// Copyright (c) 2010 Google Inc. All Rights Reserved.
//
// Redistribution and use in source and binary forms, with or without
// modification, are permitted provided that the following conditions are
// met:
//
// * Redistributions of source code must retain the above copyright
// notice, this list of conditions and the following disclaimer.
// * Redistributions in binary form must reproduce the above
// copyright notice, this list of conditions and the following disclaimer
// in the documentation and/or other materials provided with the
// distribution.
// * Neither the name of Google Inc. nor the names of its
// contributors may be used to endorse or promote products derived from
// this software without specific prior written permission.
//
// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
// "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
// LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
// A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
// OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
// SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
// LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
// DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
// THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
// (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
// OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
// CFI reader author: Jim Blandy <jimb@mozilla.com> <jimb@red-bean.com>
// Implementation of dwarf2reader::LineInfo, dwarf2reader::CompilationUnit,
// and dwarf2reader::CallFrameInfo. See dwarf2reader.h for details.
#include "common/dwarf/dwarf2reader.h"
#include <assert.h>
#include <stdint.h>
#include <stdio.h>
#include <string.h>
#include <map>
#include <memory>
#include <stack>
#include <string>
#include <utility>
#include "common/dwarf/bytereader-inl.h"
#include "common/dwarf/bytereader.h"
#include "common/dwarf/line_state_machine.h"
#include "common/using_std_string.h"
namespace dwarf2reader {
CompilationUnit::CompilationUnit(const SectionMap& sections, uint64 offset,
ByteReader* reader, Dwarf2Handler* handler)
: offset_from_section_start_(offset), reader_(reader),
sections_(sections), handler_(handler), abbrevs_(NULL),
string_buffer_(NULL), string_buffer_length_(0) {}
// Read a DWARF2/3 abbreviation section.
// Each abbrev consists of a abbreviation number, a tag, a byte
// specifying whether the tag has children, and a list of
// attribute/form pairs.
// The list of forms is terminated by a 0 for the attribute, and a
// zero for the form. The entire abbreviation section is terminated
// by a zero for the code.
void CompilationUnit::ReadAbbrevs() {
if (abbrevs_)
return;
// First get the debug_abbrev section. ".debug_abbrev" is the name
// recommended in the DWARF spec, and used on Linux;
// "__debug_abbrev" is the name used in Mac OS X Mach-O files.
SectionMap::const_iterator iter = sections_.find(".debug_abbrev");
if (iter == sections_.end())
iter = sections_.find("__debug_abbrev");
assert(iter != sections_.end());
abbrevs_ = new std::vector<Abbrev>;
abbrevs_->resize(1);
// The only way to check whether we are reading over the end of the
// buffer would be to first compute the size of the leb128 data by
// reading it, then go back and read it again.
const char* abbrev_start = iter->second.first +
header_.abbrev_offset;
const char* abbrevptr = abbrev_start;
#ifndef NDEBUG
const uint64 abbrev_length = iter->second.second - header_.abbrev_offset;
#endif
while (1) {
CompilationUnit::Abbrev abbrev;
size_t len;
const uint64 number = reader_->ReadUnsignedLEB128(abbrevptr, &len);
if (number == 0)
break;
abbrev.number = number;
abbrevptr += len;
assert(abbrevptr < abbrev_start + abbrev_length);
const uint64 tag = reader_->ReadUnsignedLEB128(abbrevptr, &len);
abbrevptr += len;
abbrev.tag = static_cast<enum DwarfTag>(tag);
assert(abbrevptr < abbrev_start + abbrev_length);
abbrev.has_children = reader_->ReadOneByte(abbrevptr);
abbrevptr += 1;
assert(abbrevptr < abbrev_start + abbrev_length);
while (1) {
const uint64 nametemp = reader_->ReadUnsignedLEB128(abbrevptr, &len);
abbrevptr += len;
assert(abbrevptr < abbrev_start + abbrev_length);
const uint64 formtemp = reader_->ReadUnsignedLEB128(abbrevptr, &len);
abbrevptr += len;
if (nametemp == 0 && formtemp == 0)
break;
const enum DwarfAttribute name =
static_cast<enum DwarfAttribute>(nametemp);
const enum DwarfForm form = static_cast<enum DwarfForm>(formtemp);
abbrev.attributes.push_back(std::make_pair(name, form));
}
assert(abbrev.number == abbrevs_->size());
abbrevs_->push_back(abbrev);
}
}
// Skips a single DIE's attributes.
const char* CompilationUnit::SkipDIE(const char* start,
const Abbrev& abbrev) {
for (AttributeList::const_iterator i = abbrev.attributes.begin();
i != abbrev.attributes.end();
i++) {
start = SkipAttribute(start, i->second);
}
return start;
}
// Skips a single attribute form's data.
const char* CompilationUnit::SkipAttribute(const char* start,
enum DwarfForm form) {
size_t len;
switch (form) {
case DW_FORM_indirect:
form = static_cast<enum DwarfForm>(reader_->ReadUnsignedLEB128(start,
&len));
start += len;
return SkipAttribute(start, form);
case DW_FORM_flag_present:
return start;
case DW_FORM_data1:
case DW_FORM_flag:
case DW_FORM_ref1:
return start + 1;
case DW_FORM_ref2:
case DW_FORM_data2:
return start + 2;
case DW_FORM_ref4:
case DW_FORM_data4:
return start + 4;
case DW_FORM_ref8:
case DW_FORM_data8:
case DW_FORM_ref_sig8:
return start + 8;
case DW_FORM_string:
return start + strlen(start) + 1;
case DW_FORM_udata:
case DW_FORM_ref_udata:
reader_->ReadUnsignedLEB128(start, &len);
return start + len;
case DW_FORM_sdata:
reader_->ReadSignedLEB128(start, &len);
return start + len;
case DW_FORM_addr:
return start + reader_->AddressSize();
case DW_FORM_ref_addr:
// DWARF2 and 3/4 differ on whether ref_addr is address size or
// offset size.
assert(header_.version >= 2);
if (header_.version == 2) {
return start + reader_->AddressSize();
} else if (header_.version >= 3) {
return start + reader_->OffsetSize();
}
break;
case DW_FORM_block1:
return start + 1 + reader_->ReadOneByte(start);
case DW_FORM_block2:
return start + 2 + reader_->ReadTwoBytes(start);
case DW_FORM_block4:
return start + 4 + reader_->ReadFourBytes(start);
case DW_FORM_block:
case DW_FORM_exprloc: {
uint64 size = reader_->ReadUnsignedLEB128(start, &len);
return start + size + len;
}
case DW_FORM_strp:
case DW_FORM_sec_offset:
return start + reader_->OffsetSize();
}
fprintf(stderr,"Unhandled form type");
return NULL;
}
// Read a DWARF2/3 header.
// The header is variable length in DWARF3 (and DWARF2 as extended by
// most compilers), and consists of an length field, a version number,
// the offset in the .debug_abbrev section for our abbrevs, and an
// address size.
void CompilationUnit::ReadHeader() {
const char* headerptr = buffer_;
size_t initial_length_size;
assert(headerptr + 4 < buffer_ + buffer_length_);
const uint64 initial_length
= reader_->ReadInitialLength(headerptr, &initial_length_size);
headerptr += initial_length_size;
header_.length = initial_length;
assert(headerptr + 2 < buffer_ + buffer_length_);
header_.version = reader_->ReadTwoBytes(headerptr);
headerptr += 2;
assert(headerptr + reader_->OffsetSize() < buffer_ + buffer_length_);
header_.abbrev_offset = reader_->ReadOffset(headerptr);
headerptr += reader_->OffsetSize();
assert(headerptr + 1 < buffer_ + buffer_length_);
header_.address_size = reader_->ReadOneByte(headerptr);
reader_->SetAddressSize(header_.address_size);
headerptr += 1;
after_header_ = headerptr;
// This check ensures that we don't have to do checking during the
// reading of DIEs. header_.length does not include the size of the
// initial length.
assert(buffer_ + initial_length_size + header_.length <=
buffer_ + buffer_length_);
}
uint64 CompilationUnit::Start() {
// First get the debug_info section. ".debug_info" is the name
// recommended in the DWARF spec, and used on Linux; "__debug_info"
// is the name used in Mac OS X Mach-O files.
SectionMap::const_iterator iter = sections_.find(".debug_info");
if (iter == sections_.end())
iter = sections_.find("__debug_info");
assert(iter != sections_.end());
// Set up our buffer
buffer_ = iter->second.first + offset_from_section_start_;
buffer_length_ = iter->second.second - offset_from_section_start_;
// Read the header
ReadHeader();
// Figure out the real length from the end of the initial length to
// the end of the compilation unit, since that is the value we
// return.
uint64 ourlength = header_.length;
if (reader_->OffsetSize() == 8)
ourlength += 12;
else
ourlength += 4;
// See if the user wants this compilation unit, and if not, just return.
if (!handler_->StartCompilationUnit(offset_from_section_start_,
reader_->AddressSize(),
reader_->OffsetSize(),
header_.length,
header_.version))
return ourlength;
// Otherwise, continue by reading our abbreviation entries.
ReadAbbrevs();
// Set the string section if we have one. ".debug_str" is the name
// recommended in the DWARF spec, and used on Linux; "__debug_str"
// is the name used in Mac OS X Mach-O files.
iter = sections_.find(".debug_str");
if (iter == sections_.end())
iter = sections_.find("__debug_str");
if (iter != sections_.end()) {
string_buffer_ = iter->second.first;
string_buffer_length_ = iter->second.second;
}
// Now that we have our abbreviations, start processing DIE's.
ProcessDIEs();
return ourlength;
}
// If one really wanted, you could merge SkipAttribute and
// ProcessAttribute
// This is all boring data manipulation and calling of the handler.
const char* CompilationUnit::ProcessAttribute(
uint64 dieoffset, const char* start, enum DwarfAttribute attr,
enum DwarfForm form) {
size_t len;
switch (form) {
// DW_FORM_indirect is never used because it is such a space
// waster.
case DW_FORM_indirect:
form = static_cast<enum DwarfForm>(reader_->ReadUnsignedLEB128(start,
&len));
start += len;
return ProcessAttribute(dieoffset, start, attr, form);
case DW_FORM_flag_present:
handler_->ProcessAttributeUnsigned(dieoffset, attr, form, 1);
return start;
case DW_FORM_data1:
case DW_FORM_flag:
handler_->ProcessAttributeUnsigned(dieoffset, attr, form,
reader_->ReadOneByte(start));
return start + 1;
case DW_FORM_data2:
handler_->ProcessAttributeUnsigned(dieoffset, attr, form,
reader_->ReadTwoBytes(start));
return start + 2;
case DW_FORM_data4:
handler_->ProcessAttributeUnsigned(dieoffset, attr, form,
reader_->ReadFourBytes(start));
return start + 4;
case DW_FORM_data8:
handler_->ProcessAttributeUnsigned(dieoffset, attr, form,
reader_->ReadEightBytes(start));
return start + 8;
case DW_FORM_string: {
const char* str = start;
handler_->ProcessAttributeString(dieoffset, attr, form,
str);
return start + strlen(str) + 1;
}
case DW_FORM_udata:
handler_->ProcessAttributeUnsigned(dieoffset, attr, form,
reader_->ReadUnsignedLEB128(start,
&len));
return start + len;
case DW_FORM_sdata:
handler_->ProcessAttributeSigned(dieoffset, attr, form,
reader_->ReadSignedLEB128(start, &len));
return start + len;
case DW_FORM_addr:
handler_->ProcessAttributeUnsigned(dieoffset, attr, form,
reader_->ReadAddress(start));
return start + reader_->AddressSize();
case DW_FORM_sec_offset:
handler_->ProcessAttributeUnsigned(dieoffset, attr, form,
reader_->ReadOffset(start));
return start + reader_->OffsetSize();
case DW_FORM_ref1:
handler_->ProcessAttributeReference(dieoffset, attr, form,
reader_->ReadOneByte(start)
+ offset_from_section_start_);
return start + 1;
case DW_FORM_ref2:
handler_->ProcessAttributeReference(dieoffset, attr, form,
reader_->ReadTwoBytes(start)
+ offset_from_section_start_);
return start + 2;
case DW_FORM_ref4:
handler_->ProcessAttributeReference(dieoffset, attr, form,
reader_->ReadFourBytes(start)
+ offset_from_section_start_);
return start + 4;
case DW_FORM_ref8:
handler_->ProcessAttributeReference(dieoffset, attr, form,
reader_->ReadEightBytes(start)
+ offset_from_section_start_);
return start + 8;
case DW_FORM_ref_udata:
handler_->ProcessAttributeReference(dieoffset, attr, form,
reader_->ReadUnsignedLEB128(start,
&len)
+ offset_from_section_start_);
return start + len;
case DW_FORM_ref_addr:
// DWARF2 and 3/4 differ on whether ref_addr is address size or
// offset size.
assert(header_.version >= 2);
if (header_.version == 2) {
handler_->ProcessAttributeReference(dieoffset, attr, form,
reader_->ReadAddress(start));
return start + reader_->AddressSize();
} else if (header_.version >= 3) {
handler_->ProcessAttributeReference(dieoffset, attr, form,
reader_->ReadOffset(start));
return start + reader_->OffsetSize();
}
break;
case DW_FORM_ref_sig8:
handler_->ProcessAttributeSignature(dieoffset, attr, form,
reader_->ReadEightBytes(start));
return start + 8;
case DW_FORM_block1: {
uint64 datalen = reader_->ReadOneByte(start);
handler_->ProcessAttributeBuffer(dieoffset, attr, form, start + 1,
datalen);
return start + 1 + datalen;
}
case DW_FORM_block2: {
uint64 datalen = reader_->ReadTwoBytes(start);
handler_->ProcessAttributeBuffer(dieoffset, attr, form, start + 2,
datalen);
return start + 2 + datalen;
}
case DW_FORM_block4: {
uint64 datalen = reader_->ReadFourBytes(start);
handler_->ProcessAttributeBuffer(dieoffset, attr, form, start + 4,
datalen);
return start + 4 + datalen;
}
case DW_FORM_block:
case DW_FORM_exprloc: {
uint64 datalen = reader_->ReadUnsignedLEB128(start, &len);
handler_->ProcessAttributeBuffer(dieoffset, attr, form, start + len,
datalen);
return start + datalen + len;
}
case DW_FORM_strp: {
assert(string_buffer_ != NULL);
const uint64 offset = reader_->ReadOffset(start);
assert(string_buffer_ + offset < string_buffer_ + string_buffer_length_);
const char* str = string_buffer_ + offset;
handler_->ProcessAttributeString(dieoffset, attr, form,
str);
return start + reader_->OffsetSize();
}
}
fprintf(stderr, "Unhandled form type\n");
return NULL;
}
const char* CompilationUnit::ProcessDIE(uint64 dieoffset,
const char* start,
const Abbrev& abbrev) {
for (AttributeList::const_iterator i = abbrev.attributes.begin();
i != abbrev.attributes.end();
i++) {
start = ProcessAttribute(dieoffset, start, i->first, i->second);
}
return start;
}
void CompilationUnit::ProcessDIEs() {
const char* dieptr = after_header_;
size_t len;
// lengthstart is the place the length field is based on.
// It is the point in the header after the initial length field
const char* lengthstart = buffer_;
// In 64 bit dwarf, the initial length is 12 bytes, because of the
// 0xffffffff at the start.
if (reader_->OffsetSize() == 8)
lengthstart += 12;
else
lengthstart += 4;
std::stack<uint64> die_stack;
while (dieptr < (lengthstart + header_.length)) {
// We give the user the absolute offset from the beginning of
// debug_info, since they need it to deal with ref_addr forms.
uint64 absolute_offset = (dieptr - buffer_) + offset_from_section_start_;
uint64 abbrev_num = reader_->ReadUnsignedLEB128(dieptr, &len);
dieptr += len;
// Abbrev == 0 represents the end of a list of children, or padding
// at the end of the compilation unit.
if (abbrev_num == 0) {
if (die_stack.size() == 0)
// If it is padding, then we are done with the compilation unit's DIEs.
return;
const uint64 offset = die_stack.top();
die_stack.pop();
handler_->EndDIE(offset);
continue;
}
const Abbrev& abbrev = abbrevs_->at(static_cast<size_t>(abbrev_num));
const enum DwarfTag tag = abbrev.tag;
if (!handler_->StartDIE(absolute_offset, tag)) {
dieptr = SkipDIE(dieptr, abbrev);
} else {
dieptr = ProcessDIE(absolute_offset, dieptr, abbrev);
}
if (abbrev.has_children) {
die_stack.push(absolute_offset);
} else {
handler_->EndDIE(absolute_offset);
}
}
}
LineInfo::LineInfo(const char* buffer, uint64 buffer_length,
ByteReader* reader, LineInfoHandler* handler):
handler_(handler), reader_(reader), buffer_(buffer),
buffer_length_(buffer_length) {
header_.std_opcode_lengths = NULL;
}
uint64 LineInfo::Start() {
ReadHeader();
ReadLines();
return after_header_ - buffer_;
}
// The header for a debug_line section is mildly complicated, because
// the line info is very tightly encoded.
void LineInfo::ReadHeader() {
const char* lineptr = buffer_;
size_t initial_length_size;
const uint64 initial_length
= reader_->ReadInitialLength(lineptr, &initial_length_size);
lineptr += initial_length_size;
header_.total_length = initial_length;
assert(buffer_ + initial_length_size + header_.total_length <=
buffer_ + buffer_length_);
// Address size *must* be set by CU ahead of time.
assert(reader_->AddressSize() != 0);
header_.version = reader_->ReadTwoBytes(lineptr);
lineptr += 2;
header_.prologue_length = reader_->ReadOffset(lineptr);
lineptr += reader_->OffsetSize();
header_.min_insn_length = reader_->ReadOneByte(lineptr);
lineptr += 1;
header_.default_is_stmt = reader_->ReadOneByte(lineptr);
lineptr += 1;
header_.line_base = *reinterpret_cast<const int8*>(lineptr);
lineptr += 1;
header_.line_range = reader_->ReadOneByte(lineptr);
lineptr += 1;
header_.opcode_base = reader_->ReadOneByte(lineptr);
lineptr += 1;
header_.std_opcode_lengths = new std::vector<unsigned char>;
header_.std_opcode_lengths->resize(header_.opcode_base + 1);
(*header_.std_opcode_lengths)[0] = 0;
for (int i = 1; i < header_.opcode_base; i++) {
(*header_.std_opcode_lengths)[i] = reader_->ReadOneByte(lineptr);
lineptr += 1;
}
// It is legal for the directory entry table to be empty.
if (*lineptr) {
uint32 dirindex = 1;
while (*lineptr) {
const char* dirname = lineptr;
handler_->DefineDir(dirname, dirindex);
lineptr += strlen(dirname) + 1;
dirindex++;
}
}
lineptr++;
// It is also legal for the file entry table to be empty.
if (*lineptr) {
uint32 fileindex = 1;
size_t len;
while (*lineptr) {
const char* filename = lineptr;
lineptr += strlen(filename) + 1;
uint64 dirindex = reader_->ReadUnsignedLEB128(lineptr, &len);
lineptr += len;
uint64 mod_time = reader_->ReadUnsignedLEB128(lineptr, &len);
lineptr += len;
uint64 filelength = reader_->ReadUnsignedLEB128(lineptr, &len);
lineptr += len;
handler_->DefineFile(filename, fileindex, static_cast<uint32>(dirindex),
mod_time, filelength);
fileindex++;
}
}
lineptr++;
after_header_ = lineptr;
}
/* static */
bool LineInfo::ProcessOneOpcode(ByteReader* reader,
LineInfoHandler* handler,
const struct LineInfoHeader &header,
const char* start,
struct LineStateMachine* lsm,
size_t* len,
uintptr pc,
bool *lsm_passes_pc) {
size_t oplen = 0;
size_t templen;
uint8 opcode = reader->ReadOneByte(start);
oplen++;
start++;
// If the opcode is great than the opcode_base, it is a special
// opcode. Most line programs consist mainly of special opcodes.
if (opcode >= header.opcode_base) {
opcode -= header.opcode_base;
const int64 advance_address = (opcode / header.line_range)
* header.min_insn_length;
const int32 advance_line = (opcode % header.line_range)
+ header.line_base;
// Check if the lsm passes "pc". If so, mark it as passed.
if (lsm_passes_pc &&
lsm->address <= pc && pc < lsm->address + advance_address) {
*lsm_passes_pc = true;
}
lsm->address += advance_address;
lsm->line_num += advance_line;
lsm->basic_block = true;
*len = oplen;
return true;
}
// Otherwise, we have the regular opcodes
switch (opcode) {
case DW_LNS_copy: {
lsm->basic_block = false;
*len = oplen;
return true;
}
case DW_LNS_advance_pc: {
uint64 advance_address = reader->ReadUnsignedLEB128(start, &templen);
oplen += templen;
// Check if the lsm passes "pc". If so, mark it as passed.
if (lsm_passes_pc && lsm->address <= pc &&
pc < lsm->address + header.min_insn_length * advance_address) {
*lsm_passes_pc = true;
}
lsm->address += header.min_insn_length * advance_address;
}
break;
case DW_LNS_advance_line: {
const int64 advance_line = reader->ReadSignedLEB128(start, &templen);
oplen += templen;
lsm->line_num += static_cast<int32>(advance_line);
// With gcc 4.2.1, we can get the line_no here for the first time
// since DW_LNS_advance_line is called after DW_LNE_set_address is
// called. So we check if the lsm passes "pc" here, not in
// DW_LNE_set_address.
if (lsm_passes_pc && lsm->address == pc) {
*lsm_passes_pc = true;
}
}
break;
case DW_LNS_set_file: {
const uint64 fileno = reader->ReadUnsignedLEB128(start, &templen);
oplen += templen;
lsm->file_num = static_cast<uint32>(fileno);
}
break;
case DW_LNS_set_column: {
const uint64 colno = reader->ReadUnsignedLEB128(start, &templen);
oplen += templen;
lsm->column_num = static_cast<uint32>(colno);
}
break;
case DW_LNS_negate_stmt: {
lsm->is_stmt = !lsm->is_stmt;
}
break;
case DW_LNS_set_basic_block: {
lsm->basic_block = true;
}
break;
case DW_LNS_fixed_advance_pc: {
const uint16 advance_address = reader->ReadTwoBytes(start);
oplen += 2;
// Check if the lsm passes "pc". If so, mark it as passed.
if (lsm_passes_pc &&
lsm->address <= pc && pc < lsm->address + advance_address) {
*lsm_passes_pc = true;
}
lsm->address += advance_address;
}
break;
case DW_LNS_const_add_pc: {
const int64 advance_address = header.min_insn_length
* ((255 - header.opcode_base)
/ header.line_range);
// Check if the lsm passes "pc". If so, mark it as passed.
if (lsm_passes_pc &&
lsm->address <= pc && pc < lsm->address + advance_address) {
*lsm_passes_pc = true;
}
lsm->address += advance_address;
}
break;
case DW_LNS_extended_op: {
const uint64 extended_op_len = reader->ReadUnsignedLEB128(start,
&templen);
start += templen;
oplen += templen + extended_op_len;
const uint64 extended_op = reader->ReadOneByte(start);
start++;
switch (extended_op) {
case DW_LNE_end_sequence: {
lsm->end_sequence = true;
*len = oplen;
return true;
}
break;
case DW_LNE_set_address: {
// With gcc 4.2.1, we cannot tell the line_no here since
// DW_LNE_set_address is called before DW_LNS_advance_line is
// called. So we do not check if the lsm passes "pc" here. See
// also the comment in DW_LNS_advance_line.
uint64 address = reader->ReadAddress(start);
lsm->address = address;
}
break;
case DW_LNE_define_file: {
const char* filename = start;
templen = strlen(filename) + 1;
start += templen;
uint64 dirindex = reader->ReadUnsignedLEB128(start, &templen);
oplen += templen;
const uint64 mod_time = reader->ReadUnsignedLEB128(start,
&templen);
oplen += templen;
const uint64 filelength = reader->ReadUnsignedLEB128(start,
&templen);
oplen += templen;
if (handler) {
handler->DefineFile(filename, -1, static_cast<uint32>(dirindex),
mod_time, filelength);
}
}
break;
}
}
break;
default: {
// Ignore unknown opcode silently
if (header.std_opcode_lengths) {
for (int i = 0; i < (*header.std_opcode_lengths)[opcode]; i++) {
reader->ReadUnsignedLEB128(start, &templen);
start += templen;
oplen += templen;
}
}
}
break;
}
*len = oplen;
return false;
}
void LineInfo::ReadLines() {
struct LineStateMachine lsm;
// lengthstart is the place the length field is based on.
// It is the point in the header after the initial length field
const char* lengthstart = buffer_;
// In 64 bit dwarf, the initial length is 12 bytes, because of the
// 0xffffffff at the start.
if (reader_->OffsetSize() == 8)
lengthstart += 12;
else
lengthstart += 4;
const char* lineptr = after_header_;
lsm.Reset(header_.default_is_stmt);
// The LineInfoHandler interface expects each line's length along
// with its address, but DWARF only provides addresses (sans
// length), and an end-of-sequence address; one infers the length
// from the next address. So we report a line only when we get the
// next line's address, or the end-of-sequence address.
bool have_pending_line = false;
uint64 pending_address = 0;
uint32 pending_file_num = 0, pending_line_num = 0, pending_column_num = 0;
while (lineptr < lengthstart + header_.total_length) {
size_t oplength;
bool add_row = ProcessOneOpcode(reader_, handler_, header_,
lineptr, &lsm, &oplength, (uintptr)-1,
NULL);
if (add_row) {
if (have_pending_line)
handler_->AddLine(pending_address, lsm.address - pending_address,
pending_file_num, pending_line_num,
pending_column_num);
if (lsm.end_sequence) {
lsm.Reset(header_.default_is_stmt);
have_pending_line = false;
} else {
pending_address = lsm.address;
pending_file_num = lsm.file_num;
pending_line_num = lsm.line_num;
pending_column_num = lsm.column_num;
have_pending_line = true;
}
}
lineptr += oplength;
}
after_header_ = lengthstart + header_.total_length;
}
// A DWARF rule for recovering the address or value of a register, or
// computing the canonical frame address. There is one subclass of this for
// each '*Rule' member function in CallFrameInfo::Handler.
//
// It's annoying that we have to handle Rules using pointers (because
// the concrete instances can have an arbitrary size). They're small,
// so it would be much nicer if we could just handle them by value
// instead of fretting about ownership and destruction.
//
// It seems like all these could simply be instances of std::tr1::bind,
// except that we need instances to be EqualityComparable, too.
//
// This could logically be nested within State, but then the qualified names
// get horrendous.
class CallFrameInfo::Rule {
public:
virtual ~Rule() { }
// Tell HANDLER that, at ADDRESS in the program, REGISTER can be
// recovered using this rule. If REGISTER is kCFARegister, then this rule
// describes how to compute the canonical frame address. Return what the
// HANDLER member function returned.
virtual bool Handle(Handler *handler,
uint64 address, int register) const = 0;
// Equality on rules. We use these to decide which rules we need
// to report after a DW_CFA_restore_state instruction.
virtual bool operator==(const Rule &rhs) const = 0;
bool operator!=(const Rule &rhs) const { return ! (*this == rhs); }
// Return a pointer to a copy of this rule.
virtual Rule *Copy() const = 0;
// If this is a base+offset rule, change its base register to REG.
// Otherwise, do nothing. (Ugly, but required for DW_CFA_def_cfa_register.)
virtual void SetBaseRegister(unsigned reg) { }
// If this is a base+offset rule, change its offset to OFFSET. Otherwise,
// do nothing. (Ugly, but required for DW_CFA_def_cfa_offset.)
virtual void SetOffset(long long offset) { }
};
// Rule: the value the register had in the caller cannot be recovered.
class CallFrameInfo::UndefinedRule: public CallFrameInfo::Rule {
public:
UndefinedRule() { }
~UndefinedRule() { }
bool Handle(Handler *handler, uint64 address, int reg) const {
return handler->UndefinedRule(address, reg);
}
bool operator==(const Rule &rhs) const {
// dynamic_cast is allowed by the Google C++ Style Guide, if the use has
// been carefully considered; cheap RTTI-like workarounds are forbidden.
const UndefinedRule *our_rhs = dynamic_cast<const UndefinedRule *>(&rhs);
return (our_rhs != NULL);
}
Rule *Copy() const { return new UndefinedRule(*this); }
};
// Rule: the register's value is the same as that it had in the caller.
class CallFrameInfo::SameValueRule: public CallFrameInfo::Rule {
public:
SameValueRule() { }
~SameValueRule() { }
bool Handle(Handler *handler, uint64 address, int reg) const {
return handler->SameValueRule(address, reg);
}
bool operator==(const Rule &rhs) const {
// dynamic_cast is allowed by the Google C++ Style Guide, if the use has
// been carefully considered; cheap RTTI-like workarounds are forbidden.
const SameValueRule *our_rhs = dynamic_cast<const SameValueRule *>(&rhs);
return (our_rhs != NULL);
}
Rule *Copy() const { return new SameValueRule(*this); }
};
// Rule: the register is saved at OFFSET from BASE_REGISTER. BASE_REGISTER
// may be CallFrameInfo::Handler::kCFARegister.
class CallFrameInfo::OffsetRule: public CallFrameInfo::Rule {
public:
OffsetRule(int base_register, long offset)
: base_register_(base_register), offset_(offset) { }
~OffsetRule() { }
bool Handle(Handler *handler, uint64 address, int reg) const {
return handler->OffsetRule(address, reg, base_register_, offset_);
}
bool operator==(const Rule &rhs) const {
// dynamic_cast is allowed by the Google C++ Style Guide, if the use has
// been carefully considered; cheap RTTI-like workarounds are forbidden.
const OffsetRule *our_rhs = dynamic_cast<const OffsetRule *>(&rhs);
return (our_rhs &&
base_register_ == our_rhs->base_register_ &&
offset_ == our_rhs->offset_);
}
Rule *Copy() const { return new OffsetRule(*this); }
// We don't actually need SetBaseRegister or SetOffset here, since they
// are only ever applied to CFA rules, for DW_CFA_def_cfa_offset, and it
// doesn't make sense to use OffsetRule for computing the CFA: it
// computes the address at which a register is saved, not a value.
private:
int base_register_;
long offset_;
};
// Rule: the value the register had in the caller is the value of
// BASE_REGISTER plus offset. BASE_REGISTER may be
// CallFrameInfo::Handler::kCFARegister.
class CallFrameInfo::ValOffsetRule: public CallFrameInfo::Rule {
public:
ValOffsetRule(int base_register, long offset)
: base_register_(base_register), offset_(offset) { }
~ValOffsetRule() { }
bool Handle(Handler *handler, uint64 address, int reg) const {
return handler->ValOffsetRule(address, reg, base_register_, offset_);
}
bool operator==(const Rule &rhs) const {
// dynamic_cast is allowed by the Google C++ Style Guide, if the use has
// been carefully considered; cheap RTTI-like workarounds are forbidden.
const ValOffsetRule *our_rhs = dynamic_cast<const ValOffsetRule *>(&rhs);
return (our_rhs &&
base_register_ == our_rhs->base_register_ &&
offset_ == our_rhs->offset_);
}
Rule *Copy() const { return new ValOffsetRule(*this); }
void SetBaseRegister(unsigned reg) { base_register_ = reg; }
void SetOffset(long long offset) { offset_ = offset; }
private:
int base_register_;
long offset_;
};
// Rule: the register has been saved in another register REGISTER_NUMBER_.
class CallFrameInfo::RegisterRule: public CallFrameInfo::Rule {
public:
explicit RegisterRule(int register_number)
: register_number_(register_number) { }
~RegisterRule() { }
bool Handle(Handler *handler, uint64 address, int reg) const {
return handler->RegisterRule(address, reg, register_number_);
}
bool operator==(const Rule &rhs) const {
// dynamic_cast is allowed by the Google C++ Style Guide, if the use has
// been carefully considered; cheap RTTI-like workarounds are forbidden.
const RegisterRule *our_rhs = dynamic_cast<const RegisterRule *>(&rhs);
return (our_rhs && register_number_ == our_rhs->register_number_);
}
Rule *Copy() const { return new RegisterRule(*this); }
private:
int register_number_;
};
// Rule: EXPRESSION evaluates to the address at which the register is saved.
class CallFrameInfo::ExpressionRule: public CallFrameInfo::Rule {
public:
explicit ExpressionRule(const string &expression)
: expression_(expression) { }
~ExpressionRule() { }
bool Handle(Handler *handler, uint64 address, int reg) const {
return handler->ExpressionRule(address, reg, expression_);
}
bool operator==(const Rule &rhs) const {
// dynamic_cast is allowed by the Google C++ Style Guide, if the use has
// been carefully considered; cheap RTTI-like workarounds are forbidden.
const ExpressionRule *our_rhs = dynamic_cast<const ExpressionRule *>(&rhs);
return (our_rhs && expression_ == our_rhs->expression_);
}
Rule *Copy() const { return new ExpressionRule(*this); }
private:
string expression_;
};
// Rule: EXPRESSION evaluates to the address at which the register is saved.
class CallFrameInfo::ValExpressionRule: public CallFrameInfo::Rule {
public:
explicit ValExpressionRule(const string &expression)
: expression_(expression) { }
~ValExpressionRule() { }
bool Handle(Handler *handler, uint64 address, int reg) const {
return handler->ValExpressionRule(address, reg, expression_);
}
bool operator==(const Rule &rhs) const {
// dynamic_cast is allowed by the Google C++ Style Guide, if the use has
// been carefully considered; cheap RTTI-like workarounds are forbidden.
const ValExpressionRule *our_rhs =
dynamic_cast<const ValExpressionRule *>(&rhs);
return (our_rhs && expression_ == our_rhs->expression_);
}
Rule *Copy() const { return new ValExpressionRule(*this); }
private:
string expression_;
};
// A map from register numbers to rules.
class CallFrameInfo::RuleMap {
public:
RuleMap() : cfa_rule_(NULL) { }
RuleMap(const RuleMap &rhs) : cfa_rule_(NULL) { *this = rhs; }
~RuleMap() { Clear(); }
RuleMap &operator=(const RuleMap &rhs);
// Set the rule for computing the CFA to RULE. Take ownership of RULE.
void SetCFARule(Rule *rule) { delete cfa_rule_; cfa_rule_ = rule; }
// Return the current CFA rule. Unlike RegisterRule, this RuleMap retains
// ownership of the rule. We use this for DW_CFA_def_cfa_offset and
// DW_CFA_def_cfa_register, and for detecting references to the CFA before
// a rule for it has been established.
Rule *CFARule() const { return cfa_rule_; }
// Return the rule for REG, or NULL if there is none. The caller takes
// ownership of the result.
Rule *RegisterRule(int reg) const;
// Set the rule for computing REG to RULE. Take ownership of RULE.
void SetRegisterRule(int reg, Rule *rule);
// Make all the appropriate calls to HANDLER as if we were changing from
// this RuleMap to NEW_RULES at ADDRESS. We use this to implement
// DW_CFA_restore_state, where lots of rules can change simultaneously.
// Return true if all handlers returned true; otherwise, return false.
bool HandleTransitionTo(Handler *handler, uint64 address,
const RuleMap &new_rules) const;
private:
// A map from register numbers to Rules.
typedef std::map<int, Rule *> RuleByNumber;
// Remove all register rules and clear cfa_rule_.
void Clear();
// The rule for computing the canonical frame address. This RuleMap owns
// this rule.
Rule *cfa_rule_;
// A map from register numbers to postfix expressions to recover
// their values. This RuleMap owns the Rules the map refers to.
RuleByNumber registers_;
};
CallFrameInfo::RuleMap &CallFrameInfo::RuleMap::operator=(const RuleMap &rhs) {
Clear();
// Since each map owns the rules it refers to, assignment must copy them.
if (rhs.cfa_rule_) cfa_rule_ = rhs.cfa_rule_->Copy();
for (RuleByNumber::const_iterator it = rhs.registers_.begin();
it != rhs.registers_.end(); it++)
registers_[it->first] = it->second->Copy();
return *this;
}
CallFrameInfo::Rule *CallFrameInfo::RuleMap::RegisterRule(int reg) const {
assert(reg != Handler::kCFARegister);
RuleByNumber::const_iterator it = registers_.find(reg);
if (it != registers_.end())
return it->second->Copy();
else
return NULL;
}
void CallFrameInfo::RuleMap::SetRegisterRule(int reg, Rule *rule) {
assert(reg != Handler::kCFARegister);
assert(rule);
Rule **slot = ®isters_[reg];
delete *slot;
*slot = rule;
}
bool CallFrameInfo::RuleMap::HandleTransitionTo(
Handler *handler,
uint64 address,
const RuleMap &new_rules) const {
// Transition from cfa_rule_ to new_rules.cfa_rule_.
if (cfa_rule_ && new_rules.cfa_rule_) {
if (*cfa_rule_ != *new_rules.cfa_rule_ &&
!new_rules.cfa_rule_->Handle(handler, address,
Handler::kCFARegister))
return false;
} else if (cfa_rule_) {
// this RuleMap has a CFA rule but new_rules doesn't.
// CallFrameInfo::Handler has no way to handle this --- and shouldn't;
// it's garbage input. The instruction interpreter should have
// detected this and warned, so take no action here.
} else if (new_rules.cfa_rule_) {
// This shouldn't be possible: NEW_RULES is some prior state, and
// there's no way to remove entries.
assert(0);
} else {
// Both CFA rules are empty. No action needed.
}
// Traverse the two maps in order by register number, and report
// whatever differences we find.
RuleByNumber::const_iterator old_it = registers_.begin();
RuleByNumber::const_iterator new_it = new_rules.registers_.begin();
while (old_it != registers_.end() && new_it != new_rules.registers_.end()) {
if (old_it->first < new_it->first) {
// This RuleMap has an entry for old_it->first, but NEW_RULES
// doesn't.
//
// This isn't really the right thing to do, but since CFI generally
// only mentions callee-saves registers, and GCC's convention for
// callee-saves registers is that they are unchanged, it's a good
// approximation.
if (!handler->SameValueRule(address, old_it->first))
return false;
old_it++;
} else if (old_it->first > new_it->first) {
// NEW_RULES has entry for new_it->first, but this RuleMap
// doesn't. This shouldn't be possible: NEW_RULES is some prior
// state, and there's no way to remove entries.
assert(0);
} else {
// Both maps have an entry for this register. Report the new
// rule if it is different.
if (*old_it->second != *new_it->second &&
!new_it->second->Handle(handler, address, new_it->first))
return false;
new_it++, old_it++;
}
}
// Finish off entries from this RuleMap with no counterparts in new_rules.
while (old_it != registers_.end()) {
if (!handler->SameValueRule(address, old_it->first))
return false;
old_it++;
}
// Since we only make transitions from a rule set to some previously
// saved rule set, and we can only add rules to the map, NEW_RULES
// must have fewer rules than *this.
assert(new_it == new_rules.registers_.end());
return true;
}
// Remove all register rules and clear cfa_rule_.
void CallFrameInfo::RuleMap::Clear() {
delete cfa_rule_;
cfa_rule_ = NULL;
for (RuleByNumber::iterator it = registers_.begin();
it != registers_.end(); it++)
delete it->second;
registers_.clear();
}
// The state of the call frame information interpreter as it processes
// instructions from a CIE and FDE.
class CallFrameInfo::State {
public:
// Create a call frame information interpreter state with the given
// reporter, reader, handler, and initial call frame info address.
State(ByteReader *reader, Handler *handler, Reporter *reporter,
uint64 address)
: reader_(reader), handler_(handler), reporter_(reporter),
address_(address), entry_(NULL), cursor_(NULL) { }
// Interpret instructions from CIE, save the resulting rule set for
// DW_CFA_restore instructions, and return true. On error, report
// the problem to reporter_ and return false.
bool InterpretCIE(const CIE &cie);
// Interpret instructions from FDE, and return true. On error,
// report the problem to reporter_ and return false.
bool InterpretFDE(const FDE &fde);
private:
// The operands of a CFI instruction, for ParseOperands.
struct Operands {
unsigned register_number; // A register number.
uint64 offset; // An offset or address.
long signed_offset; // A signed offset.
string expression; // A DWARF expression.
};
// Parse CFI instruction operands from STATE's instruction stream as
// described by FORMAT. On success, populate OPERANDS with the
// results, and return true. On failure, report the problem and
// return false.
//
// Each character of FORMAT should be one of the following:
//
// 'r' unsigned LEB128 register number (OPERANDS->register_number)
// 'o' unsigned LEB128 offset (OPERANDS->offset)
// 's' signed LEB128 offset (OPERANDS->signed_offset)
// 'a' machine-size address (OPERANDS->offset)
// (If the CIE has a 'z' augmentation string, 'a' uses the
// encoding specified by the 'R' argument.)
// '1' a one-byte offset (OPERANDS->offset)
// '2' a two-byte offset (OPERANDS->offset)
// '4' a four-byte offset (OPERANDS->offset)
// '8' an eight-byte offset (OPERANDS->offset)
// 'e' a DW_FORM_block holding a (OPERANDS->expression)
// DWARF expression
bool ParseOperands(const char *format, Operands *operands);
// Interpret one CFI instruction from STATE's instruction stream, update
// STATE, report any rule changes to handler_, and return true. On
// failure, report the problem and return false.
bool DoInstruction();
// The following Do* member functions are subroutines of DoInstruction,
// factoring out the actual work of operations that have several
// different encodings.
// Set the CFA rule to be the value of BASE_REGISTER plus OFFSET, and
// return true. On failure, report and return false. (Used for
// DW_CFA_def_cfa and DW_CFA_def_cfa_sf.)
bool DoDefCFA(unsigned base_register, long offset);
// Change the offset of the CFA rule to OFFSET, and return true. On
// failure, report and return false. (Subroutine for
// DW_CFA_def_cfa_offset and DW_CFA_def_cfa_offset_sf.)
bool DoDefCFAOffset(long offset);
// Specify that REG can be recovered using RULE, and return true. On
// failure, report and return false.
bool DoRule(unsigned reg, Rule *rule);
// Specify that REG can be found at OFFSET from the CFA, and return true.
// On failure, report and return false. (Subroutine for DW_CFA_offset,
// DW_CFA_offset_extended, and DW_CFA_offset_extended_sf.)
bool DoOffset(unsigned reg, long offset);
// Specify that the caller's value for REG is the CFA plus OFFSET,
// and return true. On failure, report and return false. (Subroutine
// for DW_CFA_val_offset and DW_CFA_val_offset_sf.)
bool DoValOffset(unsigned reg, long offset);
// Restore REG to the rule established in the CIE, and return true. On
// failure, report and return false. (Subroutine for DW_CFA_restore and
// DW_CFA_restore_extended.)
bool DoRestore(unsigned reg);
// Return the section offset of the instruction at cursor. For use
// in error messages.
uint64 CursorOffset() { return entry_->offset + (cursor_ - entry_->start); }
// Report that entry_ is incomplete, and return false. For brevity.
bool ReportIncomplete() {
reporter_->Incomplete(entry_->offset, entry_->kind);
return false;
}
// For reading multi-byte values with the appropriate endianness.
ByteReader *reader_;
// The handler to which we should report the data we find.
Handler *handler_;
// For reporting problems in the info we're parsing.
Reporter *reporter_;
// The code address to which the next instruction in the stream applies.
uint64 address_;
// The entry whose instructions we are currently processing. This is
// first a CIE, and then an FDE.
const Entry *entry_;
// The next instruction to process.
const char *cursor_;
// The current set of rules.
RuleMap rules_;
// The set of rules established by the CIE, used by DW_CFA_restore
// and DW_CFA_restore_extended. We set this after interpreting the
// CIE's instructions.
RuleMap cie_rules_;
// A stack of saved states, for DW_CFA_remember_state and
// DW_CFA_restore_state.
std::stack<RuleMap> saved_rules_;
};
bool CallFrameInfo::State::InterpretCIE(const CIE &cie) {
entry_ = &cie;
cursor_ = entry_->instructions;
while (cursor_ < entry_->end)
if (!DoInstruction())
return false;
// Note the rules established by the CIE, for use by DW_CFA_restore
// and DW_CFA_restore_extended.
cie_rules_ = rules_;
return true;
}
bool CallFrameInfo::State::InterpretFDE(const FDE &fde) {
entry_ = &fde;
cursor_ = entry_->instructions;
while (cursor_ < entry_->end)
if (!DoInstruction())
return false;
return true;
}
bool CallFrameInfo::State::ParseOperands(const char *format,
Operands *operands) {
size_t len;
const char *operand;
for (operand = format; *operand; operand++) {
size_t bytes_left = entry_->end - cursor_;
switch (*operand) {
case 'r':
operands->register_number = reader_->ReadUnsignedLEB128(cursor_, &len);
if (len > bytes_left) return ReportIncomplete();
cursor_ += len;
break;
case 'o':
operands->offset = reader_->ReadUnsignedLEB128(cursor_, &len);
if (len > bytes_left) return ReportIncomplete();
cursor_ += len;
break;
case 's':
operands->signed_offset = reader_->ReadSignedLEB128(cursor_, &len);
if (len > bytes_left) return ReportIncomplete();
cursor_ += len;
break;
case 'a':
operands->offset =
reader_->ReadEncodedPointer(cursor_, entry_->cie->pointer_encoding,
&len);
if (len > bytes_left) return ReportIncomplete();
cursor_ += len;
break;
case '1':
if (1 > bytes_left) return ReportIncomplete();
operands->offset = static_cast<unsigned char>(*cursor_++);
break;
case '2':
if (2 > bytes_left) return ReportIncomplete();
operands->offset = reader_->ReadTwoBytes(cursor_);
cursor_ += 2;
break;
case '4':
if (4 > bytes_left) return ReportIncomplete();
operands->offset = reader_->ReadFourBytes(cursor_);
cursor_ += 4;
break;
case '8':
if (8 > bytes_left) return ReportIncomplete();
operands->offset = reader_->ReadEightBytes(cursor_);
cursor_ += 8;
break;
case 'e': {
size_t expression_length = reader_->ReadUnsignedLEB128(cursor_, &len);
if (len > bytes_left || expression_length > bytes_left - len)
return ReportIncomplete();
cursor_ += len;
operands->expression = string(cursor_, expression_length);
cursor_ += expression_length;
break;
}
default:
assert(0);
}
}
return true;
}
bool CallFrameInfo::State::DoInstruction() {
CIE *cie = entry_->cie;
Operands ops;
// Our entry's kind should have been set by now.
assert(entry_->kind != kUnknown);
// We shouldn't have been invoked unless there were more
// instructions to parse.
assert(cursor_ < entry_->end);
unsigned opcode = *cursor_++;
if ((opcode & 0xc0) != 0) {
switch (opcode & 0xc0) {
// Advance the address.
case DW_CFA_advance_loc: {
size_t code_offset = opcode & 0x3f;
address_ += code_offset * cie->code_alignment_factor;
break;
}
// Find a register at an offset from the CFA.
case DW_CFA_offset:
if (!ParseOperands("o", &ops) ||
!DoOffset(opcode & 0x3f, ops.offset * cie->data_alignment_factor))
return false;
break;
// Restore the rule established for a register by the CIE.
case DW_CFA_restore:
if (!DoRestore(opcode & 0x3f)) return false;
break;
// The 'if' above should have excluded this possibility.
default:
assert(0);
}
// Return here, so the big switch below won't be indented.
return true;
}
switch (opcode) {
// Set the address.
case DW_CFA_set_loc:
if (!ParseOperands("a", &ops)) return false;
address_ = ops.offset;
break;
// Advance the address.
case DW_CFA_advance_loc1:
if (!ParseOperands("1", &ops)) return false;
address_ += ops.offset * cie->code_alignment_factor;
break;
// Advance the address.
case DW_CFA_advance_loc2:
if (!ParseOperands("2", &ops)) return false;
address_ += ops.offset * cie->code_alignment_factor;
break;
// Advance the address.
case DW_CFA_advance_loc4:
if (!ParseOperands("4", &ops)) return false;
address_ += ops.offset * cie->code_alignment_factor;
break;
// Advance the address.
case DW_CFA_MIPS_advance_loc8:
if (!ParseOperands("8", &ops)) return false;
address_ += ops.offset * cie->code_alignment_factor;
break;
// Compute the CFA by adding an offset to a register.
case DW_CFA_def_cfa:
if (!ParseOperands("ro", &ops) ||
!DoDefCFA(ops.register_number, ops.offset))
return false;
break;
// Compute the CFA by adding an offset to a register.
case DW_CFA_def_cfa_sf:
if (!ParseOperands("rs", &ops) ||
!DoDefCFA(ops.register_number,
ops.signed_offset * cie->data_alignment_factor))
return false;
break;
// Change the base register used to compute the CFA.
case DW_CFA_def_cfa_register: {
if (!ParseOperands("r", &ops)) return false;
Rule *cfa_rule = rules_.CFARule();
if (!cfa_rule) {
if (!DoDefCFA(ops.register_number, ops.offset)) {
reporter_->NoCFARule(entry_->offset, entry_->kind, CursorOffset());
return false;
}
} else {
cfa_rule->SetBaseRegister(ops.register_number);
if (!cfa_rule->Handle(handler_, address_,
Handler::kCFARegister))
return false;
}
break;
}
// Change the offset used to compute the CFA.
case DW_CFA_def_cfa_offset:
if (!ParseOperands("o", &ops) ||
!DoDefCFAOffset(ops.offset))
return false;
break;
// Change the offset used to compute the CFA.
case DW_CFA_def_cfa_offset_sf:
if (!ParseOperands("s", &ops) ||
!DoDefCFAOffset(ops.signed_offset * cie->data_alignment_factor))
return false;
break;
// Specify an expression whose value is the CFA.
case DW_CFA_def_cfa_expression: {
if (!ParseOperands("e", &ops))
return false;
Rule *rule = new ValExpressionRule(ops.expression);
rules_.SetCFARule(rule);
if (!rule->Handle(handler_, address_,
Handler::kCFARegister))
return false;
break;
}
// The register's value cannot be recovered.
case DW_CFA_undefined: {
if (!ParseOperands("r", &ops) ||
!DoRule(ops.register_number, new UndefinedRule()))
return false;
break;
}
// The register's value is unchanged from its value in the caller.
case DW_CFA_same_value: {
if (!ParseOperands("r", &ops) ||
!DoRule(ops.register_number, new SameValueRule()))
return false;
break;
}
// Find a register at an offset from the CFA.
case DW_CFA_offset_extended:
if (!ParseOperands("ro", &ops) ||
!DoOffset(ops.register_number,
ops.offset * cie->data_alignment_factor))
return false;
break;
// The register is saved at an offset from the CFA.
case DW_CFA_offset_extended_sf:
if (!ParseOperands("rs", &ops) ||
!DoOffset(ops.register_number,
ops.signed_offset * cie->data_alignment_factor))
return false;
break;
// The register is saved at an offset from the CFA.
case DW_CFA_GNU_negative_offset_extended:
if (!ParseOperands("ro", &ops) ||
!DoOffset(ops.register_number,
-ops.offset * cie->data_alignment_factor))
return false;
break;
// The register's value is the sum of the CFA plus an offset.
case DW_CFA_val_offset:
if (!ParseOperands("ro", &ops) ||
!DoValOffset(ops.register_number,
ops.offset * cie->data_alignment_factor))
return false;
break;
// The register's value is the sum of the CFA plus an offset.
case DW_CFA_val_offset_sf:
if (!ParseOperands("rs", &ops) ||
!DoValOffset(ops.register_number,
ops.signed_offset * cie->data_alignment_factor))
return false;
break;
// The register has been saved in another register.
case DW_CFA_register: {
if (!ParseOperands("ro", &ops) ||
!DoRule(ops.register_number, new RegisterRule(ops.offset)))
return false;
break;
}
// An expression yields the address at which the register is saved.
case DW_CFA_expression: {
if (!ParseOperands("re", &ops) ||
!DoRule(ops.register_number, new ExpressionRule(ops.expression)))
return false;
break;
}
// An expression yields the caller's value for the register.
case DW_CFA_val_expression: {
if (!ParseOperands("re", &ops) ||
!DoRule(ops.register_number, new ValExpressionRule(ops.expression)))
return false;
break;
}
// Restore the rule established for a register by the CIE.
case DW_CFA_restore_extended:
if (!ParseOperands("r", &ops) ||
!DoRestore( ops.register_number))
return false;
break;
// Save the current set of rules on a stack.
case DW_CFA_remember_state:
saved_rules_.push(rules_);
break;
// Pop the current set of rules off the stack.
case DW_CFA_restore_state: {
if (saved_rules_.empty()) {
reporter_->EmptyStateStack(entry_->offset, entry_->kind,
CursorOffset());
return false;
}
const RuleMap &new_rules = saved_rules_.top();
if (rules_.CFARule() && !new_rules.CFARule()) {
reporter_->ClearingCFARule(entry_->offset, entry_->kind,
CursorOffset());
return false;
}
rules_.HandleTransitionTo(handler_, address_, new_rules);
rules_ = new_rules;
saved_rules_.pop();
break;
}
// No operation. (Padding instruction.)
case DW_CFA_nop:
break;
// A SPARC register window save: Registers 8 through 15 (%o0-%o7)
// are saved in registers 24 through 31 (%i0-%i7), and registers
// 16 through 31 (%l0-%l7 and %i0-%i7) are saved at CFA offsets
// (0-15 * the register size). The register numbers must be
// hard-coded. A GNU extension, and not a pretty one.
case DW_CFA_GNU_window_save: {
// Save %o0-%o7 in %i0-%i7.
for (int i = 8; i < 16; i++)
if (!DoRule(i, new RegisterRule(i + 16)))
return false;
// Save %l0-%l7 and %i0-%i7 at the CFA.
for (int i = 16; i < 32; i++)
// Assume that the byte reader's address size is the same as
// the architecture's register size. !@#%*^ hilarious.
if (!DoRule(i, new OffsetRule(Handler::kCFARegister,
(i - 16) * reader_->AddressSize())))
return false;
break;
}
// I'm not sure what this is. GDB doesn't use it for unwinding.
case DW_CFA_GNU_args_size:
if (!ParseOperands("o", &ops)) return false;
break;
// An opcode we don't recognize.
default: {
reporter_->BadInstruction(entry_->offset, entry_->kind, CursorOffset());
return false;
}
}
return true;
}
bool CallFrameInfo::State::DoDefCFA(unsigned base_register, long offset) {
Rule *rule = new ValOffsetRule(base_register, offset);
rules_.SetCFARule(rule);
return rule->Handle(handler_, address_,
Handler::kCFARegister);
}
bool CallFrameInfo::State::DoDefCFAOffset(long offset) {
Rule *cfa_rule = rules_.CFARule();
if (!cfa_rule) {
reporter_->NoCFARule(entry_->offset, entry_->kind, CursorOffset());
return false;
}
cfa_rule->SetOffset(offset);
return cfa_rule->Handle(handler_, address_,
Handler::kCFARegister);
}
bool CallFrameInfo::State::DoRule(unsigned reg, Rule *rule) {
rules_.SetRegisterRule(reg, rule);
return rule->Handle(handler_, address_, reg);
}
bool CallFrameInfo::State::DoOffset(unsigned reg, long offset) {
if (!rules_.CFARule()) {
reporter_->NoCFARule(entry_->offset, entry_->kind, CursorOffset());
return false;
}
return DoRule(reg,
new OffsetRule(Handler::kCFARegister, offset));
}
bool CallFrameInfo::State::DoValOffset(unsigned reg, long offset) {
if (!rules_.CFARule()) {
reporter_->NoCFARule(entry_->offset, entry_->kind, CursorOffset());
return false;
}
return DoRule(reg,
new ValOffsetRule(Handler::kCFARegister, offset));
}
bool CallFrameInfo::State::DoRestore(unsigned reg) {
// DW_CFA_restore and DW_CFA_restore_extended don't make sense in a CIE.
if (entry_->kind == kCIE) {
reporter_->RestoreInCIE(entry_->offset, CursorOffset());
return false;
}
Rule *rule = cie_rules_.RegisterRule(reg);
if (!rule) {
// This isn't really the right thing to do, but since CFI generally
// only mentions callee-saves registers, and GCC's convention for
// callee-saves registers is that they are unchanged, it's a good
// approximation.
rule = new SameValueRule();
}
return DoRule(reg, rule);
}
bool CallFrameInfo::ReadEntryPrologue(const char *cursor, Entry *entry) {
const char *buffer_end = buffer_ + buffer_length_;
// Initialize enough of ENTRY for use in error reporting.
entry->offset = cursor - buffer_;
entry->start = cursor;
entry->kind = kUnknown;
entry->end = NULL;
// Read the initial length. This sets reader_'s offset size.
size_t length_size;
uint64 length = reader_->ReadInitialLength(cursor, &length_size);
if (length_size > size_t(buffer_end - cursor))
return ReportIncomplete(entry);
cursor += length_size;
// In a .eh_frame section, a length of zero marks the end of the series
// of entries.
if (length == 0 && eh_frame_) {
entry->kind = kTerminator;
entry->end = cursor;
return true;
}
// Validate the length.
if (length > size_t(buffer_end - cursor))
return ReportIncomplete(entry);
// The length is the number of bytes after the initial length field;
// we have that position handy at this point, so compute the end
// now. (If we're parsing 64-bit-offset DWARF on a 32-bit machine,
// and the length didn't fit in a size_t, we would have rejected it
// above.)
entry->end = cursor + length;
// Parse the next field: either the offset of a CIE or a CIE id.
size_t offset_size = reader_->OffsetSize();
if (offset_size > size_t(entry->end - cursor)) return ReportIncomplete(entry);
entry->id = reader_->ReadOffset(cursor);
// Don't advance cursor past id field yet; in .eh_frame data we need
// the id's position to compute the section offset of an FDE's CIE.
// Now we can decide what kind of entry this is.
if (eh_frame_) {
// In .eh_frame data, an ID of zero marks the entry as a CIE, and
// anything else is an offset from the id field of the FDE to the start
// of the CIE.
if (entry->id == 0) {
entry->kind = kCIE;
} else {
entry->kind = kFDE;
// Turn the offset from the id into an offset from the buffer's start.
entry->id = (cursor - buffer_) - entry->id;
}
} else {
// In DWARF CFI data, an ID of ~0 (of the appropriate width, given the
// offset size for the entry) marks the entry as a CIE, and anything
// else is the offset of the CIE from the beginning of the section.
if (offset_size == 4)
entry->kind = (entry->id == 0xffffffff) ? kCIE : kFDE;
else {
assert(offset_size == 8);
entry->kind = (entry->id == 0xffffffffffffffffULL) ? kCIE : kFDE;
}
}
// Now advance cursor past the id.
cursor += offset_size;
// The fields specific to this kind of entry start here.
entry->fields = cursor;
entry->cie = NULL;
return true;
}
bool CallFrameInfo::ReadCIEFields(CIE *cie) {
const char *cursor = cie->fields;
size_t len;
assert(cie->kind == kCIE);
// Prepare for early exit.
cie->version = 0;
cie->augmentation.clear();
cie->code_alignment_factor = 0;
cie->data_alignment_factor = 0;
cie->return_address_register = 0;
cie->has_z_augmentation = false;
cie->pointer_encoding = DW_EH_PE_absptr;
cie->instructions = 0;
// Parse the version number.
if (cie->end - cursor < 1)
return ReportIncomplete(cie);
cie->version = reader_->ReadOneByte(cursor);
cursor++;
// If we don't recognize the version, we can't parse any more fields of the
// CIE. For DWARF CFI, we handle versions 1 through 3 (there was never a
// version 2 of CFI data). For .eh_frame, we handle versions 1 and 3 as well;
// the difference between those versions seems to be the same as for
// .debug_frame.
if (cie->version < 1 || cie->version > 3) {
reporter_->UnrecognizedVersion(cie->offset, cie->version);
return false;
}
const char *augmentation_start = cursor;
const void *augmentation_end =
memchr(augmentation_start, '\0', cie->end - augmentation_start);
if (! augmentation_end) return ReportIncomplete(cie);
cursor = static_cast<const char *>(augmentation_end);
cie->augmentation = string(augmentation_start,
cursor - augmentation_start);
// Skip the terminating '\0'.
cursor++;
// Is this CFI augmented?
if (!cie->augmentation.empty()) {
// Is it an augmentation we recognize?
if (cie->augmentation[0] == DW_Z_augmentation_start) {
// Linux C++ ABI 'z' augmentation, used for exception handling data.
cie->has_z_augmentation = true;
} else {
// Not an augmentation we recognize. Augmentations can have arbitrary
// effects on the form of rest of the content, so we have to give up.
reporter_->UnrecognizedAugmentation(cie->offset, cie->augmentation);
return false;
}
}
// Parse the code alignment factor.
cie->code_alignment_factor = reader_->ReadUnsignedLEB128(cursor, &len);
if (size_t(cie->end - cursor) < len) return ReportIncomplete(cie);
cursor += len;
// Parse the data alignment factor.
cie->data_alignment_factor = reader_->ReadSignedLEB128(cursor, &len);
if (size_t(cie->end - cursor) < len) return ReportIncomplete(cie);
cursor += len;
// Parse the return address register. This is a ubyte in version 1, and
// a ULEB128 in version 3.
if (cie->version == 1) {
if (cursor >= cie->end) return ReportIncomplete(cie);
cie->return_address_register = uint8(*cursor++);
} else {
cie->return_address_register = reader_->ReadUnsignedLEB128(cursor, &len);
if (size_t(cie->end - cursor) < len) return ReportIncomplete(cie);
cursor += len;
}
// If we have a 'z' augmentation string, find the augmentation data and
// use the augmentation string to parse it.
if (cie->has_z_augmentation) {
uint64_t data_size = reader_->ReadUnsignedLEB128(cursor, &len);
if (size_t(cie->end - cursor) < len + data_size)
return ReportIncomplete(cie);
cursor += len;
const char *data = cursor;
cursor += data_size;
const char *data_end = cursor;
cie->has_z_lsda = false;
cie->has_z_personality = false;
cie->has_z_signal_frame = false;
// Walk the augmentation string, and extract values from the
// augmentation data as the string directs.
for (size_t i = 1; i < cie->augmentation.size(); i++) {
switch (cie->augmentation[i]) {
case DW_Z_has_LSDA:
// The CIE's augmentation data holds the language-specific data
// area pointer's encoding, and the FDE's augmentation data holds
// the pointer itself.
cie->has_z_lsda = true;
// Fetch the LSDA encoding from the augmentation data.
if (data >= data_end) return ReportIncomplete(cie);
cie->lsda_encoding = DwarfPointerEncoding(*data++);
if (!reader_->ValidEncoding(cie->lsda_encoding)) {
reporter_->InvalidPointerEncoding(cie->offset, cie->lsda_encoding);
return false;
}
// Don't check if the encoding is usable here --- we haven't
// read the FDE's fields yet, so we're not prepared for
// DW_EH_PE_funcrel, although that's a fine encoding for the
// LSDA to use, since it appears in the FDE.
break;
case DW_Z_has_personality_routine:
// The CIE's augmentation data holds the personality routine
// pointer's encoding, followed by the pointer itself.
cie->has_z_personality = true;
// Fetch the personality routine pointer's encoding from the
// augmentation data.
if (data >= data_end) return ReportIncomplete(cie);
cie->personality_encoding = DwarfPointerEncoding(*data++);
if (!reader_->ValidEncoding(cie->personality_encoding)) {
reporter_->InvalidPointerEncoding(cie->offset,
cie->personality_encoding);
return false;
}
if (!reader_->UsableEncoding(cie->personality_encoding)) {
reporter_->UnusablePointerEncoding(cie->offset,
cie->personality_encoding);
return false;
}
// Fetch the personality routine's pointer itself from the data.
cie->personality_address =
reader_->ReadEncodedPointer(data, cie->personality_encoding,
&len);
if (len > size_t(data_end - data))
return ReportIncomplete(cie);
data += len;
break;
case DW_Z_has_FDE_address_encoding:
// The CIE's augmentation data holds the pointer encoding to use
// for addresses in the FDE.
if (data >= data_end) return ReportIncomplete(cie);
cie->pointer_encoding = DwarfPointerEncoding(*data++);
if (!reader_->ValidEncoding(cie->pointer_encoding)) {
reporter_->InvalidPointerEncoding(cie->offset,
cie->pointer_encoding);
return false;
}
if (!reader_->UsableEncoding(cie->pointer_encoding)) {
reporter_->UnusablePointerEncoding(cie->offset,
cie->pointer_encoding);
return false;
}
break;
case DW_Z_is_signal_trampoline:
// Frames using this CIE are signal delivery frames.
cie->has_z_signal_frame = true;
break;
default:
// An augmentation we don't recognize.
reporter_->UnrecognizedAugmentation(cie->offset, cie->augmentation);
return false;
}
}
}
// The CIE's instructions start here.
cie->instructions = cursor;
return true;
}
bool CallFrameInfo::ReadFDEFields(FDE *fde) {
const char *cursor = fde->fields;
size_t size;
fde->address = reader_->ReadEncodedPointer(cursor, fde->cie->pointer_encoding,
&size);
if (size > size_t(fde->end - cursor))
return ReportIncomplete(fde);
cursor += size;
reader_->SetFunctionBase(fde->address);
// For the length, we strip off the upper nybble of the encoding used for
// the starting address.
DwarfPointerEncoding length_encoding =
DwarfPointerEncoding(fde->cie->pointer_encoding & 0x0f);
fde->size = reader_->ReadEncodedPointer(cursor, length_encoding, &size);
if (size > size_t(fde->end - cursor))
return ReportIncomplete(fde);
cursor += size;
// If the CIE has a 'z' augmentation string, then augmentation data
// appears here.
if (fde->cie->has_z_augmentation) {
uint64_t data_size = reader_->ReadUnsignedLEB128(cursor, &size);
if (size_t(fde->end - cursor) < size + data_size)
return ReportIncomplete(fde);
cursor += size;
// In the abstract, we should walk the augmentation string, and extract
// items from the FDE's augmentation data as we encounter augmentation
// string characters that specify their presence: the ordering of items
// in the augmentation string determines the arrangement of values in
// the augmentation data.
//
// In practice, there's only ever one value in FDE augmentation data
// that we support --- the LSDA pointer --- and we have to bail if we
// see any unrecognized augmentation string characters. So if there is
// anything here at all, we know what it is, and where it starts.
if (fde->cie->has_z_lsda) {
// Check whether the LSDA's pointer encoding is usable now: only once
// we've parsed the FDE's starting address do we call reader_->
// SetFunctionBase, so that the DW_EH_PE_funcrel encoding becomes
// usable.
if (!reader_->UsableEncoding(fde->cie->lsda_encoding)) {
reporter_->UnusablePointerEncoding(fde->cie->offset,
fde->cie->lsda_encoding);
return false;
}
fde->lsda_address =
reader_->ReadEncodedPointer(cursor, fde->cie->lsda_encoding, &size);
if (size > data_size)
return ReportIncomplete(fde);
// Ideally, we would also complain here if there were unconsumed
// augmentation data.
}
cursor += data_size;
}
// The FDE's instructions start after those.
fde->instructions = cursor;
return true;
}
bool CallFrameInfo::Start() {
const char *buffer_end = buffer_ + buffer_length_;
const char *cursor;
bool all_ok = true;
const char *entry_end;
bool ok;
// Traverse all the entries in buffer_, skipping CIEs and offering
// FDEs to the handler.
for (cursor = buffer_; cursor < buffer_end;
cursor = entry_end, all_ok = all_ok && ok) {
FDE fde;
// Make it easy to skip this entry with 'continue': assume that
// things are not okay until we've checked all the data, and
// prepare the address of the next entry.
ok = false;
// Read the entry's prologue.
if (!ReadEntryPrologue(cursor, &fde)) {
if (!fde.end) {
// If we couldn't even figure out this entry's extent, then we
// must stop processing entries altogether.
all_ok = false;
break;
}
entry_end = fde.end;
continue;
}
// The next iteration picks up after this entry.
entry_end = fde.end;
// Did we see an .eh_frame terminating mark?
if (fde.kind == kTerminator) {
// If there appears to be more data left in the section after the
// terminating mark, warn the user. But this is just a warning;
// we leave all_ok true.
if (fde.end < buffer_end) reporter_->EarlyEHTerminator(fde.offset);
break;
}
// In this loop, we skip CIEs. We only parse them fully when we
// parse an FDE that refers to them. This limits our memory
// consumption (beyond the buffer itself) to that needed to
// process the largest single entry.
if (fde.kind != kFDE) {
ok = true;
continue;
}
// Validate the CIE pointer.
if (fde.id > buffer_length_) {
reporter_->CIEPointerOutOfRange(fde.offset, fde.id);
continue;
}
CIE cie;
// Parse this FDE's CIE header.
if (!ReadEntryPrologue(buffer_ + fde.id, &cie))
continue;
// This had better be an actual CIE.
if (cie.kind != kCIE) {
reporter_->BadCIEId(fde.offset, fde.id);
continue;
}
if (!ReadCIEFields(&cie))
continue;
// We now have the values that govern both the CIE and the FDE.
cie.cie = &cie;
fde.cie = &cie;
// Parse the FDE's header.
if (!ReadFDEFields(&fde))
continue;
// Call Entry to ask the consumer if they're interested.
if (!handler_->Entry(fde.offset, fde.address, fde.size,
cie.version, cie.augmentation,
cie.return_address_register)) {
// The handler isn't interested in this entry. That's not an error.
ok = true;
continue;
}
if (cie.has_z_augmentation) {
// Report the personality routine address, if we have one.
if (cie.has_z_personality) {
if (!handler_
->PersonalityRoutine(cie.personality_address,
IsIndirectEncoding(cie.personality_encoding)))
continue;
}
// Report the language-specific data area address, if we have one.
if (cie.has_z_lsda) {
if (!handler_
->LanguageSpecificDataArea(fde.lsda_address,
IsIndirectEncoding(cie.lsda_encoding)))
continue;
}
// If this is a signal-handling frame, report that.
if (cie.has_z_signal_frame) {
if (!handler_->SignalHandler())
continue;
}
}
// Interpret the CIE's instructions, and then the FDE's instructions.
State state(reader_, handler_, reporter_, fde.address);
ok = state.InterpretCIE(cie) && state.InterpretFDE(fde);
// Tell the ByteReader that the function start address from the
// FDE header is no longer valid.
reader_->ClearFunctionBase();
// Report the end of the entry.
handler_->End();
}
return all_ok;
}
const char *CallFrameInfo::KindName(EntryKind kind) {
if (kind == CallFrameInfo::kUnknown)
return "entry";
else if (kind == CallFrameInfo::kCIE)
return "common information entry";
else if (kind == CallFrameInfo::kFDE)
return "frame description entry";
else {
assert (kind == CallFrameInfo::kTerminator);
return ".eh_frame sequence terminator";
}
}
bool CallFrameInfo::ReportIncomplete(Entry *entry) {
reporter_->Incomplete(entry->offset, entry->kind);
return false;
}
void CallFrameInfo::Reporter::Incomplete(uint64 offset,
CallFrameInfo::EntryKind kind) {
fprintf(stderr,
"%s: CFI %s at offset 0x%llx in '%s': entry ends early\n",
filename_.c_str(), CallFrameInfo::KindName(kind), offset,
section_.c_str());
}
void CallFrameInfo::Reporter::EarlyEHTerminator(uint64 offset) {
fprintf(stderr,
"%s: CFI at offset 0x%llx in '%s': saw end-of-data marker"
" before end of section contents\n",
filename_.c_str(), offset, section_.c_str());
}
void CallFrameInfo::Reporter::CIEPointerOutOfRange(uint64 offset,
uint64 cie_offset) {
fprintf(stderr,
"%s: CFI frame description entry at offset 0x%llx in '%s':"
" CIE pointer is out of range: 0x%llx\n",
filename_.c_str(), offset, section_.c_str(), cie_offset);
}
void CallFrameInfo::Reporter::BadCIEId(uint64 offset, uint64 cie_offset) {
fprintf(stderr,
"%s: CFI frame description entry at offset 0x%llx in '%s':"
" CIE pointer does not point to a CIE: 0x%llx\n",
filename_.c_str(), offset, section_.c_str(), cie_offset);
}
void CallFrameInfo::Reporter::UnrecognizedVersion(uint64 offset, int version) {
fprintf(stderr,
"%s: CFI frame description entry at offset 0x%llx in '%s':"
" CIE specifies unrecognized version: %d\n",
filename_.c_str(), offset, section_.c_str(), version);
}
void CallFrameInfo::Reporter::UnrecognizedAugmentation(uint64 offset,
const string &aug) {
fprintf(stderr,
"%s: CFI frame description entry at offset 0x%llx in '%s':"
" CIE specifies unrecognized augmentation: '%s'\n",
filename_.c_str(), offset, section_.c_str(), aug.c_str());
}
void CallFrameInfo::Reporter::InvalidPointerEncoding(uint64 offset,
uint8 encoding) {
fprintf(stderr,
"%s: CFI common information entry at offset 0x%llx in '%s':"
" 'z' augmentation specifies invalid pointer encoding: 0x%02x\n",
filename_.c_str(), offset, section_.c_str(), encoding);
}
void CallFrameInfo::Reporter::UnusablePointerEncoding(uint64 offset,
uint8 encoding) {
fprintf(stderr,
"%s: CFI common information entry at offset 0x%llx in '%s':"
" 'z' augmentation specifies a pointer encoding for which"
" we have no base address: 0x%02x\n",
filename_.c_str(), offset, section_.c_str(), encoding);
}
void CallFrameInfo::Reporter::RestoreInCIE(uint64 offset, uint64 insn_offset) {
fprintf(stderr,
"%s: CFI common information entry at offset 0x%llx in '%s':"
" the DW_CFA_restore instruction at offset 0x%llx"
" cannot be used in a common information entry\n",
filename_.c_str(), offset, section_.c_str(), insn_offset);
}
void CallFrameInfo::Reporter::BadInstruction(uint64 offset,
CallFrameInfo::EntryKind kind,
uint64 insn_offset) {
fprintf(stderr,
"%s: CFI %s at offset 0x%llx in section '%s':"
" the instruction at offset 0x%llx is unrecognized\n",
filename_.c_str(), CallFrameInfo::KindName(kind),
offset, section_.c_str(), insn_offset);
}
void CallFrameInfo::Reporter::NoCFARule(uint64 offset,
CallFrameInfo::EntryKind kind,
uint64 insn_offset) {
fprintf(stderr,
"%s: CFI %s at offset 0x%llx in section '%s':"
" the instruction at offset 0x%llx assumes that a CFA rule has"
" been set, but none has been set\n",
filename_.c_str(), CallFrameInfo::KindName(kind), offset,
section_.c_str(), insn_offset);
}
void CallFrameInfo::Reporter::EmptyStateStack(uint64 offset,
CallFrameInfo::EntryKind kind,
uint64 insn_offset) {
fprintf(stderr,
"%s: CFI %s at offset 0x%llx in section '%s':"
" the DW_CFA_restore_state instruction at offset 0x%llx"
" should pop a saved state from the stack, but the stack is empty\n",
filename_.c_str(), CallFrameInfo::KindName(kind), offset,
section_.c_str(), insn_offset);
}
void CallFrameInfo::Reporter::ClearingCFARule(uint64 offset,
CallFrameInfo::EntryKind kind,
uint64 insn_offset) {
fprintf(stderr,
"%s: CFI %s at offset 0x%llx in section '%s':"
" the DW_CFA_restore_state instruction at offset 0x%llx"
" would clear the CFA rule in effect\n",
filename_.c_str(), CallFrameInfo::KindName(kind), offset,
section_.c_str(), insn_offset);
}
} // namespace dwarf2reader