C++程序  |  122行  |  6.75 KB

// These counters are used to get a delta between leak counts at startup
// (eg. due to libc) and later on.  Necessary to get reliable leak tests
// across different platforms.
#define DECLARE_LEAK_COUNTERS \
   long L0_bytes = 0, L_bytes = 0, L0_blocks = 0, L_blocks = 0; \
   long D0_bytes = 0, D_bytes = 0, D0_blocks = 0, D_blocks = 0; \
   long R0_bytes = 0, R_bytes = 0, R0_blocks = 0, R_blocks = 0; \
   long S0_bytes = 0, S_bytes = 0, S0_blocks = 0, S_blocks = 0

// Set a baseline, in case allocations have already happened.
#define GET_INITIAL_LEAK_COUNTS \
   do { \
      VALGRIND_DO_QUICK_LEAK_CHECK; \
      VALGRIND_COUNT_LEAKS(      L0_bytes,  D0_bytes,  R0_bytes,  S0_bytes );\
      VALGRIND_COUNT_LEAK_BLOCKS(L0_blocks, D0_blocks, R0_blocks, S0_blocks); \
   } while (0)

// Set a baseline, in case allocations have already happened.
#define GET_FINAL_LEAK_COUNTS \
   do { \
      VALGRIND_DO_QUICK_LEAK_CHECK; \
      VALGRIND_COUNT_LEAKS(      L_bytes,  D_bytes,  R_bytes,  S_bytes ); \
      VALGRIND_COUNT_LEAK_BLOCKS(L_blocks, D_blocks, R_blocks, S_blocks); \
      L_bytes -= L0_bytes;  L_blocks -= L0_blocks; \
      D_bytes -= D0_bytes;  D_blocks -= D0_blocks; \
      R_bytes -= R0_bytes;  R_blocks -= R0_blocks; \
      S_bytes -= S0_bytes;  S_blocks -= S0_blocks; \
   } while (0)

// Print leak counts.  When used in conjunction with -q the normal counts
// aren't shown, which is what we want.
#define PRINT_LEAK_COUNTS(where) \
   do { \
      fprintf(where,"leaked:     %3ld bytes in %2ld blocks\n", \
                     L_bytes,L_blocks); \
      fprintf(where,"dubious:    %3ld bytes in %2ld blocks\n", \
                     D_bytes,D_blocks); \
      fprintf(where,"reachable:  %3ld bytes in %2ld blocks\n", \
                     R_bytes,R_blocks); \
      fprintf(where,"suppressed: %3ld bytes in %2ld blocks\n", \
                     S_bytes,S_blocks); \
   } while (0)

/* Upon a call to a function, some architectures store pointers into
 * into registers.  Valgrind may consider these registers when determining
 * whether an address is reachable, so we need to zero-out these registers
 * as needed.
 */
#if defined __powerpc__
#define CLEAR_CALLER_SAVED_REGS \
  do { \
   __asm__ __volatile__( "li 3, 0" : : :/*trash*/"r3" ); \
   __asm__ __volatile__( "li 4, 0" : : :/*trash*/"r4" ); \
   __asm__ __volatile__( "li 5, 0" : : :/*trash*/"r5" ); \
   __asm__ __volatile__( "li 6, 0" : : :/*trash*/"r6" ); \
   __asm__ __volatile__( "li 7, 0" : : :/*trash*/"r7" ); \
   __asm__ __volatile__( "li 8, 0" : : :/*trash*/"r8" ); \
   __asm__ __volatile__( "li 9, 0" : : :/*trash*/"r9" ); \
   __asm__ __volatile__( "li 10, 0" : : :/*trash*/"r10" ); \
   __asm__ __volatile__( "li 11, 0" : : :/*trash*/"r11" ); \
   __asm__ __volatile__( "li 12, 0" : : :/*trash*/"r12" ); \
  } while (0)
#elif (__mips == 32)
#define CLEAR_CALLER_SAVED_REGS                                              \
   do {                                                                      \
      __asm__ __volatile__ (".set push    \n\t"                              \
                            ".set noat    \n\t"                              \
                            "move $1,  $0 \n\t"   /* at = 0 */               \
                            "move $2,  $0 \n\t"   /* v0 = 0 */               \
                            "move $3,  $0 \n\t"   /* v1 = 0 */               \
                            "move $4,  $0 \n\t"   /* a0 = 0 */               \
                            "move $5,  $0 \n\t"   /* a1 = 0 */               \
                            "move $6,  $0 \n\t"   /* a2 = 0 */               \
                            "move $7,  $0 \n\t"   /* a3 = 0 */               \
                            "move $8,  $0 \n\t"   /* t0 = 0 */               \
                            "move $9,  $0 \n\t"   /* t1 = 0 */               \
                            "move $10, $0 \n\t"   /* t2 = 0 */               \
                            "move $11, $0 \n\t"   /* t3 = 0 */               \
                            "move $12, $0 \n\t"   /* t4 = 0 */               \
                            "move $13, $0 \n\t"   /* t5 = 0 */               \
                            "move $14, $0 \n\t"   /* t6 = 0 */               \
                            "move $15, $0 \n\t"   /* t7 = 0 */               \
                            "move $24, $0 \n\t"   /* t8 = 0 */               \
                            "move $25, $0 \n\t"   /* t9 = 0 */               \
                            ".set pop     \n\t"                              \
                            : : : "$1", "$2", "$3", "$4", "$5", "$6", "$7",  \
                                  "$8", "$9", "$10", "$11", "$12", "$13",    \
                                  "$14", "$15", "$24", "$25");               \
   } while (0)
#elif (__mips == 64)
#define CLEAR_CALLER_SAVED_REGS                                              \
   do {                                                                      \
      __asm__ __volatile__ (".set push    \n\t"                              \
                            ".set noat    \n\t"                              \
                            "move $1,  $0 \n\t"  /* at = 0 */                \
                            "move $2,  $0 \n\t"  /* v0 = 0 */                \
                            "move $3,  $0 \n\t"  /* v1 = 0 */                \
                            "move $4,  $0 \n\t"  /* a0 = 0 */                \
                            "move $5,  $0 \n\t"  /* a1 = 0 */                \
                            "move $6,  $0 \n\t"  /* a2 = 0 */                \
                            "move $7,  $0 \n\t"  /* a3 = 0 */                \
                            "move $8,  $0 \n\t"  /* a4 = 0 */                \
                            "move $9,  $0 \n\t"  /* a5 = 0 */                \
                            "move $10, $0 \n\t"  /* a6 = 0 */                \
                            "move $11, $0 \n\t"  /* a7 = 0 */                \
                            "move $12, $0 \n\t"  /* t0 = 0 */                \
                            "move $13, $0 \n\t"  /* t1 = 0 */                \
                            "move $14, $0 \n\t"  /* t2 = 0 */                \
                            "move $15, $0 \n\t"  /* t3 = 0 */                \
                            "move $24, $0 \n\t"  /* t8 = 0 */                \
                            "move $25, $0 \n\t"  /* t9 = 0 */                \
                            ".set pop     \n\t"                              \
                            : : : "$1", "$2", "$3", "$4", "$5", "$6", "$7",  \
                                  "$8", "$9", "$10", "$11", "$12", "$13",    \
                                  "$14", "$15", "$24", "$25");               \
   } while (0)
#else
#define CLEAR_CALLER_SAVED_REGS  /*nothing*/
#endif