/** @file
  Implement TPM2 DictionaryAttack related command.

Copyright (c) 2013 - 2016, Intel Corporation. All rights reserved. <BR>
This program and the accompanying materials
are licensed and made available under the terms and conditions of the BSD License
which accompanies this distribution.  The full text of the license may be found at
http://opensource.org/licenses/bsd-license.php

THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.

**/

#include <IndustryStandard/UefiTcgPlatform.h>
#include <Library/Tpm2CommandLib.h>
#include <Library/Tpm2DeviceLib.h>
#include <Library/BaseMemoryLib.h>
#include <Library/BaseLib.h>
#include <Library/DebugLib.h>

#pragma pack(1)

typedef struct {
  TPM2_COMMAND_HEADER       Header;
  TPMI_RH_LOCKOUT           LockHandle;
  UINT32                    AuthSessionSize;
  TPMS_AUTH_COMMAND         AuthSession;
} TPM2_DICTIONARY_ATTACK_LOCK_RESET_COMMAND;

typedef struct {
  TPM2_RESPONSE_HEADER       Header;
  UINT32                     AuthSessionSize;
  TPMS_AUTH_RESPONSE         AuthSession;
} TPM2_DICTIONARY_ATTACK_LOCK_RESET_RESPONSE;

typedef struct {
  TPM2_COMMAND_HEADER       Header;
  TPMI_RH_LOCKOUT           LockHandle;
  UINT32                    AuthSessionSize;
  TPMS_AUTH_COMMAND         AuthSession;
  UINT32                    NewMaxTries;
  UINT32                    NewRecoveryTime;
  UINT32                    LockoutRecovery;
} TPM2_DICTIONARY_ATTACK_PARAMETERS_COMMAND;

typedef struct {
  TPM2_RESPONSE_HEADER       Header;
  UINT32                     AuthSessionSize;
  TPMS_AUTH_RESPONSE         AuthSession;
} TPM2_DICTIONARY_ATTACK_PARAMETERS_RESPONSE;

#pragma pack()

/**
  This command cancels the effect of a TPM lockout due to a number of successive authorization failures.
  If this command is properly authorized, the lockout counter is set to zero.

  @param[in]  LockHandle            TPM_RH_LOCKOUT
  @param[in]  AuthSession           Auth Session context

  @retval EFI_SUCCESS      Operation completed successfully.
  @retval EFI_DEVICE_ERROR Unexpected device behavior.
**/
EFI_STATUS
EFIAPI
Tpm2DictionaryAttackLockReset (
  IN  TPMI_RH_LOCKOUT           LockHandle,
  IN  TPMS_AUTH_COMMAND         *AuthSession
  )
{
  EFI_STATUS                                 Status;
  TPM2_DICTIONARY_ATTACK_LOCK_RESET_COMMAND  SendBuffer;
  TPM2_DICTIONARY_ATTACK_LOCK_RESET_RESPONSE RecvBuffer;
  UINT32                                     SendBufferSize;
  UINT32                                     RecvBufferSize;
  UINT8                                      *Buffer;
  UINT32                                     SessionInfoSize;

  //
  // Construct command
  //
  SendBuffer.Header.tag = SwapBytes16(TPM_ST_SESSIONS);
  SendBuffer.Header.commandCode = SwapBytes32(TPM_CC_DictionaryAttackLockReset);

  SendBuffer.LockHandle = SwapBytes32 (LockHandle);

  //
  // Add in Auth session
  //
  Buffer = (UINT8 *)&SendBuffer.AuthSession;

  // sessionInfoSize
  SessionInfoSize = CopyAuthSessionCommand (AuthSession, Buffer);
  Buffer += SessionInfoSize;
  SendBuffer.AuthSessionSize = SwapBytes32(SessionInfoSize);

  SendBufferSize = (UINT32)((UINTN)Buffer - (UINTN)&SendBuffer);
  SendBuffer.Header.paramSize = SwapBytes32 (SendBufferSize);

  //
  // send Tpm command
  //
  RecvBufferSize = sizeof (RecvBuffer);
  Status = Tpm2SubmitCommand (SendBufferSize, (UINT8 *)&SendBuffer, &RecvBufferSize, (UINT8 *)&RecvBuffer);
  if (EFI_ERROR (Status)) {
    goto Done;
  }

  if (RecvBufferSize < sizeof (TPM2_RESPONSE_HEADER)) {
    DEBUG ((EFI_D_ERROR, "Tpm2DictionaryAttackLockReset - RecvBufferSize Error - %x\n", RecvBufferSize));
    Status = EFI_DEVICE_ERROR;
    goto Done;
  }
  if (SwapBytes32(RecvBuffer.Header.responseCode) != TPM_RC_SUCCESS) {
    DEBUG ((EFI_D_ERROR, "Tpm2DictionaryAttackLockReset - responseCode - %x\n", SwapBytes32(RecvBuffer.Header.responseCode)));
    Status = EFI_DEVICE_ERROR;
    goto Done;
  }

Done:
  //
  // Clear AuthSession Content
  //
  ZeroMem (&SendBuffer, sizeof(SendBuffer));
  ZeroMem (&RecvBuffer, sizeof(RecvBuffer));
  return Status;
}

/**
  This command cancels the effect of a TPM lockout due to a number of successive authorization failures.
  If this command is properly authorized, the lockout counter is set to zero.

  @param[in]  LockHandle            TPM_RH_LOCKOUT
  @param[in]  AuthSession           Auth Session context
  @param[in]  NewMaxTries           Count of authorization failures before the lockout is imposed
  @param[in]  NewRecoveryTime       Time in seconds before the authorization failure count is automatically decremented
  @param[in]  LockoutRecovery       Time in seconds after a lockoutAuth failure before use of lockoutAuth is allowed

  @retval EFI_SUCCESS      Operation completed successfully.
  @retval EFI_DEVICE_ERROR Unexpected device behavior.
**/
EFI_STATUS
EFIAPI
Tpm2DictionaryAttackParameters (
  IN  TPMI_RH_LOCKOUT           LockHandle,
  IN  TPMS_AUTH_COMMAND         *AuthSession,
  IN  UINT32                    NewMaxTries,
  IN  UINT32                    NewRecoveryTime,
  IN  UINT32                    LockoutRecovery
  )
{
  EFI_STATUS                                 Status;
  TPM2_DICTIONARY_ATTACK_PARAMETERS_COMMAND  SendBuffer;
  TPM2_DICTIONARY_ATTACK_PARAMETERS_RESPONSE RecvBuffer;
  UINT32                                     SendBufferSize;
  UINT32                                     RecvBufferSize;
  UINT8                                      *Buffer;
  UINT32                                     SessionInfoSize;

  //
  // Construct command
  //
  SendBuffer.Header.tag = SwapBytes16(TPM_ST_SESSIONS);
  SendBuffer.Header.commandCode = SwapBytes32(TPM_CC_DictionaryAttackParameters);

  SendBuffer.LockHandle = SwapBytes32 (LockHandle);

  //
  // Add in Auth session
  //
  Buffer = (UINT8 *)&SendBuffer.AuthSession;

  // sessionInfoSize
  SessionInfoSize = CopyAuthSessionCommand (AuthSession, Buffer);
  Buffer += SessionInfoSize;
  SendBuffer.AuthSessionSize = SwapBytes32(SessionInfoSize);

  //
  // Real data
  //
  WriteUnaligned32 ((UINT32 *)Buffer, SwapBytes32(NewMaxTries));
  Buffer += sizeof(UINT32);
  WriteUnaligned32 ((UINT32 *)Buffer, SwapBytes32(NewRecoveryTime));
  Buffer += sizeof(UINT32);
  WriteUnaligned32 ((UINT32 *)Buffer, SwapBytes32(LockoutRecovery));
  Buffer += sizeof(UINT32);

  SendBufferSize = (UINT32)((UINTN)Buffer - (UINTN)&SendBuffer);
  SendBuffer.Header.paramSize = SwapBytes32 (SendBufferSize);

  //
  // send Tpm command
  //
  RecvBufferSize = sizeof (RecvBuffer);
  Status = Tpm2SubmitCommand (SendBufferSize, (UINT8 *)&SendBuffer, &RecvBufferSize, (UINT8 *)&RecvBuffer);
  if (EFI_ERROR (Status)) {
    goto Done;
  }

  if (RecvBufferSize < sizeof (TPM2_RESPONSE_HEADER)) {
    DEBUG ((EFI_D_ERROR, "Tpm2DictionaryAttackParameters - RecvBufferSize Error - %x\n", RecvBufferSize));
    Status = EFI_DEVICE_ERROR;
    goto Done;
  }
  if (SwapBytes32(RecvBuffer.Header.responseCode) != TPM_RC_SUCCESS) {
    DEBUG ((EFI_D_ERROR, "Tpm2DictionaryAttackParameters - responseCode - %x\n", SwapBytes32(RecvBuffer.Header.responseCode)));
    Status = EFI_DEVICE_ERROR;
    goto Done;
  }

Done:
  //
  // Clear AuthSession Content
  //
  ZeroMem (&SendBufferSize, sizeof(SendBufferSize));
  ZeroMem (&RecvBuffer, sizeof(RecvBuffer));
  return Status;
}