/* * Copyright (c) 2016-2017, ARM Limited and Contributors. All rights reserved. * * SPDX-License-Identifier: BSD-3-Clause */ #ifndef __ASM_MACROS_S__ #define __ASM_MACROS_S__ #include <arch.h> #include <asm_macros_common.S> #include <spinlock.h> #define WORD_SIZE 4 /* * Co processor register accessors */ .macro ldcopr reg, coproc, opc1, CRn, CRm, opc2 mrc \coproc, \opc1, \reg, \CRn, \CRm, \opc2 .endm .macro ldcopr16 reg1, reg2, coproc, opc1, CRm mrrc \coproc, \opc1, \reg1, \reg2, \CRm .endm .macro stcopr reg, coproc, opc1, CRn, CRm, opc2 mcr \coproc, \opc1, \reg, \CRn, \CRm, \opc2 .endm .macro stcopr16 reg1, reg2, coproc, opc1, CRm mcrr \coproc, \opc1, \reg1, \reg2, \CRm .endm /* Cache line size helpers */ .macro dcache_line_size reg, tmp ldcopr \tmp, CTR ubfx \tmp, \tmp, #CTR_DMINLINE_SHIFT, #CTR_DMINLINE_WIDTH mov \reg, #WORD_SIZE lsl \reg, \reg, \tmp .endm .macro icache_line_size reg, tmp ldcopr \tmp, CTR and \tmp, \tmp, #CTR_IMINLINE_MASK mov \reg, #WORD_SIZE lsl \reg, \reg, \tmp .endm /* * Declare the exception vector table, enforcing it is aligned on a * 32 byte boundary. */ .macro vector_base label .section .vectors, "ax" .align 5 \label: .endm /* * This macro calculates the base address of the current CPU's multi * processor(MP) stack using the plat_my_core_pos() index, the name of * the stack storage and the size of each stack. * Out: r0 = physical address of stack base * Clobber: r14, r1, r2 */ .macro get_my_mp_stack _name, _size bl plat_my_core_pos ldr r2, =(\_name + \_size) mov r1, #\_size mla r0, r0, r1, r2 .endm /* * This macro calculates the base address of a uniprocessor(UP) stack * using the name of the stack storage and the size of the stack * Out: r0 = physical address of stack base */ .macro get_up_stack _name, _size ldr r0, =(\_name + \_size) .endm /* * Helper macro to generate the best mov/movw/movt combinations * according to the value to be moved. */ .macro mov_imm _reg, _val .if ((\_val) & 0xffff0000) == 0 mov \_reg, #(\_val) .else movw \_reg, #((\_val) & 0xffff) movt \_reg, #((\_val) >> 16) .endif .endm /* * Macro to mark instances where we're jumping to a function and don't * expect a return. To provide the function being jumped to with * additional information, we use 'bl' instruction to jump rather than * 'b'. * * Debuggers infer the location of a call from where LR points to, which * is usually the instruction after 'bl'. If this macro expansion * happens to be the last location in a function, that'll cause the LR * to point a location beyond the function, thereby misleading debugger * back trace. We therefore insert a 'nop' after the function call for * debug builds, unless 'skip_nop' parameter is non-zero. */ .macro no_ret _func:req, skip_nop=0 bl \_func #if DEBUG .ifeq \skip_nop nop .endif #endif .endm /* * Reserve space for a spin lock in assembly file. */ .macro define_asm_spinlock _name:req .align SPINLOCK_ASM_ALIGN \_name: .space SPINLOCK_ASM_SIZE .endm /* * Helper macro to OR the bottom 32 bits of `_val` into `_reg_l` * and the top 32 bits of `_val` into `_reg_h`. If either the bottom * or top word of `_val` is zero, the corresponding OR operation * is skipped. */ .macro orr64_imm _reg_l, _reg_h, _val .if (\_val >> 32) orr \_reg_h, \_reg_h, #(\_val >> 32) .endif .if (\_val & 0xffffffff) orr \_reg_l, \_reg_l, #(\_val & 0xffffffff) .endif .endm /* * Helper macro to bitwise-clear bits in `_reg_l` and * `_reg_h` given a 64 bit immediate `_val`. The set bits * in the bottom word of `_val` dictate which bits from * `_reg_l` should be cleared. Similarly, the set bits in * the top word of `_val` dictate which bits from `_reg_h` * should be cleared. If either the bottom or top word of * `_val` is zero, the corresponding BIC operation is skipped. */ .macro bic64_imm _reg_l, _reg_h, _val .if (\_val >> 32) bic \_reg_h, \_reg_h, #(\_val >> 32) .endif .if (\_val & 0xffffffff) bic \_reg_l, \_reg_l, #(\_val & 0xffffffff) .endif .endm #endif /* __ASM_MACROS_S__ */