/** @file
PlatformHelperLib function prototype definitions.
Copyright (c) 2013 - 2016 Intel Corporation.
This program and the accompanying materials
are licensed and made available under the terms and conditions of the BSD License
which accompanies this distribution. The full text of the license may be found at
http://opensource.org/licenses/bsd-license.php
THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
**/
#ifndef __PLATFORM_HELPER_LIB_H__
#define __PLATFORM_HELPER_LIB_H__
#include "Platform.h"
//
// Function prototypes for routines exported by this library.
//
/**
Find pointer to RAW data in Firmware volume file.
@param FvNameGuid Firmware volume to search. If == NULL search all.
@param FileNameGuid Firmware volume file to search for.
@param SectionData Pointer to RAW data section of found file.
@param SectionDataSize Pointer to UNITN to get size of RAW data.
@retval EFI_SUCCESS Raw Data found.
@retval EFI_INVALID_PARAMETER FileNameGuid == NULL.
@retval EFI_NOT_FOUND Firmware volume file not found.
@retval EFI_UNSUPPORTED Unsupported in current enviroment (PEI or DXE).
**/
EFI_STATUS
EFIAPI
PlatformFindFvFileRawDataSection (
IN CONST EFI_GUID *FvNameGuid OPTIONAL,
IN CONST EFI_GUID *FileNameGuid,
OUT VOID **SectionData,
OUT UINTN *SectionDataSize
);
/**
Find free spi protect register and write to it to protect a flash region.
@param DirectValue Value to directly write to register.
if DirectValue == 0 the use Base & Length below.
@param BaseAddress Base address of region in Flash Memory Map.
@param Length Length of region to protect.
@retval EFI_SUCCESS Free spi protect register found & written.
@retval EFI_NOT_FOUND Free Spi protect register not found.
@retval EFI_DEVICE_ERROR Unable to write to spi protect register.
**/
EFI_STATUS
EFIAPI
PlatformWriteFirstFreeSpiProtect (
IN CONST UINT32 DirectValue,
IN CONST UINT32 BaseAddress,
IN CONST UINT32 Length
);
/**
Lock legacy SPI static configuration information.
Function will assert if unable to lock config.
**/
VOID
EFIAPI
PlatformFlashLockConfig (
VOID
);
/**
Lock regions and config of SPI flash given the policy for this platform.
Function will assert if unable to lock regions or config.
@param PreBootPolicy If TRUE do Pre Boot Flash Lock Policy.
**/
VOID
EFIAPI
PlatformFlashLockPolicy (
IN CONST BOOLEAN PreBootPolicy
);
/** Check if System booted with recovery Boot Stage1 image.
@retval TRUE If system booted with recovery Boot Stage1 image.
@retval FALSE If system booted with normal stage1 image.
**/
BOOLEAN
EFIAPI
PlatformIsBootWithRecoveryStage1 (
VOID
);
/**
Clear SPI Protect registers.
@retval EFI_SUCESS SPI protect registers cleared.
@retval EFI_ACCESS_DENIED Unable to clear SPI protect registers.
**/
EFI_STATUS
EFIAPI
PlatformClearSpiProtect (
VOID
);
/**
Determine if an SPI address range is protected.
@param SpiBaseAddress Base of SPI range.
@param Length Length of SPI range.
@retval TRUE Range is protected.
@retval FALSE Range is not protected.
**/
BOOLEAN
EFIAPI
PlatformIsSpiRangeProtected (
IN CONST UINT32 SpiBaseAddress,
IN CONST UINT32 Length
);
/**
Set Legacy GPIO Level
@param LevelRegOffset GPIO level register Offset from GPIO Base Address.
@param GpioNum GPIO bit to change.
@param HighLevel If TRUE set GPIO High else Set GPIO low.
**/
VOID
EFIAPI
PlatformLegacyGpioSetLevel (
IN CONST UINT32 LevelRegOffset,
IN CONST UINT32 GpioNum,
IN CONST BOOLEAN HighLevel
);
/**
Get Legacy GPIO Level
@param LevelRegOffset GPIO level register Offset from GPIO Base Address.
@param GpioNum GPIO bit to check.
@retval TRUE If bit is SET.
@retval FALSE If bit is CLEAR.
**/
BOOLEAN
EFIAPI
PlatformLegacyGpioGetLevel (
IN CONST UINT32 LevelRegOffset,
IN CONST UINT32 GpioNum
);
/**
Set the direction of Pcal9555 IO Expander GPIO pin.
@param Pcal9555SlaveAddr I2c Slave address of Pcal9555 Io Expander.
@param GpioNum Gpio direction to configure - values 0-7 for Port0
and 8-15 for Port1.
@param CfgAsInput If TRUE set pin direction as input else set as output.
**/
VOID
EFIAPI
PlatformPcal9555GpioSetDir (
IN CONST UINT32 Pcal9555SlaveAddr,
IN CONST UINT32 GpioNum,
IN CONST BOOLEAN CfgAsInput
);
/**
Set the level of Pcal9555 IO Expander GPIO high or low.
@param Pcal9555SlaveAddr I2c Slave address of Pcal9555 Io Expander.
@param GpioNum Gpio to change values 0-7 for Port0 and 8-15
for Port1.
@param HighLevel If TRUE set pin high else set pin low.
**/
VOID
EFIAPI
PlatformPcal9555GpioSetLevel (
IN CONST UINT32 Pcal9555SlaveAddr,
IN CONST UINT32 GpioNum,
IN CONST BOOLEAN HighLevel
);
/**
Enable pull-up/pull-down resistors of Pcal9555 GPIOs.
@param Pcal9555SlaveAddr I2c Slave address of Pcal9555 Io Expander.
@param GpioNum Gpio to change values 0-7 for Port0 and 8-15
for Port1.
**/
VOID
EFIAPI
PlatformPcal9555GpioEnablePull (
IN CONST UINT32 Pcal9555SlaveAddr,
IN CONST UINT32 GpioNum
);
/**
Disable pull-up/pull-down resistors of Pcal9555 GPIOs.
@param Pcal9555SlaveAddr I2c Slave address of Pcal9555 Io Expander.
@param GpioNum Gpio to change values 0-7 for Port0 and 8-15
for Port1.
**/
VOID
EFIAPI
PlatformPcal9555GpioDisablePull (
IN CONST UINT32 Pcal9555SlaveAddr,
IN CONST UINT32 GpioNum
);
BOOLEAN
EFIAPI
PlatformPcal9555GpioGetState (
IN CONST UINT32 Pcal9555SlaveAddr,
IN CONST UINT32 GpioNum
);
/**
Init platform LEDs into known state.
@param PlatformType Executing platform type.
@retval EFI_SUCCESS Operation success.
**/
EFI_STATUS
EFIAPI
PlatformLedInit (
IN CONST EFI_PLATFORM_TYPE Type
);
/**
Turn on or off platform flash update LED.
@param PlatformType Executing platform type.
@param TurnOn If TRUE turn on else turn off.
@retval EFI_SUCCESS Operation success.
**/
EFI_STATUS
EFIAPI
PlatformFlashUpdateLed (
IN CONST EFI_PLATFORM_TYPE Type,
IN CONST BOOLEAN TurnOn
);
#endif // #ifndef __PLATFORM_HELPER_LIB_H__