/***************************************************************************
* _ _ ____ _
* Project ___| | | | _ \| |
* / __| | | | |_) | |
* | (__| |_| | _ <| |___
* \___|\___/|_| \_\_____|
*
* Copyright (C) 1998 - 2016, Daniel Stenberg, <daniel@haxx.se>, et al.
*
* This software is licensed as described in the file COPYING, which
* you should have received as part of this distribution. The terms
* are also available at https://curl.haxx.se/docs/copyright.html.
*
* You may opt to use, copy, modify, merge, publish, distribute and/or sell
* copies of the Software, and permit persons to whom the Software is
* furnished to do so, under the terms of the COPYING file.
*
* This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
* KIND, either express or implied.
*
***************************************************************************/
/* !checksrc! disable ASSIGNWITHINCONDITION all */
/* Now include the curl_setup.h file from libcurl's private libdir (the source
version, but that might include "curl_config.h" from the build dir so we
need both of them in the include path), so that we get good in-depth
knowledge about the system we're building this on */
#define CURL_NO_OLDIES
#include "curl_setup.h"
#include <curl/curl.h>
#ifdef HAVE_SYS_SELECT_H
/* since so many tests use select(), we can just as well include it here */
#include <sys/select.h>
#endif
#ifdef TPF
# include "select.h"
#endif
#include "curl_printf.h"
#define test_setopt(A,B,C) \
if((res = curl_easy_setopt((A), (B), (C))) != CURLE_OK) goto test_cleanup
#define test_multi_setopt(A,B,C) \
if((res = curl_multi_setopt((A), (B), (C))) != CURLE_OK) goto test_cleanup
extern char *libtest_arg2; /* set by first.c to the argv[2] or NULL */
extern char *libtest_arg3; /* set by first.c to the argv[3] or NULL */
/* argc and argv as passed in to the main() function */
extern int test_argc;
extern char **test_argv;
extern struct timeval tv_test_start; /* for test timing */
extern int select_wrapper(int nfds, fd_set *rd, fd_set *wr, fd_set *exc,
struct timeval *tv);
extern void wait_ms(int ms); /* wait this many milliseconds */
extern int test(char *URL); /* the actual test function provided by each
individual libXXX.c file */
extern char *hexdump(const unsigned char *buffer, size_t len);
#ifdef UNITTESTS
extern int unitfail;
#endif
/*
** TEST_ERR_* values must be greater than CURL_LAST CURLcode in order
** to avoid confusion with any CURLcode or CURLMcode. These TEST_ERR_*
** codes are returned to signal test specific situations and should
** not get mixed with CURLcode or CURLMcode values.
**
** For portability reasons TEST_ERR_* values should be less than 127.
*/
#define TEST_ERR_MAJOR_BAD 126
#define TEST_ERR_RUNS_FOREVER 125
#define TEST_ERR_EASY_INIT 124
#define TEST_ERR_MULTI_INIT 123
#define TEST_ERR_NUM_HANDLES 122
#define TEST_ERR_SELECT 121
#define TEST_ERR_SUCCESS 120
#define TEST_ERR_FAILURE 119
#define TEST_ERR_USAGE 118
#define TEST_ERR_FOPEN 117
#define TEST_ERR_FSTAT 116
#define TEST_ERR_BAD_TIMEOUT 115
/*
** Macros for test source code readability/maintainability.
**
** All of the following macros require that an int data type 'res' variable
** exists in scope where macro is used, and that it has been initialized to
** zero before the macro is used.
**
** exe_* and chk_* macros are helper macros not intended to be used from
** outside of this header file. Arguments 'Y' and 'Z' of these represent
** source code file and line number, while Arguments 'A', 'B', etc, are
** the arguments used to actually call a libcurl function.
**
** All easy_* and multi_* macros call a libcurl function and evaluate if
** the function has succeeded or failed. When the function succeeds 'res'
** variable is not set nor cleared and program continues normal flow. On
** the other hand if function fails 'res' variable is set and a jump to
** label 'test_cleanup' is performed.
**
** Every easy_* and multi_* macros have a res_easy_* and res_multi_* macro
** counterpart that operates in the same way with the exception that no
** jump takes place in case of failure. res_easy_* and res_multi_* macros
** should be immediately followed by checking if 'res' variable has been
** set.
**
** 'res' variable when set will hold a CURLcode, CURLMcode, or any of the
** TEST_ERR_* values defined above. It is advisable to return this value
** as test result.
*/
/* ---------------------------------------------------------------- */
#define exe_easy_init(A,Y,Z) do { \
if(((A) = curl_easy_init()) == NULL) { \
fprintf(stderr, "%s:%d curl_easy_init() failed\n", (Y), (Z)); \
res = TEST_ERR_EASY_INIT; \
} \
} WHILE_FALSE
#define res_easy_init(A) \
exe_easy_init((A), (__FILE__), (__LINE__))
#define chk_easy_init(A,Y,Z) do { \
exe_easy_init((A), (Y), (Z)); \
if(res) \
goto test_cleanup; \
} WHILE_FALSE
#define easy_init(A) \
chk_easy_init((A), (__FILE__), (__LINE__))
/* ---------------------------------------------------------------- */
#define exe_multi_init(A,Y,Z) do { \
if(((A) = curl_multi_init()) == NULL) { \
fprintf(stderr, "%s:%d curl_multi_init() failed\n", (Y), (Z)); \
res = TEST_ERR_MULTI_INIT; \
} \
} WHILE_FALSE
#define res_multi_init(A) \
exe_multi_init((A), (__FILE__), (__LINE__))
#define chk_multi_init(A,Y,Z) do { \
exe_multi_init((A), (Y), (Z)); \
if(res) \
goto test_cleanup; \
} WHILE_FALSE
#define multi_init(A) \
chk_multi_init((A), (__FILE__), (__LINE__))
/* ---------------------------------------------------------------- */
#define exe_easy_setopt(A,B,C,Y,Z) do { \
CURLcode ec; \
if((ec = curl_easy_setopt((A), (B), (C))) != CURLE_OK) { \
fprintf(stderr, "%s:%d curl_easy_setopt() failed, " \
"with code %d (%s)\n", \
(Y), (Z), (int)ec, curl_easy_strerror(ec)); \
res = (int)ec; \
} \
} WHILE_FALSE
#define res_easy_setopt(A, B, C) \
exe_easy_setopt((A), (B), (C), (__FILE__), (__LINE__))
#define chk_easy_setopt(A, B, C, Y, Z) do { \
exe_easy_setopt((A), (B), (C), (Y), (Z)); \
if(res) \
goto test_cleanup; \
} WHILE_FALSE
#define easy_setopt(A, B, C) \
chk_easy_setopt((A), (B), (C), (__FILE__), (__LINE__))
/* ---------------------------------------------------------------- */
#define exe_multi_setopt(A, B, C, Y, Z) do { \
CURLMcode ec; \
if((ec = curl_multi_setopt((A), (B), (C))) != CURLM_OK) { \
fprintf(stderr, "%s:%d curl_multi_setopt() failed, " \
"with code %d (%s)\n", \
(Y), (Z), (int)ec, curl_multi_strerror(ec)); \
res = (int)ec; \
} \
} WHILE_FALSE
#define res_multi_setopt(A,B,C) \
exe_multi_setopt((A), (B), (C), (__FILE__), (__LINE__))
#define chk_multi_setopt(A,B,C,Y,Z) do { \
exe_multi_setopt((A), (B), (C), (Y), (Z)); \
if(res) \
goto test_cleanup; \
} WHILE_FALSE
#define multi_setopt(A,B,C) \
chk_multi_setopt((A), (B), (C), (__FILE__), (__LINE__))
/* ---------------------------------------------------------------- */
#define exe_multi_add_handle(A,B,Y,Z) do { \
CURLMcode ec; \
if((ec = curl_multi_add_handle((A), (B))) != CURLM_OK) { \
fprintf(stderr, "%s:%d curl_multi_add_handle() failed, " \
"with code %d (%s)\n", \
(Y), (Z), (int)ec, curl_multi_strerror(ec)); \
res = (int)ec; \
} \
} WHILE_FALSE
#define res_multi_add_handle(A, B) \
exe_multi_add_handle((A), (B), (__FILE__), (__LINE__))
#define chk_multi_add_handle(A, B, Y, Z) do { \
exe_multi_add_handle((A), (B), (Y), (Z)); \
if(res) \
goto test_cleanup; \
} WHILE_FALSE
#define multi_add_handle(A, B) \
chk_multi_add_handle((A), (B), (__FILE__), (__LINE__))
/* ---------------------------------------------------------------- */
#define exe_multi_remove_handle(A,B,Y,Z) do { \
CURLMcode ec; \
if((ec = curl_multi_remove_handle((A), (B))) != CURLM_OK) { \
fprintf(stderr, "%s:%d curl_multi_remove_handle() failed, " \
"with code %d (%s)\n", \
(Y), (Z), (int)ec, curl_multi_strerror(ec)); \
res = (int)ec; \
} \
} WHILE_FALSE
#define res_multi_remove_handle(A, B) \
exe_multi_remove_handle((A), (B), (__FILE__), (__LINE__))
#define chk_multi_remove_handle(A, B, Y, Z) do { \
exe_multi_remove_handle((A), (B), (Y), (Z)); \
if(res) \
goto test_cleanup; \
} WHILE_FALSE
#define multi_remove_handle(A, B) \
chk_multi_remove_handle((A), (B), (__FILE__), (__LINE__))
/* ---------------------------------------------------------------- */
#define exe_multi_perform(A,B,Y,Z) do { \
CURLMcode ec; \
if((ec = curl_multi_perform((A), (B))) != CURLM_OK) { \
fprintf(stderr, "%s:%d curl_multi_perform() failed, " \
"with code %d (%s)\n", \
(Y), (Z), (int)ec, curl_multi_strerror(ec)); \
res = (int)ec; \
} \
else if(*((B)) < 0) { \
fprintf(stderr, "%s:%d curl_multi_perform() succeeded, " \
"but returned invalid running_handles value (%d)\n", \
(Y), (Z), (int)*((B))); \
res = TEST_ERR_NUM_HANDLES; \
} \
} WHILE_FALSE
#define res_multi_perform(A, B) \
exe_multi_perform((A), (B), (__FILE__), (__LINE__))
#define chk_multi_perform(A, B, Y, Z) do { \
exe_multi_perform((A), (B), (Y), (Z)); \
if(res) \
goto test_cleanup; \
} WHILE_FALSE
#define multi_perform(A,B) \
chk_multi_perform((A), (B), (__FILE__), (__LINE__))
/* ---------------------------------------------------------------- */
#define exe_multi_fdset(A, B, C, D, E, Y, Z) do { \
CURLMcode ec; \
if((ec = curl_multi_fdset((A), (B), (C), (D), (E))) != CURLM_OK) { \
fprintf(stderr, "%s:%d curl_multi_fdset() failed, " \
"with code %d (%s)\n", \
(Y), (Z), (int)ec, curl_multi_strerror(ec)); \
res = (int)ec; \
} \
else if(*((E)) < -1) { \
fprintf(stderr, "%s:%d curl_multi_fdset() succeeded, " \
"but returned invalid max_fd value (%d)\n", \
(Y), (Z), (int)*((E))); \
res = TEST_ERR_NUM_HANDLES; \
} \
} WHILE_FALSE
#define res_multi_fdset(A, B, C, D, E) \
exe_multi_fdset((A), (B), (C), (D), (E), (__FILE__), (__LINE__))
#define chk_multi_fdset(A, B, C, D, E, Y, Z) do { \
exe_multi_fdset((A), (B), (C), (D), (E), (Y), (Z)); \
if(res) \
goto test_cleanup; \
} WHILE_FALSE
#define multi_fdset(A, B, C, D, E) \
chk_multi_fdset((A), (B), (C), (D), (E), (__FILE__), (__LINE__))
/* ---------------------------------------------------------------- */
#define exe_multi_timeout(A,B,Y,Z) do { \
CURLMcode ec; \
if((ec = curl_multi_timeout((A), (B))) != CURLM_OK) { \
fprintf(stderr, "%s:%d curl_multi_timeout() failed, " \
"with code %d (%s)\n", \
(Y), (Z), (int)ec, curl_multi_strerror(ec)); \
res = (int)ec; \
} \
else if(*((B)) < -1L) { \
fprintf(stderr, "%s:%d curl_multi_timeout() succeeded, " \
"but returned invalid timeout value (%ld)\n", \
(Y), (Z), (long)*((B))); \
res = TEST_ERR_BAD_TIMEOUT; \
} \
} WHILE_FALSE
#define res_multi_timeout(A, B) \
exe_multi_timeout((A), (B), (__FILE__), (__LINE__))
#define chk_multi_timeout(A, B, Y, Z) do { \
exe_multi_timeout((A), (B), (Y), (Z)); \
if(res) \
goto test_cleanup; \
} WHILE_FALSE
#define multi_timeout(A, B) \
chk_multi_timeout((A), (B), (__FILE__), (__LINE__))
/* ---------------------------------------------------------------- */
#define exe_select_test(A, B, C, D, E, Y, Z) do { \
int ec; \
if(select_wrapper((A), (B), (C), (D), (E)) == -1) { \
ec = SOCKERRNO; \
fprintf(stderr, "%s:%d select() failed, with " \
"errno %d (%s)\n", \
(Y), (Z), ec, strerror(ec)); \
res = TEST_ERR_SELECT; \
} \
} WHILE_FALSE
#define res_select_test(A, B, C, D, E) \
exe_select_test((A), (B), (C), (D), (E), (__FILE__), (__LINE__))
#define chk_select_test(A, B, C, D, E, Y, Z) do { \
exe_select_test((A), (B), (C), (D), (E), (Y), (Z)); \
if(res) \
goto test_cleanup; \
} WHILE_FALSE
#define select_test(A, B, C, D, E) \
chk_select_test((A), (B), (C), (D), (E), (__FILE__), (__LINE__))
/* ---------------------------------------------------------------- */
#define start_test_timing() do { \
tv_test_start = tutil_tvnow(); \
} WHILE_FALSE
#define exe_test_timedout(Y,Z) do { \
if(tutil_tvdiff(tutil_tvnow(), tv_test_start) > TEST_HANG_TIMEOUT) { \
fprintf(stderr, "%s:%d ABORTING TEST, since it seems " \
"that it would have run forever.\n", (Y), (Z)); \
res = TEST_ERR_RUNS_FOREVER; \
} \
} WHILE_FALSE
#define res_test_timedout() \
exe_test_timedout((__FILE__), (__LINE__))
#define chk_test_timedout(Y, Z) do { \
exe_test_timedout(Y, Z); \
if(res) \
goto test_cleanup; \
} WHILE_FALSE
#define abort_on_test_timeout() \
chk_test_timedout((__FILE__), (__LINE__))
/* ---------------------------------------------------------------- */
#define exe_global_init(A,Y,Z) do { \
CURLcode ec; \
if((ec = curl_global_init((A))) != CURLE_OK) { \
fprintf(stderr, "%s:%d curl_global_init() failed, " \
"with code %d (%s)\n", \
(Y), (Z), (int)ec, curl_easy_strerror(ec)); \
res = (int)ec; \
} \
} WHILE_FALSE
#define res_global_init(A) \
exe_global_init((A), (__FILE__), (__LINE__))
#define chk_global_init(A, Y, Z) do { \
exe_global_init((A), (Y), (Z)); \
if(res) \
return res; \
} WHILE_FALSE
/* global_init() is different than other macros. In case of
failure it 'return's instead of going to 'test_cleanup'. */
#define global_init(A) \
chk_global_init((A), (__FILE__), (__LINE__))
/* ---------------------------------------------------------------- */