/** @file
I2C PEI Lib Instance.
Copyright (c) 1999- 2015, Intel Corporation. All rights reserved.<BR>
This program and the accompanying materials
are licensed and made available under the terms and conditions of the BSD License
which accompanies this distribution. The full text of the license may be found at
http://opensource.org/licenses/bsd-license.php
THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
**/
#include "I2CDelayPei.h"
#include "I2CIoLibPei.h"
#include "I2CAccess.h"
#include "I2CLibPei.h"
#include <PlatformBaseAddresses.h>
#include <Library/DebugLib.h>
#include <Library/BaseMemoryLib.h>
#include <Library/PeiServicesTablePointerLib.h>
#include <Library/HobLib.h>
#include <PchRegs/PchRegsPcu.h>
#include <PchRegs/PchRegsLpss.h>
#define LPSS_PCI_DEVICE_NUMBER 8
#define R_PCH_LPIO_I2C_MEM_RESETS 0x804 // Software Reset
#define B_PCH_LPIO_I2C_MEM_RESETS_FUNC BIT1 // Function Clock Domain Reset
#define B_PCH_LPIO_I2C_MEM_RESETS_APB BIT0 // APB Domain Reset
#define R_PCH_LPSS_I2C_MEM_PCP 0x800 // Private Clock Parameters
#define PEI_TEPM_LPSS_DMA_BAR 0xFE900000
#define PEI_TEPM_LPSS_I2C0_BAR 0xFE910000
#define PCI_CONFIG_SPACE_SIZE 0x10000
EFI_GUID mI2CPeiInitGuid = {
0x96DED71A, 0xB9E7, 0x4EAD, 0x96, 0x2C, 0x01, 0x69, 0x3C, 0xED, 0x2A, 0x64
};
UINT16 I2CGPIO[]= {
//
// 19.1.6 I2C0
// I2C0_SDA-OD-O - write 0x2003CC81 to IOBASE + 0x0210
// I2C0_SCL-OD-O - write 0x2003CC81 to IOBASE + 0x0200
//
0x0210,
0x0200,
//
// 19.1.7 I2C1
// I2C1_SDA-OD-O/I - write 0x2003CC81 to IOBASE + 0x01F0
// I2C1_SCL-OD-O/I - write 0x2003CC81 to IOBASE + 0x01E0
//
0x01F0,
0x01E0,
//
// 19.1.8 I2C2
// I2C2_SDA-OD-O/I - write 0x2003CC81 to IOBASE + 0x01D0
// I2C2_SCL-OD-O/I - write 0x2003CC81 to IOBASE + 0x01B0
//
0x01D0,
0x01B0,
//
// 19.1.9 I2C3
// I2C3_SDA-OD-O/I - write 0x2003CC81 to IOBASE + 0x0190
// I2C3_SCL-OD-O/I - write 0x2003CC81 to IOBASE + 0x01C0
//
0x0190,
0x01C0,
//
// 19.1.10 I2C4
// I2C4_SDA-OD-O/I - write 0x2003CC81 to IOBASE + 0x01A0
// I2C4_SCL-OD-O/I - write 0x2003CC81 to IOBASE + 0x0170
//
0x01A0,
0x0170,
//
// 19.1.11 I2C5
// I2C5_SDA-OD-O/I - write 0x2003CC81 to IOBASE + 0x0150
// I2C5_SCL-OD-O/I - write 0x2003CC81 to IOBASE + 0x0140
//
0x0150,
0x0140,
//
// 19.1.12 I2C6
// I2C6_SDA-OD-O/I - write 0x2003CC81 to IOBASE + 0x0180
// I2C6_SCL-OD-O/I - write 0x2003CC81 to IOBASE + 0x0160
//
0x0180,
0x0160
};
/**
Constructor of this library.
@param VOID
@return EFI_SUCCESS
**/
EFI_STATUS
EFIAPI
IntelI2CPeiLibConstructor (
IN EFI_PEI_FILE_HANDLE FileHandle,
IN CONST EFI_PEI_SERVICES **PeiServices
)
{
UINTN Index;
for (Index = 0; Index < sizeof(I2CGPIO)/sizeof(UINT16); Index ++) {
I2CLibPeiMmioWrite32(IO_BASE_ADDRESS+I2CGPIO[Index], 0x2003CC81);
}
return EFI_SUCCESS;
}
/**
Programe all I2C controllers on LPSS.
I2C0 is function 1 of LPSS. I2C1 is function 2 of LPSS, etc..
@param VOID
@return EFI_SUCCESS
**/
EFI_STATUS
ProgramPciLpssI2C (
VOID
)
{
UINT32 PmcBase;
UINT32 DevID;
UINTN PciMmBase=0;
UINTN Index;
UINTN Bar0;
UINTN Bar1;
DEBUG ((EFI_D_INFO, "Pei ProgramPciLpssI2C() Start\n"));
//
// Set the VLV Function Disable Register to ZERO
//
PmcBase = I2CLibPeiMmioRead32(PciD31F0RegBase + R_PCH_LPC_PMC_BASE) & B_PCH_LPC_PMC_BASE_BAR;
if(I2CLibPeiMmioRead32(PmcBase + R_PCH_PMC_FUNC_DIS)&
(B_PCH_PMC_FUNC_DIS_LPSS2_FUNC1 | B_PCH_PMC_FUNC_DIS_LPSS2_FUNC2
| B_PCH_PMC_FUNC_DIS_LPSS2_FUNC3 | B_PCH_PMC_FUNC_DIS_LPSS2_FUNC4 | B_PCH_PMC_FUNC_DIS_LPSS2_FUNC5
| B_PCH_PMC_FUNC_DIS_LPSS2_FUNC6 | B_PCH_PMC_FUNC_DIS_LPSS2_FUNC7)) {
I2CLibPeiMmioWrite32(
PmcBase+R_PCH_PMC_FUNC_DIS,
I2CLibPeiMmioRead32(PmcBase + R_PCH_PMC_FUNC_DIS)& \
~(B_PCH_PMC_FUNC_DIS_LPSS2_FUNC1 | B_PCH_PMC_FUNC_DIS_LPSS2_FUNC2 \
| B_PCH_PMC_FUNC_DIS_LPSS2_FUNC3 | B_PCH_PMC_FUNC_DIS_LPSS2_FUNC4 \
| B_PCH_PMC_FUNC_DIS_LPSS2_FUNC5 | B_PCH_PMC_FUNC_DIS_LPSS2_FUNC6|B_PCH_PMC_FUNC_DIS_LPSS2_FUNC7)
);
DEBUG ((EFI_D_INFO, "ProgramPciLpssI2C() enable all I2C controllers\n"));
}
for(Index = 0; Index < LPSS_PCI_DEVICE_NUMBER; Index ++) {
PciMmBase = MmPciAddress (
0,
DEFAULT_PCI_BUS_NUMBER_PCH,
PCI_DEVICE_NUMBER_PCH_LPSS_I2C,
Index,
0
);
DevID = I2CLibPeiMmioRead32(PciMmBase);
Bar0 = PEI_TEPM_LPSS_DMA_BAR + (Index * PCI_CONFIG_SPACE_SIZE);
Bar1 = Bar0 + 0x8000;
DEBUG((EFI_D_ERROR, "Program Pci Lpss I2C Device Function=%x DevID=%08x\n", Index, DevID));
//
// Check if device present
//
if (DevID != 0xFFFFFFFF) {
if(!(I2CLibPeiMmioRead32 (PciMmBase + R_PCH_LPSS_I2C_STSCMD) & B_PCH_LPSS_I2C_STSCMD_MSE)) {
//
// Program BAR 0
//
I2CLibPeiMmioWrite32((UINTN) (PciMmBase + R_PCH_LPSS_I2C_BAR), (UINT32)(Bar0 & B_PCH_LPSS_I2C_BAR_BA));
DEBUG ((EFI_D_ERROR, "I2CBaseAddress1 = 0x%x \n",I2CLibPeiMmioRead32 (PciMmBase+R_PCH_LPSS_I2C_BAR)));
//
// Program BAR 1
//
I2CLibPeiMmioWrite32 ((UINTN)(PciMmBase + R_PCH_LPSS_I2C_BAR1), (UINT32)(Bar1 & B_PCH_LPSS_I2C_BAR1_BA));
DEBUG ((EFI_D_ERROR, "I2CBaseAddress1 = 0x%x \n",I2CLibPeiMmioRead32(PciMmBase+R_PCH_LPSS_I2C_BAR1)));
//
// Bus Master Enable & Memory Space Enable
//
I2CLibPeiMmioWrite32((UINTN) (PciMmBase + R_PCH_LPSS_I2C_STSCMD), (UINT32)(B_PCH_LPSS_I2C_STSCMD_BME | B_PCH_LPSS_I2C_STSCMD_MSE));
}
//
// Release Resets
//
I2CLibPeiMmioWrite32 (Bar0 + R_PCH_LPIO_I2C_MEM_RESETS, (B_PCH_LPIO_I2C_MEM_RESETS_FUNC | B_PCH_LPIO_I2C_MEM_RESETS_APB));
//
// Activate Clocks
//
I2CLibPeiMmioWrite32 (Bar0 + R_PCH_LPSS_I2C_MEM_PCP, 0x80020003);//No use for A0
DEBUG ((EFI_D_INFO, "ProgramPciLpssI2C() Programmed()\n"));
}
}
DEBUG ((EFI_D_INFO, "Pei ProgramPciLpssI2C() End\n"));
return EFI_SUCCESS;
}
/**
Disable I2C Bus.
@param I2cControllerIndex Index of I2C controller.
@return EFI_SUCCESS
**/
EFI_STATUS
I2cDisable (
IN UINT8 I2cControllerIndex
)
{
UINTN I2CBaseAddress;
UINT32 NumTries = 10000; // 0.1 seconds
I2CBaseAddress = (UINT32) PEI_TEPM_LPSS_I2C0_BAR + I2cControllerIndex * PCI_CONFIG_SPACE_SIZE;
I2CLibPeiMmioWrite16 (I2CBaseAddress + R_IC_ENABLE, 0);
while (0 != ( I2CLibPeiMmioRead16 (I2CBaseAddress + R_IC_ENABLE_STATUS ) & 1)) {
MicroSecondDelay (10);
NumTries --;
if(0 == NumTries) return EFI_NOT_READY;
}
return EFI_SUCCESS;
}
/**
Enable I2C Bus.
@param I2cControllerIndex Index of I2C controller.
@return EFI_SUCCESS
**/
EFI_STATUS
I2cEnable (
IN UINT8 I2cControllerIndex
)
{
UINTN I2CBaseAddress;
UINT32 NumTries = 10000; // 0.1 seconds
I2CBaseAddress = (UINT32) PEI_TEPM_LPSS_I2C0_BAR+ I2cControllerIndex * PCI_CONFIG_SPACE_SIZE;
I2CLibPeiMmioWrite16 (I2CBaseAddress + R_IC_ENABLE, 1);
while (0 == ( I2CLibPeiMmioRead16 ( I2CBaseAddress + R_IC_ENABLE_STATUS ) & 1)) {
MicroSecondDelay (10);
NumTries --;
if(0 == NumTries) return EFI_NOT_READY;
}
return EFI_SUCCESS;
}
/**
Set the I2C controller bus clock frequency.
@param[in] This Address of the library's I2C context structure
@param[in] PlatformData Address of the platform configuration data
@param[in] BusClockHertz New I2C bus clock frequency in Hertz
@retval RETURN_SUCCESS The bus frequency was set successfully.
@retval RETURN_UNSUPPORTED The controller does not support this frequency.
**/
EFI_STATUS
I2cBusFrequencySet (
IN UINTN I2CBaseAddress,
IN UINTN BusClockHertz,
IN UINT16 *I2cMode
)
{
DEBUG((EFI_D_INFO,"InputFreq BusClockHertz: %d\r\n",BusClockHertz));
*I2cMode = B_IC_RESTART_EN | B_IC_SLAVE_DISABLE | B_MASTER_MODE;
//
// Set the 100 KHz clock divider
//
// From Table 10 of the I2C specification
//
// High: 4.00 uS
// Low: 4.70 uS
//
I2CLibPeiMmioWrite16 ( I2CBaseAddress + R_IC_SS_SCL_HCNT, (UINT16)0x214 );
I2CLibPeiMmioWrite16 ( I2CBaseAddress + R_IC_SS_SCL_LCNT, (UINT16)0x272 );
//
// Set the 400 KHz clock divider
//
// From Table 10 of the I2C specification
//
// High: 0.60 uS
// Low: 1.30 uS
//
I2CLibPeiMmioWrite16 ( I2CBaseAddress + R_IC_FS_SCL_HCNT, (UINT16)0x50 );
I2CLibPeiMmioWrite16 ( I2CBaseAddress + R_IC_FS_SCL_LCNT, (UINT16)0xAD );
switch ( BusClockHertz ) {
case 100 * 1000:
I2CLibPeiMmioWrite32 ( I2CBaseAddress + R_IC_SDA_HOLD, (UINT16)0x40);//100K
*I2cMode |= V_SPEED_STANDARD;
break;
case 400 * 1000:
I2CLibPeiMmioWrite32 ( I2CBaseAddress + R_IC_SDA_HOLD, (UINT16)0x32);//400K
*I2cMode |= V_SPEED_FAST;
break;
default:
I2CLibPeiMmioWrite32 ( I2CBaseAddress + R_IC_SDA_HOLD, (UINT16)0x09);//3.4M
*I2cMode |= V_SPEED_HIGH;
}
return EFI_SUCCESS;
}
/**
Initializes the host controller to execute I2C commands.
@param I2cControllerIndex Index of I2C controller in LPSS device. 0 represents I2C0, which is PCI function 1 of LPSS device.
@return EFI_SUCCESS Opcode initialization on the I2C host controller completed.
@return EFI_DEVICE_ERROR Device error, operation failed.
**/
EFI_STATUS
I2CInit (
UINT8 I2cControllerIndex,
UINT16 SlaveAddress
)
{
EFI_STATUS Status;
UINT32 NumTries = 0;
UINTN I2CBaseAddress;
UINT16 I2cMode;
UINTN PciMmBase=0;
PciMmBase = MmPciAddress (
0,
DEFAULT_PCI_BUS_NUMBER_PCH,
PCI_DEVICE_NUMBER_PCH_LPSS_I2C,
(I2cControllerIndex + 1),
0
);
I2CBaseAddress = I2CLibPeiMmioRead32 (PciMmBase+R_PCH_LPSS_I2C_BAR);
//
// Verify the parameters
//
if (1023 < SlaveAddress ) {
Status = EFI_INVALID_PARAMETER;
DEBUG((EFI_D_INFO,"I2cStartRequest Exit with Status %r\r\n", Status));
return Status;
}
if(I2CBaseAddress == (PEI_TEPM_LPSS_I2C0_BAR + I2cControllerIndex * PCI_CONFIG_SPACE_SIZE)) {
return EFI_SUCCESS;
}
ProgramPciLpssI2C();
I2CBaseAddress = (UINT32) (PEI_TEPM_LPSS_I2C0_BAR + I2cControllerIndex * PCI_CONFIG_SPACE_SIZE);
DEBUG ((EFI_D_ERROR, "I2CBaseAddress = 0x%x \n",I2CBaseAddress));
NumTries = 10000; // 1 seconds
while ((1 == ( I2CLibPeiMmioRead32 ( I2CBaseAddress + R_IC_STATUS) & STAT_MST_ACTIVITY ))) {
MicroSecondDelay(10);
NumTries --;
if(0 == NumTries)
return EFI_DEVICE_ERROR;
}
Status = I2cDisable (I2cControllerIndex);
DEBUG((EFI_D_INFO, "I2cDisable Status = %r\r\n", Status));
I2cBusFrequencySet(I2CBaseAddress, 400 * 1000, &I2cMode);//Set I2cMode
I2CLibPeiMmioWrite16(I2CBaseAddress + R_IC_INTR_MASK, 0x0);
if (0x7F < SlaveAddress) {
SlaveAddress = (SlaveAddress & 0x3ff ) | IC_TAR_10BITADDR_MASTER;
}
I2CLibPeiMmioWrite16 (I2CBaseAddress + R_IC_TAR, (UINT16) SlaveAddress );
I2CLibPeiMmioWrite16 (I2CBaseAddress + R_IC_RX_TL, 0);
I2CLibPeiMmioWrite16 (I2CBaseAddress + R_IC_TX_TL, 0 );
I2CLibPeiMmioWrite16 (I2CBaseAddress + R_IC_CON, I2cMode);
Status = I2cEnable(I2cControllerIndex);
DEBUG((EFI_D_INFO, "I2cEnable Status = %r\r\n", Status));
I2CLibPeiMmioRead16 ( I2CBaseAddress + R_IC_CLR_TX_ABRT );
return EFI_SUCCESS;
}
/**
Reads a Byte from I2C Device.
@param I2cControllerIndex I2C Bus no to which the I2C device has been connected
@param SlaveAddress Device Address from which the byte value has to be read
@param Offset Offset from which the data has to be read
@param *Byte Address to which the value read has to be stored
@return EFI_SUCCESS If the byte value has been successfully read
@return EFI_DEVICE_ERROR Operation Failed, Device Error
**/
EFI_STATUS ByteReadI2CBasic(
IN UINT8 I2cControllerIndex,
IN UINT8 SlaveAddress,
IN UINTN ReadBytes,
OUT UINT8 *ReadBuffer,
IN UINT8 Start,
IN UINT8 End
)
{
EFI_STATUS Status;
UINT32 I2cStatus;
UINT16 ReceiveData;
UINT8 *ReceiveDataEnd;
UINT8 *ReceiveRequest;
UINT16 RawIntrStat;
UINTN I2CBaseAddress;
I2CBaseAddress = (UINT32)(PEI_TEPM_LPSS_I2C0_BAR + I2cControllerIndex * PCI_CONFIG_SPACE_SIZE);
Status = EFI_SUCCESS;
I2CInit(I2cControllerIndex, SlaveAddress);
ReceiveDataEnd = &ReadBuffer [ReadBytes];
if(ReadBytes) {
ReceiveRequest = ReadBuffer;
DEBUG((EFI_D_INFO,"Read: ---------------%d bytes to RX\r\n",ReceiveDataEnd - ReceiveRequest));
while ((ReceiveDataEnd > ReceiveRequest) || (ReceiveDataEnd > ReadBuffer)) {
//
// Check for NACK
//
RawIntrStat = I2CLibPeiMmioRead16 (I2CBaseAddress + R_IC_RawIntrStat );
if ( 0 != (RawIntrStat & I2C_INTR_TX_ABRT )) {
I2CLibPeiMmioRead16 ( I2CBaseAddress + R_IC_CLR_TX_ABRT );
Status = RETURN_DEVICE_ERROR;
DEBUG((EFI_D_INFO,"TX ABRT ,%d bytes hasn't been transferred\r\n",ReceiveDataEnd - ReceiveRequest));
break;
}
//
// Determine if another byte was received
//
I2cStatus = I2CLibPeiMmioRead16 ( I2CBaseAddress + R_IC_STATUS );
if ( 0 != ( I2cStatus & STAT_RFNE )) {
ReceiveData = I2CLibPeiMmioRead16 ( I2CBaseAddress + R_IC_DATA_CMD );
*ReadBuffer++ = (UINT8)ReceiveData;
DEBUG((EFI_D_INFO,"MmioRead32 ,1 byte 0x:%x is received\r\n",ReceiveData));
}
if(ReceiveDataEnd==ReceiveRequest) {
//
// Waiting the last request to get data and make (ReceiveDataEnd > ReadBuffer) =TRUE.
//
continue;
}
//
// Wait until a read request will fit
//
if ( 0 == ( I2cStatus & STAT_TFNF )) {
MicroSecondDelay ( 10 );
continue;
}
//
// Issue the next read request
//
if(End && Start ) {
I2CLibPeiMmioWrite16 ( I2CBaseAddress + R_IC_DATA_CMD, B_READ_CMD|B_CMD_RESTART|B_CMD_STOP);
} else if (!End && Start ) {
I2CLibPeiMmioWrite16 ( I2CBaseAddress + R_IC_DATA_CMD, B_READ_CMD|B_CMD_RESTART);
} else if (End && !Start ) {
I2CLibPeiMmioWrite16 ( I2CBaseAddress + R_IC_DATA_CMD, B_READ_CMD|B_CMD_STOP);
} else if (!End && !Start ) {
I2CLibPeiMmioWrite16 ( I2CBaseAddress + R_IC_DATA_CMD, B_READ_CMD);
}
ReceiveRequest += 1;
}
}
return Status;
}
/**
Writes a Byte to I2C Device.
@param I2cControllerIndex I2C Bus no to which the I2C device has been connected
@param SlaveAddress Device Address from which the byte value has to be written
@param Offset Offset from which the data has to be read
@param *Byte Address to which the value written is stored
@return EFI_SUCCESS IF the byte value has been successfully written
@return EFI_DEVICE_ERROR Operation Failed, Device Error
**/
EFI_STATUS
ByteWriteI2CBasic(
IN UINT8 I2cControllerIndex,
IN UINT8 SlaveAddress,
IN UINTN WriteBytes,
IN UINT8 *WriteBuffer,
IN UINT8 Start,
IN UINT8 End
)
{
EFI_STATUS Status;
UINT32 I2cStatus;
UINT8 *TransmitEnd;
UINT16 RawIntrStat;
UINTN I2CBaseAddress;
I2CBaseAddress = (UINT32)PEI_TEPM_LPSS_I2C0_BAR+ I2cControllerIndex * PCI_CONFIG_SPACE_SIZE;
Status = EFI_SUCCESS;
I2CInit(I2cControllerIndex, SlaveAddress);
TransmitEnd = &WriteBuffer [WriteBytes];
if( WriteBytes ) {
DEBUG((EFI_D_INFO,"Write: --------------%d bytes to TX\r\n", TransmitEnd - WriteBuffer));
while ( TransmitEnd > WriteBuffer) {
I2cStatus = I2CLibPeiMmioRead16 (I2CBaseAddress + R_IC_STATUS);
RawIntrStat = I2CLibPeiMmioRead16 (I2CBaseAddress + R_IC_RawIntrStat);
if ( 0 != (RawIntrStat & I2C_INTR_TX_ABRT)) {
I2CLibPeiMmioRead16 (I2CBaseAddress + R_IC_CLR_TX_ABRT);
Status = RETURN_DEVICE_ERROR;
DEBUG((EFI_D_ERROR,"TX ABRT TransmitEnd:0x%x WriteBuffer:0x%x\r\n", TransmitEnd, WriteBuffer));
break;
}
if (0 == ( I2cStatus & STAT_TFNF)) {
continue;
}
if(End && Start) {
I2CLibPeiMmioWrite16 (I2CBaseAddress + R_IC_DATA_CMD, (*WriteBuffer++) | B_CMD_RESTART | B_CMD_STOP);
} else if (!End && Start ) {
I2CLibPeiMmioWrite16 (I2CBaseAddress + R_IC_DATA_CMD, (*WriteBuffer++) | B_CMD_RESTART);
} else if (End && !Start ) {
I2CLibPeiMmioWrite16 (I2CBaseAddress + R_IC_DATA_CMD, (*WriteBuffer++) | B_CMD_STOP);
} else if (!End && !Start ) {
I2CLibPeiMmioWrite16 (I2CBaseAddress + R_IC_DATA_CMD, (*WriteBuffer++));
}
// Add a small delay to work around some odd behavior being seen. Without this delay bytes get dropped.
MicroSecondDelay ( FIFO_WRITE_DELAY );
}
}
if(EFI_ERROR(Status)) {
DEBUG((EFI_D_INFO,"I2cStartRequest Exit with Status %r\r\n",Status));
}
return Status;
}
/**
Reads a Byte from I2C Device.
@param I2cControllerIndex I2C Bus no to which the I2C device has been connected
@param SlaveAddress Device Address from which the byte value has to be read
@param Offset Offset from which the data has to be read
@param ReadBytes Number of bytes to be read
@param *ReadBuffer Address to which the value read has to be stored
@return EFI_SUCCESS IF the byte value has been successfully read
@return EFI_DEVICE_ERROR Operation Failed, Device Error
**/
EFI_STATUS
ByteReadI2C(
IN UINT8 I2cControllerIndex,
IN UINT8 SlaveAddress,
IN UINT8 Offset,
IN UINTN ReadBytes,
OUT UINT8 *ReadBuffer
)
{
EFI_STATUS Status;
DEBUG ((EFI_D_ERROR, "ByteReadI2C:---offset:0x%x\n",Offset));
Status = ByteWriteI2CBasic(I2cControllerIndex, SlaveAddress, 1, &Offset,TRUE,FALSE);
Status = ByteReadI2CBasic(I2cControllerIndex, SlaveAddress, ReadBytes, ReadBuffer, TRUE, TRUE);
return Status;
}
/**
Writes a Byte to I2C Device.
@param I2cControllerIndex I2C Bus no to which the I2C device has been connected
@param SlaveAddress Device Address from which the byte value has to be written
@param Offset Offset from which the data has to be written
@param WriteBytes Number of bytes to be written
@param *Byte Address to which the value written is stored
@return EFI_SUCCESS IF the byte value has been successfully read
@return EFI_DEVICE_ERROR Operation Failed, Device Error
**/
EFI_STATUS ByteWriteI2C(
IN UINT8 I2cControllerIndex,
IN UINT8 SlaveAddress,
IN UINT8 Offset,
IN UINTN WriteBytes,
IN UINT8 *WriteBuffer
)
{
EFI_STATUS Status;
DEBUG ((EFI_D_ERROR, "ByteWriteI2C:---offset/bytes/buf:0x%x,0x%x,0x%x,0x%x\n",Offset,WriteBytes,WriteBuffer,*WriteBuffer));
Status = ByteWriteI2CBasic(I2cControllerIndex, SlaveAddress, 1, &Offset, TRUE, FALSE);
Status = ByteWriteI2CBasic(I2cControllerIndex, SlaveAddress, WriteBytes, WriteBuffer, FALSE, TRUE);
return Status;
}