/** @file
Creates output file that is a properly formed section per the PI spec.
Copyright (c) 2004 - 2016, Intel Corporation. All rights reserved.<BR>
This program and the accompanying materials
are licensed and made available under the terms and conditions of the BSD License
which accompanies this distribution. The full text of the license may be found at
http://opensource.org/licenses/bsd-license.php
THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
**/
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <ctype.h>
#include <Common/UefiBaseTypes.h>
#include <Common/PiFirmwareFile.h>
#include <Protocol/GuidedSectionExtraction.h>
#include <IndustryStandard/PeImage.h>
#include "CommonLib.h"
#include "Compress.h"
#include "Crc32.h"
#include "EfiUtilityMsgs.h"
#include "ParseInf.h"
//
// GenSec Tool Information
//
#define UTILITY_NAME "GenSec"
#define UTILITY_MAJOR_VERSION 0
#define UTILITY_MINOR_VERSION 1
STATIC CHAR8 *mSectionTypeName[] = {
NULL, // 0x00 - reserved
"EFI_SECTION_COMPRESSION", // 0x01
"EFI_SECTION_GUID_DEFINED", // 0x02
NULL, // 0x03 - reserved
NULL, // 0x04 - reserved
NULL, // 0x05 - reserved
NULL, // 0x06 - reserved
NULL, // 0x07 - reserved
NULL, // 0x08 - reserved
NULL, // 0x09 - reserved
NULL, // 0x0A - reserved
NULL, // 0x0B - reserved
NULL, // 0x0C - reserved
NULL, // 0x0D - reserved
NULL, // 0x0E - reserved
NULL, // 0x0F - reserved
"EFI_SECTION_PE32", // 0x10
"EFI_SECTION_PIC", // 0x11
"EFI_SECTION_TE", // 0x12
"EFI_SECTION_DXE_DEPEX", // 0x13
"EFI_SECTION_VERSION", // 0x14
"EFI_SECTION_USER_INTERFACE", // 0x15
"EFI_SECTION_COMPATIBILITY16", // 0x16
"EFI_SECTION_FIRMWARE_VOLUME_IMAGE", // 0x17
"EFI_SECTION_FREEFORM_SUBTYPE_GUID", // 0x18
"EFI_SECTION_RAW", // 0x19
NULL, // 0x1A
"EFI_SECTION_PEI_DEPEX", // 0x1B
"EFI_SECTION_SMM_DEPEX" // 0x1C
};
STATIC CHAR8 *mCompressionTypeName[] = { "PI_NONE", "PI_STD" };
#define EFI_GUIDED_SECTION_NONE 0x80
STATIC CHAR8 *mGUIDedSectionAttribue[] = { "NONE", "PROCESSING_REQUIRED", "AUTH_STATUS_VALID"};
STATIC CHAR8 *mAlignName[] = {
"1", "2", "4", "8", "16", "32", "64", "128", "256", "512",
"1K", "2K", "4K", "8K", "16K", "32K", "64K"
};
//
// Crc32 GUID section related definitions.
//
typedef struct {
EFI_GUID_DEFINED_SECTION GuidSectionHeader;
UINT32 CRC32Checksum;
} CRC32_SECTION_HEADER;
typedef struct {
EFI_GUID_DEFINED_SECTION2 GuidSectionHeader;
UINT32 CRC32Checksum;
} CRC32_SECTION_HEADER2;
STATIC EFI_GUID mZeroGuid = {0x0, 0x0, 0x0, {0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0}};
STATIC EFI_GUID mEfiCrc32SectionGuid = EFI_CRC32_GUIDED_SECTION_EXTRACTION_PROTOCOL_GUID;
STATIC
VOID
Version (
VOID
)
/*++
Routine Description:
Print out version information for this utility.
Arguments:
None
Returns:
None
--*/
{
fprintf (stdout, "%s Version %d.%d %s \n", UTILITY_NAME, UTILITY_MAJOR_VERSION, UTILITY_MINOR_VERSION, __BUILD_VERSION);
}
STATIC
VOID
Usage (
VOID
)
/*++
Routine Description:
Print Help message.
Arguments:
VOID
Returns:
None
--*/
{
//
// Summary usage
//
fprintf (stdout, "\nUsage: %s [options] [input_file]\n\n", UTILITY_NAME);
//
// Copyright declaration
//
fprintf (stdout, "Copyright (c) 2007 - 2014, Intel Corporation. All rights reserved.\n\n");
//
// Details Option
//
fprintf (stdout, "Options:\n");
fprintf (stdout, " -o FileName, --outputfile FileName\n\
File is the SectionFile to be created.\n");
fprintf (stdout, " -s [SectionType], --sectiontype [SectionType]\n\
SectionType defined in PI spec is one type of\n\
EFI_SECTION_COMPRESSION, EFI_SECTION_GUID_DEFINED,\n\
EFI_SECTION_PE32, EFI_SECTION_PIC, EFI_SECTION_TE,\n\
EFI_SECTION_DXE_DEPEX, EFI_SECTION_COMPATIBILITY16,\n\
EFI_SECTION_USER_INTERFACE, EFI_SECTION_VERSION,\n\
EFI_SECTION_FIRMWARE_VOLUME_IMAGE, EFI_SECTION_RAW,\n\
EFI_SECTION_FREEFORM_SUBTYPE_GUID,\n\
EFI_SECTION_PEI_DEPEX, EFI_SECTION_SMM_DEPEX.\n\
if -s option is not given, \n\
EFI_SECTION_ALL is default section type.\n");
fprintf (stdout, " -c [Type], --compress [Type]\n\
Compress method type can be PI_NONE or PI_STD.\n\
if -c option is not given, PI_STD is default type.\n");
fprintf (stdout, " -g GuidValue, --vendor GuidValue\n\
GuidValue is one specific vendor guid value.\n\
Its format is xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx\n");
fprintf (stdout, " -l GuidHeaderLength, --HeaderLength GuidHeaderLength\n\
GuidHeaderLength is the size of header of guided data\n");
fprintf (stdout, " -r GuidAttr, --attributes GuidAttr\n\
GuidAttr is guid section atttributes, which may be\n\
PROCESSING_REQUIRED, AUTH_STATUS_VALID and NONE. \n\
if -r option is not given, default PROCESSING_REQUIRED\n");
fprintf (stdout, " -n String, --name String\n\
String is a NULL terminated string used in Ui section.\n");
fprintf (stdout, " -j Number, --buildnumber Number\n\
Number is an integer value between 0 and 65535\n\
used in Ver section.\n");
fprintf (stdout, " --sectionalign SectionAlign\n\
SectionAlign points to section alignment, which support\n\
the alignment scope 1~64K. It is specified in same\n\
order that the section file is input.\n");
fprintf (stdout, " -v, --verbose Turn on verbose output with informational messages.\n");
fprintf (stdout, " -q, --quiet Disable all messages except key message and fatal error\n");
fprintf (stdout, " -d, --debug level Enable debug messages, at input debug level.\n");
fprintf (stdout, " --version Show program's version number and exit.\n");
fprintf (stdout, " -h, --help Show this help message and exit.\n");
}
VOID
Ascii2UnicodeString (
CHAR8 *String,
CHAR16 *UniString
)
/*++
Routine Description:
Write ascii string as unicode string format to FILE
Arguments:
String - Pointer to string that is written to FILE.
UniString - Pointer to unicode string
Returns:
NULL
--*/
{
while (*String != '\0') {
*(UniString++) = (CHAR16) *(String++);
}
//
// End the UniString with a NULL.
//
*UniString = '\0';
}
STATUS
GenSectionCommonLeafSection (
CHAR8 **InputFileName,
UINT32 InputFileNum,
UINT8 SectionType,
UINT8 **OutFileBuffer
)
/*++
Routine Description:
Generate a leaf section of type other than EFI_SECTION_VERSION
and EFI_SECTION_USER_INTERFACE. Input file must be well formed.
The function won't validate the input file's contents. For
common leaf sections, the input file may be a binary file.
The utility will add section header to the file.
Arguments:
InputFileName - Name of the input file.
InputFileNum - Number of input files. Should be 1 for leaf section.
SectionType - A valid section type string
OutFileBuffer - Buffer pointer to Output file contents
Returns:
STATUS_ERROR - can't continue
STATUS_SUCCESS - successful return
--*/
{
UINT32 InputFileLength;
FILE *InFile;
UINT8 *Buffer;
UINT32 TotalLength;
UINT32 HeaderLength;
EFI_COMMON_SECTION_HEADER *CommonSect;
STATUS Status;
if (InputFileNum > 1) {
Error (NULL, 0, 2000, "Invalid parameter", "more than one input file specified");
return STATUS_ERROR;
} else if (InputFileNum < 1) {
Error (NULL, 0, 2000, "Invalid parameter", "no input file specified");
return STATUS_ERROR;
}
//
// Open the input file
//
InFile = fopen (LongFilePath (InputFileName[0]), "rb");
if (InFile == NULL) {
Error (NULL, 0, 0001, "Error opening file", InputFileName[0]);
return STATUS_ERROR;
}
Status = STATUS_ERROR;
Buffer = NULL;
//
// Seek to the end of the input file so we can determine its size
//
fseek (InFile, 0, SEEK_END);
InputFileLength = ftell (InFile);
fseek (InFile, 0, SEEK_SET);
DebugMsg (NULL, 0, 9, "Input file", "File name is %s and File size is %u bytes", InputFileName[0], (unsigned) InputFileLength);
TotalLength = sizeof (EFI_COMMON_SECTION_HEADER) + InputFileLength;
//
// Size must fit in 3 bytes
//
//if (TotalLength >= MAX_SECTION_SIZE) {
// Error (NULL, 0, 2000, "Invalid parameter", "%s file size (0x%X) exceeds section size limit(%uM).", InputFileName[0], (unsigned) TotalLength, MAX_SECTION_SIZE>>20);
// goto Done;
//}
HeaderLength = sizeof (EFI_COMMON_SECTION_HEADER);
if (TotalLength >= MAX_SECTION_SIZE) {
TotalLength = sizeof (EFI_COMMON_SECTION_HEADER2) + InputFileLength;
HeaderLength = sizeof (EFI_COMMON_SECTION_HEADER2);
}
VerboseMsg ("the size of the created section file is %u bytes", (unsigned) TotalLength);
//
// Fill in the fields in the local section header structure
//
Buffer = (UINT8 *) malloc ((size_t) TotalLength);
if (Buffer == NULL) {
Error (NULL, 0, 4001, "Resource", "memory cannot be allcoated");
goto Done;
}
CommonSect = (EFI_COMMON_SECTION_HEADER *) Buffer;
CommonSect->Type = SectionType;
if (TotalLength < MAX_SECTION_SIZE) {
CommonSect->Size[0] = (UINT8) (TotalLength & 0xff);
CommonSect->Size[1] = (UINT8) ((TotalLength & 0xff00) >> 8);
CommonSect->Size[2] = (UINT8) ((TotalLength & 0xff0000) >> 16);
} else {
memset(CommonSect->Size, 0xff, sizeof(UINT8) * 3);
((EFI_COMMON_SECTION_HEADER2 *)CommonSect)->ExtendedSize = TotalLength;
}
//
// read data from the input file.
//
if (InputFileLength != 0) {
if (fread (Buffer + HeaderLength, (size_t) InputFileLength, 1, InFile) != 1) {
Error (NULL, 0, 0004, "Error reading file", InputFileName[0]);
goto Done;
}
}
//
// Set OutFileBuffer
//
*OutFileBuffer = Buffer;
Status = STATUS_SUCCESS;
Done:
fclose (InFile);
return Status;
}
STATIC
EFI_STATUS
StringtoAlignment (
IN CHAR8 *AlignBuffer,
OUT UINT32 *AlignNumber
)
/*++
Routine Description:
Converts Align String to align value (1~64K).
Arguments:
AlignBuffer - Pointer to Align string.
AlignNumber - Pointer to Align value.
Returns:
EFI_SUCCESS Successfully convert align string to align value.
EFI_INVALID_PARAMETER Align string is invalid or align value is not in scope.
--*/
{
UINT32 Index = 0;
//
// Check AlignBuffer
//
if (AlignBuffer == NULL) {
return EFI_INVALID_PARAMETER;
}
for (Index = 0; Index < sizeof (mAlignName) / sizeof (CHAR8 *); Index ++) {
if (stricmp (AlignBuffer, mAlignName [Index]) == 0) {
*AlignNumber = 1 << Index;
return EFI_SUCCESS;
}
}
return EFI_INVALID_PARAMETER;
}
EFI_STATUS
GetSectionContents (
CHAR8 **InputFileName,
UINT32 *InputFileAlign,
UINT32 InputFileNum,
UINT8 *FileBuffer,
UINT32 *BufferLength
)
/*++
Routine Description:
Get the contents of all section files specified in InputFileName
into FileBuffer.
Arguments:
InputFileName - Name of the input file.
InputFileAlign - Alignment required by the input file data.
InputFileNum - Number of input files. Should be at least 1.
FileBuffer - Output buffer to contain data
BufferLength - On input, this is size of the FileBuffer.
On output, this is the actual length of the data.
Returns:
EFI_SUCCESS on successful return
EFI_INVALID_PARAMETER if InputFileNum is less than 1 or BufferLength point is NULL.
EFI_ABORTED if unable to open input file.
EFI_BUFFER_TOO_SMALL FileBuffer is not enough to contain all file data.
--*/
{
UINT32 Size;
UINT32 Offset;
UINT32 FileSize;
UINT32 Index;
FILE *InFile;
EFI_COMMON_SECTION_HEADER *SectHeader;
EFI_COMMON_SECTION_HEADER2 TempSectHeader;
EFI_TE_IMAGE_HEADER TeHeader;
UINT32 TeOffset;
EFI_GUID_DEFINED_SECTION GuidSectHeader;
EFI_GUID_DEFINED_SECTION2 GuidSectHeader2;
UINT32 HeaderSize;
if (InputFileNum < 1) {
Error (NULL, 0, 2000, "Invalid parameter", "must specify at least one input file");
return EFI_INVALID_PARAMETER;
}
if (BufferLength == NULL) {
Error (NULL, 0, 2000, "Invalid parameter", "BufferLength can't be NULL");
return EFI_INVALID_PARAMETER;
}
Size = 0;
Offset = 0;
TeOffset = 0;
//
// Go through our array of file names and copy their contents
// to the output buffer.
//
for (Index = 0; Index < InputFileNum; Index++) {
//
// make sure section ends on a DWORD boundary
//
while ((Size & 0x03) != 0) {
if (FileBuffer != NULL && Size < *BufferLength) {
FileBuffer[Size] = 0;
}
Size++;
}
//
// Open file and read contents
//
InFile = fopen (LongFilePath (InputFileName[Index]), "rb");
if (InFile == NULL) {
Error (NULL, 0, 0001, "Error opening file", InputFileName[Index]);
return EFI_ABORTED;
}
fseek (InFile, 0, SEEK_END);
FileSize = ftell (InFile);
fseek (InFile, 0, SEEK_SET);
DebugMsg (NULL, 0, 9, "Input files", "the input file name is %s and the size is %u bytes", InputFileName[Index], (unsigned) FileSize);
//
// Adjust section buffer when section alignment is required.
//
if (InputFileAlign != NULL) {
//
// Check this section is Te/Pe section, and Calculate the numbers of Te/Pe section.
//
TeOffset = 0;
//
// The section might be EFI_COMMON_SECTION_HEADER2
// But only Type needs to be checked
//
if (FileSize >= MAX_SECTION_SIZE) {
HeaderSize = sizeof (EFI_COMMON_SECTION_HEADER2);
} else {
HeaderSize = sizeof (EFI_COMMON_SECTION_HEADER);
}
fread (&TempSectHeader, 1, HeaderSize, InFile);
if (TempSectHeader.Type == EFI_SECTION_TE) {
fread (&TeHeader, 1, sizeof (TeHeader), InFile);
if (TeHeader.Signature == EFI_TE_IMAGE_HEADER_SIGNATURE) {
TeOffset = TeHeader.StrippedSize - sizeof (TeHeader);
}
} else if (TempSectHeader.Type == EFI_SECTION_GUID_DEFINED) {
fseek (InFile, 0, SEEK_SET);
if (FileSize >= MAX_SECTION_SIZE) {
fread (&GuidSectHeader2, 1, sizeof (GuidSectHeader2), InFile);
if ((GuidSectHeader2.Attributes & EFI_GUIDED_SECTION_PROCESSING_REQUIRED) == 0) {
HeaderSize = GuidSectHeader2.DataOffset;
}
} else {
fread (&GuidSectHeader, 1, sizeof (GuidSectHeader), InFile);
if ((GuidSectHeader.Attributes & EFI_GUIDED_SECTION_PROCESSING_REQUIRED) == 0) {
HeaderSize = GuidSectHeader.DataOffset;
}
}
}
fseek (InFile, 0, SEEK_SET);
//
// Revert TeOffset to the converse value relative to Alignment
// This is to assure the original PeImage Header at Alignment.
//
if (TeOffset != 0) {
TeOffset = InputFileAlign [Index] - (TeOffset % InputFileAlign [Index]);
TeOffset = TeOffset % InputFileAlign [Index];
}
//
// make sure section data meet its alignment requirement by adding one raw pad section.
//
if ((InputFileAlign [Index] != 0) && (((Size + HeaderSize + TeOffset) % InputFileAlign [Index]) != 0)) {
Offset = (Size + sizeof (EFI_COMMON_SECTION_HEADER) + HeaderSize + TeOffset + InputFileAlign [Index] - 1) & ~(InputFileAlign [Index] - 1);
Offset = Offset - Size - HeaderSize - TeOffset;
if (FileBuffer != NULL && ((Size + Offset) < *BufferLength)) {
//
// The maximal alignment is 64K, the raw section size must be less than 0xffffff
//
memset (FileBuffer + Size, 0, Offset);
SectHeader = (EFI_COMMON_SECTION_HEADER *) (FileBuffer + Size);
SectHeader->Type = EFI_SECTION_RAW;
SectHeader->Size[0] = (UINT8) (Offset & 0xff);
SectHeader->Size[1] = (UINT8) ((Offset & 0xff00) >> 8);
SectHeader->Size[2] = (UINT8) ((Offset & 0xff0000) >> 16);
}
DebugMsg (NULL, 0, 9, "Pad raw section for section data alignment", "Pad Raw section size is %u", (unsigned) Offset);
Size = Size + Offset;
}
}
//
// Now read the contents of the file into the buffer
// Buffer must be enough to contain the file content.
//
if ((FileSize > 0) && (FileBuffer != NULL) && ((Size + FileSize) <= *BufferLength)) {
if (fread (FileBuffer + Size, (size_t) FileSize, 1, InFile) != 1) {
Error (NULL, 0, 0004, "Error reading file", InputFileName[Index]);
fclose (InFile);
return EFI_ABORTED;
}
}
fclose (InFile);
Size += FileSize;
}
//
// Set the real required buffer size.
//
if (Size > *BufferLength) {
*BufferLength = Size;
return EFI_BUFFER_TOO_SMALL;
} else {
*BufferLength = Size;
return EFI_SUCCESS;
}
}
EFI_STATUS
GenSectionCompressionSection (
CHAR8 **InputFileName,
UINT32 *InputFileAlign,
UINT32 InputFileNum,
UINT8 SectCompSubType,
UINT8 **OutFileBuffer
)
/*++
Routine Description:
Generate an encapsulating section of type EFI_SECTION_COMPRESSION
Input file must be already sectioned. The function won't validate
the input files' contents. Caller should hand in files already
with section header.
Arguments:
InputFileName - Name of the input file.
InputFileAlign - Alignment required by the input file data.
InputFileNum - Number of input files. Should be at least 1.
SectCompSubType - Specify the compression algorithm requested.
OutFileBuffer - Buffer pointer to Output file contents
Returns:
EFI_SUCCESS on successful return
EFI_INVALID_PARAMETER if InputFileNum is less than 1
EFI_ABORTED if unable to open input file.
EFI_OUT_OF_RESOURCES No resource to complete the operation.
--*/
{
UINT32 TotalLength;
UINT32 InputLength;
UINT32 CompressedLength;
UINT32 HeaderLength;
UINT8 *FileBuffer;
UINT8 *OutputBuffer;
EFI_STATUS Status;
EFI_COMPRESSION_SECTION *CompressionSect;
EFI_COMPRESSION_SECTION2 *CompressionSect2;
COMPRESS_FUNCTION CompressFunction;
InputLength = 0;
FileBuffer = NULL;
OutputBuffer = NULL;
CompressedLength = 0;
TotalLength = 0;
//
// read all input file contents into a buffer
// first get the size of all file contents
//
Status = GetSectionContents (
InputFileName,
InputFileAlign,
InputFileNum,
FileBuffer,
&InputLength
);
if (Status == EFI_BUFFER_TOO_SMALL) {
FileBuffer = (UINT8 *) malloc (InputLength);
if (FileBuffer == NULL) {
Error (NULL, 0, 4001, "Resource", "memory cannot be allcoated");
return EFI_OUT_OF_RESOURCES;
}
//
// read all input file contents into a buffer
//
Status = GetSectionContents (
InputFileName,
InputFileAlign,
InputFileNum,
FileBuffer,
&InputLength
);
}
if (EFI_ERROR (Status)) {
if (FileBuffer != NULL) {
free (FileBuffer);
}
return Status;
}
if (FileBuffer == NULL) {
return EFI_OUT_OF_RESOURCES;
}
CompressFunction = NULL;
//
// Now data is in FileBuffer, compress the data
//
switch (SectCompSubType) {
case EFI_NOT_COMPRESSED:
CompressedLength = InputLength;
HeaderLength = sizeof (EFI_COMPRESSION_SECTION);
if (CompressedLength + HeaderLength >= MAX_SECTION_SIZE) {
HeaderLength = sizeof (EFI_COMPRESSION_SECTION2);
}
TotalLength = CompressedLength + HeaderLength;
//
// Copy file buffer to the none compressed data.
//
OutputBuffer = malloc (TotalLength);
if (OutputBuffer == NULL) {
free (FileBuffer);
return EFI_OUT_OF_RESOURCES;
}
memcpy (OutputBuffer + HeaderLength, FileBuffer, CompressedLength);
free (FileBuffer);
FileBuffer = OutputBuffer;
break;
case EFI_STANDARD_COMPRESSION:
CompressFunction = (COMPRESS_FUNCTION) EfiCompress;
break;
default:
Error (NULL, 0, 2000, "Invalid parameter", "unknown compression type");
free (FileBuffer);
return EFI_ABORTED;
}
if (CompressFunction != NULL) {
Status = CompressFunction (FileBuffer, InputLength, OutputBuffer, &CompressedLength);
if (Status == EFI_BUFFER_TOO_SMALL) {
HeaderLength = sizeof (EFI_COMPRESSION_SECTION);
if (CompressedLength + HeaderLength >= MAX_SECTION_SIZE) {
HeaderLength = sizeof (EFI_COMPRESSION_SECTION2);
}
TotalLength = CompressedLength + HeaderLength;
OutputBuffer = malloc (TotalLength);
if (!OutputBuffer) {
free (FileBuffer);
return EFI_OUT_OF_RESOURCES;
}
Status = CompressFunction (FileBuffer, InputLength, OutputBuffer + HeaderLength, &CompressedLength);
}
free (FileBuffer);
FileBuffer = OutputBuffer;
if (EFI_ERROR (Status)) {
if (FileBuffer != NULL) {
free (FileBuffer);
}
return Status;
}
if (FileBuffer == NULL) {
return EFI_OUT_OF_RESOURCES;
}
}
DebugMsg (NULL, 0, 9, "comprss file size",
"the original section size is %d bytes and the compressed section size is %u bytes", (unsigned) InputLength, (unsigned) CompressedLength);
//if (TotalLength >= MAX_SECTION_SIZE) {
// Error (NULL, 0, 2000, "Invalid parameter", "The size of all files exceeds section size limit(%uM).", MAX_SECTION_SIZE>>20);
// if (FileBuffer != NULL) {
// free (FileBuffer);
// }
// if (OutputBuffer != NULL) {
// free (OutputBuffer);
// }
// return STATUS_ERROR;
//}
VerboseMsg ("the size of the created section file is %u bytes", (unsigned) TotalLength);
//
// Add the section header for the compressed data
//
if (TotalLength >= MAX_SECTION_SIZE) {
CompressionSect2 = (EFI_COMPRESSION_SECTION2 *)FileBuffer;
memset(CompressionSect2->CommonHeader.Size, 0xff, sizeof(UINT8) * 3);
CompressionSect2->CommonHeader.Type = EFI_SECTION_COMPRESSION;
CompressionSect2->CommonHeader.ExtendedSize = TotalLength;
CompressionSect2->CompressionType = SectCompSubType;
CompressionSect2->UncompressedLength = InputLength;
} else {
CompressionSect = (EFI_COMPRESSION_SECTION *) FileBuffer;
CompressionSect->CommonHeader.Type = EFI_SECTION_COMPRESSION;
CompressionSect->CommonHeader.Size[0] = (UINT8) (TotalLength & 0xff);
CompressionSect->CommonHeader.Size[1] = (UINT8) ((TotalLength & 0xff00) >> 8);
CompressionSect->CommonHeader.Size[2] = (UINT8) ((TotalLength & 0xff0000) >> 16);
CompressionSect->CompressionType = SectCompSubType;
CompressionSect->UncompressedLength = InputLength;
}
//
// Set OutFileBuffer
//
*OutFileBuffer = FileBuffer;
return EFI_SUCCESS;
}
EFI_STATUS
GenSectionGuidDefinedSection (
CHAR8 **InputFileName,
UINT32 *InputFileAlign,
UINT32 InputFileNum,
EFI_GUID *VendorGuid,
UINT16 DataAttribute,
UINT32 DataHeaderSize,
UINT8 **OutFileBuffer
)
/*++
Routine Description:
Generate an encapsulating section of type EFI_SECTION_GUID_DEFINED
Input file must be already sectioned. The function won't validate
the input files' contents. Caller should hand in files already
with section header.
Arguments:
InputFileName - Name of the input file.
InputFileAlign - Alignment required by the input file data.
InputFileNum - Number of input files. Should be at least 1.
VendorGuid - Specify vendor guid value.
DataAttribute - Specify attribute for the vendor guid data.
DataHeaderSize- Guided Data Header Size
OutFileBuffer - Buffer pointer to Output file contents
Returns:
EFI_SUCCESS on successful return
EFI_INVALID_PARAMETER if InputFileNum is less than 1
EFI_ABORTED if unable to open input file.
EFI_OUT_OF_RESOURCES No resource to complete the operation.
--*/
{
UINT32 TotalLength;
UINT32 InputLength;
UINT32 Offset;
UINT8 *FileBuffer;
UINT32 Crc32Checksum;
EFI_STATUS Status;
CRC32_SECTION_HEADER *Crc32GuidSect;
CRC32_SECTION_HEADER2 *Crc32GuidSect2;
EFI_GUID_DEFINED_SECTION *VendorGuidSect;
EFI_GUID_DEFINED_SECTION2 *VendorGuidSect2;
InputLength = 0;
Offset = 0;
FileBuffer = NULL;
TotalLength = 0;
//
// read all input file contents into a buffer
// first get the size of all file contents
//
Status = GetSectionContents (
InputFileName,
InputFileAlign,
InputFileNum,
FileBuffer,
&InputLength
);
if (Status == EFI_BUFFER_TOO_SMALL) {
if (CompareGuid (VendorGuid, &mZeroGuid) == 0) {
Offset = sizeof (CRC32_SECTION_HEADER);
if (InputLength + Offset >= MAX_SECTION_SIZE) {
Offset = sizeof (CRC32_SECTION_HEADER2);
}
} else {
Offset = sizeof (EFI_GUID_DEFINED_SECTION);
if (InputLength + Offset >= MAX_SECTION_SIZE) {
Offset = sizeof (EFI_GUID_DEFINED_SECTION2);
}
}
TotalLength = InputLength + Offset;
FileBuffer = (UINT8 *) malloc (InputLength + Offset);
if (FileBuffer == NULL) {
Error (NULL, 0, 4001, "Resource", "memory cannot be allcoated");
return EFI_OUT_OF_RESOURCES;
}
//
// read all input file contents into a buffer
//
Status = GetSectionContents (
InputFileName,
InputFileAlign,
InputFileNum,
FileBuffer + Offset,
&InputLength
);
}
if (EFI_ERROR (Status)) {
if (FileBuffer != NULL) {
free (FileBuffer);
}
Error (NULL, 0, 0001, "Error opening file for reading", InputFileName[0]);
return Status;
}
if (InputLength == 0) {
if (FileBuffer != NULL) {
free (FileBuffer);
}
Error (NULL, 0, 2000, "Invalid parameter", "the size of input file %s can't be zero", InputFileName);
return EFI_NOT_FOUND;
}
//
// InputLength != 0, but FileBuffer == NULL means out of resources.
//
if (FileBuffer == NULL) {
Error (NULL, 0, 4001, "Resource", "memory cannot be allcoated");
return EFI_OUT_OF_RESOURCES;
}
//
// Now data is in FileBuffer + Offset
//
if (CompareGuid (VendorGuid, &mZeroGuid) == 0) {
//
// Default Guid section is CRC32.
//
Crc32Checksum = 0;
CalculateCrc32 (FileBuffer + Offset, InputLength, &Crc32Checksum);
if (TotalLength >= MAX_SECTION_SIZE) {
Crc32GuidSect2 = (CRC32_SECTION_HEADER2 *) FileBuffer;
Crc32GuidSect2->GuidSectionHeader.CommonHeader.Type = EFI_SECTION_GUID_DEFINED;
Crc32GuidSect2->GuidSectionHeader.CommonHeader.Size[0] = (UINT8) 0xff;
Crc32GuidSect2->GuidSectionHeader.CommonHeader.Size[1] = (UINT8) 0xff;
Crc32GuidSect2->GuidSectionHeader.CommonHeader.Size[2] = (UINT8) 0xff;
Crc32GuidSect2->GuidSectionHeader.CommonHeader.ExtendedSize = TotalLength;
memcpy (&(Crc32GuidSect2->GuidSectionHeader.SectionDefinitionGuid), &mEfiCrc32SectionGuid, sizeof (EFI_GUID));
Crc32GuidSect2->GuidSectionHeader.Attributes = EFI_GUIDED_SECTION_AUTH_STATUS_VALID;
Crc32GuidSect2->GuidSectionHeader.DataOffset = sizeof (CRC32_SECTION_HEADER2);
Crc32GuidSect2->CRC32Checksum = Crc32Checksum;
DebugMsg (NULL, 0, 9, "Guided section", "Data offset is %u", Crc32GuidSect2->GuidSectionHeader.DataOffset);
} else {
Crc32GuidSect = (CRC32_SECTION_HEADER *) FileBuffer;
Crc32GuidSect->GuidSectionHeader.CommonHeader.Type = EFI_SECTION_GUID_DEFINED;
Crc32GuidSect->GuidSectionHeader.CommonHeader.Size[0] = (UINT8) (TotalLength & 0xff);
Crc32GuidSect->GuidSectionHeader.CommonHeader.Size[1] = (UINT8) ((TotalLength & 0xff00) >> 8);
Crc32GuidSect->GuidSectionHeader.CommonHeader.Size[2] = (UINT8) ((TotalLength & 0xff0000) >> 16);
memcpy (&(Crc32GuidSect->GuidSectionHeader.SectionDefinitionGuid), &mEfiCrc32SectionGuid, sizeof (EFI_GUID));
Crc32GuidSect->GuidSectionHeader.Attributes = EFI_GUIDED_SECTION_AUTH_STATUS_VALID;
Crc32GuidSect->GuidSectionHeader.DataOffset = sizeof (CRC32_SECTION_HEADER);
Crc32GuidSect->CRC32Checksum = Crc32Checksum;
DebugMsg (NULL, 0, 9, "Guided section", "Data offset is %u", Crc32GuidSect->GuidSectionHeader.DataOffset);
}
} else {
if (TotalLength >= MAX_SECTION_SIZE) {
VendorGuidSect2 = (EFI_GUID_DEFINED_SECTION2 *) FileBuffer;
VendorGuidSect2->CommonHeader.Type = EFI_SECTION_GUID_DEFINED;
VendorGuidSect2->CommonHeader.Size[0] = (UINT8) 0xff;
VendorGuidSect2->CommonHeader.Size[1] = (UINT8) 0xff;
VendorGuidSect2->CommonHeader.Size[2] = (UINT8) 0xff;
VendorGuidSect2->CommonHeader.ExtendedSize = InputLength + sizeof (EFI_GUID_DEFINED_SECTION2);
memcpy (&(VendorGuidSect2->SectionDefinitionGuid), VendorGuid, sizeof (EFI_GUID));
VendorGuidSect2->Attributes = DataAttribute;
VendorGuidSect2->DataOffset = (UINT16) (sizeof (EFI_GUID_DEFINED_SECTION2) + DataHeaderSize);
DebugMsg (NULL, 0, 9, "Guided section", "Data offset is %u", VendorGuidSect2->DataOffset);
} else {
VendorGuidSect = (EFI_GUID_DEFINED_SECTION *) FileBuffer;
VendorGuidSect->CommonHeader.Type = EFI_SECTION_GUID_DEFINED;
VendorGuidSect->CommonHeader.Size[0] = (UINT8) (TotalLength & 0xff);
VendorGuidSect->CommonHeader.Size[1] = (UINT8) ((TotalLength & 0xff00) >> 8);
VendorGuidSect->CommonHeader.Size[2] = (UINT8) ((TotalLength & 0xff0000) >> 16);
memcpy (&(VendorGuidSect->SectionDefinitionGuid), VendorGuid, sizeof (EFI_GUID));
VendorGuidSect->Attributes = DataAttribute;
VendorGuidSect->DataOffset = (UINT16) (sizeof (EFI_GUID_DEFINED_SECTION) + DataHeaderSize);
DebugMsg (NULL, 0, 9, "Guided section", "Data offset is %u", VendorGuidSect->DataOffset);
}
}
VerboseMsg ("the size of the created section file is %u bytes", (unsigned) TotalLength);
//
// Set OutFileBuffer
//
*OutFileBuffer = FileBuffer;
return EFI_SUCCESS;
}
int
main (
int argc,
char *argv[]
)
/*++
Routine Description:
Main
Arguments:
command line parameters
Returns:
EFI_SUCCESS Section header successfully generated and section concatenated.
EFI_ABORTED Could not generate the section
EFI_OUT_OF_RESOURCES No resource to complete the operation.
--*/
{
UINT32 Index;
UINT32 InputFileNum;
FILE *OutFile;
CHAR8 **InputFileName;
CHAR8 *OutputFileName;
CHAR8 *SectionName;
CHAR8 *CompressionName;
CHAR8 *StringBuffer;
EFI_GUID VendorGuid = mZeroGuid;
int VersionNumber;
UINT8 SectType;
UINT8 SectCompSubType;
UINT16 SectGuidAttribute;
UINT64 SectGuidHeaderLength;
EFI_VERSION_SECTION *VersionSect;
EFI_USER_INTERFACE_SECTION *UiSect;
UINT32 InputLength;
UINT8 *OutFileBuffer;
EFI_STATUS Status;
UINT64 LogLevel;
UINT32 *InputFileAlign;
UINT32 InputFileAlignNum;
EFI_COMMON_SECTION_HEADER *SectionHeader;
InputFileAlign = NULL;
InputFileAlignNum = 0;
InputFileName = NULL;
OutputFileName = NULL;
SectionName = NULL;
CompressionName = NULL;
StringBuffer = "";
OutFile = NULL;
VersionNumber = 0;
InputFileNum = 0;
SectType = EFI_SECTION_ALL;
SectCompSubType = 0;
SectGuidAttribute = EFI_GUIDED_SECTION_NONE;
OutFileBuffer = NULL;
InputLength = 0;
Status = STATUS_SUCCESS;
LogLevel = 0;
SectGuidHeaderLength = 0;
VersionSect = NULL;
UiSect = NULL;
SetUtilityName (UTILITY_NAME);
if (argc == 1) {
Error (NULL, 0, 1001, "Missing options", "No options input");
Usage ();
return STATUS_ERROR;
}
//
// Parse command line
//
argc --;
argv ++;
if ((stricmp (argv[0], "-h") == 0) || (stricmp (argv[0], "--help") == 0)) {
Version ();
Usage ();
return STATUS_SUCCESS;
}
if (stricmp (argv[0], "--version") == 0) {
Version ();
return STATUS_SUCCESS;
}
while (argc > 0) {
if ((stricmp (argv[0], "-s") == 0) || (stricmp (argv[0], "--SectionType") == 0)) {
SectionName = argv[1];
if (SectionName == NULL) {
Error (NULL, 0, 1003, "Invalid option value", "Section Type can't be NULL");
goto Finish;
}
argc -= 2;
argv += 2;
continue;
}
if ((stricmp (argv[0], "-o") == 0) || (stricmp (argv[0], "--outputfile") == 0)) {
OutputFileName = argv[1];
if (OutputFileName == NULL) {
Error (NULL, 0, 1003, "Invalid option value", "Output file can't be NULL");
goto Finish;
}
argc -= 2;
argv += 2;
continue;
}
if ((stricmp (argv[0], "-c") == 0) || (stricmp (argv[0], "--compress") == 0)) {
CompressionName = argv[1];
if (CompressionName == NULL) {
Error (NULL, 0, 1003, "Invalid option value", "Compression Type can't be NULL");
goto Finish;
}
argc -= 2;
argv += 2;
continue;
}
if ((stricmp (argv[0], "-g") == 0) || (stricmp (argv[0], "--vendor") == 0)) {
Status = StringToGuid (argv[1], &VendorGuid);
if (EFI_ERROR (Status)) {
Error (NULL, 0, 1003, "Invalid option value", "%s = %s", argv[0], argv[1]);
goto Finish;
}
argc -= 2;
argv += 2;
continue;
}
if ((stricmp (argv[0], "-r") == 0) || (stricmp (argv[0], "--attributes") == 0)) {
if (stricmp (argv[1], mGUIDedSectionAttribue[EFI_GUIDED_SECTION_PROCESSING_REQUIRED]) == 0) {
SectGuidAttribute |= EFI_GUIDED_SECTION_PROCESSING_REQUIRED;
} else if (stricmp (argv[1], mGUIDedSectionAttribue[EFI_GUIDED_SECTION_AUTH_STATUS_VALID]) == 0) {
SectGuidAttribute |= EFI_GUIDED_SECTION_AUTH_STATUS_VALID;
} else if (stricmp (argv[1], mGUIDedSectionAttribue[0]) == 0) {
//
// NONE attribute
//
SectGuidAttribute |= EFI_GUIDED_SECTION_NONE;
} else {
Error (NULL, 0, 1003, "Invalid option value", "%s = %s", argv[0], argv[1]);
goto Finish;
}
argc -= 2;
argv += 2;
continue;
}
if ((stricmp (argv[0], "-l") == 0) || (stricmp (argv[0], "--HeaderLength") == 0)) {
Status = AsciiStringToUint64 (argv[1], FALSE, &SectGuidHeaderLength);
if (EFI_ERROR (Status)) {
Error (NULL, 0, 1003, "Invalid option value for GuidHeaderLength", "%s = %s", argv[0], argv[1]);
goto Finish;
}
argc -= 2;
argv += 2;
continue;
}
if ((stricmp (argv[0], "-n") == 0) || (stricmp (argv[0], "--name") == 0)) {
StringBuffer = argv[1];
if (StringBuffer == NULL) {
Error (NULL, 0, 1003, "Invalid option value", "Name can't be NULL");
goto Finish;
}
argc -= 2;
argv += 2;
continue;
}
if ((stricmp (argv[0], "-j") == 0) || (stricmp (argv[0], "--buildnumber") == 0)) {
if (argv[1] == NULL) {
Error (NULL, 0, 1003, "Invalid option value", "build number can't be NULL");
goto Finish;
}
//
// Verify string is a integrator number
//
for (Index = 0; Index < strlen (argv[1]); Index++) {
if ((argv[1][Index] != '-') && (isdigit ((int)argv[1][Index]) == 0)) {
Error (NULL, 0, 1003, "Invalid option value", "%s = %s", argv[0], argv[1]);
goto Finish;
}
}
sscanf (argv[1], "%d", &VersionNumber);
argc -= 2;
argv += 2;
continue;
}
if ((stricmp (argv[0], "-v") == 0) || (stricmp (argv[0], "--verbose") == 0)) {
SetPrintLevel (VERBOSE_LOG_LEVEL);
VerboseMsg ("Verbose output Mode Set!");
argc --;
argv ++;
continue;
}
if ((stricmp (argv[0], "-q") == 0) || (stricmp (argv[0], "--quiet") == 0)) {
SetPrintLevel (KEY_LOG_LEVEL);
KeyMsg ("Quiet output Mode Set!");
argc --;
argv ++;
continue;
}
if ((stricmp (argv[0], "-d") == 0) || (stricmp (argv[0], "--debug") == 0)) {
Status = AsciiStringToUint64 (argv[1], FALSE, &LogLevel);
if (EFI_ERROR (Status)) {
Error (NULL, 0, 1003, "Invalid option value", "%s = %s", argv[0], argv[1]);
goto Finish;
}
if (LogLevel > 9) {
Error (NULL, 0, 1003, "Invalid option value", "Debug Level range is 0~9, currnt input level is %d", (int) LogLevel);
goto Finish;
}
SetPrintLevel (LogLevel);
DebugMsg (NULL, 0, 9, "Debug Mode Set", "Debug Output Mode Level %s is set!", argv[1]);
argc -= 2;
argv += 2;
continue;
}
//
// Section File alignment requirement
//
if (stricmp (argv[0], "--sectionalign") == 0) {
if (InputFileAlignNum == 0) {
InputFileAlign = (UINT32 *) malloc (MAXIMUM_INPUT_FILE_NUM * sizeof (UINT32));
if (InputFileAlign == NULL) {
Error (NULL, 0, 4001, "Resource", "memory cannot be allocated!");
goto Finish;
}
memset (InputFileAlign, 1, MAXIMUM_INPUT_FILE_NUM * sizeof (UINT32));
} else if (InputFileAlignNum % MAXIMUM_INPUT_FILE_NUM == 0) {
InputFileAlign = (UINT32 *) realloc (
InputFileAlign,
(InputFileNum + MAXIMUM_INPUT_FILE_NUM) * sizeof (UINT32)
);
if (InputFileAlign == NULL) {
Error (NULL, 0, 4001, "Resource", "memory cannot be allocated!");
goto Finish;
}
memset (&(InputFileAlign[InputFileNum]), 1, (MAXIMUM_INPUT_FILE_NUM * sizeof (UINT32)));
}
Status = StringtoAlignment (argv[1], &(InputFileAlign[InputFileAlignNum]));
if (EFI_ERROR (Status)) {
Error (NULL, 0, 1003, "Invalid option value", "%s = %s", argv[0], argv[1]);
goto Finish;
}
argc -= 2;
argv += 2;
InputFileAlignNum ++;
continue;
}
//
// Get Input file name
//
if ((InputFileNum == 0) && (InputFileName == NULL)) {
InputFileName = (CHAR8 **) malloc (MAXIMUM_INPUT_FILE_NUM * sizeof (CHAR8 *));
if (InputFileName == NULL) {
Error (NULL, 0, 4001, "Resource", "memory cannot be allcoated");
goto Finish;
}
memset (InputFileName, 0, (MAXIMUM_INPUT_FILE_NUM * sizeof (CHAR8 *)));
} else if (InputFileNum % MAXIMUM_INPUT_FILE_NUM == 0) {
//
// InputFileName buffer too small, need to realloc
//
InputFileName = (CHAR8 **) realloc (
InputFileName,
(InputFileNum + MAXIMUM_INPUT_FILE_NUM) * sizeof (CHAR8 *)
);
if (InputFileName == NULL) {
Error (NULL, 0, 4001, "Resource", "memory cannot be allcoated");
goto Finish;
}
memset (&(InputFileName[InputFileNum]), 0, (MAXIMUM_INPUT_FILE_NUM * sizeof (CHAR8 *)));
}
InputFileName[InputFileNum++] = argv[0];
argc --;
argv ++;
}
if (InputFileAlignNum > 0 && InputFileAlignNum != InputFileNum) {
Error (NULL, 0, 1003, "Invalid option", "section alignment must be set for each section");
goto Finish;
}
VerboseMsg ("%s tool start.", UTILITY_NAME);
//
// Parse all command line parameters to get the corresponding section type.
//
VerboseMsg ("Section type is %s", SectionName);
if (SectionName == NULL) {
//
// No specified Section type, default is SECTION_ALL.
//
SectType = EFI_SECTION_ALL;
} else if (stricmp (SectionName, mSectionTypeName[EFI_SECTION_COMPRESSION]) == 0) {
SectType = EFI_SECTION_COMPRESSION;
if (CompressionName == NULL) {
//
// Default is PI_STD compression algorithm.
//
SectCompSubType = EFI_STANDARD_COMPRESSION;
} else if (stricmp (CompressionName, mCompressionTypeName[EFI_NOT_COMPRESSED]) == 0) {
SectCompSubType = EFI_NOT_COMPRESSED;
} else if (stricmp (CompressionName, mCompressionTypeName[EFI_STANDARD_COMPRESSION]) == 0) {
SectCompSubType = EFI_STANDARD_COMPRESSION;
} else {
Error (NULL, 0, 1003, "Invalid option value", "--compress = %s", CompressionName);
goto Finish;
}
VerboseMsg ("Compress method is %s", mCompressionTypeName [SectCompSubType]);
} else if (stricmp (SectionName, mSectionTypeName[EFI_SECTION_GUID_DEFINED]) == 0) {
SectType = EFI_SECTION_GUID_DEFINED;
if ((SectGuidAttribute & EFI_GUIDED_SECTION_NONE) != 0) {
//
// NONE attribute, clear attribute value.
//
SectGuidAttribute = SectGuidAttribute & ~EFI_GUIDED_SECTION_NONE;
}
VerboseMsg ("Vendor Guid is %08X-%04X-%04X-%02X%02X-%02X%02X%02X%02X%02X%02X",
(unsigned) VendorGuid.Data1,
VendorGuid.Data2,
VendorGuid.Data3,
VendorGuid.Data4[0],
VendorGuid.Data4[1],
VendorGuid.Data4[2],
VendorGuid.Data4[3],
VendorGuid.Data4[4],
VendorGuid.Data4[5],
VendorGuid.Data4[6],
VendorGuid.Data4[7]);
if ((SectGuidAttribute & EFI_GUIDED_SECTION_PROCESSING_REQUIRED) != 0) {
VerboseMsg ("Guid Attribute is %s", mGUIDedSectionAttribue[EFI_GUIDED_SECTION_PROCESSING_REQUIRED]);
}
if ((SectGuidAttribute & EFI_GUIDED_SECTION_AUTH_STATUS_VALID) != 0) {
VerboseMsg ("Guid Attribute is %s", mGUIDedSectionAttribue[EFI_GUIDED_SECTION_AUTH_STATUS_VALID]);
}
if (SectGuidHeaderLength != 0) {
VerboseMsg ("Guid Data Header size is 0x%llx", (unsigned long long) SectGuidHeaderLength);
}
} else if (stricmp (SectionName, mSectionTypeName[EFI_SECTION_PE32]) == 0) {
SectType = EFI_SECTION_PE32;
} else if (stricmp (SectionName, mSectionTypeName[EFI_SECTION_PIC]) == 0) {
SectType = EFI_SECTION_PIC;
} else if (stricmp (SectionName, mSectionTypeName[EFI_SECTION_TE]) == 0) {
SectType = EFI_SECTION_TE;
} else if (stricmp (SectionName, mSectionTypeName[EFI_SECTION_DXE_DEPEX]) == 0) {
SectType = EFI_SECTION_DXE_DEPEX;
} else if (stricmp (SectionName, mSectionTypeName[EFI_SECTION_SMM_DEPEX]) == 0) {
SectType = EFI_SECTION_SMM_DEPEX;
} else if (stricmp (SectionName, mSectionTypeName[EFI_SECTION_VERSION]) == 0) {
SectType = EFI_SECTION_VERSION;
if (VersionNumber < 0 || VersionNumber > 65535) {
Error (NULL, 0, 1003, "Invalid option value", "%d is not in 0~65535", VersionNumber);
goto Finish;
}
VerboseMsg ("Version section number is %d", VersionNumber);
} else if (stricmp (SectionName, mSectionTypeName[EFI_SECTION_USER_INTERFACE]) == 0) {
SectType = EFI_SECTION_USER_INTERFACE;
if (StringBuffer[0] == '\0') {
Error (NULL, 0, 1001, "Missing option", "user interface string");
goto Finish;
}
VerboseMsg ("UI section string name is %s", StringBuffer);
} else if (stricmp (SectionName, mSectionTypeName[EFI_SECTION_COMPATIBILITY16]) == 0) {
SectType = EFI_SECTION_COMPATIBILITY16;
} else if (stricmp (SectionName, mSectionTypeName[EFI_SECTION_FIRMWARE_VOLUME_IMAGE]) == 0) {
SectType = EFI_SECTION_FIRMWARE_VOLUME_IMAGE;
} else if (stricmp (SectionName, mSectionTypeName[EFI_SECTION_FREEFORM_SUBTYPE_GUID]) == 0) {
SectType = EFI_SECTION_FREEFORM_SUBTYPE_GUID;
} else if (stricmp (SectionName, mSectionTypeName[EFI_SECTION_RAW]) == 0) {
SectType = EFI_SECTION_RAW;
} else if (stricmp (SectionName, mSectionTypeName[EFI_SECTION_PEI_DEPEX]) == 0) {
SectType = EFI_SECTION_PEI_DEPEX;
} else {
Error (NULL, 0, 1003, "Invalid option value", "SectionType = %s", SectionName);
goto Finish;
}
//
// GuidValue is only required by Guided section.
//
if ((SectType != EFI_SECTION_GUID_DEFINED) &&
(SectionName != NULL) &&
(CompareGuid (&VendorGuid, &mZeroGuid) != 0)) {
fprintf (stdout, "Warning: the input guid value is not required for this section type %s\n", SectionName);
}
//
// Check whether there is input file
//
if ((SectType != EFI_SECTION_VERSION) && (SectType != EFI_SECTION_USER_INTERFACE)) {
//
// The input file are required for other section type.
//
if (InputFileNum == 0) {
Error (NULL, 0, 1001, "Missing options", "Input files");
goto Finish;
}
}
//
// Check whether there is output file
//
for (Index = 0; Index < InputFileNum; Index ++) {
VerboseMsg ("the %uth input file name is %s", (unsigned) Index, InputFileName[Index]);
}
if (OutputFileName == NULL) {
Error (NULL, 0, 1001, "Missing options", "Output file");
goto Finish;
// OutFile = stdout;
}
VerboseMsg ("Output file name is %s", OutputFileName);
//
// At this point, we've fully validated the command line, and opened appropriate
// files, so let's go and do what we've been asked to do...
//
//
// Within this switch, build and write out the section header including any
// section type specific pieces. If there's an input file, it's tacked on later
//
switch (SectType) {
case EFI_SECTION_COMPRESSION:
if (InputFileAlign != NULL) {
free (InputFileAlign);
InputFileAlign = NULL;
}
Status = GenSectionCompressionSection (
InputFileName,
InputFileAlign,
InputFileNum,
SectCompSubType,
&OutFileBuffer
);
break;
case EFI_SECTION_GUID_DEFINED:
if (InputFileAlign != NULL && (CompareGuid (&VendorGuid, &mZeroGuid) != 0)) {
//
// Only process alignment for the default known CRC32 guided section.
// For the unknown guided section, the alignment is processed when the dummy all section (EFI_SECTION_ALL) is generated.
//
free (InputFileAlign);
InputFileAlign = NULL;
}
Status = GenSectionGuidDefinedSection (
InputFileName,
InputFileAlign,
InputFileNum,
&VendorGuid,
SectGuidAttribute,
(UINT32) SectGuidHeaderLength,
&OutFileBuffer
);
break;
case EFI_SECTION_VERSION:
Index = sizeof (EFI_COMMON_SECTION_HEADER);
//
// 2 bytes for the build number UINT16
//
Index += 2;
//
// StringBuffer is ascii.. unicode is 2X + 2 bytes for terminating unicode null.
//
Index += (strlen (StringBuffer) * 2) + 2;
OutFileBuffer = (UINT8 *) malloc (Index);
if (OutFileBuffer == NULL) {
Error (NULL, 0, 4001, "Resource", "memory cannot be allcoated");
goto Finish;
}
VersionSect = (EFI_VERSION_SECTION *) OutFileBuffer;
VersionSect->CommonHeader.Type = SectType;
VersionSect->CommonHeader.Size[0] = (UINT8) (Index & 0xff);
VersionSect->CommonHeader.Size[1] = (UINT8) ((Index & 0xff00) >> 8);
VersionSect->CommonHeader.Size[2] = (UINT8) ((Index & 0xff0000) >> 16);
VersionSect->BuildNumber = (UINT16) VersionNumber;
Ascii2UnicodeString (StringBuffer, VersionSect->VersionString);
VerboseMsg ("the size of the created section file is %u bytes", (unsigned) Index);
break;
case EFI_SECTION_USER_INTERFACE:
Index = sizeof (EFI_COMMON_SECTION_HEADER);
//
// StringBuffer is ascii.. unicode is 2X + 2 bytes for terminating unicode null.
//
Index += (strlen (StringBuffer) * 2) + 2;
OutFileBuffer = (UINT8 *) malloc (Index);
if (OutFileBuffer == NULL) {
Error (NULL, 0, 4001, "Resource", "memory cannot be allcoated");
goto Finish;
}
UiSect = (EFI_USER_INTERFACE_SECTION *) OutFileBuffer;
UiSect->CommonHeader.Type = SectType;
UiSect->CommonHeader.Size[0] = (UINT8) (Index & 0xff);
UiSect->CommonHeader.Size[1] = (UINT8) ((Index & 0xff00) >> 8);
UiSect->CommonHeader.Size[2] = (UINT8) ((Index & 0xff0000) >> 16);
Ascii2UnicodeString (StringBuffer, UiSect->FileNameString);
VerboseMsg ("the size of the created section file is %u bytes", (unsigned) Index);
break;
case EFI_SECTION_ALL:
//
// read all input file contents into a buffer
// first get the size of all file contents
//
Status = GetSectionContents (
InputFileName,
InputFileAlign,
InputFileNum,
OutFileBuffer,
&InputLength
);
if (Status == EFI_BUFFER_TOO_SMALL) {
OutFileBuffer = (UINT8 *) malloc (InputLength);
if (OutFileBuffer == NULL) {
Error (NULL, 0, 4001, "Resource", "memory cannot be allcoated");
goto Finish;
}
//
// read all input file contents into a buffer
//
Status = GetSectionContents (
InputFileName,
InputFileAlign,
InputFileNum,
OutFileBuffer,
&InputLength
);
}
VerboseMsg ("the size of the created section file is %u bytes", (unsigned) InputLength);
break;
default:
//
// All other section types are caught by default (they're all the same)
//
Status = GenSectionCommonLeafSection (
InputFileName,
InputFileNum,
SectType,
&OutFileBuffer
);
break;
}
if (Status != EFI_SUCCESS || OutFileBuffer == NULL) {
Error (NULL, 0, 2000, "Status is not successful", "Status value is 0x%X", (int) Status);
goto Finish;
}
//
// Get output file length
//
if (SectType != EFI_SECTION_ALL) {
SectionHeader = (EFI_COMMON_SECTION_HEADER *)OutFileBuffer;
InputLength = *(UINT32 *)SectionHeader->Size & 0x00ffffff;
if (InputLength == 0xffffff) {
InputLength = ((EFI_COMMON_SECTION_HEADER2 *)SectionHeader)->ExtendedSize;
}
}
//
// Write the output file
//
OutFile = fopen (LongFilePath (OutputFileName), "wb");
if (OutFile == NULL) {
Error (NULL, 0, 0001, "Error opening file for writing", OutputFileName);
goto Finish;
}
fwrite (OutFileBuffer, InputLength, 1, OutFile);
Finish:
if (InputFileName != NULL) {
free (InputFileName);
}
if (InputFileAlign != NULL) {
free (InputFileAlign);
}
if (OutFileBuffer != NULL) {
free (OutFileBuffer);
}
if (OutFile != NULL) {
fclose (OutFile);
}
VerboseMsg ("%s tool done with return code is 0x%x.", UTILITY_NAME, GetUtilityStatus ());
return GetUtilityStatus ();
}