/** @file
This driver is used to manage Designware SD/MMC host controller.
It would expose EFI_SD_MMC_PASS_THRU_PROTOCOL for upper layer use.
Copyright (c) 2015 - 2016, Intel Corporation. All rights reserved.<BR>
Copyright (C) 2016 Marvell International Ltd. All rigths reserved.<BR>
Copyright (C) 2017, Linaro Ltd. All rigths reserved.<BR>
This program and the accompanying materials
are licensed and made available under the terms and conditions of the BSD License
which accompanies this distribution. The full text of the license may be found at
http://opensource.org/licenses/bsd-license.php
THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
**/
#include "DwMmcHcDxe.h"
//
// Driver Global Variables
//
EFI_DRIVER_BINDING_PROTOCOL gDwMmcHcDriverBinding = {
DwMmcHcDriverBindingSupported,
DwMmcHcDriverBindingStart,
DwMmcHcDriverBindingStop,
0x10,
NULL,
NULL
};
//
// Template for Designware SD/MMC host controller private data.
//
DW_MMC_HC_PRIVATE_DATA gDwMmcHcTemplate = {
DW_MMC_HC_PRIVATE_SIGNATURE, // Signature
NULL, // ControllerHandle
NULL, // PciIo
{ // PassThru
sizeof (UINT32),
DwMmcPassThruPassThru,
DwMmcPassThruGetNextSlot,
DwMmcPassThruBuildDevicePath,
DwMmcPassThruGetSlotNumber,
DwMmcPassThruResetDevice
},
NULL, // PlatformDwMmc
0, // PciAttributes
0, // PreviousSlot
NULL, // TimerEvent
NULL, // ConnectEvent
// Queue
INITIALIZE_LIST_HEAD_VARIABLE (gDwMmcHcTemplate.Queue),
{ // Slot
{0, UnknownSlot, 0, 0, 0}, {0, UnknownSlot, 0, 0, 0}, {0, UnknownSlot, 0, 0, 0},
{0, UnknownSlot, 0, 0, 0}, {0, UnknownSlot, 0, 0, 0}, {0, UnknownSlot, 0, 0, 0}
},
{ // Capability
{0},
},
{ // MaxCurrent
0,
},
0 // ControllerVersion
};
SD_DEVICE_PATH mSdDpTemplate = {
{
MESSAGING_DEVICE_PATH,
MSG_SD_DP,
{
(UINT8) (sizeof (SD_DEVICE_PATH)),
(UINT8) ((sizeof (SD_DEVICE_PATH)) >> 8)
}
},
0
};
EMMC_DEVICE_PATH mEmmcDpTemplate = {
{
MESSAGING_DEVICE_PATH,
MSG_EMMC_DP,
{
(UINT8) (sizeof (EMMC_DEVICE_PATH)),
(UINT8) ((sizeof (EMMC_DEVICE_PATH)) >> 8)
}
},
0
};
//
// Prioritized function list to detect card type.
// User could add other card detection logic here.
//
CARD_TYPE_DETECT_ROUTINE mCardTypeDetectRoutineTable[] = {
EmmcIdentification,
SdCardIdentification,
NULL
};
/**
The entry point for SD host controller driver, used to install this driver on the ImageHandle.
@param[in] ImageHandle The firmware allocated handle for this driver image.
@param[in] SystemTable Pointer to the EFI system table.
@retval EFI_SUCCESS Driver loaded.
@retval other Driver not loaded.
**/
EFI_STATUS
EFIAPI
InitializeDwMmcHcDxe (
IN EFI_HANDLE ImageHandle,
IN EFI_SYSTEM_TABLE *SystemTable
)
{
EFI_STATUS Status;
Status = EfiLibInstallDriverBindingComponentName2 (
ImageHandle,
SystemTable,
&gDwMmcHcDriverBinding,
ImageHandle,
&gDwMmcHcComponentName,
&gDwMmcHcComponentName2
);
ASSERT_EFI_ERROR (Status);
return Status;
}
/**
Call back function when the timer event is signaled.
@param[in] Event The Event this notify function registered to.
@param[in] Context Pointer to the context data registered to the
Event.
**/
VOID
EFIAPI
ProcessAsyncTaskList (
IN EFI_EVENT Event,
IN VOID* Context
)
{
DW_MMC_HC_PRIVATE_DATA *Private;
LIST_ENTRY *Link;
DW_MMC_HC_TRB *Trb;
EFI_STATUS Status;
EFI_SD_MMC_PASS_THRU_COMMAND_PACKET *Packet;
BOOLEAN InfiniteWait;
EFI_EVENT TrbEvent;
Private = (DW_MMC_HC_PRIVATE_DATA *)Context;
//
// Check if the first entry in the async I/O queue is done or not.
//
Status = EFI_SUCCESS;
Trb = NULL;
Link = GetFirstNode (&Private->Queue);
if (!IsNull (&Private->Queue, Link)) {
Trb = DW_MMC_HC_TRB_FROM_THIS (Link);
if (!Private->Slot[Trb->Slot].MediaPresent) {
Status = EFI_NO_MEDIA;
goto Done;
}
if (!Trb->Started) {
//
// Check whether the cmd/data line is ready for transfer.
//
Status = DwMmcCheckTrbEnv (Private, Trb);
if (!EFI_ERROR (Status)) {
Trb->Started = TRUE;
Status = DwMmcExecTrb (Private, Trb);
if (EFI_ERROR (Status)) {
goto Done;
}
} else {
goto Done;
}
}
Status = DwMmcCheckTrbResult (Private, Trb);
}
Done:
if ((Trb != NULL) && (Status == EFI_NOT_READY)) {
Packet = Trb->Packet;
if (Packet->Timeout == 0) {
InfiniteWait = TRUE;
} else {
InfiniteWait = FALSE;
}
if ((!InfiniteWait) && (Trb->Timeout-- == 0)) {
RemoveEntryList (Link);
Trb->Packet->TransactionStatus = EFI_TIMEOUT;
TrbEvent = Trb->Event;
DwMmcFreeTrb (Trb);
DEBUG ((DEBUG_VERBOSE, "ProcessAsyncTaskList(): Signal Event %p EFI_TIMEOUT\n", TrbEvent));
gBS->SignalEvent (TrbEvent);
return;
}
}
if ((Trb != NULL) && (Status != EFI_NOT_READY)) {
RemoveEntryList (Link);
Trb->Packet->TransactionStatus = Status;
TrbEvent = Trb->Event;
DwMmcFreeTrb (Trb);
DEBUG ((DEBUG_VERBOSE, "ProcessAsyncTaskList(): Signal Event %p with %r\n", TrbEvent, Status));
gBS->SignalEvent (TrbEvent);
}
return;
}
/**
Sd removable device enumeration callback function when the timer event is signaled.
@param[in] Event The Event this notify function registered to.
@param[in] Context Pointer to the context data registered to the
Event.
**/
VOID
EFIAPI
DwMmcHcEnumerateDevice (
IN EFI_EVENT Event,
IN VOID* Context
)
{
DW_MMC_HC_PRIVATE_DATA *Private;
EFI_STATUS Status;
UINT8 Slot;
BOOLEAN MediaPresent;
UINT32 RoutineNum;
CARD_TYPE_DETECT_ROUTINE *Routine;
UINTN Index;
LIST_ENTRY *Link;
LIST_ENTRY *NextLink;
DW_MMC_HC_TRB *Trb;
EFI_TPL OldTpl;
return;
Private = (DW_MMC_HC_PRIVATE_DATA *)Context;
for (Slot = 0; Slot < DW_MMC_HC_MAX_SLOT; Slot++) {
if ((Private->Slot[Slot].Enable) && (Private->Slot[Slot].SlotType == RemovableSlot)) {
Status = DwMmcHcCardDetect (Private->PciIo, Slot, &MediaPresent);
if ((Status == EFI_MEDIA_CHANGED) && !MediaPresent) {
DEBUG ((DEBUG_INFO, "DwMmcHcEnumerateDevice: device disconnected at slot %d of pci %p\n", Slot, Private->PciIo));
Private->Slot[Slot].MediaPresent = FALSE;
//
// Signal all async task events at the slot with EFI_NO_MEDIA status.
//
OldTpl = gBS->RaiseTPL (TPL_NOTIFY);
for (Link = GetFirstNode (&Private->Queue);
!IsNull (&Private->Queue, Link);
Link = NextLink) {
NextLink = GetNextNode (&Private->Queue, Link);
Trb = DW_MMC_HC_TRB_FROM_THIS (Link);
if (Trb->Slot == Slot) {
RemoveEntryList (Link);
Trb->Packet->TransactionStatus = EFI_NO_MEDIA;
gBS->SignalEvent (Trb->Event);
DwMmcFreeTrb (Trb);
}
}
gBS->RestoreTPL (OldTpl);
//
// Notify the upper layer the connect state change through ReinstallProtocolInterface.
//
gBS->ReinstallProtocolInterface (
Private->ControllerHandle,
&gEfiSdMmcPassThruProtocolGuid,
&Private->PassThru,
&Private->PassThru
);
}
if ((Status == EFI_MEDIA_CHANGED) && MediaPresent) {
DEBUG ((DEBUG_INFO, "DwMmcHcEnumerateDevice: device connected at slot %d of pci %p\n", Slot, Private->PciIo));
//
// Initialize slot and start identification process for the new attached device
//
Status = DwMmcHcInitHost (Private->PciIo, Slot, Private->Capability[Slot]);
if (EFI_ERROR (Status)) {
continue;
}
//
// Reset the specified slot of the SD/MMC Pci Host Controller
//
Status = DwMmcHcReset (Private->PciIo, Slot, Private->Capability[Slot]);
if (EFI_ERROR (Status)) {
continue;
}
Private->Slot[Slot].MediaPresent = TRUE;
RoutineNum = sizeof (mCardTypeDetectRoutineTable) / sizeof (CARD_TYPE_DETECT_ROUTINE);
for (Index = 0; Index < RoutineNum; Index++) {
Routine = &mCardTypeDetectRoutineTable[Index];
if (*Routine != NULL) {
Status = (*Routine) (Private, Slot);
if (!EFI_ERROR (Status)) {
break;
}
}
}
//
// This card doesn't get initialized correctly.
//
if (Index == RoutineNum) {
}
//
// Notify the upper layer the connect state change through ReinstallProtocolInterface.
//
gBS->ReinstallProtocolInterface (
Private->ControllerHandle,
&gEfiSdMmcPassThruProtocolGuid,
&Private->PassThru,
&Private->PassThru
);
}
}
}
return;
}
/**
Reset the specified SD/MMC host controller and enable all interrupts.
@param[in] PciIo The PCI IO protocol instance.
@param[in] Slot The slot number of the SD card to send the command to.
@retval EFI_SUCCESS The software reset executes successfully.
@retval Others The software reset fails.
**/
EFI_STATUS
DwMmcHcReset (
IN EFI_PCI_IO_PROTOCOL *PciIo,
IN UINT8 Slot,
IN DW_MMC_HC_SLOT_CAP Capability
)
{
EFI_STATUS Status;
UINT32 BlkSize;
//
// Enable all interrupt after reset all.
//
Status = DwMmcHcEnableInterrupt (PciIo, Slot);
if (EFI_ERROR (Status)) {
DEBUG ((DEBUG_ERROR, "DwMmcHcReset: enable interrupts fail: %r\n", Status));
return Status;
}
Status = DwMmcHcInitTimeoutCtrl (PciIo, Slot);
if (EFI_ERROR (Status)) {
return Status;
}
BlkSize = DW_MMC_BLOCK_SIZE;
Status = DwMmcHcRwMmio (PciIo, Slot, DW_MMC_BLKSIZ, FALSE, sizeof (BlkSize), &BlkSize);
if (EFI_ERROR (Status)) {
DEBUG ((DEBUG_ERROR, "DwMmcHcReset: set block size fails: %r\n", Status));
return Status;
}
Status = DwMmcHcInitClockFreq (PciIo, Slot, Capability);
if (EFI_ERROR (Status)) {
return Status;
}
Status = DwMmcHcSetBusWidth (PciIo, Slot, FALSE, 1);
return Status;
}
/**
Tests to see if this driver supports a given controller. If a child device is provided,
it further tests to see if this driver supports creating a handle for the specified child device.
This function checks to see if the driver specified by This supports the device specified by
ControllerHandle. Drivers will typically use the device path attached to
ControllerHandle and/or the services from the bus I/O abstraction attached to
ControllerHandle to determine if the driver supports ControllerHandle. This function
may be called many times during platform initialization. In order to reduce boot times, the tests
performed by this function must be very small, and take as little time as possible to execute. This
function must not change the state of any hardware devices, and this function must be aware that the
device specified by ControllerHandle may already be managed by the same driver or a
different driver. This function must match its calls to AllocatePages() with FreePages(),
AllocatePool() with FreePool(), and OpenProtocol() with CloseProtocol().
Since ControllerHandle may have been previously started by the same driver, if a protocol is
already in the opened state, then it must not be closed with CloseProtocol(). This is required
to guarantee the state of ControllerHandle is not modified by this function.
@param[in] This A pointer to the EFI_DRIVER_BINDING_PROTOCOL instance.
@param[in] ControllerHandle The handle of the controller to test. This handle
must support a protocol interface that supplies
an I/O abstraction to the driver.
@param[in] RemainingDevicePath A pointer to the remaining portion of a device path. This
parameter is ignored by device drivers, and is optional for bus
drivers. For bus drivers, if this parameter is not NULL, then
the bus driver must determine if the bus controller specified
by ControllerHandle and the child controller specified
by RemainingDevicePath are both supported by this
bus driver.
@retval EFI_SUCCESS The device specified by ControllerHandle and
RemainingDevicePath is supported by the driver specified by This.
@retval EFI_ALREADY_STARTED The device specified by ControllerHandle and
RemainingDevicePath is already being managed by the driver
specified by This.
@retval EFI_ACCESS_DENIED The device specified by ControllerHandle and
RemainingDevicePath is already being managed by a different
driver or an application that requires exclusive access.
Currently not implemented.
@retval EFI_UNSUPPORTED The device specified by ControllerHandle and
RemainingDevicePath is not supported by the driver specified by This.
**/
EFI_STATUS
EFIAPI
DwMmcHcDriverBindingSupported (
IN EFI_DRIVER_BINDING_PROTOCOL *This,
IN EFI_HANDLE Controller,
IN EFI_DEVICE_PATH_PROTOCOL *RemainingDevicePath
)
{
EFI_STATUS Status;
EFI_DEVICE_PATH_PROTOCOL *ParentDevicePath;
EFI_PCI_IO_PROTOCOL *PciIo;
PCI_TYPE00 PciData;
PLATFORM_DW_MMC_PROTOCOL *PlatformDwMmc;
PciIo = NULL;
ParentDevicePath = NULL;
Status = gBS->LocateProtocol (
&gPlatformDwMmcProtocolGuid,
NULL,
(VOID **) &PlatformDwMmc
);
if (EFI_ERROR (Status)) {
return Status;
}
//
// SdPciHcDxe is a device driver, and should ingore the
// "RemainingDevicePath" according to EFI spec.
//
Status = gBS->OpenProtocol (
Controller,
&gEfiDevicePathProtocolGuid,
(VOID *) &ParentDevicePath,
This->DriverBindingHandle,
Controller,
EFI_OPEN_PROTOCOL_BY_DRIVER
);
if (EFI_ERROR (Status)) {
//
// EFI_ALREADY_STARTED is also an error.
//
return Status;
}
//
// Close the protocol because we don't use it here.
//
gBS->CloseProtocol (
Controller,
&gEfiDevicePathProtocolGuid,
This->DriverBindingHandle,
Controller
);
//
// Now test the EfiPciIoProtocol.
//
Status = gBS->OpenProtocol (
Controller,
&gEfiPciIoProtocolGuid,
(VOID **) &PciIo,
This->DriverBindingHandle,
Controller,
EFI_OPEN_PROTOCOL_BY_DRIVER
);
if (EFI_ERROR (Status)) {
return Status;
}
//
// Now further check the PCI header: Base class (offset 0x08) and
// Sub Class (offset 0x05). This controller should be an SD/MMC PCI
// Host Controller.
//
Status = PciIo->Pci.Read (
PciIo,
EfiPciIoWidthUint8,
0,
sizeof (PciData),
&PciData
);
if (EFI_ERROR (Status)) {
gBS->CloseProtocol (
Controller,
&gEfiPciIoProtocolGuid,
This->DriverBindingHandle,
Controller
);
return EFI_UNSUPPORTED;
}
//
// Since we already got the PciData, we can close protocol to avoid to carry it
// on for multiple exit points.
//
gBS->CloseProtocol (
Controller,
&gEfiPciIoProtocolGuid,
This->DriverBindingHandle,
Controller
);
//
// Examine SD PCI Host Controller PCI Configuration table fields.
//
if ((PciData.Hdr.ClassCode[2] == PCI_CLASS_SYSTEM_PERIPHERAL) &&
(PciData.Hdr.ClassCode[1] == PCI_SUBCLASS_SD_HOST_CONTROLLER) &&
((PciData.Hdr.ClassCode[0] == 0x00) || (PciData.Hdr.ClassCode[0] == 0x01))) {
return EFI_SUCCESS;
}
return EFI_UNSUPPORTED;
}
/**
Starts a device controller or a bus controller.
The Start() function is designed to be invoked from the EFI boot service ConnectController().
As a result, much of the error checking on the parameters to Start() has been moved into this
common boot service. It is legal to call Start() from other locations,
but the following calling restrictions must be followed or the system behavior will not be deterministic.
1. ControllerHandle must be a valid EFI_HANDLE.
2. If RemainingDevicePath is not NULL, then it must be a pointer to a naturally aligned
EFI_DEVICE_PATH_PROTOCOL.
3. Prior to calling Start(), the Supported() function for the driver specified by This must
have been called with the same calling parameters, and Supported() must have returned EFI_SUCCESS.
@param[in] This A pointer to the EFI_DRIVER_BINDING_PROTOCOL instance.
@param[in] ControllerHandle The handle of the controller to start. This handle
must support a protocol interface that supplies
an I/O abstraction to the driver.
@param[in] RemainingDevicePath A pointer to the remaining portion of a device path. This
parameter is ignored by device drivers, and is optional for bus
drivers. For a bus driver, if this parameter is NULL, then handles
for all the children of Controller are created by this driver.
If this parameter is not NULL and the first Device Path Node is
not the End of Device Path Node, then only the handle for the
child device specified by the first Device Path Node of
RemainingDevicePath is created by this driver.
If the first Device Path Node of RemainingDevicePath is
the End of Device Path Node, no child handle is created by this
driver.
@retval EFI_SUCCESS The device was started.
@retval EFI_DEVICE_ERROR The device could not be started due to a device error.Currently not implemented.
@retval EFI_OUT_OF_RESOURCES The request could not be completed due to a lack of resources.
@retval Others The driver failded to start the device.
**/
EFI_STATUS
EFIAPI
DwMmcHcDriverBindingStart (
IN EFI_DRIVER_BINDING_PROTOCOL *This,
IN EFI_HANDLE Controller,
IN EFI_DEVICE_PATH_PROTOCOL *RemainingDevicePath
)
{
EFI_STATUS Status;
DW_MMC_HC_PRIVATE_DATA *Private;
EFI_PCI_IO_PROTOCOL *PciIo;
UINT64 Supports;
UINT64 PciAttributes;
UINT8 Slot;
UINT8 Index;
CARD_TYPE_DETECT_ROUTINE *Routine;
UINT32 RoutineNum;
BOOLEAN Support64BitDma;
BOOLEAN MediaPresent;
PLATFORM_DW_MMC_PROTOCOL *PlatformDwMmc;
Status = gBS->LocateProtocol (
&gPlatformDwMmcProtocolGuid,
NULL,
(VOID **) &PlatformDwMmc
);
if (EFI_ERROR (Status)) {
return Status;
}
//
// Open PCI I/O Protocol and save pointer to open protocol
// in private data area.
//
PciIo = NULL;
Status = gBS->OpenProtocol (
Controller,
&gEfiPciIoProtocolGuid,
(VOID **) &PciIo,
This->DriverBindingHandle,
Controller,
EFI_OPEN_PROTOCOL_BY_DRIVER
);
if (EFI_ERROR (Status)) {
return Status;
}
//
// Enable the SD Host Controller MMIO space
//
Private = NULL;
Status = PciIo->Attributes (
PciIo,
EfiPciIoAttributeOperationGet,
0,
&PciAttributes
);
if (EFI_ERROR (Status)) {
goto Done;
}
Status = PciIo->Attributes (
PciIo,
EfiPciIoAttributeOperationSupported,
0,
&Supports
);
if (!EFI_ERROR (Status)) {
Supports &= (UINT64)EFI_PCI_DEVICE_ENABLE;
Status = PciIo->Attributes (
PciIo,
EfiPciIoAttributeOperationEnable,
Supports,
NULL
);
} else {
goto Done;
}
Private = AllocateCopyPool (sizeof (DW_MMC_HC_PRIVATE_DATA), &gDwMmcHcTemplate);
if (Private == NULL) {
Status = EFI_OUT_OF_RESOURCES;
goto Done;
}
Private->ControllerHandle = Controller;
Private->PciIo = PciIo;
Private->PciAttributes = PciAttributes;
Private->PlatformDwMmc = PlatformDwMmc;
InitializeListHead (&Private->Queue);
Support64BitDma = TRUE;
//for (Slot = 0; Slot < DW_MMC_HC_MAX_SLOT; Slot++) {
for (Slot = 0; Slot < 1; Slot++) {
Status = DwMmcHcGetCapability (PciIo, Controller, Slot, &Private->Capability[Slot]);
if (EFI_ERROR (Status)) {
break;
}
Support64BitDma &= Private->Capability[Slot].SysBus64;
if (Private->Capability[Slot].BaseClkFreq == 0) {
continue;
}
DumpCapabilityReg (Slot, &Private->Capability[Slot]);
MediaPresent = FALSE;
Status = DwMmcHcCardDetect (Private->PciIo, Slot, &MediaPresent);
if (MediaPresent == FALSE) {
continue;
}
//
// Initialize slot and start identification process for the new attached device
//
Status = DwMmcHcInitHost (PciIo, Slot, Private->Capability[Slot]);
if (EFI_ERROR (Status)) {
return Status;
}
//
// Reset HC
//
Status = DwMmcHcReset (PciIo, Slot, Private->Capability[Slot]);
if (EFI_ERROR (Status)) {
return Status;
}
Private->Slot[Slot].CardType = Private->Capability[Slot].CardType;
Private->Slot[Slot].Enable = TRUE;
Private->Slot[Slot].MediaPresent = TRUE;
RoutineNum = sizeof (mCardTypeDetectRoutineTable) / sizeof (CARD_TYPE_DETECT_ROUTINE);
for (Index = 0; Index < RoutineNum; Index++) {
Routine = &mCardTypeDetectRoutineTable[Index];
if (*Routine != NULL) {
Status = (*Routine) (Private, Slot);
if (!EFI_ERROR (Status)) {
break;
}
}
}
}
//
// Enable 64-bit DMA support in the PCI layer if this controller
// supports it.
//
if (Support64BitDma) {
Status = PciIo->Attributes (
PciIo,
EfiPciIoAttributeOperationEnable,
EFI_PCI_IO_ATTRIBUTE_DUAL_ADDRESS_CYCLE,
NULL
);
if (EFI_ERROR (Status)) {
DEBUG ((DEBUG_WARN, "DwMmcHcDriverBindingStart: failed to enable 64-bit DMA (%r)\n", Status));
}
}
//
// Start the asynchronous I/O monitor
//
Status = gBS->CreateEvent (
EVT_TIMER | EVT_NOTIFY_SIGNAL,
TPL_NOTIFY,
ProcessAsyncTaskList,
Private,
&Private->TimerEvent
);
if (EFI_ERROR (Status)) {
goto Done;
}
Status = gBS->SetTimer (Private->TimerEvent, TimerPeriodic, DW_MMC_HC_ASYNC_TIMER);
if (EFI_ERROR (Status)) {
goto Done;
}
//
// Start the Sd removable device connection enumeration
//
Status = gBS->CreateEvent (
EVT_TIMER | EVT_NOTIFY_SIGNAL,
TPL_CALLBACK,
DwMmcHcEnumerateDevice,
Private,
&Private->ConnectEvent
);
if (EFI_ERROR (Status)) {
goto Done;
}
Status = gBS->SetTimer (Private->ConnectEvent, TimerPeriodic, DW_MMC_HC_ENUM_TIMER);
if (EFI_ERROR (Status)) {
goto Done;
}
Status = gBS->InstallMultipleProtocolInterfaces (
&Controller,
&gEfiSdMmcPassThruProtocolGuid,
&(Private->PassThru),
NULL
);
DEBUG ((DEBUG_INFO, "DwMmcHcDriverBindingStart: %r End on %x\n", Status, Controller));
Done:
if (EFI_ERROR (Status)) {
if ((Private != NULL) && (Private->PciAttributes != 0)) {
//
// Restore original PCI attributes
//
PciIo->Attributes (
PciIo,
EfiPciIoAttributeOperationSet,
Private->PciAttributes,
NULL
);
}
gBS->CloseProtocol (
Controller,
&gEfiPciIoProtocolGuid,
This->DriverBindingHandle,
Controller
);
if ((Private != NULL) && (Private->TimerEvent != NULL)) {
gBS->CloseEvent (Private->TimerEvent);
}
if ((Private != NULL) && (Private->ConnectEvent != NULL)) {
gBS->CloseEvent (Private->ConnectEvent);
}
if (Private != NULL) {
FreePool (Private);
}
}
return Status;
}
/**
Stops a device controller or a bus controller.
The Stop() function is designed to be invoked from the EFI boot service DisconnectController().
As a result, much of the error checking on the parameters to Stop() has been moved
into this common boot service. It is legal to call Stop() from other locations,
but the following calling restrictions must be followed or the system behavior will not be deterministic.
1. ControllerHandle must be a valid EFI_HANDLE that was used on a previous call to this
same driver's Start() function.
2. The first NumberOfChildren handles of ChildHandleBuffer must all be a valid
EFI_HANDLE. In addition, all of these handles must have been created in this driver's
Start() function, and the Start() function must have called OpenProtocol() on
ControllerHandle with an Attribute of EFI_OPEN_PROTOCOL_BY_CHILD_CONTROLLER.
@param[in] This A pointer to the EFI_DRIVER_BINDING_PROTOCOL instance.
@param[in] ControllerHandle A handle to the device being stopped. The handle must
support a bus specific I/O protocol for the driver
to use to stop the device.
@param[in] NumberOfChildren The number of child device handles in ChildHandleBuffer.
@param[in] ChildHandleBuffer An array of child handles to be freed. May be NULL
if NumberOfChildren is 0.
@retval EFI_SUCCESS The device was stopped.
@retval EFI_DEVICE_ERROR The device could not be stopped due to a device error.
**/
EFI_STATUS
EFIAPI
DwMmcHcDriverBindingStop (
IN EFI_DRIVER_BINDING_PROTOCOL *This,
IN EFI_HANDLE Controller,
IN UINTN NumberOfChildren,
IN EFI_HANDLE *ChildHandleBuffer
)
{
EFI_STATUS Status;
EFI_SD_MMC_PASS_THRU_PROTOCOL *PassThru;
DW_MMC_HC_PRIVATE_DATA *Private;
EFI_PCI_IO_PROTOCOL *PciIo;
LIST_ENTRY *Link;
LIST_ENTRY *NextLink;
DW_MMC_HC_TRB *Trb;
DEBUG ((DEBUG_INFO, "DwMmcHcDriverBindingStop: Start\n"));
Status = gBS->OpenProtocol (
Controller,
&gEfiSdMmcPassThruProtocolGuid,
(VOID**) &PassThru,
This->DriverBindingHandle,
Controller,
EFI_OPEN_PROTOCOL_GET_PROTOCOL
);
if (EFI_ERROR (Status)) {
return Status;
}
Private = DW_MMC_HC_PRIVATE_FROM_THIS (PassThru);
//
// Close Non-Blocking timer and free Task list.
//
if (Private->TimerEvent != NULL) {
gBS->CloseEvent (Private->TimerEvent);
Private->TimerEvent = NULL;
}
if (Private->ConnectEvent != NULL) {
gBS->CloseEvent (Private->ConnectEvent);
Private->ConnectEvent = NULL;
}
//
// As the timer is closed, there is no needs to use TPL lock to
// protect the critical region "queue".
//
for (Link = GetFirstNode (&Private->Queue);
!IsNull (&Private->Queue, Link);
Link = NextLink) {
NextLink = GetNextNode (&Private->Queue, Link);
RemoveEntryList (Link);
Trb = DW_MMC_HC_TRB_FROM_THIS (Link);
Trb->Packet->TransactionStatus = EFI_ABORTED;
gBS->SignalEvent (Trb->Event);
DwMmcFreeTrb (Trb);
}
//
// Uninstall Block I/O protocol from the device handle
//
Status = gBS->UninstallProtocolInterface (
Controller,
&gEfiSdMmcPassThruProtocolGuid,
&(Private->PassThru)
);
if (EFI_ERROR (Status)) {
return Status;
}
gBS->CloseProtocol (
Controller,
&gEfiPciIoProtocolGuid,
This->DriverBindingHandle,
Controller
);
//
// Restore original PCI attributes
//
PciIo = Private->PciIo;
Status = PciIo->Attributes (
PciIo,
EfiPciIoAttributeOperationSet,
Private->PciAttributes,
NULL
);
ASSERT_EFI_ERROR (Status);
FreePool (Private);
DEBUG ((DEBUG_INFO, "DwMmcHcDriverBindingStop: End with %r\n", Status));
return Status;
}
/**
Sends SD command to an SD card that is attached to the SD controller.
The PassThru() function sends the SD command specified by Packet to the SD card
specified by Slot.
If Packet is successfully sent to the SD card, then EFI_SUCCESS is returned.
If a device error occurs while sending the Packet, then EFI_DEVICE_ERROR is returned.
If Slot is not in a valid range for the SD controller, then EFI_INVALID_PARAMETER
is returned.
If Packet defines a data command but both InDataBuffer and OutDataBuffer are NULL,
EFI_INVALID_PARAMETER is returned.
@param[in] This A pointer to the EFI_SD_MMC_PASS_THRU_PROTOCOL instance.
@param[in] Slot The slot number of the SD card to send the command to.
@param[in,out] Packet A pointer to the SD command data structure.
@param[in] Event If Event is NULL, blocking I/O is performed. If Event is
not NULL, then nonblocking I/O is performed, and Event
will be signaled when the Packet completes.
@retval EFI_SUCCESS The SD Command Packet was sent by the host.
@retval EFI_DEVICE_ERROR A device error occurred while attempting to send the SD
command Packet.
@retval EFI_INVALID_PARAMETER Packet, Slot, or the contents of the Packet is invalid.
@retval EFI_INVALID_PARAMETER Packet defines a data command but both InDataBuffer and
OutDataBuffer are NULL.
@retval EFI_NO_MEDIA SD Device not present in the Slot.
@retval EFI_UNSUPPORTED The command described by the SD Command Packet is not
supported by the host controller.
@retval EFI_BAD_BUFFER_SIZE The InTransferLength or OutTransferLength exceeds the
limit supported by SD card ( i.e. if the number of bytes
exceed the Last LBA).
**/
EFI_STATUS
EFIAPI
DwMmcPassThruPassThru (
IN EFI_SD_MMC_PASS_THRU_PROTOCOL *This,
IN UINT8 Slot,
IN OUT EFI_SD_MMC_PASS_THRU_COMMAND_PACKET *Packet,
IN EFI_EVENT Event OPTIONAL
)
{
EFI_STATUS Status;
DW_MMC_HC_PRIVATE_DATA *Private;
DW_MMC_HC_TRB *Trb;
EFI_TPL OldTpl;
if ((This == NULL) || (Packet == NULL)) {
return EFI_INVALID_PARAMETER;
}
if ((Packet->SdMmcCmdBlk == NULL) || (Packet->SdMmcStatusBlk == NULL)) {
return EFI_INVALID_PARAMETER;
}
if ((Packet->OutDataBuffer == NULL) && (Packet->OutTransferLength != 0)) {
return EFI_INVALID_PARAMETER;
}
if ((Packet->InDataBuffer == NULL) && (Packet->InTransferLength != 0)) {
return EFI_INVALID_PARAMETER;
}
Private = DW_MMC_HC_PRIVATE_FROM_THIS (This);
if (!Private->Slot[Slot].Enable) {
return EFI_INVALID_PARAMETER;
}
if (!Private->Slot[Slot].MediaPresent) {
return EFI_NO_MEDIA;
}
Trb = DwMmcCreateTrb (Private, Slot, Packet, Event);
if (Trb == NULL) {
return EFI_OUT_OF_RESOURCES;
}
//
// Immediately return for async I/O.
//
if (Event != NULL) {
return EFI_SUCCESS;
}
//
// Wait async I/O list is empty before execute sync I/O operation.
//
while (TRUE) {
OldTpl = gBS->RaiseTPL (TPL_NOTIFY);
if (IsListEmpty (&Private->Queue)) {
gBS->RestoreTPL (OldTpl);
break;
}
gBS->RestoreTPL (OldTpl);
}
Status = DwMmcWaitTrbEnv (Private, Trb);
if (EFI_ERROR (Status)) {
goto Done;
}
Status = DwMmcExecTrb (Private, Trb);
if (EFI_ERROR (Status)) {
goto Done;
}
Status = DwMmcWaitTrbResult (Private, Trb);
if (EFI_ERROR (Status)) {
goto Done;
}
Done:
#if 0
if ((Trb != NULL) && (Trb->DmaDesc != NULL)) {
FreePages (Trb->DmaDesc, Trb->DmaDescPages);
}
if (Trb != NULL) {
FreePool (Trb);
}
#else
if (Trb != NULL) {
DwMmcFreeTrb (Trb);
}
#endif
return Status;
}
/**
Used to retrieve next slot numbers supported by the SD controller. The function
returns information about all available slots (populated or not-populated).
The GetNextSlot() function retrieves the next slot number on an SD controller.
If on input Slot is 0xFF, then the slot number of the first slot on the SD controller
is returned.
If Slot is a slot number that was returned on a previous call to GetNextSlot(), then
the slot number of the next slot on the SD controller is returned.
If Slot is not 0xFF and Slot was not returned on a previous call to GetNextSlot(),
EFI_INVALID_PARAMETER is returned.
If Slot is the slot number of the last slot on the SD controller, then EFI_NOT_FOUND
is returned.
@param[in] This A pointer to the EFI_SD_MMMC_PASS_THRU_PROTOCOL instance.
@param[in,out] Slot On input, a pointer to a slot number on the SD controller.
On output, a pointer to the next slot number on the SD controller.
An input value of 0xFF retrieves the first slot number on the SD
controller.
@retval EFI_SUCCESS The next slot number on the SD controller was returned in Slot.
@retval EFI_NOT_FOUND There are no more slots on this SD controller.
@retval EFI_INVALID_PARAMETER Slot is not 0xFF and Slot was not returned on a previous call
to GetNextSlot().
**/
EFI_STATUS
EFIAPI
DwMmcPassThruGetNextSlot (
IN EFI_SD_MMC_PASS_THRU_PROTOCOL *This,
IN OUT UINT8 *Slot
)
{
DW_MMC_HC_PRIVATE_DATA *Private;
UINT8 Index;
if ((This == NULL) || (Slot == NULL)) {
return EFI_INVALID_PARAMETER;
}
Private = DW_MMC_HC_PRIVATE_FROM_THIS (This);
if (*Slot == 0xFF) {
for (Index = 0; Index < DW_MMC_HC_MAX_SLOT; Index++) {
if (Private->Slot[Index].Enable) {
*Slot = Index;
Private->PreviousSlot = Index;
return EFI_SUCCESS;
}
}
return EFI_NOT_FOUND;
} else if (*Slot == Private->PreviousSlot) {
for (Index = *Slot + 1; Index < DW_MMC_HC_MAX_SLOT; Index++) {
if (Private->Slot[Index].Enable) {
*Slot = Index;
Private->PreviousSlot = Index;
return EFI_SUCCESS;
}
}
return EFI_NOT_FOUND;
} else {
return EFI_INVALID_PARAMETER;
}
}
/**
Used to allocate and build a device path node for an SD card on the SD controller.
The BuildDevicePath() function allocates and builds a single device node for the SD
card specified by Slot.
If the SD card specified by Slot is not present on the SD controller, then EFI_NOT_FOUND
is returned.
If DevicePath is NULL, then EFI_INVALID_PARAMETER is returned.
If there are not enough resources to allocate the device path node, then EFI_OUT_OF_RESOURCES
is returned.
Otherwise, DevicePath is allocated with the boot service AllocatePool(), the contents of
DevicePath are initialized to describe the SD card specified by Slot, and EFI_SUCCESS is
returned.
@param[in] This A pointer to the EFI_SD_MMMC_PASS_THRU_PROTOCOL instance.
@param[in] Slot Specifies the slot number of the SD card for which a device
path node is to be allocated and built.
@param[in,out] DevicePath A pointer to a single device path node that describes the SD
card specified by Slot. This function is responsible for
allocating the buffer DevicePath with the boot service
AllocatePool(). It is the caller's responsibility to free
DevicePath when the caller is finished with DevicePath.
@retval EFI_SUCCESS The device path node that describes the SD card specified by
Slot was allocated and returned in DevicePath.
@retval EFI_NOT_FOUND The SD card specified by Slot does not exist on the SD controller.
@retval EFI_INVALID_PARAMETER DevicePath is NULL.
@retval EFI_OUT_OF_RESOURCES There are not enough resources to allocate DevicePath.
**/
EFI_STATUS
EFIAPI
DwMmcPassThruBuildDevicePath (
IN EFI_SD_MMC_PASS_THRU_PROTOCOL *This,
IN UINT8 Slot,
IN OUT EFI_DEVICE_PATH_PROTOCOL **DevicePath
)
{
DW_MMC_HC_PRIVATE_DATA *Private;
SD_DEVICE_PATH *SdNode;
EMMC_DEVICE_PATH *EmmcNode;
if ((This == NULL) || (DevicePath == NULL) || (Slot >= DW_MMC_HC_MAX_SLOT)) {
return EFI_INVALID_PARAMETER;
}
Private = DW_MMC_HC_PRIVATE_FROM_THIS (This);
if ((!Private->Slot[Slot].Enable) || (!Private->Slot[Slot].MediaPresent)) {
return EFI_NOT_FOUND;
}
if (Private->Slot[Slot].CardType == SdCardType) {
SdNode = AllocateCopyPool (sizeof (SD_DEVICE_PATH), &mSdDpTemplate);
if (SdNode == NULL) {
return EFI_OUT_OF_RESOURCES;
}
SdNode->SlotNumber = Slot;
*DevicePath = (EFI_DEVICE_PATH_PROTOCOL *) SdNode;
} else if (Private->Slot[Slot].CardType == EmmcCardType) {
EmmcNode = AllocateCopyPool (sizeof (EMMC_DEVICE_PATH), &mEmmcDpTemplate);
if (EmmcNode == NULL) {
return EFI_OUT_OF_RESOURCES;
}
EmmcNode->SlotNumber = Slot;
*DevicePath = (EFI_DEVICE_PATH_PROTOCOL *) EmmcNode;
} else {
//
// Currently we only support SD and EMMC two device nodes.
//
return EFI_NOT_FOUND;
}
return EFI_SUCCESS;
}
/**
This function retrieves an SD card slot number based on the input device path.
The GetSlotNumber() function retrieves slot number for the SD card specified by
the DevicePath node. If DevicePath is NULL, EFI_INVALID_PARAMETER is returned.
If DevicePath is not a device path node type that the SD Pass Thru driver supports,
EFI_UNSUPPORTED is returned.
@param[in] This A pointer to the EFI_SD_MMC_PASS_THRU_PROTOCOL instance.
@param[in] DevicePath A pointer to the device path node that describes a SD
card on the SD controller.
@param[out] Slot On return, points to the slot number of an SD card on
the SD controller.
@retval EFI_SUCCESS SD card slot number is returned in Slot.
@retval EFI_INVALID_PARAMETER Slot or DevicePath is NULL.
@retval EFI_UNSUPPORTED DevicePath is not a device path node type that the SD
Pass Thru driver supports.
**/
EFI_STATUS
EFIAPI
DwMmcPassThruGetSlotNumber (
IN EFI_SD_MMC_PASS_THRU_PROTOCOL *This,
IN EFI_DEVICE_PATH_PROTOCOL *DevicePath,
OUT UINT8 *Slot
)
{
DW_MMC_HC_PRIVATE_DATA *Private;
SD_DEVICE_PATH *SdNode;
EMMC_DEVICE_PATH *EmmcNode;
UINT8 SlotNumber;
if ((This == NULL) || (DevicePath == NULL) || (Slot == NULL)) {
return EFI_INVALID_PARAMETER;
}
Private = DW_MMC_HC_PRIVATE_FROM_THIS (This);
//
// Check whether the DevicePath belongs to SD_DEVICE_PATH or EMMC_DEVICE_PATH
//
if ((DevicePath->Type != MESSAGING_DEVICE_PATH) ||
((DevicePath->SubType != MSG_SD_DP) &&
(DevicePath->SubType != MSG_EMMC_DP)) ||
(DevicePathNodeLength(DevicePath) != sizeof(SD_DEVICE_PATH)) ||
(DevicePathNodeLength(DevicePath) != sizeof(EMMC_DEVICE_PATH))) {
return EFI_UNSUPPORTED;
}
if (DevicePath->SubType == MSG_SD_DP) {
SdNode = (SD_DEVICE_PATH *) DevicePath;
SlotNumber = SdNode->SlotNumber;
} else {
EmmcNode = (EMMC_DEVICE_PATH *) DevicePath;
SlotNumber = EmmcNode->SlotNumber;
}
if (SlotNumber >= DW_MMC_HC_MAX_SLOT) {
return EFI_NOT_FOUND;
}
if (Private->Slot[SlotNumber].Enable) {
*Slot = SlotNumber;
return EFI_SUCCESS;
} else {
return EFI_NOT_FOUND;
}
}
/**
Resets an SD card that is connected to the SD controller.
The ResetDevice() function resets the SD card specified by Slot.
If this SD controller does not support a device reset operation, EFI_UNSUPPORTED is
returned.
If Slot is not in a valid slot number for this SD controller, EFI_INVALID_PARAMETER
is returned.
If the device reset operation is completed, EFI_SUCCESS is returned.
@param[in] This A pointer to the EFI_SD_MMC_PASS_THRU_PROTOCOL instance.
@param[in] Slot Specifies the slot number of the SD card to be reset.
@retval EFI_SUCCESS The SD card specified by Slot was reset.
@retval EFI_UNSUPPORTED The SD controller does not support a device reset operation.
@retval EFI_INVALID_PARAMETER Slot number is invalid.
@retval EFI_NO_MEDIA SD Device not present in the Slot.
@retval EFI_DEVICE_ERROR The reset command failed due to a device error
**/
EFI_STATUS
EFIAPI
DwMmcPassThruResetDevice (
IN EFI_SD_MMC_PASS_THRU_PROTOCOL *This,
IN UINT8 Slot
)
{
DW_MMC_HC_PRIVATE_DATA *Private;
LIST_ENTRY *Link;
LIST_ENTRY *NextLink;
DW_MMC_HC_TRB *Trb;
EFI_TPL OldTpl;
if (This == NULL) {
return EFI_INVALID_PARAMETER;
}
Private = DW_MMC_HC_PRIVATE_FROM_THIS (This);
if (!Private->Slot[Slot].Enable) {
return EFI_INVALID_PARAMETER;
}
if (!Private->Slot[Slot].MediaPresent) {
return EFI_NO_MEDIA;
}
//
// Free all async I/O requests in the queue
//
OldTpl = gBS->RaiseTPL (TPL_NOTIFY);
for (Link = GetFirstNode (&Private->Queue);
!IsNull (&Private->Queue, Link);
Link = NextLink) {
NextLink = GetNextNode (&Private->Queue, Link);
RemoveEntryList (Link);
Trb = DW_MMC_HC_TRB_FROM_THIS (Link);
Trb->Packet->TransactionStatus = EFI_ABORTED;
gBS->SignalEvent (Trb->Event);
DwMmcFreeTrb (Trb);
}
gBS->RestoreTPL (OldTpl);
return EFI_SUCCESS;
}