/*
* 3c515.c -- 3COM 3C515 Fast Etherlink ISA 10/100BASE-TX driver for etherboot
* Copyright (C) 2002 Timothy Legge <tlegge@rogers.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*
* Portions of this code:
* Copyright (C) 1997-2002 Donald Becker 3c515.c: A 3Com ISA EtherLink XL "Corkscrew" ethernet driver for linux.
* Copyright (C) 2001 P.J.H.Fox (fox@roestock.demon.co.uk) ISAPNP Tools
* Copyright (c) 2002 Jaroslav Kysela <perex@suse.cz> ISA Plug & Play support Linux Kernel
* Copyright (C) 2000 Shusuke Nisiyama <shu@athena.qe.eng.hokudai.ac.jp> etherboot-5.0.5 3c595.c
* Coptright (C) 1995 Martin Renters etherboot-5.0.5 3c509.c
* Copyright (C) 1999 LightSys Technology Services, Inc. etherboot-5.0.5 3c90x.c
* Portions Copyright (C) 1999 Steve Smith etherboot-5.0.5 3c90x.c
*
* The probe and reset functions and defines are direct copies from the
* Becker code modified where necessary to make it work for etherboot
*
* The poll and transmit functions either contain code from or were written by referencing
* the above referenced etherboot drivers. This driver would not have been
* possible without this prior work
*
* REVISION HISTORY:
* ================
* v0.10 4-17-2002 TJL Initial implementation.
* v0.11 4-17-2002 TJL Cleanup of the code
* v0.12 4-26-2002 TJL Added ISA Plug and Play for Non-PNP Bioses
* v0.13 6-10-2002 TJL Fixed ISA_PNP MAC Address problem
* v0.14 9-23-2003 TJL Replaced delay with currticks
*
* Indent Options: indent -kr -i8
* *********************************************************/
FILE_LICENCE ( GPL2_OR_LATER );
/* to get some global routines like printf */
#include "etherboot.h"
/* to get the interface to the body of the program */
#include "nic.h"
#include <gpxe/isapnp.h>
#include <gpxe/isa.h> /* for ISA_ROM */
#include <gpxe/ethernet.h>
static void t3c515_wait(unsigned int nticks)
{
unsigned int to = currticks() + nticks;
while (currticks() < to)
/* wait */ ;
}
/* TJL definations */
#define HZ 100
static int if_port;
static struct corkscrew_private *vp;
/* Brought directly from 3c515.c by Becker */
#define CORKSCREW 1
/* Maximum events (Rx packets, etc.) to handle at each interrupt.
static int max_interrupt_work = 20;
*/
/* Enable the automatic media selection code -- usually set. */
#define AUTOMEDIA 1
/* Allow the use of fragment bus master transfers instead of only
programmed-I/O for Vortex cards. Full-bus-master transfers are always
enabled by default on Boomerang cards. If VORTEX_BUS_MASTER is defined,
the feature may be turned on using 'options'. */
#define VORTEX_BUS_MASTER
/* A few values that may be tweaked. */
/* Keep the ring sizes a power of two for efficiency. */
#define TX_RING_SIZE 16
#define RX_RING_SIZE 16
#define PKT_BUF_SZ 1536 /* Size of each temporary Rx buffer. */
/* "Knobs" for adjusting internal parameters. */
/* Put out somewhat more debugging messages. (0 - no msg, 1 minimal msgs). */
#define DRIVER_DEBUG 1
/* Some values here only for performance evaluation and path-coverage
debugging.
static int rx_nocopy, rx_copy, queued_packet;
*/
#define CORKSCREW_ID 10
#define EL3WINDOW(win_num) \
outw(SelectWindow + (win_num), nic->ioaddr + EL3_CMD)
#define EL3_CMD 0x0e
#define EL3_STATUS 0x0e
#define RX_BYTES_MASK (unsigned short) (0x07ff)
enum corkscrew_cmd {
TotalReset = 0 << 11, SelectWindow = 1 << 11, StartCoax = 2 << 11,
RxDisable = 3 << 11, RxEnable = 4 << 11, RxReset = 5 << 11,
UpStall = 6 << 11, UpUnstall = (6 << 11) + 1,
DownStall = (6 << 11) + 2, DownUnstall = (6 << 11) + 3,
RxDiscard = 8 << 11, TxEnable = 9 << 11, TxDisable =
10 << 11, TxReset = 11 << 11,
FakeIntr = 12 << 11, AckIntr = 13 << 11, SetIntrEnb = 14 << 11,
SetStatusEnb = 15 << 11, SetRxFilter = 16 << 11, SetRxThreshold =
17 << 11,
SetTxThreshold = 18 << 11, SetTxStart = 19 << 11,
StartDMAUp = 20 << 11, StartDMADown = (20 << 11) + 1, StatsEnable =
21 << 11,
StatsDisable = 22 << 11, StopCoax = 23 << 11,
};
/* The SetRxFilter command accepts the following classes: */
enum RxFilter {
RxStation = 1, RxMulticast = 2, RxBroadcast = 4, RxProm = 8
};
/* Bits in the general status register. */
enum corkscrew_status {
IntLatch = 0x0001, AdapterFailure = 0x0002, TxComplete = 0x0004,
TxAvailable = 0x0008, RxComplete = 0x0010, RxEarly = 0x0020,
IntReq = 0x0040, StatsFull = 0x0080,
DMADone = 1 << 8, DownComplete = 1 << 9, UpComplete = 1 << 10,
DMAInProgress = 1 << 11, /* DMA controller is still busy. */
CmdInProgress = 1 << 12, /* EL3_CMD is still busy. */
};
/* Register window 1 offsets, the window used in normal operation.
On the Corkscrew this window is always mapped at offsets 0x10-0x1f. */
enum Window1 {
TX_FIFO = 0x10, RX_FIFO = 0x10, RxErrors = 0x14,
RxStatus = 0x18, Timer = 0x1A, TxStatus = 0x1B,
TxFree = 0x1C, /* Remaining free bytes in Tx buffer. */
};
enum Window0 {
Wn0IRQ = 0x08,
#if defined(CORKSCREW)
Wn0EepromCmd = 0x200A, /* Corkscrew EEPROM command register. */
Wn0EepromData = 0x200C, /* Corkscrew EEPROM results register. */
#else
Wn0EepromCmd = 10, /* Window 0: EEPROM command register. */
Wn0EepromData = 12, /* Window 0: EEPROM results register. */
#endif
};
enum Win0_EEPROM_bits {
EEPROM_Read = 0x80, EEPROM_WRITE = 0x40, EEPROM_ERASE = 0xC0,
EEPROM_EWENB = 0x30, /* Enable erasing/writing for 10 msec. */
EEPROM_EWDIS = 0x00, /* Disable EWENB before 10 msec timeout. */
};
enum Window3 { /* Window 3: MAC/config bits. */
Wn3_Config = 0, Wn3_MAC_Ctrl = 6, Wn3_Options = 8,
};
union wn3_config {
int i;
struct w3_config_fields {
unsigned int ram_size:3, ram_width:1, ram_speed:2,
rom_size:2;
int pad8:8;
unsigned int ram_split:2, pad18:2, xcvr:3, pad21:1,
autoselect:1;
int pad24:7;
} u;
};
enum Window4 {
Wn4_NetDiag = 6, Wn4_Media = 10, /* Window 4: Xcvr/media bits. */
};
enum Win4_Media_bits {
Media_SQE = 0x0008, /* Enable SQE error counting for AUI. */
Media_10TP = 0x00C0, /* Enable link beat and jabber for 10baseT. */
Media_Lnk = 0x0080, /* Enable just link beat for 100TX/100FX. */
Media_LnkBeat = 0x0800,
};
enum Window7 { /* Window 7: Bus Master control. */
Wn7_MasterAddr = 0, Wn7_MasterLen = 6, Wn7_MasterStatus = 12,
};
/* Boomerang-style bus master control registers. Note ISA aliases! */
enum MasterCtrl {
PktStatus = 0x400, DownListPtr = 0x404, FragAddr = 0x408, FragLen =
0x40c,
TxFreeThreshold = 0x40f, UpPktStatus = 0x410, UpListPtr = 0x418,
};
/* The Rx and Tx descriptor lists.
Caution Alpha hackers: these types are 32 bits! Note also the 8 byte
alignment contraint on tx_ring[] and rx_ring[]. */
struct boom_rx_desc {
u32 next;
s32 status;
u32 addr;
s32 length;
};
/* Values for the Rx status entry. */
enum rx_desc_status {
RxDComplete = 0x00008000, RxDError = 0x4000,
/* See boomerang_rx() for actual error bits */
};
struct boom_tx_desc {
u32 next;
s32 status;
u32 addr;
s32 length;
};
struct corkscrew_private {
const char *product_name;
struct net_device *next_module;
/* The Rx and Tx rings are here to keep them quad-word-aligned. */
struct boom_rx_desc rx_ring[RX_RING_SIZE];
struct boom_tx_desc tx_ring[TX_RING_SIZE];
/* The addresses of transmit- and receive-in-place skbuffs. */
struct sk_buff *rx_skbuff[RX_RING_SIZE];
struct sk_buff *tx_skbuff[TX_RING_SIZE];
unsigned int cur_rx, cur_tx; /* The next free ring entry */
unsigned int dirty_rx, dirty_tx; /* The ring entries to be free()ed. */
struct sk_buff *tx_skb; /* Packet being eaten by bus master ctrl. */
int capabilities; /* Adapter capabilities word. */
int options; /* User-settable misc. driver options. */
int last_rx_packets; /* For media autoselection. */
unsigned int available_media:8, /* From Wn3_Options */
media_override:3, /* Passed-in media type. */
default_media:3, /* Read from the EEPROM. */
full_duplex:1, autoselect:1, bus_master:1, /* Vortex can only do a fragment bus-m. */
full_bus_master_tx:1, full_bus_master_rx:1, /* Boomerang */
tx_full:1;
};
/* The action to take with a media selection timer tick.
Note that we deviate from the 3Com order by checking 10base2 before AUI.
*/
enum xcvr_types {
XCVR_10baseT =
0, XCVR_AUI, XCVR_10baseTOnly, XCVR_10base2, XCVR_100baseTx,
XCVR_100baseFx, XCVR_MII = 6, XCVR_Default = 8,
};
static struct media_table {
char *name;
unsigned int media_bits:16, /* Bits to set in Wn4_Media register. */
mask:8, /* The transceiver-present bit in Wn3_Config. */
next:8; /* The media type to try next. */
short wait; /* Time before we check media status. */
} media_tbl[] = {
{
"10baseT", Media_10TP, 0x08, XCVR_10base2, (14 * HZ) / 10}
, {
"10Mbs AUI", Media_SQE, 0x20, XCVR_Default, (1 * HZ) / 10}
, {
"undefined", 0, 0x80, XCVR_10baseT, 10000}
, {
"10base2", 0, 0x10, XCVR_AUI, (1 * HZ) / 10}
, {
"100baseTX", Media_Lnk, 0x02, XCVR_100baseFx,
(14 * HZ) / 10}
, {
"100baseFX", Media_Lnk, 0x04, XCVR_MII, (14 * HZ) / 10}
, {
"MII", 0, 0x40, XCVR_10baseT, 3 * HZ}
, {
"undefined", 0, 0x01, XCVR_10baseT, 10000}
, {
"Default", 0, 0xFF, XCVR_10baseT, 10000}
,};
/* TILEG Modified to remove reference to dev */
static int corkscrew_found_device(int ioaddr, int irq, int product_index,
int options, struct nic *nic);
static int corkscrew_probe1(int ioaddr, int irq, int product_index,
struct nic *nic);
/* This driver uses 'options' to pass the media type, full-duplex flag, etc. */
/* Note: this is the only limit on the number of cards supported!! */
static int options = -1;
/* End Brought directly from 3c515.c by Becker */
/**************************************************************************
RESET - Reset adapter
***************************************************************************/
static void t515_reset(struct nic *nic)
{
union wn3_config config;
int i;
/* Before initializing select the active media port. */
EL3WINDOW(3);
if (vp->full_duplex)
outb(0x20, nic->ioaddr + Wn3_MAC_Ctrl); /* Set the full-duplex bit. */
config.i = inl(nic->ioaddr + Wn3_Config);
if (vp->media_override != 7) {
DBG ( "Media override to transceiver %d (%s).\n",
vp->media_override,
media_tbl[vp->media_override].name);
if_port = vp->media_override;
} else if (vp->autoselect) {
/* Find first available media type, starting with 100baseTx. */
if_port = 4;
while (!(vp->available_media & media_tbl[if_port].mask))
if_port = media_tbl[if_port].next;
DBG ( "Initial media type %s.\n",
media_tbl[if_port].name);
} else
if_port = vp->default_media;
config.u.xcvr = if_port;
outl(config.i, nic->ioaddr + Wn3_Config);
DBG ( "corkscrew_open() InternalConfig 0x%hX.\n",
config.i);
outw(TxReset, nic->ioaddr + EL3_CMD);
for (i = 20; i >= 0; i--)
if (!(inw(nic->ioaddr + EL3_STATUS) & CmdInProgress))
break;
outw(RxReset, nic->ioaddr + EL3_CMD);
/* Wait a few ticks for the RxReset command to complete. */
for (i = 20; i >= 0; i--)
if (!(inw(nic->ioaddr + EL3_STATUS) & CmdInProgress))
break;
outw(SetStatusEnb | 0x00, nic->ioaddr + EL3_CMD);
#ifdef debug_3c515
EL3WINDOW(4);
DBG ( "FIXME: fix print for irq, not 9" );
DBG ( "corkscrew_open() irq %d media status 0x%hX.\n",
9, inw(nic->ioaddr + Wn4_Media) );
#endif
/* Set the station address and mask in window 2 each time opened. */
EL3WINDOW(2);
for (i = 0; i < 6; i++)
outb(nic->node_addr[i], nic->ioaddr + i);
for (; i < 12; i += 2)
outw(0, nic->ioaddr + i);
if (if_port == 3)
/* Start the thinnet transceiver. We should really wait 50ms... */
outw(StartCoax, nic->ioaddr + EL3_CMD);
EL3WINDOW(4);
outw((inw(nic->ioaddr + Wn4_Media) & ~(Media_10TP | Media_SQE)) |
media_tbl[if_port].media_bits, nic->ioaddr + Wn4_Media);
/* Switch to the stats window, and clear all stats by reading. */
/* outw(StatsDisable, nic->ioaddr + EL3_CMD);*/
EL3WINDOW(6);
for (i = 0; i < 10; i++)
inb(nic->ioaddr + i);
inw(nic->ioaddr + 10);
inw(nic->ioaddr + 12);
/* New: On the Vortex we must also clear the BadSSD counter. */
EL3WINDOW(4);
inb(nic->ioaddr + 12);
/* ..and on the Boomerang we enable the extra statistics bits. */
outw(0x0040, nic->ioaddr + Wn4_NetDiag);
/* Switch to register set 7 for normal use. */
EL3WINDOW(7);
/* Temporarily left in place. If these FIXMEs are printed
it meand that special logic for that card may need to be added
see Becker's 3c515.c driver */
if (vp->full_bus_master_rx) { /* Boomerang bus master. */
printf("FIXME: Is this if necessary");
vp->cur_rx = vp->dirty_rx = 0;
DBG ( " Filling in the Rx ring.\n" );
for (i = 0; i < RX_RING_SIZE; i++) {
printf("FIXME: Is this if necessary");
}
}
if (vp->full_bus_master_tx) { /* Boomerang bus master Tx. */
vp->cur_tx = vp->dirty_tx = 0;
outb(PKT_BUF_SZ >> 8, nic->ioaddr + TxFreeThreshold); /* Room for a packet. */
/* Clear the Tx ring. */
for (i = 0; i < TX_RING_SIZE; i++)
vp->tx_skbuff[i] = 0;
outl(0, nic->ioaddr + DownListPtr);
}
/* Set receiver mode: presumably accept b-case and phys addr only. */
outw(SetRxFilter | RxStation | RxMulticast | RxBroadcast | RxProm,
nic->ioaddr + EL3_CMD);
outw(RxEnable, nic->ioaddr + EL3_CMD); /* Enable the receiver. */
outw(TxEnable, nic->ioaddr + EL3_CMD); /* Enable transmitter. */
/* Allow status bits to be seen. */
outw(SetStatusEnb | AdapterFailure | IntReq | StatsFull |
(vp->full_bus_master_tx ? DownComplete : TxAvailable) |
(vp->full_bus_master_rx ? UpComplete : RxComplete) |
(vp->bus_master ? DMADone : 0), nic->ioaddr + EL3_CMD);
/* Ack all pending events, and set active indicator mask. */
outw(AckIntr | IntLatch | TxAvailable | RxEarly | IntReq,
nic->ioaddr + EL3_CMD);
outw(SetIntrEnb | IntLatch | TxAvailable | RxComplete | StatsFull
| (vp->bus_master ? DMADone : 0) | UpComplete | DownComplete,
nic->ioaddr + EL3_CMD);
}
/**************************************************************************
POLL - Wait for a frame
***************************************************************************/
static int t515_poll(struct nic *nic, int retrieve)
{
short status, cst;
register short rx_fifo;
cst = inw(nic->ioaddr + EL3_STATUS);
if ((cst & RxComplete) == 0) {
/* Ack all pending events, and set active indicator mask. */
outw(AckIntr | IntLatch | TxAvailable | RxEarly | IntReq,
nic->ioaddr + EL3_CMD);
outw(SetIntrEnb | IntLatch | TxAvailable | RxComplete |
StatsFull | (vp->
bus_master ? DMADone : 0) | UpComplete |
DownComplete, nic->ioaddr + EL3_CMD);
return 0;
}
status = inw(nic->ioaddr + RxStatus);
if (status & RxDError) {
printf("RxDError\n");
outw(RxDiscard, nic->ioaddr + EL3_CMD);
return 0;
}
rx_fifo = status & RX_BYTES_MASK;
if (rx_fifo == 0)
return 0;
if ( ! retrieve ) return 1;
DBG ( "[l=%d", rx_fifo );
insw(nic->ioaddr + RX_FIFO, nic->packet, rx_fifo / 2);
if (rx_fifo & 1)
nic->packet[rx_fifo - 1] = inb(nic->ioaddr + RX_FIFO);
nic->packetlen = rx_fifo;
while (1) {
status = inw(nic->ioaddr + RxStatus);
DBG ( "0x%hX*", status );
rx_fifo = status & RX_BYTES_MASK;
if (rx_fifo > 0) {
insw(nic->ioaddr + RX_FIFO, nic->packet + nic->packetlen,
rx_fifo / 2);
if (rx_fifo & 1)
nic->packet[nic->packetlen + rx_fifo - 1] =
inb(nic->ioaddr + RX_FIFO);
nic->packetlen += rx_fifo;
DBG ( "+%d", rx_fifo );
}
if ((status & RxComplete) == 0) {
DBG ( "=%d", nic->packetlen );
break;
}
udelay(1000);
}
/* acknowledge reception of packet */
outw(RxDiscard, nic->ioaddr + EL3_CMD);
while (inw(nic->ioaddr + EL3_STATUS) & CmdInProgress);
#ifdef debug_3c515
{
unsigned short type = 0;
type = (nic->packet[12] << 8) | nic->packet[13];
if (nic->packet[0] + nic->packet[1] + nic->packet[2] +
nic->packet[3] + nic->packet[4] + nic->packet[5] ==
0xFF * ETH_ALEN)
DBG ( ",t=0x%hX,b]", type );
else
DBG ( ",t=0x%hX]", type );
}
#endif
return 1;
}
/*************************************************************************
3Com 515 - specific routines
**************************************************************************/
static char padmap[] = {
0, 3, 2, 1
};
/**************************************************************************
TRANSMIT - Transmit a frame
***************************************************************************/
static void t515_transmit(struct nic *nic, const char *d, /* Destination */
unsigned int t, /* Type */
unsigned int s, /* size */
const char *p)
{ /* Packet */
register int len;
int pad;
int status;
DBG ( "{l=%d,t=0x%hX}", s + ETH_HLEN, t );
/* swap bytes of type */
t = htons(t);
len = s + ETH_HLEN; /* actual length of packet */
pad = padmap[len & 3];
/*
* The 3c515 automatically pads short packets to minimum ethernet length,
* but we drop packets that are too large. Perhaps we should truncate
* them instead?
Copied from 3c595. Is this true for the 3c515?
*/
if (len + pad > ETH_FRAME_LEN) {
return;
}
/* drop acknowledgements */
while ((status = inb(nic->ioaddr + TxStatus)) & TxComplete) {
/*if(status & (TXS_UNDERRUN|0x88|TXS_STATUS_OVERFLOW)) { */
outw(TxReset, nic->ioaddr + EL3_CMD);
outw(TxEnable, nic->ioaddr + EL3_CMD);
/* } */
outb(0x0, nic->ioaddr + TxStatus);
}
while (inw(nic->ioaddr + TxFree) < len + pad + 4) {
/* no room in FIFO */
}
outw(len, nic->ioaddr + TX_FIFO);
outw(0x0, nic->ioaddr + TX_FIFO); /* Second dword meaningless */
/* write packet */
outsw(nic->ioaddr + TX_FIFO, d, ETH_ALEN / 2);
outsw(nic->ioaddr + TX_FIFO, nic->node_addr, ETH_ALEN / 2);
outw(t, nic->ioaddr + TX_FIFO);
outsw(nic->ioaddr + TX_FIFO, p, s / 2);
if (s & 1)
outb(*(p + s - 1), nic->ioaddr + TX_FIFO);
while (pad--)
outb(0, nic->ioaddr + TX_FIFO); /* Padding */
/* wait for Tx complete */
while ((inw(nic->ioaddr + EL3_STATUS) & CmdInProgress) != 0);
}
/**************************************************************************
DISABLE - Turn off ethernet interface
***************************************************************************/
static void t515_disable ( struct nic *nic,
struct isapnp_device *isapnp ) {
t515_reset(nic);
/* This is a hack. Since ltsp worked on my
system without any disable functionality I
have no way to determine if this works */
/* Disable the receiver and transmitter. */
outw(RxDisable, nic->ioaddr + EL3_CMD);
outw(TxDisable, nic->ioaddr + EL3_CMD);
if (if_port == XCVR_10base2)
/* Turn off thinnet power. Green! */
outw(StopCoax, nic->ioaddr + EL3_CMD);
outw(SetIntrEnb | 0x0000, nic->ioaddr + EL3_CMD);
deactivate_isapnp_device ( isapnp );
return;
}
static void t515_irq(struct nic *nic __unused, irq_action_t action __unused)
{
switch ( action ) {
case DISABLE :
break;
case ENABLE :
break;
case FORCE :
break;
}
}
static struct nic_operations t515_operations = {
.connect = dummy_connect,
.poll = t515_poll,
.transmit = t515_transmit,
.irq = t515_irq,
};
/**************************************************************************
PROBE - Look for an adapter, this routine's visible to the outside
You should omit the last argument struct pci_device * for a non-PCI NIC
***************************************************************************/
static int t515_probe ( struct nic *nic, struct isapnp_device *isapnp ) {
/* Direct copy from Beckers 3c515.c removing any ISAPNP sections */
nic->ioaddr = isapnp->ioaddr;
nic->irqno = isapnp->irqno;
activate_isapnp_device ( isapnp );
/* Check the resource configuration for a matching ioaddr. */
if ((unsigned)(inw(nic->ioaddr + 0x2002) & 0x1f0)
!= (nic->ioaddr & 0x1f0)) {
DBG ( "3c515 ioaddr mismatch\n" );
return 0;
}
/* Verify by reading the device ID from the EEPROM. */
{
int timer;
outw(EEPROM_Read + 7, nic->ioaddr + Wn0EepromCmd);
/* Pause for at least 162 us. for the read to take place. */
for (timer = 4; timer >= 0; timer--) {
t3c515_wait(1);
if ((inw(nic->ioaddr + Wn0EepromCmd) & 0x0200) == 0)
break;
}
if (inw(nic->ioaddr + Wn0EepromData) != 0x6d50) {
DBG ( "3c515 read incorrect vendor ID from EEPROM" );
return 0;
}
}
DBG ( "3c515 Resource configuration register 0x%X, DCR 0x%hX.\n",
inl(nic->ioaddr + 0x2002), inw(nic->ioaddr + 0x2000) );
corkscrew_found_device(nic->ioaddr, nic->irqno, CORKSCREW_ID,
options, nic);
t515_reset(nic);
nic->nic_op = &t515_operations;
return 1;
}
static int
corkscrew_found_device(int ioaddr, int irq,
int product_index, int options, struct nic *nic)
{
/* Direct copy from Becker 3c515.c with unecessary parts removed */
vp->product_name = "3c515";
vp->options = options;
if (options >= 0) {
vp->media_override =
((options & 7) == 2) ? 0 : options & 7;
vp->full_duplex = (options & 8) ? 1 : 0;
vp->bus_master = (options & 16) ? 1 : 0;
} else {
vp->media_override = 7;
vp->full_duplex = 0;
vp->bus_master = 0;
}
corkscrew_probe1(ioaddr, irq, product_index, nic);
return 0;
}
static int
corkscrew_probe1(int ioaddr, int irq, int product_index __unused,
struct nic *nic)
{
unsigned int eeprom[0x40], checksum = 0; /* EEPROM contents */
int i;
printf("3Com %s at 0x%hX, ", vp->product_name, ioaddr);
/* Read the station address from the EEPROM. */
EL3WINDOW(0);
for (i = 0; i < 0x18; i++) {
short *phys_addr = (short *) nic->node_addr;
int timer;
outw(EEPROM_Read + i, ioaddr + Wn0EepromCmd);
/* Pause for at least 162 us. for the read to take place. */
for (timer = 4; timer >= 0; timer--) {
t3c515_wait(1);
if ((inw(ioaddr + Wn0EepromCmd) & 0x0200) == 0)
break;
}
eeprom[i] = inw(ioaddr + Wn0EepromData);
DBG ( "Value %d: %hX ", i, eeprom[i] );
checksum ^= eeprom[i];
if (i < 3)
phys_addr[i] = htons(eeprom[i]);
}
checksum = (checksum ^ (checksum >> 8)) & 0xff;
if (checksum != 0x00)
printf(" ***INVALID CHECKSUM 0x%hX*** ", checksum);
DBG ( "%s", eth_ntoa ( nic->node_addr ) );
if (eeprom[16] == 0x11c7) { /* Corkscrew */
}
printf(", IRQ %d\n", irq);
/* Tell them about an invalid IRQ. */
if ( (irq <= 0 || irq > 15) ) {
DBG (" *** Warning: this IRQ is unlikely to work! ***\n" );
}
{
char *ram_split[] = { "5:3", "3:1", "1:1", "3:5" };
union wn3_config config;
EL3WINDOW(3);
vp->available_media = inw(ioaddr + Wn3_Options);
config.i = inl(ioaddr + Wn3_Config);
DBG ( " Internal config register is %4.4x, "
"transceivers 0x%hX.\n",
config.i, inw(ioaddr + Wn3_Options) );
printf
(" %dK %s-wide RAM %s Rx:Tx split, %s%s interface.\n",
8 << config.u.ram_size,
config.u.ram_width ? "word" : "byte",
ram_split[config.u.ram_split],
config.u.autoselect ? "autoselect/" : "",
media_tbl[config.u.xcvr].name);
if_port = config.u.xcvr;
vp->default_media = config.u.xcvr;
vp->autoselect = config.u.autoselect;
}
if (vp->media_override != 7) {
printf(" Media override to transceiver type %d (%s).\n",
vp->media_override,
media_tbl[vp->media_override].name);
if_port = vp->media_override;
}
vp->capabilities = eeprom[16];
vp->full_bus_master_tx = (vp->capabilities & 0x20) ? 1 : 0;
/* Rx is broken at 10mbps, so we always disable it. */
/* vp->full_bus_master_rx = 0; */
vp->full_bus_master_rx = (vp->capabilities & 0x20) ? 1 : 0;
return 0;
}
static struct isapnp_device_id t515_adapters[] = {
{ "3c515 (ISAPnP)", ISAPNP_VENDOR('T','C','M'), 0x5051 },
};
ISAPNP_DRIVER ( t515_driver, t515_adapters );
DRIVER ( "3c515", nic_driver, isapnp_driver, t515_driver,
t515_probe, t515_disable );
ISA_ROM ( "3c515", "3c515 Fast EtherLink ISAPnP" );