/** @file
* Header defining the BeagleBoard constants (Base addresses, sizes, flags)
*
* Copyright (c) 2011, ARM Limited. All rights reserved.
*
* This program and the accompanying materials
* are licensed and made available under the terms and conditions of the BSD License
* which accompanies this distribution. The full text of the license may be found at
* http://opensource.org/licenses/bsd-license.php
*
* THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
* WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
*
**/
#ifndef __BEAGLEBOARD_PLATFORM_H__
#define __BEAGLEBOARD_PLATFORM_H__
// DDR attributes
#define DDR_ATTRIBUTES_CACHED ARM_MEMORY_REGION_ATTRIBUTE_WRITE_BACK
#define DDR_ATTRIBUTES_UNCACHED ARM_MEMORY_REGION_ATTRIBUTE_UNCACHED_UNBUFFERED
// SoC registers. L3 interconnects
#define SOC_REGISTERS_L3_PHYSICAL_BASE 0x68000000
#define SOC_REGISTERS_L3_PHYSICAL_LENGTH 0x08000000
#define SOC_REGISTERS_L3_ATTRIBUTES ARM_MEMORY_REGION_ATTRIBUTE_DEVICE
// SoC registers. L4 interconnects
#define SOC_REGISTERS_L4_PHYSICAL_BASE 0x48000000
#define SOC_REGISTERS_L4_PHYSICAL_LENGTH 0x08000000
#define SOC_REGISTERS_L4_ATTRIBUTES ARM_MEMORY_REGION_ATTRIBUTE_DEVICE
#if 0
/*******************************************
// Platform Memory Map
*******************************************/
// Can be NOR, DOC, DRAM, SRAM
#define ARM_EB_REMAP_BASE 0x00000000
#define ARM_EB_REMAP_SZ 0x04000000
// Motherboard Peripheral and On-chip peripheral
#define ARM_EB_SMB_MB_ON_CHIP_PERIPH_BASE 0x10000000
#define ARM_EB_SMB_MB_ON_CHIP_PERIPH_SZ 0x00100000
#define ARM_EB_BOARD_PERIPH_BASE 0x10000000
//#define ARM_EB_CHIP_PERIPH_BASE 0x10020000
// SMC
#define ARM_EB_SMC_BASE 0x40000000
#define ARM_EB_SMC_SZ 0x20000000
// NOR Flash 1
#define ARM_EB_SMB_NOR_BASE 0x40000000
#define ARM_EB_SMB_NOR_SZ 0x04000000 /* 64 MB */
// DOC Flash
#define ARM_EB_SMB_DOC_BASE 0x44000000
#define ARM_EB_SMB_DOC_SZ 0x04000000 /* 64 MB */
// SRAM
#define ARM_EB_SMB_SRAM_BASE 0x48000000
#define ARM_EB_SMB_SRAM_SZ 0x02000000 /* 32 MB */
// USB, Ethernet, VRAM
#define ARM_EB_SMB_PERIPH_BASE 0x4E000000
//#define ARM_EB_SMB_PERIPH_VRAM 0x4C000000
#define ARM_EB_SMB_PERIPH_SZ 0x02000000 /* 32 MB */
// DRAM
#define ARM_EB_DRAM_BASE 0x70000000
#define ARM_EB_DRAM_SZ 0x10000000
// Logic Tile
#define ARM_EB_LOGIC_TILE_BASE 0xC0000000
#define ARM_EB_LOGIC_TILE_SZ 0x40000000
/*******************************************
// Motherboard peripherals
*******************************************/
// Define MotherBoard SYS flags offsets (from ARM_EB_BOARD_PERIPH_BASE)
#define ARM_EB_SYS_FLAGS_REG (ARM_EB_BOARD_PERIPH_BASE + 0x00030)
#define ARM_EB_SYS_FLAGS_SET_REG (ARM_EB_BOARD_PERIPH_BASE + 0x00030)
#define ARM_EB_SYS_FLAGS_CLR_REG (ARM_EB_BOARD_PERIPH_BASE + 0x00034)
#define ARM_EB_SYS_FLAGS_NV_REG (ARM_EB_BOARD_PERIPH_BASE + 0x00038)
#define ARM_EB_SYS_FLAGS_NV_SET_REG (ARM_EB_BOARD_PERIPH_BASE + 0x00038)
#define ARM_EB_SYS_FLAGS_NV_CLR_REG (ARM_EB_BOARD_PERIPH_BASE + 0x0003C)
#define ARM_EB_SYS_CLCD (ARM_EB_BOARD_PERIPH_BASE + 0x00050)
#define ARM_EB_SYS_PROCID0_REG (ARM_EB_BOARD_PERIPH_BASE + 0x00084)
#define ARM_EB_SYS_PROCID1_REG (ARM_EB_BOARD_PERIPH_BASE + 0x00088)
#define ARM_EB_SYS_CFGDATA_REG (ARM_EB_BOARD_PERIPH_BASE + 0x000A0)
#define ARM_EB_SYS_CFGCTRL_REG (ARM_EB_BOARD_PERIPH_BASE + 0x000A4)
#define ARM_EB_SYS_CFGSTAT_REG (ARM_EB_BOARD_PERIPH_BASE + 0x000A8)
// SP810 Controller
#define SP810_CTRL_BASE (ARM_EB_BOARD_PERIPH_BASE + 0x01000)
// SYSTRCL Register
#define ARM_EB_SYSCTRL 0x10001000
// Uart0
#define PL011_CONSOLE_UART_BASE (ARM_EB_BOARD_PERIPH_BASE + 0x09000)
#define PL011_CONSOLE_UART_SPEED 115200
// SP804 Timer Bases
#define SP804_TIMER0_BASE (ARM_EB_BOARD_PERIPH_BASE + 0x11000)
#define SP804_TIMER1_BASE (ARM_EB_BOARD_PERIPH_BASE + 0x11020)
#define SP804_TIMER2_BASE (ARM_EB_BOARD_PERIPH_BASE + 0x12000)
#define SP804_TIMER3_BASE (ARM_EB_BOARD_PERIPH_BASE + 0x12020)
// PL301 RTC
#define PL031_RTC_BASE (ARM_EB_BOARD_PERIPH_BASE + 0x17000)
// Dynamic Memory Controller Base
#define ARM_EB_DMC_BASE 0x10018000
// Static Memory Controller Base
#define ARM_EB_SMC_CTRL_BASE 0x10080000
#define PL111_CLCD_BASE 0x10020000
//TODO: FIXME ... Reserved the memory in UEFI !!! Otherwise risk of corruption
#define PL111_CLCD_VRAM_BASE 0x78000000
#define ARM_EB_SYS_OSCCLK4 0x1000001C
/*// System Configuration Controller register Base addresses
//#define ARM_EB_SYS_CFG_CTRL_BASE 0x100E2000
#define ARM_EB_SYS_CFGRW0_REG 0x100E2000
#define ARM_EB_SYS_CFGRW1_REG 0x100E2004
#define ARM_EB_SYS_CFGRW2_REG 0x100E2008
#define ARM_EB_CFGRW1_REMAP_NOR0 0
#define ARM_EB_CFGRW1_REMAP_NOR1 (1 << 28)
#define ARM_EB_CFGRW1_REMAP_EXT_AXI (1 << 29)
#define ARM_EB_CFGRW1_REMAP_DRAM (1 << 30)
// PL301 Fast AXI Base Address
#define ARM_EB_FAXI_BASE 0x100E9000
// L2x0 Cache Controller Base Address
//#define ARM_EB_L2x0_CTLR_BASE 0x1E00A000*/
// PL031 RTC - Other settings
#define PL031_PPM_ACCURACY 300000000
/*******************************************
// Interrupt Map
*******************************************/
// Timer Interrupts
#define TIMER01_INTERRUPT_NUM 34
#define TIMER23_INTERRUPT_NUM 35
/*******************************************
// EFI Memory Map in Permanent Memory (DRAM)
*******************************************/
// This region is allocated at the bottom of the DRAM. It will be used
// for fixed address allocations such as Vector Table
#define ARM_EB_EFI_FIX_ADDRESS_REGION_SZ SIZE_8MB
// This region is the memory declared to PEI as permanent memory for PEI
// and DXE. EFI stacks and heaps will be declared in this region.
#define ARM_EB_EFI_MEMORY_REGION_SZ 0x1000000
#endif
typedef enum {
REVISION_XM,
REVISION_UNKNOWN0,
REVISION_UNKNOWN1,
REVISION_UNKNOWN2,
REVISION_UNKNOWN3,
REVISION_C4,
REVISION_C123,
REVISION_AB,
} BEAGLEBOARD_REVISION;
#endif