; RUN: llc -mtriple=x86_64-unknown-unknown -mattr=+avx -fixup-byte-word-insts=1 < %s | FileCheck -check-prefix=CHECK -check-prefix=BWON %s
; RUN: llc -mtriple=x86_64-unknown-unknown -mattr=+avx -fixup-byte-word-insts=0 < %s | FileCheck -check-prefix=CHECK -check-prefix=BWOFF %s
; RUN: llc -mtriple=x86_64-unknown-unknown -mattr=+avx -addr-sink-using-gep=1 < %s | FileCheck -check-prefix=CHECK -check-prefix=BWON %s
%struct.A = type { i8, i8, i8, i8, i8, i8, i8, i8 }
%struct.B = type { i32, i32, i32, i32, i32, i32, i32, i32 }
; CHECK-LABEL: merge_const_store:
; save 1,2,3 ... as one big integer.
; CHECK: movabsq $578437695752307201
; CHECK: ret
define void @merge_const_store(i32 %count, %struct.A* nocapture %p) nounwind uwtable noinline ssp {
%1 = icmp sgt i32 %count, 0
br i1 %1, label %.lr.ph, label %._crit_edge
.lr.ph:
%i.02 = phi i32 [ %10, %.lr.ph ], [ 0, %0 ]
%.01 = phi %struct.A* [ %11, %.lr.ph ], [ %p, %0 ]
%2 = getelementptr inbounds %struct.A, %struct.A* %.01, i64 0, i32 0
store i8 1, i8* %2, align 1
%3 = getelementptr inbounds %struct.A, %struct.A* %.01, i64 0, i32 1
store i8 2, i8* %3, align 1
%4 = getelementptr inbounds %struct.A, %struct.A* %.01, i64 0, i32 2
store i8 3, i8* %4, align 1
%5 = getelementptr inbounds %struct.A, %struct.A* %.01, i64 0, i32 3
store i8 4, i8* %5, align 1
%6 = getelementptr inbounds %struct.A, %struct.A* %.01, i64 0, i32 4
store i8 5, i8* %6, align 1
%7 = getelementptr inbounds %struct.A, %struct.A* %.01, i64 0, i32 5
store i8 6, i8* %7, align 1
%8 = getelementptr inbounds %struct.A, %struct.A* %.01, i64 0, i32 6
store i8 7, i8* %8, align 1
%9 = getelementptr inbounds %struct.A, %struct.A* %.01, i64 0, i32 7
store i8 8, i8* %9, align 1
%10 = add nsw i32 %i.02, 1
%11 = getelementptr inbounds %struct.A, %struct.A* %.01, i64 1
%exitcond = icmp eq i32 %10, %count
br i1 %exitcond, label %._crit_edge, label %.lr.ph
._crit_edge:
ret void
}
; No vectors because we use noimplicitfloat
; CHECK-LABEL: merge_const_store_no_vec:
; CHECK-NOT: vmovups
; CHECK: ret
define void @merge_const_store_no_vec(i32 %count, %struct.B* nocapture %p) noimplicitfloat{
%1 = icmp sgt i32 %count, 0
br i1 %1, label %.lr.ph, label %._crit_edge
.lr.ph:
%i.02 = phi i32 [ %10, %.lr.ph ], [ 0, %0 ]
%.01 = phi %struct.B* [ %11, %.lr.ph ], [ %p, %0 ]
%2 = getelementptr inbounds %struct.B, %struct.B* %.01, i64 0, i32 0
store i32 0, i32* %2, align 4
%3 = getelementptr inbounds %struct.B, %struct.B* %.01, i64 0, i32 1
store i32 0, i32* %3, align 4
%4 = getelementptr inbounds %struct.B, %struct.B* %.01, i64 0, i32 2
store i32 0, i32* %4, align 4
%5 = getelementptr inbounds %struct.B, %struct.B* %.01, i64 0, i32 3
store i32 0, i32* %5, align 4
%6 = getelementptr inbounds %struct.B, %struct.B* %.01, i64 0, i32 4
store i32 0, i32* %6, align 4
%7 = getelementptr inbounds %struct.B, %struct.B* %.01, i64 0, i32 5
store i32 0, i32* %7, align 4
%8 = getelementptr inbounds %struct.B, %struct.B* %.01, i64 0, i32 6
store i32 0, i32* %8, align 4
%9 = getelementptr inbounds %struct.B, %struct.B* %.01, i64 0, i32 7
store i32 0, i32* %9, align 4
%10 = add nsw i32 %i.02, 1
%11 = getelementptr inbounds %struct.B, %struct.B* %.01, i64 1
%exitcond = icmp eq i32 %10, %count
br i1 %exitcond, label %._crit_edge, label %.lr.ph
._crit_edge:
ret void
}
; Move the constants using a single vector store.
; CHECK-LABEL: merge_const_store_vec:
; CHECK: vmovups
; CHECK: ret
define void @merge_const_store_vec(i32 %count, %struct.B* nocapture %p) nounwind uwtable noinline ssp {
%1 = icmp sgt i32 %count, 0
br i1 %1, label %.lr.ph, label %._crit_edge
.lr.ph:
%i.02 = phi i32 [ %10, %.lr.ph ], [ 0, %0 ]
%.01 = phi %struct.B* [ %11, %.lr.ph ], [ %p, %0 ]
%2 = getelementptr inbounds %struct.B, %struct.B* %.01, i64 0, i32 0
store i32 0, i32* %2, align 4
%3 = getelementptr inbounds %struct.B, %struct.B* %.01, i64 0, i32 1
store i32 0, i32* %3, align 4
%4 = getelementptr inbounds %struct.B, %struct.B* %.01, i64 0, i32 2
store i32 0, i32* %4, align 4
%5 = getelementptr inbounds %struct.B, %struct.B* %.01, i64 0, i32 3
store i32 0, i32* %5, align 4
%6 = getelementptr inbounds %struct.B, %struct.B* %.01, i64 0, i32 4
store i32 0, i32* %6, align 4
%7 = getelementptr inbounds %struct.B, %struct.B* %.01, i64 0, i32 5
store i32 0, i32* %7, align 4
%8 = getelementptr inbounds %struct.B, %struct.B* %.01, i64 0, i32 6
store i32 0, i32* %8, align 4
%9 = getelementptr inbounds %struct.B, %struct.B* %.01, i64 0, i32 7
store i32 0, i32* %9, align 4
%10 = add nsw i32 %i.02, 1
%11 = getelementptr inbounds %struct.B, %struct.B* %.01, i64 1
%exitcond = icmp eq i32 %10, %count
br i1 %exitcond, label %._crit_edge, label %.lr.ph
._crit_edge:
ret void
}
; Move the first 4 constants as a single vector. Move the rest as scalars.
; CHECK-LABEL: merge_nonconst_store:
; CHECK: movl $67305985
; CHECK: movb
; CHECK: movb
; CHECK: movb
; CHECK: movb
; CHECK: ret
define void @merge_nonconst_store(i32 %count, i8 %zz, %struct.A* nocapture %p) nounwind uwtable noinline ssp {
%1 = icmp sgt i32 %count, 0
br i1 %1, label %.lr.ph, label %._crit_edge
.lr.ph:
%i.02 = phi i32 [ %10, %.lr.ph ], [ 0, %0 ]
%.01 = phi %struct.A* [ %11, %.lr.ph ], [ %p, %0 ]
%2 = getelementptr inbounds %struct.A, %struct.A* %.01, i64 0, i32 0
store i8 1, i8* %2, align 1
%3 = getelementptr inbounds %struct.A, %struct.A* %.01, i64 0, i32 1
store i8 2, i8* %3, align 1
%4 = getelementptr inbounds %struct.A, %struct.A* %.01, i64 0, i32 2
store i8 3, i8* %4, align 1
%5 = getelementptr inbounds %struct.A, %struct.A* %.01, i64 0, i32 3
store i8 4, i8* %5, align 1
%6 = getelementptr inbounds %struct.A, %struct.A* %.01, i64 0, i32 4
store i8 %zz, i8* %6, align 1 ; <----------- Not a const;
%7 = getelementptr inbounds %struct.A, %struct.A* %.01, i64 0, i32 5
store i8 6, i8* %7, align 1
%8 = getelementptr inbounds %struct.A, %struct.A* %.01, i64 0, i32 6
store i8 7, i8* %8, align 1
%9 = getelementptr inbounds %struct.A, %struct.A* %.01, i64 0, i32 7
store i8 8, i8* %9, align 1
%10 = add nsw i32 %i.02, 1
%11 = getelementptr inbounds %struct.A, %struct.A* %.01, i64 1
%exitcond = icmp eq i32 %10, %count
br i1 %exitcond, label %._crit_edge, label %.lr.ph
._crit_edge:
ret void
}
; CHECK-LABEL: merge_loads_i16:
; load:
; BWON: movzwl
; BWOFF: movw
; store:
; CHECK: movw
; CHECK: ret
define void @merge_loads_i16(i32 %count, %struct.A* noalias nocapture %q, %struct.A* noalias nocapture %p) nounwind uwtable noinline ssp {
%1 = icmp sgt i32 %count, 0
br i1 %1, label %.lr.ph, label %._crit_edge
.lr.ph: ; preds = %0
%2 = getelementptr inbounds %struct.A, %struct.A* %q, i64 0, i32 0
%3 = getelementptr inbounds %struct.A, %struct.A* %q, i64 0, i32 1
br label %4
; <label>:4 ; preds = %4, %.lr.ph
%i.02 = phi i32 [ 0, %.lr.ph ], [ %9, %4 ]
%.01 = phi %struct.A* [ %p, %.lr.ph ], [ %10, %4 ]
%5 = load i8, i8* %2, align 1
%6 = load i8, i8* %3, align 1
%7 = getelementptr inbounds %struct.A, %struct.A* %.01, i64 0, i32 0
store i8 %5, i8* %7, align 1
%8 = getelementptr inbounds %struct.A, %struct.A* %.01, i64 0, i32 1
store i8 %6, i8* %8, align 1
%9 = add nsw i32 %i.02, 1
%10 = getelementptr inbounds %struct.A, %struct.A* %.01, i64 1
%exitcond = icmp eq i32 %9, %count
br i1 %exitcond, label %._crit_edge, label %4
._crit_edge: ; preds = %4, %0
ret void
}
; The loads and the stores are interleaved. Can't merge them.
; CHECK-LABEL: no_merge_loads:
; BWON: movzbl
; BWOFF: movb
; CHECK: movb
; BWON: movzbl
; BWOFF: movb
; CHECK: movb
; CHECK: ret
define void @no_merge_loads(i32 %count, %struct.A* noalias nocapture %q, %struct.A* noalias nocapture %p) nounwind uwtable noinline ssp {
%1 = icmp sgt i32 %count, 0
br i1 %1, label %.lr.ph, label %._crit_edge
.lr.ph: ; preds = %0
%2 = getelementptr inbounds %struct.A, %struct.A* %q, i64 0, i32 0
%3 = getelementptr inbounds %struct.A, %struct.A* %q, i64 0, i32 1
br label %a4
a4: ; preds = %4, %.lr.ph
%i.02 = phi i32 [ 0, %.lr.ph ], [ %a9, %a4 ]
%.01 = phi %struct.A* [ %p, %.lr.ph ], [ %a10, %a4 ]
%a5 = load i8, i8* %2, align 1
%a7 = getelementptr inbounds %struct.A, %struct.A* %.01, i64 0, i32 0
store i8 %a5, i8* %a7, align 1
%a8 = getelementptr inbounds %struct.A, %struct.A* %.01, i64 0, i32 1
%a6 = load i8, i8* %3, align 1
store i8 %a6, i8* %a8, align 1
%a9 = add nsw i32 %i.02, 1
%a10 = getelementptr inbounds %struct.A, %struct.A* %.01, i64 1
%exitcond = icmp eq i32 %a9, %count
br i1 %exitcond, label %._crit_edge, label %a4
._crit_edge: ; preds = %4, %0
ret void
}
; CHECK-LABEL: merge_loads_integer:
; load:
; CHECK: movq
; store:
; CHECK: movq
; CHECK: ret
define void @merge_loads_integer(i32 %count, %struct.B* noalias nocapture %q, %struct.B* noalias nocapture %p) nounwind uwtable noinline ssp {
%1 = icmp sgt i32 %count, 0
br i1 %1, label %.lr.ph, label %._crit_edge
.lr.ph: ; preds = %0
%2 = getelementptr inbounds %struct.B, %struct.B* %q, i64 0, i32 0
%3 = getelementptr inbounds %struct.B, %struct.B* %q, i64 0, i32 1
br label %4
; <label>:4 ; preds = %4, %.lr.ph
%i.02 = phi i32 [ 0, %.lr.ph ], [ %9, %4 ]
%.01 = phi %struct.B* [ %p, %.lr.ph ], [ %10, %4 ]
%5 = load i32, i32* %2
%6 = load i32, i32* %3
%7 = getelementptr inbounds %struct.B, %struct.B* %.01, i64 0, i32 0
store i32 %5, i32* %7
%8 = getelementptr inbounds %struct.B, %struct.B* %.01, i64 0, i32 1
store i32 %6, i32* %8
%9 = add nsw i32 %i.02, 1
%10 = getelementptr inbounds %struct.B, %struct.B* %.01, i64 1
%exitcond = icmp eq i32 %9, %count
br i1 %exitcond, label %._crit_edge, label %4
._crit_edge: ; preds = %4, %0
ret void
}
; CHECK-LABEL: merge_loads_vector:
; load:
; CHECK: movups
; store:
; CHECK: movups
; CHECK: ret
define void @merge_loads_vector(i32 %count, %struct.B* noalias nocapture %q, %struct.B* noalias nocapture %p) nounwind uwtable noinline ssp {
%a1 = icmp sgt i32 %count, 0
br i1 %a1, label %.lr.ph, label %._crit_edge
.lr.ph: ; preds = %0
%a2 = getelementptr inbounds %struct.B, %struct.B* %q, i64 0, i32 0
%a3 = getelementptr inbounds %struct.B, %struct.B* %q, i64 0, i32 1
%a4 = getelementptr inbounds %struct.B, %struct.B* %q, i64 0, i32 2
%a5 = getelementptr inbounds %struct.B, %struct.B* %q, i64 0, i32 3
br label %block4
block4: ; preds = %4, %.lr.ph
%i.02 = phi i32 [ 0, %.lr.ph ], [ %c9, %block4 ]
%.01 = phi %struct.B* [ %p, %.lr.ph ], [ %c10, %block4 ]
%a7 = getelementptr inbounds %struct.B, %struct.B* %.01, i64 0, i32 0
%a8 = getelementptr inbounds %struct.B, %struct.B* %.01, i64 0, i32 1
%a9 = getelementptr inbounds %struct.B, %struct.B* %.01, i64 0, i32 2
%a10 = getelementptr inbounds %struct.B, %struct.B* %.01, i64 0, i32 3
%b1 = load i32, i32* %a2
%b2 = load i32, i32* %a3
%b3 = load i32, i32* %a4
%b4 = load i32, i32* %a5
store i32 %b1, i32* %a7
store i32 %b2, i32* %a8
store i32 %b3, i32* %a9
store i32 %b4, i32* %a10
%c9 = add nsw i32 %i.02, 1
%c10 = getelementptr inbounds %struct.B, %struct.B* %.01, i64 1
%exitcond = icmp eq i32 %c9, %count
br i1 %exitcond, label %._crit_edge, label %block4
._crit_edge: ; preds = %4, %0
ret void
}
;; On x86, even unaligned copies should be merged to vector ops.
;; TODO: however, this cannot happen at the moment, due to brokenness
;; in MergeConsecutiveStores. See UseAA FIXME in DAGCombiner.cpp
;; visitSTORE.
; CHECK-LABEL: merge_loads_no_align:
; load:
; CHECK-NOT: vmovups ;; TODO
; store:
; CHECK-NOT: vmovups ;; TODO
; CHECK: ret
define void @merge_loads_no_align(i32 %count, %struct.B* noalias nocapture %q, %struct.B* noalias nocapture %p) nounwind uwtable noinline ssp {
%a1 = icmp sgt i32 %count, 0
br i1 %a1, label %.lr.ph, label %._crit_edge
.lr.ph: ; preds = %0
%a2 = getelementptr inbounds %struct.B, %struct.B* %q, i64 0, i32 0
%a3 = getelementptr inbounds %struct.B, %struct.B* %q, i64 0, i32 1
%a4 = getelementptr inbounds %struct.B, %struct.B* %q, i64 0, i32 2
%a5 = getelementptr inbounds %struct.B, %struct.B* %q, i64 0, i32 3
br label %block4
block4: ; preds = %4, %.lr.ph
%i.02 = phi i32 [ 0, %.lr.ph ], [ %c9, %block4 ]
%.01 = phi %struct.B* [ %p, %.lr.ph ], [ %c10, %block4 ]
%a7 = getelementptr inbounds %struct.B, %struct.B* %.01, i64 0, i32 0
%a8 = getelementptr inbounds %struct.B, %struct.B* %.01, i64 0, i32 1
%a9 = getelementptr inbounds %struct.B, %struct.B* %.01, i64 0, i32 2
%a10 = getelementptr inbounds %struct.B, %struct.B* %.01, i64 0, i32 3
%b1 = load i32, i32* %a2, align 1
%b2 = load i32, i32* %a3, align 1
%b3 = load i32, i32* %a4, align 1
%b4 = load i32, i32* %a5, align 1
store i32 %b1, i32* %a7, align 1
store i32 %b2, i32* %a8, align 1
store i32 %b3, i32* %a9, align 1
store i32 %b4, i32* %a10, align 1
%c9 = add nsw i32 %i.02, 1
%c10 = getelementptr inbounds %struct.B, %struct.B* %.01, i64 1
%exitcond = icmp eq i32 %c9, %count
br i1 %exitcond, label %._crit_edge, label %block4
._crit_edge: ; preds = %4, %0
ret void
}
; Make sure that we merge the consecutive load/store sequence below and use a
; word (16 bit) instead of a byte copy.
; CHECK-LABEL: MergeLoadStoreBaseIndexOffset:
; BWON: movzwl (%{{.*}},%{{.*}}), %e[[REG:[a-z]+]]
; BWOFF: movw (%{{.*}},%{{.*}}), %[[REG:[a-z]+]]
; CHECK: movw %[[REG]], (%{{.*}})
define void @MergeLoadStoreBaseIndexOffset(i64* %a, i8* %b, i8* %c, i32 %n) {
br label %1
; <label>:1
%.09 = phi i32 [ %n, %0 ], [ %11, %1 ]
%.08 = phi i8* [ %b, %0 ], [ %10, %1 ]
%.0 = phi i64* [ %a, %0 ], [ %2, %1 ]
%2 = getelementptr inbounds i64, i64* %.0, i64 1
%3 = load i64, i64* %.0, align 1
%4 = getelementptr inbounds i8, i8* %c, i64 %3
%5 = load i8, i8* %4, align 1
%6 = add i64 %3, 1
%7 = getelementptr inbounds i8, i8* %c, i64 %6
%8 = load i8, i8* %7, align 1
store i8 %5, i8* %.08, align 1
%9 = getelementptr inbounds i8, i8* %.08, i64 1
store i8 %8, i8* %9, align 1
%10 = getelementptr inbounds i8, i8* %.08, i64 2
%11 = add nsw i32 %.09, -1
%12 = icmp eq i32 %11, 0
br i1 %12, label %13, label %1
; <label>:13
ret void
}
; Make sure that we merge the consecutive load/store sequence below and use a
; word (16 bit) instead of a byte copy even if there are intermediate sign
; extensions.
; CHECK-LABEL: MergeLoadStoreBaseIndexOffsetSext:
; BWON: movzwl (%{{.*}},%{{.*}}), %e[[REG:[a-z]+]]
; BWOFF: movw (%{{.*}},%{{.*}}), %[[REG:[a-z]+]]
; CHECK: movw %[[REG]], (%{{.*}})
define void @MergeLoadStoreBaseIndexOffsetSext(i8* %a, i8* %b, i8* %c, i32 %n) {
br label %1
; <label>:1
%.09 = phi i32 [ %n, %0 ], [ %12, %1 ]
%.08 = phi i8* [ %b, %0 ], [ %11, %1 ]
%.0 = phi i8* [ %a, %0 ], [ %2, %1 ]
%2 = getelementptr inbounds i8, i8* %.0, i64 1
%3 = load i8, i8* %.0, align 1
%4 = sext i8 %3 to i64
%5 = getelementptr inbounds i8, i8* %c, i64 %4
%6 = load i8, i8* %5, align 1
%7 = add i64 %4, 1
%8 = getelementptr inbounds i8, i8* %c, i64 %7
%9 = load i8, i8* %8, align 1
store i8 %6, i8* %.08, align 1
%10 = getelementptr inbounds i8, i8* %.08, i64 1
store i8 %9, i8* %10, align 1
%11 = getelementptr inbounds i8, i8* %.08, i64 2
%12 = add nsw i32 %.09, -1
%13 = icmp eq i32 %12, 0
br i1 %13, label %14, label %1
; <label>:14
ret void
}
; However, we can only merge ignore sign extensions when they are on all memory
; computations;
; CHECK-LABEL: loadStoreBaseIndexOffsetSextNoSex:
; CHECK-NOT: movw (%{{.*}},%{{.*}}), [[REG:%[a-z]+]]
; CHECK-NOT: movw [[REG]], (%{{.*}})
define void @loadStoreBaseIndexOffsetSextNoSex(i8* %a, i8* %b, i8* %c, i32 %n) {
br label %1
; <label>:1
%.09 = phi i32 [ %n, %0 ], [ %12, %1 ]
%.08 = phi i8* [ %b, %0 ], [ %11, %1 ]
%.0 = phi i8* [ %a, %0 ], [ %2, %1 ]
%2 = getelementptr inbounds i8, i8* %.0, i64 1
%3 = load i8, i8* %.0, align 1
%4 = sext i8 %3 to i64
%5 = getelementptr inbounds i8, i8* %c, i64 %4
%6 = load i8, i8* %5, align 1
%7 = add i8 %3, 1
%wrap.4 = sext i8 %7 to i64
%8 = getelementptr inbounds i8, i8* %c, i64 %wrap.4
%9 = load i8, i8* %8, align 1
store i8 %6, i8* %.08, align 1
%10 = getelementptr inbounds i8, i8* %.08, i64 1
store i8 %9, i8* %10, align 1
%11 = getelementptr inbounds i8, i8* %.08, i64 2
%12 = add nsw i32 %.09, -1
%13 = icmp eq i32 %12, 0
br i1 %13, label %14, label %1
; <label>:14
ret void
}
; PR21711 ( http://llvm.org/bugs/show_bug.cgi?id=21711 )
define void @merge_vec_element_store(<8 x float> %v, float* %ptr) {
%vecext0 = extractelement <8 x float> %v, i32 0
%vecext1 = extractelement <8 x float> %v, i32 1
%vecext2 = extractelement <8 x float> %v, i32 2
%vecext3 = extractelement <8 x float> %v, i32 3
%vecext4 = extractelement <8 x float> %v, i32 4
%vecext5 = extractelement <8 x float> %v, i32 5
%vecext6 = extractelement <8 x float> %v, i32 6
%vecext7 = extractelement <8 x float> %v, i32 7
%arrayidx1 = getelementptr inbounds float, float* %ptr, i64 1
%arrayidx2 = getelementptr inbounds float, float* %ptr, i64 2
%arrayidx3 = getelementptr inbounds float, float* %ptr, i64 3
%arrayidx4 = getelementptr inbounds float, float* %ptr, i64 4
%arrayidx5 = getelementptr inbounds float, float* %ptr, i64 5
%arrayidx6 = getelementptr inbounds float, float* %ptr, i64 6
%arrayidx7 = getelementptr inbounds float, float* %ptr, i64 7
store float %vecext0, float* %ptr, align 4
store float %vecext1, float* %arrayidx1, align 4
store float %vecext2, float* %arrayidx2, align 4
store float %vecext3, float* %arrayidx3, align 4
store float %vecext4, float* %arrayidx4, align 4
store float %vecext5, float* %arrayidx5, align 4
store float %vecext6, float* %arrayidx6, align 4
store float %vecext7, float* %arrayidx7, align 4
ret void
; CHECK-LABEL: merge_vec_element_store
; CHECK: vmovups
; CHECK-NEXT: vzeroupper
; CHECK-NEXT: retq
}
; PR21711 - Merge vector stores into wider vector stores.
; These should be merged into 32-byte stores.
define void @merge_vec_extract_stores(<8 x float> %v1, <8 x float> %v2, <4 x float>* %ptr) {
%idx0 = getelementptr inbounds <4 x float>, <4 x float>* %ptr, i64 3
%idx1 = getelementptr inbounds <4 x float>, <4 x float>* %ptr, i64 4
%idx2 = getelementptr inbounds <4 x float>, <4 x float>* %ptr, i64 5
%idx3 = getelementptr inbounds <4 x float>, <4 x float>* %ptr, i64 6
%shuffle0 = shufflevector <8 x float> %v1, <8 x float> undef, <4 x i32> <i32 0, i32 1, i32 2, i32 3>
%shuffle1 = shufflevector <8 x float> %v1, <8 x float> undef, <4 x i32> <i32 4, i32 5, i32 6, i32 7>
%shuffle2 = shufflevector <8 x float> %v2, <8 x float> undef, <4 x i32> <i32 0, i32 1, i32 2, i32 3>
%shuffle3 = shufflevector <8 x float> %v2, <8 x float> undef, <4 x i32> <i32 4, i32 5, i32 6, i32 7>
store <4 x float> %shuffle0, <4 x float>* %idx0, align 16
store <4 x float> %shuffle1, <4 x float>* %idx1, align 16
store <4 x float> %shuffle2, <4 x float>* %idx2, align 16
store <4 x float> %shuffle3, <4 x float>* %idx3, align 16
ret void
; CHECK-LABEL: merge_vec_extract_stores
; CHECK: vmovups %ymm0, 48(%rdi)
; CHECK-NEXT: vmovups %ymm1, 80(%rdi)
; CHECK-NEXT: vzeroupper
; CHECK-NEXT: retq
}
; Merging vector stores when sourced from vector loads is not currently handled.
define void @merge_vec_stores_from_loads(<4 x float>* %v, <4 x float>* %ptr) {
%load_idx0 = getelementptr inbounds <4 x float>, <4 x float>* %v, i64 0
%load_idx1 = getelementptr inbounds <4 x float>, <4 x float>* %v, i64 1
%v0 = load <4 x float>, <4 x float>* %load_idx0
%v1 = load <4 x float>, <4 x float>* %load_idx1
%store_idx0 = getelementptr inbounds <4 x float>, <4 x float>* %ptr, i64 0
%store_idx1 = getelementptr inbounds <4 x float>, <4 x float>* %ptr, i64 1
store <4 x float> %v0, <4 x float>* %store_idx0, align 16
store <4 x float> %v1, <4 x float>* %store_idx1, align 16
ret void
; CHECK-LABEL: merge_vec_stores_from_loads
; CHECK: vmovaps
; CHECK-NEXT: vmovaps
; CHECK-NEXT: vmovaps
; CHECK-NEXT: vmovaps
; CHECK-NEXT: retq
}
; Merging vector stores when sourced from a constant vector is not currently handled.
define void @merge_vec_stores_of_constants(<4 x i32>* %ptr) {
%idx0 = getelementptr inbounds <4 x i32>, <4 x i32>* %ptr, i64 3
%idx1 = getelementptr inbounds <4 x i32>, <4 x i32>* %ptr, i64 4
store <4 x i32> <i32 0, i32 0, i32 0, i32 0>, <4 x i32>* %idx0, align 16
store <4 x i32> <i32 0, i32 0, i32 0, i32 0>, <4 x i32>* %idx1, align 16
ret void
; CHECK-LABEL: merge_vec_stores_of_constants
; CHECK: vxorps
; CHECK-NEXT: vmovaps
; CHECK-NEXT: vmovaps
; CHECK-NEXT: retq
}
; This is a minimized test based on real code that was failing.
; We could merge stores (and loads) like this...
define void @merge_vec_element_and_scalar_load([6 x i64]* %array) {
%idx0 = getelementptr inbounds [6 x i64], [6 x i64]* %array, i64 0, i64 0
%idx1 = getelementptr inbounds [6 x i64], [6 x i64]* %array, i64 0, i64 1
%idx4 = getelementptr inbounds [6 x i64], [6 x i64]* %array, i64 0, i64 4
%idx5 = getelementptr inbounds [6 x i64], [6 x i64]* %array, i64 0, i64 5
%a0 = load i64, i64* %idx0, align 8
store i64 %a0, i64* %idx4, align 8
%b = bitcast i64* %idx1 to <2 x i64>*
%v = load <2 x i64>, <2 x i64>* %b, align 8
%a1 = extractelement <2 x i64> %v, i32 0
store i64 %a1, i64* %idx5, align 8
ret void
; CHECK-LABEL: merge_vec_element_and_scalar_load
; CHECK: movq (%rdi), %rax
; CHECK-NEXT: movq %rax, 32(%rdi)
; CHECK-NEXT: movq 8(%rdi), %rax
; CHECK-NEXT: movq %rax, 40(%rdi)
; CHECK-NEXT: retq
}