/******************************************************************************
*
* Copyright 2009-2012 Broadcom Corporation
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at:
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
******************************************************************************/
#ifndef BTIF_STORAGE_H
#define BTIF_STORAGE_H
#include <bluetooth/uuid.h>
#include <hardware/bluetooth.h>
#include "bt_target.h"
#include "bt_types.h"
/*******************************************************************************
* Constants & Macros
******************************************************************************/
#define BTIF_STORAGE_FILL_PROPERTY(p_prop, t, l, p_v) \
do { \
(p_prop)->type = (t); \
(p_prop)->len = (l); \
(p_prop)->val = (p_v); \
} while (0)
/*******************************************************************************
* Functions
******************************************************************************/
/*******************************************************************************
*
* Function btif_storage_get_adapter_property
*
* Description BTIF storage API - Fetches the adapter property->type
* from NVRAM and fills property->val.
* Caller should provide memory for property->val and
* set the property->val
*
* Returns BT_STATUS_SUCCESS if the fetch was successful,
* BT_STATUS_FAIL otherwise
*
******************************************************************************/
bt_status_t btif_storage_get_adapter_property(bt_property_t* property);
/*******************************************************************************
*
* Function btif_storage_set_adapter_property
*
* Description BTIF storage API - Stores the adapter property
* to NVRAM
*
* Returns BT_STATUS_SUCCESS if the store was successful,
* BT_STATUS_FAIL otherwise
*
******************************************************************************/
bt_status_t btif_storage_set_adapter_property(bt_property_t* property);
/*******************************************************************************
*
* Function btif_storage_get_remote_device_property
*
* Description BTIF storage API - Fetches the remote device property->type
* from NVRAM and fills property->val.
* Caller should provide memory for property->val and
* set the property->val
*
* Returns BT_STATUS_SUCCESS if the fetch was successful,
* BT_STATUS_FAIL otherwise
*
******************************************************************************/
bt_status_t btif_storage_get_remote_device_property(
const RawAddress* remote_bd_addr, bt_property_t* property);
/*******************************************************************************
*
* Function btif_storage_set_remote_device_property
*
* Description BTIF storage API - Stores the remote device property
* to NVRAM
*
* Returns BT_STATUS_SUCCESS if the store was successful,
* BT_STATUS_FAIL otherwise
*
******************************************************************************/
bt_status_t btif_storage_set_remote_device_property(
const RawAddress* remote_bd_addr, bt_property_t* property);
/*******************************************************************************
*
* Function btif_storage_add_remote_device
*
* Description BTIF storage API - Adds a newly discovered device to
* track along with the timestamp. Also, stores the various
* properties - RSSI, BDADDR, NAME (if found in EIR)
*
* Returns BT_STATUS_SUCCESS if successful,
* BT_STATUS_FAIL otherwise
*
******************************************************************************/
bt_status_t btif_storage_add_remote_device(const RawAddress* remote_bd_addr,
uint32_t num_properties,
bt_property_t* properties);
/*******************************************************************************
*
* Function btif_storage_add_bonded_device
*
* Description BTIF storage API - Adds the newly bonded device to NVRAM
* along with the link-key, Key type and Pin key length
*
* Returns BT_STATUS_SUCCESS if the store was successful,
* BT_STATUS_FAIL otherwise
*
******************************************************************************/
bt_status_t btif_storage_add_bonded_device(RawAddress* remote_bd_addr,
LINK_KEY link_key, uint8_t key_type,
uint8_t pin_length);
/*******************************************************************************
*
* Function btif_storage_remove_bonded_device
*
* Description BTIF storage API - Deletes the bonded device from NVRAM
*
* Returns BT_STATUS_SUCCESS if the deletion was successful,
* BT_STATUS_FAIL otherwise
*
******************************************************************************/
bt_status_t btif_storage_remove_bonded_device(const RawAddress* remote_bd_addr);
/*******************************************************************************
*
* Function btif_storage_remove_bonded_device
*
* Description BTIF storage API - Deletes the bonded device from NVRAM
*
* Returns BT_STATUS_SUCCESS if the deletion was successful,
* BT_STATUS_FAIL otherwise
*
******************************************************************************/
bt_status_t btif_storage_load_bonded_devices(void);
/*******************************************************************************
*
* Function btif_storage_add_hid_device_info
*
* Description BTIF storage API - Adds the hid information of bonded hid
* devices-to NVRAM
*
* Returns BT_STATUS_SUCCESS if the store was successful,
* BT_STATUS_FAIL otherwise
*
******************************************************************************/
bt_status_t btif_storage_add_hid_device_info(
RawAddress* remote_bd_addr, uint16_t attr_mask, uint8_t sub_class,
uint8_t app_id, uint16_t vendor_id, uint16_t product_id, uint16_t version,
uint8_t ctry_code, uint16_t ssr_max_latency, uint16_t ssr_min_tout,
uint16_t dl_len, uint8_t* dsc_list);
/*******************************************************************************
*
* Function btif_storage_load_bonded_hid_info
*
* Description BTIF storage API - Loads hid info for all the bonded devices
* from NVRAM and adds those devices to the BTA_HH.
*
* Returns BT_STATUS_SUCCESS if successful, BT_STATUS_FAIL otherwise
*
******************************************************************************/
bt_status_t btif_storage_load_bonded_hid_info(void);
/*******************************************************************************
*
* Function btif_storage_remove_hid_info
*
* Description BTIF storage API - Deletes the bonded hid device info from
* NVRAM
*
* Returns BT_STATUS_SUCCESS if the deletion was successful,
* BT_STATUS_FAIL otherwise
*
******************************************************************************/
bt_status_t btif_storage_remove_hid_info(RawAddress* remote_bd_addr);
/** Loads information about bonded hearing aid devices */
void btif_storage_load_bonded_hearing_aids();
/** Deletes the bonded hearing aid device info from NVRAM */
void btif_storage_remove_hearing_aid(const RawAddress& address);
/** Remove the hearing aid device from white list */
void btif_storage_remove_hearing_aid_white_list(const RawAddress& address);
/*******************************************************************************
*
* Function btif_storage_is_retricted_device
*
* Description BTIF storage API - checks if this device is a restricted
* device
*
* Returns true if the device is labled as restricted
* false otherwise
*
******************************************************************************/
bool btif_storage_is_restricted_device(const RawAddress* remote_bd_addr);
bt_status_t btif_storage_add_ble_bonding_key(RawAddress* remote_bd_addr,
const uint8_t* key,
uint8_t key_type,
uint8_t key_length);
bt_status_t btif_storage_get_ble_bonding_key(RawAddress* remote_bd_addr,
uint8_t key_type,
uint8_t* key_value,
int key_length);
bt_status_t btif_storage_add_ble_local_key(char* key, uint8_t key_type,
uint8_t key_length);
bt_status_t btif_storage_remove_ble_bonding_keys(
const RawAddress* remote_bd_addr);
bt_status_t btif_storage_remove_ble_local_keys(void);
bt_status_t btif_storage_get_ble_local_key(uint8_t key_type, char* key_value,
int key_len);
bt_status_t btif_storage_get_remote_addr_type(const RawAddress* remote_bd_addr,
int* addr_type);
bt_status_t btif_storage_set_remote_addr_type(const RawAddress* remote_bd_addr,
uint8_t addr_type);
/*******************************************************************************
* Function btif_storage_load_hidd
*
* Description Loads hidd bonded device and "plugs" it into hidd
*
* Returns BT_STATUS_SUCCESS if successful, BT_STATUS_FAIL otherwise
*
******************************************************************************/
bt_status_t btif_storage_load_hidd(void);
/*******************************************************************************
*
* Function btif_storage_set_hidd
*
* Description Stores hidd bonded device info in nvram.
*
* Returns BT_STATUS_SUCCESS
*
******************************************************************************/
bt_status_t btif_storage_set_hidd(RawAddress* remote_bd_addr);
/*******************************************************************************
*
* Function btif_storage_remove_hidd
*
* Description Removes hidd bonded device info from nvram
*
* Returns BT_STATUS_SUCCESS
*
******************************************************************************/
bt_status_t btif_storage_remove_hidd(RawAddress* remote_bd_addr);
// Gets the device name for a given Bluetooth address |bd_addr|.
// The device name (if found) is stored in |name|.
// Returns true if the device name is found, othervise false.
// Note: |name| should point to a buffer that can store string of length
// |BTM_MAX_REM_BD_NAME_LEN|.
bool btif_storage_get_stored_remote_name(const RawAddress& bd_addr, char* name);
/******************************************************************************
* Exported for unit tests
*****************************************************************************/
size_t btif_split_uuids_string(const char* str, bluetooth::Uuid* p_uuid,
size_t max_uuids);
#endif /* BTIF_STORAGE_H */