMessage() {
bool timeSyncSuccess = true;
int64_t timeOffset = getTimeOffset(&timeSyncSuccess);
if (timeSyncSuccess) {
flatbuffers::FlatBufferBuilder builder(64);
HostProtocolHost::encodeTimeSyncMessage(builder, timeOffset);
int success = chre_slpi_deliver_message_from_host(
static_cast<const unsigned char *>(builder.GetBufferPointer()),
static_cast<int>(builder.GetSize()));
if (success != 0) {
LOGE("Failed to deliver timestamp message from host to CHRE: %d", success);
}
}
}
#ifdef CHRE_DAEMON_LPMA_ENABLED
/**
* Initializes the wakelock file descriptors used to acquire/release wakelocks
* for CHRE.
*/
static void initWakeLockFds() {
const char kWakeLockPath[] = "/sys/power/wake_lock";
const char kWakeUnlockPath[] = "/sys/power/wake_unlock";
bool success = false;
if ((gWakeLockFd = open(kWakeLockPath, O_RDWR | O_CLOEXEC)) < 0) {
LOGE("Failed to open wake lock file with %s", strerror(errno));
} else if ((gWakeUnlockFd = open(kWakeUnlockPath, O_RDWR | O_CLOEXEC)) < 0) {
close(gWakeLockFd);
LOGE("Failed to open wake unlock file with %s", strerror(errno));
} else {
success = true;
}
if (!success) {
gWakeLockFd = -1;
gWakeUnlockFd = -1;
}
}
static void acquireWakeLock() {
if (gWakeLockFd < 0) {
LOGW("Failing to acquire wakelock due to invalid file descriptor");
} else {
const size_t len = strlen(kWakeLockName);
ssize_t result = write(gWakeLockFd, kWakeLockName, len);
if (result < 0) {
LOGE("Failed to acquire wakelock with error %s", strerror(errno));
} else if (result != static_cast<ssize_t>(len)) {
LOGE("Wrote incomplete id to wakelock file descriptor");
}
}
}
static void releaseWakeLock() {
if (gWakeUnlockFd < 0) {
LOGW("Failed to release wakelock due to invalid file descriptor");
} else {
const size_t len = strlen(kWakeLockName);
ssize_t result = write(gWakeUnlockFd, kWakeLockName, len);
if (result < 0) {
LOGE("Failed to release wakelock with error %s", strerror(errno));
} else if (result != static_cast<ssize_t>(len)) {
LOGE("Wrote incomplete id to wakeunlock file descriptor");
}
}
}
/**
* Sets the target state for LPMA to be enabled. This triggers another thread to
* perform the async operation of enabling or disabling the LPMA use case.
*
* @param enabled Whether LPMA is to be enabled or disabled.
*/
static void setLpmaState(bool enabled) {
pthread_mutex_lock(&lpmaEnableThread.mutex);
lpmaEnableThread.targetLpmaEnabled = enabled;
pthread_mutex_unlock(&lpmaEnableThread.mutex);
pthread_cond_signal(&lpmaEnableThread.cond);
}
/**
* Loads the LPMA use case via the SoundTrigger HAL HIDL service.
*
* @param lpmaHandle The handle that was generated as a result of enabling
* the LPMA use case successfully.
* @return true if LPMA was enabled successfully, false otherwise.
*/
static bool loadLpma(SoundModelHandle *lpmaHandle) {
LOGD("Loading LPMA");
ISoundTriggerHw::SoundModel soundModel;
soundModel.type = SoundModelType::GENERIC;
soundModel.vendorUuid.timeLow = 0x57CADDB1;
soundModel.vendorUuid.timeMid = 0xACDB;
soundModel.vendorUuid.versionAndTimeHigh = 0x4DCE;
soundModel.vendorUuid.variantAndClockSeqHigh = 0x8CB0;
const uint8_t uuidNode[6] = { 0x2E, 0x95, 0xA2, 0x31, 0x3A, 0xEE };
memcpy(&soundModel.vendorUuid.node[0], uuidNode, sizeof(uuidNode));
soundModel.data.resize(1); // Insert a dummy byte to bypass HAL NULL checks.
bool loaded = false;
sp<ISoundTriggerHw> stHal = ISoundTriggerHw::getService();
if (stHal == nullptr) {
LOGE("Failed to get ST HAL service for LPMA load");
} else {
int32_t loadResult;
Return<void> hidlResult = stHal->loadSoundModel(soundModel, NULL, 0,
[&](int32_t retval, SoundModelHandle handle) {
loadResult = retval;
*lpmaHandle = handle;
});
if (hidlResult.isOk()) {
if (loadResult == 0) {
LOGI("Loaded LPMA");
loaded = true;
} else {
LOGE("Failed to load LPMA with %" PRId32, loadResult);
}
} else {
LOGE("Failed to load LPMA due to hidl error %s",
hidlResult.description().c_str());
}
}
return loaded;
}
/**
* Unloads the LPMA use case via the SoundTrigger HAL HIDL service.
*
* @param lpmaHandle A handle that was previously produced by the setLpmaEnabled
* function. This is the handle that is unloaded from the ST HAL to
* disable LPMA.
* @return true if LPMA was disabled successfully, false otherwise.
*/
static bool unloadLpma(SoundModelHandle lpmaHandle) {
LOGD("Unloading LPMA");
bool unloaded = false;
sp<ISoundTriggerHw> stHal = ISoundTriggerHw::getService();
if (stHal == nullptr) {
LOGE("Failed to get ST HAL service for LPMA unload");
} else {
Return<int32_t> hidlResult = stHal->unloadSoundModel(lpmaHandle);
if (hidlResult.isOk()) {
if (hidlResult == 0) {
LOGI("Unloaded LPMA");
unloaded = true;
} else {
LOGE("Failed to unload LPMA with %" PRId32, int32_t(hidlResult));
}
} else {
LOGE("Failed to unload LPMA due to hidl error %s",
hidlResult.description().c_str());
}
}
return unloaded;
}
static void *chreLpmaEnableThread(void *arg) {
auto *state = static_cast<LpmaEnableThreadData *>(arg);
const useconds_t kInitialRetryDelayUs = 500000;
const int kRetryGrowthFactor = 2;
const int kRetryGrowthLimit = 5; // Terminates at 8s retry interval.
const int kRetryWakeLockLimit = 10; // Retry with a wakelock 10 times.
int retryCount = 0;
useconds_t retryDelay = 0;
SoundModelHandle lpmaHandle;
while (true) {
pthread_mutex_lock(&state->mutex);
if (state->currentLpmaEnabled == state->targetLpmaEnabled) {
retryCount = 0;
retryDelay = 0;
releaseWakeLock(); // Allow the system to suspend while waiting.
pthread_cond_wait(&state->cond, &state->mutex);
acquireWakeLock(); // Ensure the system stays up while retrying.
} else if ((state->targetLpmaEnabled && loadLpma(&lpmaHandle))
|| (!state->targetLpmaEnabled && unloadLpma(lpmaHandle))) {
state->currentLpmaEnabled = state->targetLpmaEnabled;
} else {
// Unlock while delaying to avoid blocking the client thread. No shared
// state is modified here.
pthread_mutex_unlock(&state->mutex);
if (retryDelay == 0) {
retryDelay = kInitialRetryDelayUs;
} else if (retryCount < kRetryGrowthLimit) {
retryDelay *= kRetryGrowthFactor;
}
LOGD("Delaying retry %d for %uus", retryCount, retryDelay);
usleep(retryDelay);
retryCount++;
if (retryCount > kRetryWakeLockLimit) {
releaseWakeLock();
}
pthread_mutex_lock(&state->mutex);
}
pthread_mutex_unlock(&state->mutex);
}
LOGV("LPMA enable thread exited");
return NULL;
}
/**
* Initializes the data shared with the LPMA enable thread and starts the
* thread.
*
* @param data Pointer to structure containing the (uninitialized) condition
* variable and associated data passed to the LPMA enable thread.
* @return true on success, false otherwise.
*/
static bool initLpmaEnableThread(LpmaEnableThreadData *data) {
bool success = false;
int ret;
if ((ret = pthread_mutex_init(&data->mutex, NULL)) != 0) {
LOG_ERROR("Failed to initialize lpma enable mutex", ret);
} else if ((ret = pthread_cond_init(&data->cond, NULL)) != 0) {
LOG_ERROR("Failed to initialize lpma enable condition variable", ret);
} else if (!start_thread(&data->thread, chreLpmaEnableThread, data)) {
LOGE("Couldn't start lpma enable thread");
} else {
data->currentLpmaEnabled = false;
data->targetLpmaEnabled = false;
success = true;
}
return success;
}
#endif // CHRE_DAEMON_LPMA_ENABLED
/**
* Entry point for the thread that receives messages sent by CHRE.
*
* @return always returns NULL
*/
static void *chre_message_to_host_thread(void *arg) {
unsigned char messageBuffer[4096];
unsigned int messageLen;
int result = 0;
auto *server = static_cast<::android::chre::SocketServer *>(arg);
while (true) {
messageLen = 0;
LOGV("Calling into chre_slpi_get_message_to_host");
result = chre_slpi_get_message_to_host(
messageBuffer, sizeof(messageBuffer), &messageLen);
LOGV("Got message from CHRE with size %u (result %d)", messageLen, result);
if (result == CHRE_FASTRPC_ERROR_SHUTTING_DOWN) {
LOGD("CHRE shutting down, exiting CHRE->Host message thread");
break;
} else if (result == CHRE_FASTRPC_SUCCESS && messageLen > 0) {
log_buffer(messageBuffer, messageLen);
uint16_t hostClientId;
fbs::ChreMessage messageType;
if (!HostProtocolHost::extractHostClientIdAndType(
messageBuffer, messageLen, &hostClientId, &messageType)) {
LOGW("Failed to extract host client ID from message - sending "
"broadcast");
hostClientId = chre::kHostClientIdUnspecified;
}
if (messageType == fbs::ChreMessage::LogMessage) {
parseAndEmitLogMessages(messageBuffer);
} else if (messageType == fbs::ChreMessage::TimeSyncRequest) {
sendTimeSyncMessage();
#ifdef CHRE_DAEMON_LPMA_ENABLED
} else if (messageType == fbs::ChreMessage::LowPowerMicAccessRequest) {
setLpmaState(true);
} else if (messageType == fbs::ChreMessage::LowPowerMicAccessRelease) {
setLpmaState(false);
#endif // CHRE_DAEMON_LPMA_ENABLED
} else if (hostClientId == chre::kHostClientIdUnspecified) {
server->sendToAllClients(messageBuffer,
static_cast<size_t>(messageLen));
} else {
server->sendToClientById(messageBuffer,
static_cast<size_t>(messageLen), hostClientId);
}
} else if (!chre_shutdown_requested) {
LOGE("Received an unknown result and no shutdown was requested. Quitting");
exit(-1);
} else {
// Received an unknown result but a shutdown was requested. Break from the
// loop to allow the daemon to cleanup.
break;
}
}
LOGV("Message to host thread exited");
return NULL;
}
/**
* Entry point for the thread that blocks in a FastRPC call to monitor for
* abnormal exit of CHRE or reboot of the SLPI.
*
* @return always returns NULL
*/
static void *chre_monitor_thread(void *arg) {
(void) arg;
int ret = chre_slpi_wait_on_thread_exit();
if (!chre_shutdown_requested) {
LOGE("Detected unexpected CHRE thread exit (%d)\n", ret);
exit(EXIT_FAILURE);
}
LOGV("Monitor thread exited");
return NULL;
}
/**
* Entry point for the "reverse" monitor thread, which invokes a FastRPC method
* to register a thread destructor, and blocks waiting on a condition variable.
* This allows for the code running in the SLPI to detect abnormal shutdown of
* the host-side binary and perform graceful cleanup.
*
* @return always returns NULL
*/
static void *chre_reverse_monitor_thread(void *arg) {
struct reverse_monitor_thread_data *thread_data =
(struct reverse_monitor_thread_data *) arg;
int ret = chre_slpi_initialize_reverse_monitor();
if (ret != CHRE_FASTRPC_SUCCESS) {
LOGE("Failed to initialize reverse monitor on SLPI: %d", ret);
} else {
// Block here on the condition variable until the main thread notifies
// us to exit
pthread_mutex_lock(&thread_data->mutex);
pthread_cond_wait(&thread_data->cond, &thread_data->mutex);
pthread_mutex_unlock(&thread_data->mutex);
}
LOGV("Reverse monitor thread exited");
return NULL;
}
/**
* Initializes the data shared with the reverse monitor thread, and starts the
* thread.
*
* @param data Pointer to structure containing the (uninitialized) condition
* variable and associated data passed to the reverse monitor thread
*
* @return true on success
*/
static bool init_reverse_monitor(struct reverse_monitor_thread_data *data) {
bool success = false;
int ret;
if ((ret = pthread_mutex_init(&data->mutex, NULL)) != 0) {
LOG_ERROR("Failed to initialize mutex", ret);
} else if ((ret = pthread_cond_init(&data->cond, NULL)) != 0) {
LOG_ERROR("Failed to initialize condition variable", ret);
} else if (!start_thread(&data->thread, chre_reverse_monitor_thread, data)) {
LOGE("Couldn't start reverse monitor thread");
} else {
success = true;
}
return success;
}
/**
* Start a thread with default attributes, or log an error on failure
*
* @return bool true if the thread was successfully started
*/
static bool start_thread(pthread_t *thread_handle,
thread_entry_point_f *thread_entry,
void *arg) {
int ret = pthread_create(thread_handle, NULL, thread_entry, arg);
if (ret != 0) {
LOG_ERROR("pthread_create failed", ret);
}
return (ret == 0);
}
namespace {
void onMessageReceivedFromClient(uint16_t clientId, void *data, size_t length) {
constexpr size_t kMaxPayloadSize = 1024 * 1024; // 1 MiB
// This limitation is due to FastRPC, but there's no case where we should come
// close to this limit...
static_assert(kMaxPayloadSize <= INT32_MAX,
"SLPI uses 32-bit signed integers to represent message size");
if (length > kMaxPayloadSize) {
LOGE("Message too large to pass to SLPI (got %zu, max %zu bytes)", length,
kMaxPayloadSize);
} else if (!HostProtocolHost::mutateHostClientId(data, length, clientId)) {
LOGE("Couldn't set host client ID in message container!");
} else {
LOGV("Delivering message from host (size %zu)", length);
log_buffer(static_cast<const uint8_t *>(data), length);
int ret = chre_slpi_deliver_message_from_host(
static_cast<const unsigned char *>(data), static_cast<int>(length));
if (ret != 0) {
LOGE("Failed to deliver message from host to CHRE: %d", ret);
}
}
}
} // anonymous namespace
int main() {
int ret = -1;
pthread_t monitor_thread;
pthread_t msg_to_host_thread;
struct reverse_monitor_thread_data reverse_monitor;
::android::chre::SocketServer server;
#ifdef CHRE_DAEMON_LPMA_ENABLED
initWakeLockFds();
#endif // CHRE_DAEMON_LPMA_ENABLED
if (!init_reverse_monitor(&reverse_monitor)) {
LOGE("Couldn't initialize reverse monitor");
#ifdef CHRE_DAEMON_LPMA_ENABLED
} else if (!initLpmaEnableThread(&lpmaEnableThread)) {
LOGE("Couldn't initialize LPMA enable thread");
#endif // CHRE_DAEMON_LPMA_ENABLED
} else {
// Send time offset message before nanoapps start
sendTimeSyncMessage();
if ((ret = chre_slpi_start_thread()) != CHRE_FASTRPC_SUCCESS) {
LOGE("Failed to start CHRE on SLPI: %d", ret);
} else {
if (!start_thread(&monitor_thread, chre_monitor_thread, NULL)) {
LOGE("Couldn't start monitor thread");
} else if (!start_thread(&msg_to_host_thread, chre_message_to_host_thread,
&server)) {
LOGE("Couldn't start CHRE->Host message thread");
} else {
LOGI("CHRE on SLPI started");
// TODO: take 2nd argument as command-line parameter
server.run("chre", true, onMessageReceivedFromClient);
}
chre_shutdown_requested = true;
ret = chre_slpi_stop_thread();
if (ret != CHRE_FASTRPC_SUCCESS) {
LOGE("Failed to stop CHRE on SLPI: %d", ret);
} else {
// TODO: don't call pthread_join if the thread failed to start
LOGV("Joining monitor thread");
ret = pthread_join(monitor_thread, NULL);
if (ret != 0) {
LOG_ERROR("Join on monitor thread failed", ret);
}
LOGV("Joining reverse monitor thread");
pthread_cond_signal(&reverse_monitor.cond);
ret = pthread_join(reverse_monitor.thread, NULL);
if (ret != 0) {
LOG_ERROR("Join on reverse monitor thread failed", ret);
}
LOGV("Joining message to host thread");
ret = pthread_join(msg_to_host_thread, NULL);
if (ret != 0) {
LOG_ERROR("Join on monitor thread failed", ret);
}
LOGI("Shutdown complete");
}
}
}
return ret;
}