@REM @file
@REM This stand-alone program is typically called by the edksetup.bat file,
@REM however it may be executed directly from the BaseTools project folder
@REM if the file is not executed within a WORKSPACE\BaseTools folder.
@REM
@REM Copyright (c) 2006 - 2017, Intel Corporation. All rights reserved.<BR>
@REM (C) Copyright 2016 Hewlett Packard Enterprise Development LP<BR>
@REM
@REM This program and the accompanying materials are licensed and made available
@REM under the terms and conditions of the BSD License which accompanies this
@REM distribution. The full text of the license may be found at:
@REM http://opensource.org/licenses/bsd-license.php
@REM
@REM THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
@REM WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR
@REM IMPLIED.
@REM
@echo off
pushd .
@REM ##############################################################
@REM # You should not have to modify anything below this line
@REM #
if /I "%1"=="-h" goto Usage
if /I "%1"=="-help" goto Usage
if /I "%1"=="--help" goto Usage
if /I "%1"=="/h" goto Usage
if /I "%1"=="/help" goto Usage
if /I "%1"=="/?" goto Usage
:loop
if "%1"=="" goto setup_workspace
if /I "%1"=="--nt32" (
if /I "%2" == "X64" (
shift
)
@REM Ignore --nt32 flag
shift
goto loop
)
if /I "%1"=="Reconfig" (
shift
set RECONFIG=TRUE
goto loop
)
if /I "%1"=="Rebuild" (
shift
set REBUILD=TRUE
goto loop
)
if /I "%1"=="ForceRebuild" (
shift
set FORCE_REBUILD=TRUE
goto loop
)
if "%1"=="" goto setup_workspace
if exist %1 (
if not defined BASE_TOOLS_PATH (
if exist %1\Source set BASE_TOOLS_PATH=%1
shift
goto loop
)
if not defined EDK_TOOLS_PATH (
if exist %1\Bin\Win32 set EDK_TOOLS_PATH=%1
shift
goto loop
)
echo.
echo !!! ERROR !!! Unknown argument, %1 !!!
echo.
goto end
) else (
echo.
echo !!! ERROR !!! Unknown argument, %1 !!!
echo.
goto end
)
goto loop
@REM
@REM Check the required system environment variables
@REM
:setup_workspace
REM
REM check the EDK_TOOLS_PATH
REM
if not defined EDK_TOOLS_PATH goto no_EDK_TOOLS_PATH
if exist %EDK_TOOLS_PATH% goto set_PATH
:no_EDK_TOOLS_PATH
if not defined WORKSPACE (
if defined BASE_TOOLS_PATH (
set EDK_TOOLS_PATH=%BASE_TOOLS_PATH%
goto set_PATH
) else (
echo.
echo !!! ERROR !!! Neither BASE_TOOLS_PATH nor EDK_TOOLS_PATH are set. !!!
echo.
goto end
)
) else (
if exist %WORKSPACE%\BaseTools\Bin (
set EDK_TOOLS_PATH=%WORKSPACE%\BaseTools
goto set_PATH
) else (
echo.
echo !!! ERROR !!! No tools path available. Please set EDK_TOOLS_PATH !!!
echo.
goto end
)
)
:set_PATH
if defined WORKSPACE_TOOLS_PATH goto check_PATH
if not defined EDK_TOOLS_BIN (
if exist %EDK_TOOLS_PATH%\Bin\Win32 (
set EDK_TOOLS_BIN=%EDK_TOOLS_PATH%\Bin\Win32
) else (
set "PATH=%EDK_TOOLS_PATH%\Bin\Win32;%PATH%"
echo.
echo !!! ERROR !!! Cannot find BaseTools Bin Win32!!!
echo Please check the directory %EDK_TOOLS_PATH%\Bin\Win32
echo Or configure EDK_TOOLS_BIN env to point Win32 directory.
echo.
goto check_build_environment
)
)
set PATH=%EDK_TOOLS_BIN%;%PATH%
set WORKSPACE_TOOLS_PATH=%EDK_TOOLS_PATH%
goto PATH_ok
:check_PATH
if "%EDK_TOOLS_PATH%"=="%WORKSPACE_TOOLS_PATH%" goto PATH_ok
if not defined EDK_TOOLS_BIN (
if exist %EDK_TOOLS_PATH%\Bin\Win32 (
set EDK_TOOLS_BIN=%EDK_TOOLS_PATH%\Bin\Win32
) else (
set "PATH=%EDK_TOOLS_PATH%\Bin\Win32;%PATH%"
echo.
echo !!! ERROR !!! Cannot find BaseTools Bin Win32!!!
echo Please check the directory %EDK_TOOLS_PATH%\Bin\Win32
echo Or configure EDK_TOOLS_BIN env to point Win32 directory.
echo.
goto check_build_environment
)
)
set PATH=%EDK_TOOLS_BIN%;%PATH%
set WORKSPACE_TOOLS_PATH=%EDK_TOOLS_PATH%
echo Resetting the PATH variable to include the EDK_TOOLS_PATH for this session.
:PATH_ok
REM
REM copy *.template to %CONF_PATH%
REM
if not defined WORKSPACE (
if defined RECONFIG (
echo.
echo !!! WARNING !!! WORKSPACE environment variable was not set, cannot Reconfig !!!
echo.
)
goto skip_reconfig
)
IF NOT exist "%EDK_TOOLS_PATH%\set_vsprefix_envs.bat" (
@echo.
@echo !!! ERROR !!! The set_vsprefix_envs.bat was not found !!!
@echo.
goto end
)
call %EDK_TOOLS_PATH%\set_vsprefix_envs.bat
if not defined CONF_PATH (
set CONF_PATH=%WORKSPACE%\Conf
)
if NOT exist %CONF_PATH% (
if defined PACKAGES_PATH (
for %%i IN (%PACKAGES_PATH%) DO (
if exist %%~fi\Conf (
set CONF_PATH=%%i\Conf
goto CopyConf
)
)
)
)
:CopyConf
if NOT exist %CONF_PATH% (
mkdir %CONF_PATH%
) else (
if defined RECONFIG (
echo.
echo Over-writing the files in the CONF_PATH directory
echo using the default template files
echo.
)
)
if NOT exist %CONF_PATH%\target.txt (
echo copying ... target.template to %CONF_PATH%\target.txt
if NOT exist %EDK_TOOLS_PATH%\Conf\target.template (
echo Error: target.template is missing at folder %EDK_TOOLS_PATH%\Conf\
)
copy %EDK_TOOLS_PATH%\Conf\target.template %CONF_PATH%\target.txt > nul
) else (
if defined RECONFIG echo over-write ... target.template to %CONF_PATH%\target.txt
if defined RECONFIG copy /Y %EDK_TOOLS_PATH%\Conf\target.template %CONF_PATH%\target.txt > nul
)
if NOT exist %CONF_PATH%\tools_def.txt (
echo copying ... tools_def.template to %CONF_PATH%\tools_def.txt
if NOT exist %EDK_TOOLS_PATH%\Conf\tools_def.template (
echo Error: tools_def.template is missing at folder %EDK_TOOLS_PATH%\Conf\
)
copy %EDK_TOOLS_PATH%\Conf\tools_def.template %CONF_PATH%\tools_def.txt > nul
) else (
if defined RECONFIG echo over-write ... tools_def.template to %CONF_PATH%\tools_def.txt
if defined RECONFIG copy /Y %EDK_TOOLS_PATH%\Conf\tools_def.template %CONF_PATH%\tools_def.txt > nul
)
if NOT exist %CONF_PATH%\build_rule.txt (
echo copying ... build_rule.template to %CONF_PATH%\build_rule.txt
if NOT exist %EDK_TOOLS_PATH%\Conf\build_rule.template (
echo Error: build_rule.template is missing at folder %EDK_TOOLS_PATH%\Conf\
)
copy %EDK_TOOLS_PATH%\Conf\build_rule.template %CONF_PATH%\build_rule.txt > nul
) else (
if defined RECONFIG echo over-write ... build_rule.template to %CONF_PATH%\build_rule.txt
if defined RECONFIG copy /Y %EDK_TOOLS_PATH%\Conf\build_rule.template %CONF_PATH%\build_rule.txt > nul
)
echo PATH = %PATH%
echo.
if defined WORKSPACE (
echo WORKSPACE = %WORKSPACE%
)
if defined PACKAGES_PATH (
echo PACKAGES_PATH = %PACKAGES_PATH%
)
echo EDK_TOOLS_PATH = %EDK_TOOLS_PATH%
if defined BASE_TOOLS_PATH (
echo BASE_TOOLS_PATH = %BASE_TOOLS_PATH%
)
if defined EDK_TOOLS_BIN (
echo EDK_TOOLS_BIN = %EDK_TOOLS_BIN%
)
echo CONF_PATH = %CONF_PATH%
echo.
:skip_reconfig
@REM
@REM Test if we are going to have to do a build
@REM
if defined FORCE_REBUILD goto check_build_environment
if defined REBUILD goto check_build_environment
if not exist "%EDK_TOOLS_PATH%" goto check_build_environment
IF NOT EXIST "%EDK_TOOLS_BIN%\BootSectImage.exe" goto check_c_tools
IF NOT EXIST "%EDK_TOOLS_BIN%\EfiLdrImage.exe" goto check_c_tools
IF NOT EXIST "%EDK_TOOLS_BIN%\EfiRom.exe" goto check_c_tools
IF NOT EXIST "%EDK_TOOLS_BIN%\GenBootSector.exe" goto check_c_tools
IF NOT EXIST "%EDK_TOOLS_BIN%\GenFfs.exe" goto check_c_tools
IF NOT EXIST "%EDK_TOOLS_BIN%\GenFv.exe" goto check_c_tools
IF NOT EXIST "%EDK_TOOLS_BIN%\GenFw.exe" goto check_c_tools
IF NOT EXIST "%EDK_TOOLS_BIN%\GenPage.exe" goto check_c_tools
IF NOT EXIST "%EDK_TOOLS_BIN%\GenSec.exe" goto check_c_tools
IF NOT EXIST "%EDK_TOOLS_BIN%\GenVtf.exe" goto check_c_tools
IF NOT EXIST "%EDK_TOOLS_BIN%\Split.exe" goto check_c_tools
IF NOT EXIST "%EDK_TOOLS_BIN%\TianoCompress.exe" goto check_c_tools
IF NOT EXIST "%EDK_TOOLS_BIN%\VfrCompile.exe" goto check_c_tools
IF NOT EXIST "%EDK_TOOLS_BIN%\VolInfo.exe" goto check_c_tools
goto check_python_tools
:check_c_tools
echo.
echo !!! ERROR !!! Binary C tools are missing. They are requried to be built from BaseTools Source.
echo.
goto check_build_environment
:check_python_tools
IF NOT EXIST "%EDK_TOOLS_BIN%\build.exe" goto check_build_environment
IF NOT EXIST "%EDK_TOOLS_BIN%\GenFds.exe" goto check_build_environment
IF NOT EXIST "%EDK_TOOLS_BIN%\TargetTool.exe" goto check_build_environment
IF NOT EXIST "%EDK_TOOLS_BIN%\Trim.exe" goto check_build_environment
goto end
:check_build_environment
if defined BASETOOLS_PYTHON_SOURCE goto VisualStudioAvailable
if not defined BASE_TOOLS_PATH (
if not exist "Source\C\Makefile" (
if not exist "%EDK_TOOLS_PATH%\Source\C\Makefile" goto no_source_files
set BASE_TOOLS_PATH=%EDK_TOOLS_PATH%
) else (
set BASE_TOOLS_PATH=%CD%
)
)
if not defined PYTHON_HOME (
if defined PYTHONHOME (
set PYTHON_HOME=%PYTHONHOME%
) else (
echo.
echo !!! ERROR !!! Binary python tools are missing. PYTHON_HOME environment variable is not set.
echo PYTHON_HOME is required to build or execute the python tools.
echo.
goto end
)
)
@REM We have Python, now test for FreezePython application
if not defined PYTHON_FREEZER_PATH (
echo.
echo !!! WARNING !!! PYTHON_FREEZER_PATH environment variable is not set.
echo Setup environment to run Python scripts directly.
echo.
set "PATH=%PATH%;%BASE_TOOLS_PATH%\BinWrappers\WindowsLike"
)
set BASETOOLS_PYTHON_SOURCE=%BASE_TOOLS_PATH%\Source\Python
set PYTHONPATH=%BASETOOLS_PYTHON_SOURCE%;%PYTHONPATH%
echo PATH = %PATH%
echo PYTHON_HOME = %PYTHON_HOME%
echo PYTHONPATH = %PYTHONPATH%
if defined PYTHON_FREEZER_PATH (
echo PYTHON_FREEZER_PATH = %PYTHON_FREEZER_PATH%
)
echo.
:VisualStudioAvailable
if not defined FORCE_REBUILD (
if not defined REBUILD (
goto end
)
)
call "%EDK_TOOLS_PATH%\get_vsvars.bat"
if not defined VCINSTALLDIR (
@echo.
@echo !!! ERROR !!!! Cannot find Visual Studio, required to build C tools !!!
@echo.
goto end
)
if not defined FORCE_REBUILD goto IncrementalBuild
:CleanAndBuild
pushd .
cd %BASE_TOOLS_PATH%
call nmake cleanall
del /f /q %BASE_TOOLS_PATH%\Bin\Win32\*.*
popd
@REM Let CleanAndBuild fall through to IncrementalBuild
:IncrementalBuild
pushd .
cd %BASE_TOOLS_PATH%
call nmake c
popd
if defined PYTHON_FREEZER_PATH (
echo BUILDING PYTHON TOOLS
pushd .
cd %BASE_TOOLS_PATH%
call nmake python
popd
) else (
echo.
echo !!! WARNING !!! Cannot make executable from Python code, executing python scripts instead !!!
echo.
)
goto end
:no_source_files
echo.
echo !!! ERROR !!! Cannot build BaseTools applications - no source directory located !!!
echo.
goto end
:Usage
@echo.
echo Usage: "%0 [-h | -help | --help | /h | /help | /?] [ Rebuild | ForceRebuild ] [Reconfig] [base_tools_path [edk_tools_path]]"
@echo.
@echo base_tools_path BaseTools project path, BASE_TOOLS_PATH will be set to this path.
@echo edk_tools_path EDK_TOOLS_PATH will be set to this path.
@echo Rebuild If sources are available perform an Incremental build, only
@echo build those updated tools.
@echo ForceRebuild If sources are available, rebuild all tools regardless of
@echo whether they have been updated or not.
@echo Reconfig Reinstall target.txt, tools_def.txt and build_rule.txt.
@echo.
:end
set REBUILD=
set FORCE_REBUILD=
set RECONFIG=
popd