C++程序  |  300行  |  6.05 KB

/*
 * Copyright (C) 2008 The Android Open Source Project
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 *      http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */

/*
 * Table of Dalvik opcode names.
 *
 * IMPORTANT NOTE: The contents of this file are mostly generated
 * automatically by the opcode-gen tool. Any edits to the generated
 * sections will get wiped out the next time the tool is run.
 */

#include "DexOpcodes.h"
#include <assert.h>

/*
 * Dalvik opcode names.
 */
static const char* gOpNames[kNumPackedOpcodes] = {
    // BEGIN(libdex-opcode-names); GENERATED AUTOMATICALLY BY opcode-gen
    "nop",
    "move",
    "move/from16",
    "move/16",
    "move-wide",
    "move-wide/from16",
    "move-wide/16",
    "move-object",
    "move-object/from16",
    "move-object/16",
    "move-result",
    "move-result-wide",
    "move-result-object",
    "move-exception",
    "return-void",
    "return",
    "return-wide",
    "return-object",
    "const/4",
    "const/16",
    "const",
    "const/high16",
    "const-wide/16",
    "const-wide/32",
    "const-wide",
    "const-wide/high16",
    "const-string",
    "const-string/jumbo",
    "const-class",
    "monitor-enter",
    "monitor-exit",
    "check-cast",
    "instance-of",
    "array-length",
    "new-instance",
    "new-array",
    "filled-new-array",
    "filled-new-array/range",
    "fill-array-data",
    "throw",
    "goto",
    "goto/16",
    "goto/32",
    "packed-switch",
    "sparse-switch",
    "cmpl-float",
    "cmpg-float",
    "cmpl-double",
    "cmpg-double",
    "cmp-long",
    "if-eq",
    "if-ne",
    "if-lt",
    "if-ge",
    "if-gt",
    "if-le",
    "if-eqz",
    "if-nez",
    "if-ltz",
    "if-gez",
    "if-gtz",
    "if-lez",
    "unused-3e",
    "unused-3f",
    "unused-40",
    "unused-41",
    "unused-42",
    "unused-43",
    "aget",
    "aget-wide",
    "aget-object",
    "aget-boolean",
    "aget-byte",
    "aget-char",
    "aget-short",
    "aput",
    "aput-wide",
    "aput-object",
    "aput-boolean",
    "aput-byte",
    "aput-char",
    "aput-short",
    "iget",
    "iget-wide",
    "iget-object",
    "iget-boolean",
    "iget-byte",
    "iget-char",
    "iget-short",
    "iput",
    "iput-wide",
    "iput-object",
    "iput-boolean",
    "iput-byte",
    "iput-char",
    "iput-short",
    "sget",
    "sget-wide",
    "sget-object",
    "sget-boolean",
    "sget-byte",
    "sget-char",
    "sget-short",
    "sput",
    "sput-wide",
    "sput-object",
    "sput-boolean",
    "sput-byte",
    "sput-char",
    "sput-short",
    "invoke-virtual",
    "invoke-super",
    "invoke-direct",
    "invoke-static",
    "invoke-interface",
    "unused-73",
    "invoke-virtual/range",
    "invoke-super/range",
    "invoke-direct/range",
    "invoke-static/range",
    "invoke-interface/range",
    "unused-79",
    "unused-7a",
    "neg-int",
    "not-int",
    "neg-long",
    "not-long",
    "neg-float",
    "neg-double",
    "int-to-long",
    "int-to-float",
    "int-to-double",
    "long-to-int",
    "long-to-float",
    "long-to-double",
    "float-to-int",
    "float-to-long",
    "float-to-double",
    "double-to-int",
    "double-to-long",
    "double-to-float",
    "int-to-byte",
    "int-to-char",
    "int-to-short",
    "add-int",
    "sub-int",
    "mul-int",
    "div-int",
    "rem-int",
    "and-int",
    "or-int",
    "xor-int",
    "shl-int",
    "shr-int",
    "ushr-int",
    "add-long",
    "sub-long",
    "mul-long",
    "div-long",
    "rem-long",
    "and-long",
    "or-long",
    "xor-long",
    "shl-long",
    "shr-long",
    "ushr-long",
    "add-float",
    "sub-float",
    "mul-float",
    "div-float",
    "rem-float",
    "add-double",
    "sub-double",
    "mul-double",
    "div-double",
    "rem-double",
    "add-int/2addr",
    "sub-int/2addr",
    "mul-int/2addr",
    "div-int/2addr",
    "rem-int/2addr",
    "and-int/2addr",
    "or-int/2addr",
    "xor-int/2addr",
    "shl-int/2addr",
    "shr-int/2addr",
    "ushr-int/2addr",
    "add-long/2addr",
    "sub-long/2addr",
    "mul-long/2addr",
    "div-long/2addr",
    "rem-long/2addr",
    "and-long/2addr",
    "or-long/2addr",
    "xor-long/2addr",
    "shl-long/2addr",
    "shr-long/2addr",
    "ushr-long/2addr",
    "add-float/2addr",
    "sub-float/2addr",
    "mul-float/2addr",
    "div-float/2addr",
    "rem-float/2addr",
    "add-double/2addr",
    "sub-double/2addr",
    "mul-double/2addr",
    "div-double/2addr",
    "rem-double/2addr",
    "add-int/lit16",
    "rsub-int",
    "mul-int/lit16",
    "div-int/lit16",
    "rem-int/lit16",
    "and-int/lit16",
    "or-int/lit16",
    "xor-int/lit16",
    "add-int/lit8",
    "rsub-int/lit8",
    "mul-int/lit8",
    "div-int/lit8",
    "rem-int/lit8",
    "and-int/lit8",
    "or-int/lit8",
    "xor-int/lit8",
    "shl-int/lit8",
    "shr-int/lit8",
    "ushr-int/lit8",
    "+iget-volatile",
    "+iput-volatile",
    "+sget-volatile",
    "+sput-volatile",
    "+iget-object-volatile",
    "+iget-wide-volatile",
    "+iput-wide-volatile",
    "+sget-wide-volatile",
    "+sput-wide-volatile",
    "^breakpoint",
    "^throw-verification-error",
    "+execute-inline",
    "+execute-inline/range",
    "+invoke-object-init/range",
    "+return-void-barrier",
    "+iget-quick",
    "unused-f3",
    "unused-f4",
    "unused-f5",
    "unused-f6",
    "unused-f7",
    "unused-f8",
    "unused-f9",
    "invoke-polymorphic",
    "invoke-polymorphic/range",
    "invoke-custom",
    "invoke-custom/range",
    "const-method-handle",
    "const-method-type",
    // END(libdex-opcode-names)
};

/*
 * Return the name of an opcode.
 */
const char* dexGetOpcodeName(Opcode op)
{
    assert(op >= 0 && op < kNumPackedOpcodes);
    return gOpNames[op];
}