/*
* Copyright (C) 2016 The Android Open Source Project
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
#include "Thumbnail.h"
#define LOG_NDEBUG 0
#define LOG_TAG "EmulatedCamera_Thumbnail"
#include <cutils/log.h>
#include <libexif/exif-data.h>
#include <libyuv.h>
#include "JpegCompressor.h"
#include <vector>
/*
* The NV21 format is a YUV format with an 8-bit Y-component and the U and V
* components are stored as 8 bits each but they are shared between a block of
* 2x2 pixels. So when calculating bits per pixel the 16 bits of U and V are
* shared between 4 pixels leading to 4 bits of U and V per pixel. Together
* with the 8 bits of Y this gives us 12 bits per pixel..
*
* The components are not grouped by pixels but separated into one Y-plane and
* one interleaved U and V-plane. The first half of the byte sequence is all of
* the Y data laid out in a linear fashion. After that the interleaved U and V-
* plane starts with one byte of V followed by one byte of U followed by one
* byte of V and so on. Each byte of U or V is associated with a 2x2 pixel block
* in a linear fashion.
*
* For an 8 by 4 pixel image the layout would be:
*
* +-----+-----+-----+-----+-----+-----+-----+-----+
* | Y0 | Y1 | Y2 | Y3 | Y4 | Y5 | Y6 | Y7 |
* +-----+-----+-----+-----+-----+-----+-----+-----+
* | Y8 | Y9 | Y10 | Y11 | Y12 | Y13 | Y14 | Y15 |
* +-----+-----+-----+-----+-----+-----+-----+-----+
* | Y16 | Y17 | Y18 | Y19 | Y20 | Y21 | Y22 | Y23 |
* +-----+-----+-----+-----+-----+-----+-----+-----+
* | Y24 | Y25 | Y26 | Y27 | Y28 | Y29 | Y30 | Y31 |
* +-----+-----+-----+-----+-----+-----+-----+-----+
* | V0 | U0 | V1 | U1 | V2 | U2 | V3 | U3 |
* +-----+-----+-----+-----+-----+-----+-----+-----+
* | V4 | U4 | V5 | U5 | V6 | U6 | V7 | U7 |
* +-----+-----+-----+-----+-----+-----+-----+-----+
*
* In this image V0 and U0 are the V and U components for the 2x2 block of
* pixels whose Y components are Y0, Y1, Y8 and Y9. V1 and U1 are matched with
* the Y components Y2, Y3, Y10, Y11, and so on for that row. For the next row
* of V and U the V4 and U4 components would be paired with Y16, Y17, Y24 and
* Y25.
*/
namespace android {
static bool createRawThumbnail(const unsigned char* sourceImage,
int sourceWidth, int sourceHeight,
int thumbnailWidth, int thumbnailHeight,
std::vector<unsigned char>* thumbnail) {
// Deinterleave the U and V planes into separate planes, this is because
// libyuv requires the planes to be separate when scaling
const size_t sourceUVPlaneSize = (sourceWidth * sourceHeight) / 4;
// Put both U and V planes in one buffer, one after the other, to reduce
// memory fragmentation and number of allocations
std::vector<unsigned char> sourcePlanes(sourceUVPlaneSize * 2);
const unsigned char* ySourcePlane = sourceImage;
unsigned char* uSourcePlane = &sourcePlanes[0];
unsigned char* vSourcePlane = &sourcePlanes[sourceUVPlaneSize];
for (size_t i = 0; i < sourceUVPlaneSize; ++i) {
vSourcePlane[i] = sourceImage[sourceWidth * sourceHeight + i * 2 + 0];
uSourcePlane[i] = sourceImage[sourceWidth * sourceHeight + i * 2 + 1];
}
// Create enough space in the output vector for the result
thumbnail->resize((thumbnailWidth * thumbnailHeight * 12) / 8);
// The downscaled U and V planes will also be linear instead of interleaved,
// allocate space for them here
const size_t destUVPlaneSize = (thumbnailWidth * thumbnailHeight) / 4;
std::vector<unsigned char> destPlanes(destUVPlaneSize * 2);
unsigned char* yDestPlane = &(*thumbnail)[0];
unsigned char* uDestPlane = &destPlanes[0];
unsigned char* vDestPlane = &destPlanes[destUVPlaneSize];
// The strides for the U and V planes are half the width because the U and V
// components are common to 2x2 pixel blocks
int result = libyuv::I420Scale(ySourcePlane, sourceWidth,
uSourcePlane, sourceWidth / 2,
vSourcePlane, sourceWidth / 2,
sourceWidth, sourceHeight,
yDestPlane, thumbnailWidth,
uDestPlane, thumbnailWidth / 2,
vDestPlane, thumbnailWidth / 2,
thumbnailWidth, thumbnailHeight,
libyuv::kFilterBilinear);
if (result != 0) {
ALOGE("Unable to create thumbnail, downscaling failed with error: %d",
result);
return false;
}
// Now we need to interleave the downscaled U and V planes into the
// output buffer to make it NV21 encoded
const size_t uvPlanesOffset = thumbnailWidth * thumbnailHeight;
for (size_t i = 0; i < destUVPlaneSize; ++i) {
(*thumbnail)[uvPlanesOffset + i * 2 + 0] = vDestPlane[i];
(*thumbnail)[uvPlanesOffset + i * 2 + 1] = uDestPlane[i];
}
return true;
}
bool createThumbnail(const unsigned char* sourceImage,
int sourceWidth, int sourceHeight,
int thumbWidth, int thumbHeight, int quality,
ExifData* exifData) {
if (thumbWidth <= 0 || thumbHeight <= 0) {
ALOGE("%s: Invalid thumbnail width=%d or height=%d, must be > 0",
__FUNCTION__, thumbWidth, thumbHeight);
return false;
}
// First downscale the source image into a thumbnail-sized raw image
std::vector<unsigned char> rawThumbnail;
if (!createRawThumbnail(sourceImage, sourceWidth, sourceHeight,
thumbWidth, thumbHeight, &rawThumbnail)) {
// The thumbnail function will log an appropriate error if needed
return false;
}
// And then compress it into JPEG format without any EXIF data
NV21JpegCompressor compressor;
status_t result = compressor.compressRawImage(&rawThumbnail[0],
nullptr /* EXIF */,
quality, thumbWidth, thumbHeight);
if (result != NO_ERROR) {
ALOGE("%s: Unable to compress thumbnail", __FUNCTION__);
return false;
}
// And finally put it in the EXIF data. This transfers ownership of the
// malloc'd memory to the EXIF data structure. As long as the EXIF data
// structure is free'd using the EXIF library this memory will be free'd.
exifData->size = compressor.getCompressedSize();
exifData->data = reinterpret_cast<unsigned char*>(malloc(exifData->size));
if (exifData->data == nullptr) {
ALOGE("%s: Unable to allocate %u bytes of memory for thumbnail",
__FUNCTION__, exifData->size);
exifData->size = 0;
return false;
}
compressor.getCompressedImage(exifData->data);
return true;
}
} // namespace android