/******************************************************************************
*
* Copyright 2009-2012 Broadcom Corporation
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at:
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
******************************************************************************/
/*******************************************************************************
*
* Filename: btif_api.h
*
* Description: Main API header file for all BTIF functions accessed
* from main bluetooth HAL. All HAL extensions will not
* require headerfiles as they would be accessed through
* callout/callins.
*
******************************************************************************/
#ifndef BTIF_API_H
#define BTIF_API_H
#include <hardware/bluetooth.h>
#include "btif_common.h"
#include "btif_dm.h"
/*******************************************************************************
* BTIF CORE API
******************************************************************************/
/*******************************************************************************
*
* Function btif_init_bluetooth
*
* Description Creates BTIF task and prepares BT scheduler for startup
*
* Returns bt_status_t
*
******************************************************************************/
bt_status_t btif_init_bluetooth(void);
/*******************************************************************************
*
* Function btif_enable_bluetooth
*
* Description Performs chip power on and kickstarts OS scheduler
*
* Returns bt_status_t
*
******************************************************************************/
bt_status_t btif_enable_bluetooth(void);
/*******************************************************************************
*
* Function btif_disable_bluetooth
*
* Description Inititates shutdown of Bluetooth system.
* Any active links will be dropped and device entering
* non connectable/discoverable mode
*
* Returns void
*
******************************************************************************/
bt_status_t btif_disable_bluetooth(void);
/*******************************************************************************
*
* Function btif_cleanup_bluetooth
*
* Description Cleanup BTIF state.
*
*
* Returns void
*
******************************************************************************/
bt_status_t btif_cleanup_bluetooth(void);
/*******************************************************************************
*
* Function is_restricted_mode
*
* Description Checks if BT was enabled in restriced mode. In restricted
* mode, bonds that are created are marked as temporary.
* These bonds persist until we leave restricted mode, at
* which point they will be deleted from the config. Also
* while in restricted mode, the user can access devices
* that are already paired before entering restricted mode,
* but they cannot remove any of these devices.
*
* Returns bool
*
******************************************************************************/
bool is_restricted_mode(void);
/*******************************************************************************
*
* Function btif_get_adapter_properties
*
* Description Fetches all local adapter properties
*
* Returns bt_status_t
*
******************************************************************************/
bt_status_t btif_get_adapter_properties(void);
/*******************************************************************************
*
* Function btif_get_adapter_property
*
* Description Fetches property value from local cache
*
* Returns bt_status_t
*
******************************************************************************/
bt_status_t btif_get_adapter_property(bt_property_type_t type);
/*******************************************************************************
*
* Function btif_set_adapter_property
*
* Description Updates core stack with property value and stores it in
* local cache
*
* Returns bt_status_t
*
******************************************************************************/
bt_status_t btif_set_adapter_property(const bt_property_t* property);
/*******************************************************************************
*
* Function btif_get_remote_device_property
*
* Description Fetches the remote device property from the NVRAM
*
* Returns bt_status_t
*
******************************************************************************/
bt_status_t btif_get_remote_device_property(RawAddress* remote_addr,
bt_property_type_t type);
/*******************************************************************************
*
* Function btif_get_remote_device_properties
*
* Description Fetches all the remote device properties from NVRAM
*
* Returns bt_status_t
*
******************************************************************************/
bt_status_t btif_get_remote_device_properties(RawAddress* remote_addr);
/*******************************************************************************
*
* Function btif_set_remote_device_property
*
* Description Writes the remote device property to NVRAM.
* Currently, BT_PROPERTY_REMOTE_FRIENDLY_NAME is the only
* remote device property that can be set
*
* Returns bt_status_t
*
******************************************************************************/
bt_status_t btif_set_remote_device_property(RawAddress* remote_addr,
const bt_property_t* property);
/*******************************************************************************
*
* Function btif_get_remote_service_record
*
* Description Looks up the service matching uuid on the remote device
* and fetches the SCN and service_name if the UUID is found
*
* Returns bt_status_t
*
******************************************************************************/
bt_status_t btif_get_remote_service_record(const RawAddress& remote_addr,
const bluetooth::Uuid& uuid);
/*******************************************************************************
* BTIF DM API
******************************************************************************/
/*******************************************************************************
*
* Function btif_dm_start_discovery
*
* Description Start device discovery/inquiry
*
*
* Returns bt_status_t
*
******************************************************************************/
bt_status_t btif_dm_start_discovery(void);
/*******************************************************************************
*
* Function btif_dm_cancel_discovery
*
* Description Cancels search
*
* Returns bt_status_t
*
******************************************************************************/
bt_status_t btif_dm_cancel_discovery(void);
/*******************************************************************************
*
* Function btif_dm_create_bond
*
* Description Initiate bonding with the specified device
*
* Returns bt_status_t
*
******************************************************************************/
bt_status_t btif_dm_create_bond(const RawAddress* bd_addr, int transport);
/*******************************************************************************
*
* Function btif_dm_create_bond_out_of_band
*
* Description Initiate bonding with the specified device using OOB data.
*
* Returns bt_status_t
*
******************************************************************************/
bt_status_t btif_dm_create_bond_out_of_band(
const RawAddress* bd_addr, int transport,
const bt_out_of_band_data_t* oob_data);
/*******************************************************************************
*
* Function btif_dm_cancel_bond
*
* Description Initiate bonding with the specified device
*
* Returns bt_status_t
*
******************************************************************************/
bt_status_t btif_dm_cancel_bond(const RawAddress* bd_addr);
/*******************************************************************************
*
* Function btif_dm_remove_bond
*
* Description Removes bonding with the specified device
*
* Returns bt_status_t
*
******************************************************************************/
bt_status_t btif_dm_remove_bond(const RawAddress* bd_addr);
/*******************************************************************************
*
* Function btif_dm_get_connection_state
*
* Description Returns whether the remote device is currently connected
*
* Returns 0 if not connected
*
******************************************************************************/
uint16_t btif_dm_get_connection_state(const RawAddress* bd_addr);
/*******************************************************************************
*
* Function btif_dm_pin_reply
*
* Description BT legacy pairing - PIN code reply
*
* Returns bt_status_t
*
******************************************************************************/
bt_status_t btif_dm_pin_reply(const RawAddress* bd_addr, uint8_t accept,
uint8_t pin_len, bt_pin_code_t* pin_code);
/*******************************************************************************
*
* Function btif_dm_passkey_reply
*
* Description BT SSP passkey reply
*
* Returns bt_status_t
*
******************************************************************************/
bt_status_t btif_dm_passkey_reply(const RawAddress* bd_addr, uint8_t accept,
uint32_t passkey);
/*******************************************************************************
*
* Function btif_dm_ssp_reply
*
* Description BT SSP Reply - Just Works, Numeric Comparison & Passkey
* Entry
*
* Returns bt_status_t
*
******************************************************************************/
bt_status_t btif_dm_ssp_reply(const RawAddress* bd_addr,
bt_ssp_variant_t variant, uint8_t accept,
uint32_t passkey);
/*******************************************************************************
*
* Function btif_dm_get_adapter_property
*
* Description Queries the BTA for the adapter property
*
* Returns bt_status_t
*
******************************************************************************/
bt_status_t btif_dm_get_adapter_property(bt_property_t* prop);
/*******************************************************************************
*
* Function btif_dm_get_remote_services
*
* Description Start SDP to get remote services
*
* Returns bt_status_t
*
******************************************************************************/
bt_status_t btif_dm_get_remote_service_record(const RawAddress& remote_addr,
const bluetooth::Uuid& uuid);
/*******************************************************************************
*
* Function btif_dm_get_remote_services
*
* Description Start SDP to get remote services
*
* Returns bt_status_t
*
******************************************************************************/
bt_status_t btif_dm_get_remote_services(const RawAddress& remote_addr);
/*******************************************************************************
*
* Function btif_dm_get_remote_services_by_transport
*
* Description Start SDP to get remote services by transport
*
* Returns bt_status_t
*
******************************************************************************/
bt_status_t btif_dm_get_remote_services_by_transport(RawAddress* remote_addr,
int transport);
/*******************************************************************************
*
* Function btif_dut_mode_configure
*
* Description Configure Test Mode - 'enable' to 1 puts the device in test
* mode and 0 exits test mode
*
* Returns BT_STATUS_SUCCESS on success
*
******************************************************************************/
bt_status_t btif_dut_mode_configure(uint8_t enable);
/*******************************************************************************
*
* Function btif_dut_mode_send
*
* Description Sends a HCI Vendor specific command to the controller
*
* Returns BT_STATUS_SUCCESS on success
*
******************************************************************************/
bt_status_t btif_dut_mode_send(uint16_t opcode, uint8_t* buf, uint8_t len);
/*******************************************************************************
*
* Function btif_le_test_mode
*
* Description Sends a HCI BLE Test command to the Controller
*
* Returns BT_STATUS_SUCCESS on success
*
******************************************************************************/
bt_status_t btif_le_test_mode(uint16_t opcode, uint8_t* buf, uint8_t len);
/*******************************************************************************
*
* Function btif_dm_read_energy_info
*
* Description Reads the energy info from controller
*
* Returns void
*
******************************************************************************/
void btif_dm_read_energy_info();
/*******************************************************************************
*
* Function btif_config_hci_snoop_log
*
* Description enable or disable HCI snoop log
*
* Returns BT_STATUS_SUCCESS on success
*
******************************************************************************/
bt_status_t btif_config_hci_snoop_log(uint8_t enable);
/*******************************************************************************
*
* Function btif_debug_bond_event_dump
*
* Description Dump bond event information
*
* Returns void
*
******************************************************************************/
void btif_debug_bond_event_dump(int fd);
#endif /* BTIF_API_H */