/** @file
*
* PXE UDP API
*
*/
#include <string.h>
#include <byteswap.h>
#include <gpxe/xfer.h>
#include <gpxe/udp.h>
#include <gpxe/uaccess.h>
#include <gpxe/process.h>
#include <pxe.h>
/*
* Copyright (C) 2004 Michael Brown <mbrown@fensystems.co.uk>.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of the
* License, or any later version.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
FILE_LICENCE ( GPL2_OR_LATER );
/** A PXE UDP connection */
struct pxe_udp_connection {
/** Data transfer interface to UDP stack */
struct xfer_interface xfer;
/** Local address */
struct sockaddr_in local;
/** Current PXENV_UDP_READ parameter block */
struct s_PXENV_UDP_READ *pxenv_udp_read;
};
/**
* Receive PXE UDP data
*
* @v xfer Data transfer interface
* @v iobuf I/O buffer
* @v meta Data transfer metadata
* @ret rc Return status code
*
* Receives a packet as part of the current pxenv_udp_read()
* operation.
*/
static int pxe_udp_deliver_iob ( struct xfer_interface *xfer,
struct io_buffer *iobuf,
struct xfer_metadata *meta ) {
struct pxe_udp_connection *pxe_udp =
container_of ( xfer, struct pxe_udp_connection, xfer );
struct s_PXENV_UDP_READ *pxenv_udp_read = pxe_udp->pxenv_udp_read;
struct sockaddr_in *sin_src;
struct sockaddr_in *sin_dest;
userptr_t buffer;
size_t len;
int rc = 0;
if ( ! pxenv_udp_read ) {
DBG ( "PXE discarded UDP packet\n" );
rc = -ENOBUFS;
goto done;
}
/* Copy packet to buffer and record length */
buffer = real_to_user ( pxenv_udp_read->buffer.segment,
pxenv_udp_read->buffer.offset );
len = iob_len ( iobuf );
if ( len > pxenv_udp_read->buffer_size )
len = pxenv_udp_read->buffer_size;
copy_to_user ( buffer, 0, iobuf->data, len );
pxenv_udp_read->buffer_size = len;
/* Fill in source/dest information */
assert ( meta );
sin_src = ( struct sockaddr_in * ) meta->src;
assert ( sin_src );
assert ( sin_src->sin_family == AF_INET );
pxenv_udp_read->src_ip = sin_src->sin_addr.s_addr;
pxenv_udp_read->s_port = sin_src->sin_port;
sin_dest = ( struct sockaddr_in * ) meta->dest;
assert ( sin_dest );
assert ( sin_dest->sin_family == AF_INET );
pxenv_udp_read->dest_ip = sin_dest->sin_addr.s_addr;
pxenv_udp_read->d_port = sin_dest->sin_port;
/* Mark as received */
pxe_udp->pxenv_udp_read = NULL;
done:
free_iob ( iobuf );
return rc;
}
/** PXE UDP data transfer interface operations */
static struct xfer_interface_operations pxe_udp_xfer_operations = {
.close = ignore_xfer_close,
.vredirect = ignore_xfer_vredirect,
.window = unlimited_xfer_window,
.alloc_iob = default_xfer_alloc_iob,
.deliver_iob = pxe_udp_deliver_iob,
.deliver_raw = xfer_deliver_as_iob,
};
/** The PXE UDP connection */
static struct pxe_udp_connection pxe_udp = {
.xfer = XFER_INIT ( &pxe_udp_xfer_operations ),
.local = {
.sin_family = AF_INET,
},
};
/**
* UDP OPEN
*
* @v pxenv_udp_open Pointer to a struct s_PXENV_UDP_OPEN
* @v s_PXENV_UDP_OPEN::src_ip IP address of this station, or 0.0.0.0
* @ret #PXENV_EXIT_SUCCESS Always
* @ret s_PXENV_UDP_OPEN::Status PXE status code
* @err #PXENV_STATUS_UDP_OPEN UDP connection already open
* @err #PXENV_STATUS_OUT_OF_RESOURCES Could not open connection
*
* Prepares the PXE stack for communication using pxenv_udp_write()
* and pxenv_udp_read().
*
* The IP address supplied in s_PXENV_UDP_OPEN::src_ip will be
* recorded and used as the local station's IP address for all further
* communication, including communication by means other than
* pxenv_udp_write() and pxenv_udp_read(). (If
* s_PXENV_UDP_OPEN::src_ip is 0.0.0.0, the local station's IP address
* will remain unchanged.)
*
* You can only have one open UDP connection at a time. This is not a
* meaningful restriction, since pxenv_udp_write() and
* pxenv_udp_read() allow you to specify arbitrary local and remote
* ports and an arbitrary remote address for each packet. According
* to the PXE specifiation, you cannot have a UDP connection open at
* the same time as a TFTP connection; this restriction does not apply
* to Etherboot.
*
* On x86, you must set the s_PXE::StatusCallout field to a nonzero
* value before calling this function in protected mode. You cannot
* call this function with a 32-bit stack segment. (See the relevant
* @ref pxe_x86_pmode16 "implementation note" for more details.)
*
* @note The PXE specification does not make it clear whether the IP
* address supplied in s_PXENV_UDP_OPEN::src_ip should be used only
* for this UDP connection, or retained for all future communication.
* The latter seems more consistent with typical PXE stack behaviour.
*
* @note Etherboot currently ignores the s_PXENV_UDP_OPEN::src_ip
* parameter.
*
*/
PXENV_EXIT_t pxenv_udp_open ( struct s_PXENV_UDP_OPEN *pxenv_udp_open ) {
int rc;
DBG ( "PXENV_UDP_OPEN" );
/* Record source IP address */
pxe_udp.local.sin_addr.s_addr = pxenv_udp_open->src_ip;
DBG ( " %s", inet_ntoa ( pxe_udp.local.sin_addr ) );
/* Open promiscuous UDP connection */
xfer_close ( &pxe_udp.xfer, 0 );
if ( ( rc = udp_open_promisc ( &pxe_udp.xfer ) ) != 0 ) {
pxenv_udp_open->Status = PXENV_STATUS ( rc );
return PXENV_EXIT_FAILURE;
}
pxenv_udp_open->Status = PXENV_STATUS_SUCCESS;
return PXENV_EXIT_SUCCESS;
}
/**
* UDP CLOSE
*
* @v pxenv_udp_close Pointer to a struct s_PXENV_UDP_CLOSE
* @ret #PXENV_EXIT_SUCCESS Always
* @ret s_PXENV_UDP_CLOSE::Status PXE status code
* @err None -
*
* Closes a UDP connection opened with pxenv_udp_open().
*
* You can only have one open UDP connection at a time. You cannot
* have a UDP connection open at the same time as a TFTP connection.
* You cannot use pxenv_udp_close() to close a TFTP connection; use
* pxenv_tftp_close() instead.
*
* On x86, you must set the s_PXE::StatusCallout field to a nonzero
* value before calling this function in protected mode. You cannot
* call this function with a 32-bit stack segment. (See the relevant
* @ref pxe_x86_pmode16 "implementation note" for more details.)
*
*/
PXENV_EXIT_t pxenv_udp_close ( struct s_PXENV_UDP_CLOSE *pxenv_udp_close ) {
DBG ( "PXENV_UDP_CLOSE" );
/* Close UDP connection */
xfer_close ( &pxe_udp.xfer, 0 );
pxenv_udp_close->Status = PXENV_STATUS_SUCCESS;
return PXENV_EXIT_SUCCESS;
}
/**
* UDP WRITE
*
* @v pxenv_udp_write Pointer to a struct s_PXENV_UDP_WRITE
* @v s_PXENV_UDP_WRITE::ip Destination IP address
* @v s_PXENV_UDP_WRITE::gw Relay agent IP address, or 0.0.0.0
* @v s_PXENV_UDP_WRITE::src_port Source UDP port, or 0
* @v s_PXENV_UDP_WRITE::dst_port Destination UDP port
* @v s_PXENV_UDP_WRITE::buffer_size Length of the UDP payload
* @v s_PXENV_UDP_WRITE::buffer Address of the UDP payload
* @ret #PXENV_EXIT_SUCCESS Packet was transmitted successfully
* @ret #PXENV_EXIT_FAILURE Packet could not be transmitted
* @ret s_PXENV_UDP_WRITE::Status PXE status code
* @err #PXENV_STATUS_UDP_CLOSED UDP connection is not open
* @err #PXENV_STATUS_UNDI_TRANSMIT_ERROR Could not transmit packet
*
* Transmits a single UDP packet. A valid IP and UDP header will be
* prepended to the payload in s_PXENV_UDP_WRITE::buffer; the buffer
* should not contain precomputed IP and UDP headers, nor should it
* contain space allocated for these headers. The first byte of the
* buffer will be transmitted as the first byte following the UDP
* header.
*
* If s_PXENV_UDP_WRITE::gw is 0.0.0.0, normal IP routing will take
* place. See the relevant @ref pxe_routing "implementation note" for
* more details.
*
* If s_PXENV_UDP_WRITE::src_port is 0, port 2069 will be used.
*
* You must have opened a UDP connection with pxenv_udp_open() before
* calling pxenv_udp_write().
*
* On x86, you must set the s_PXE::StatusCallout field to a nonzero
* value before calling this function in protected mode. You cannot
* call this function with a 32-bit stack segment. (See the relevant
* @ref pxe_x86_pmode16 "implementation note" for more details.)
*
* @note Etherboot currently ignores the s_PXENV_UDP_WRITE::gw
* parameter.
*
*/
PXENV_EXIT_t pxenv_udp_write ( struct s_PXENV_UDP_WRITE *pxenv_udp_write ) {
struct sockaddr_in dest;
struct xfer_metadata meta = {
.src = ( struct sockaddr * ) &pxe_udp.local,
.dest = ( struct sockaddr * ) &dest,
.netdev = pxe_netdev,
};
size_t len;
struct io_buffer *iobuf;
userptr_t buffer;
int rc;
DBG ( "PXENV_UDP_WRITE" );
/* Construct destination socket address */
memset ( &dest, 0, sizeof ( dest ) );
dest.sin_family = AF_INET;
dest.sin_addr.s_addr = pxenv_udp_write->ip;
dest.sin_port = pxenv_udp_write->dst_port;
/* Set local (source) port. PXE spec says source port is 2069
* if not specified. Really, this ought to be set at UDP open
* time but hey, we didn't design this API.
*/
pxe_udp.local.sin_port = pxenv_udp_write->src_port;
if ( ! pxe_udp.local.sin_port )
pxe_udp.local.sin_port = htons ( 2069 );
/* FIXME: we ignore the gateway specified, since we're
* confident of being able to do our own routing. We should
* probably allow for multiple gateways.
*/
/* Allocate and fill data buffer */
len = pxenv_udp_write->buffer_size;
iobuf = xfer_alloc_iob ( &pxe_udp.xfer, len );
if ( ! iobuf ) {
pxenv_udp_write->Status = PXENV_STATUS_OUT_OF_RESOURCES;
return PXENV_EXIT_FAILURE;
}
buffer = real_to_user ( pxenv_udp_write->buffer.segment,
pxenv_udp_write->buffer.offset );
copy_from_user ( iob_put ( iobuf, len ), buffer, 0, len );
DBG ( " %04x:%04x+%x %d->%s:%d", pxenv_udp_write->buffer.segment,
pxenv_udp_write->buffer.offset, pxenv_udp_write->buffer_size,
ntohs ( pxenv_udp_write->src_port ),
inet_ntoa ( dest.sin_addr ),
ntohs ( pxenv_udp_write->dst_port ) );
/* Transmit packet */
if ( ( rc = xfer_deliver_iob_meta ( &pxe_udp.xfer, iobuf,
&meta ) ) != 0 ) {
pxenv_udp_write->Status = PXENV_STATUS ( rc );
return PXENV_EXIT_FAILURE;
}
pxenv_udp_write->Status = PXENV_STATUS_SUCCESS;
return PXENV_EXIT_SUCCESS;
}
/**
* UDP READ
*
* @v pxenv_udp_read Pointer to a struct s_PXENV_UDP_READ
* @v s_PXENV_UDP_READ::dest_ip Destination IP address, or 0.0.0.0
* @v s_PXENV_UDP_READ::d_port Destination UDP port, or 0
* @v s_PXENV_UDP_READ::buffer_size Size of the UDP payload buffer
* @v s_PXENV_UDP_READ::buffer Address of the UDP payload buffer
* @ret #PXENV_EXIT_SUCCESS A packet has been received
* @ret #PXENV_EXIT_FAILURE No packet has been received
* @ret s_PXENV_UDP_READ::Status PXE status code
* @ret s_PXENV_UDP_READ::src_ip Source IP address
* @ret s_PXENV_UDP_READ::dest_ip Destination IP address
* @ret s_PXENV_UDP_READ::s_port Source UDP port
* @ret s_PXENV_UDP_READ::d_port Destination UDP port
* @ret s_PXENV_UDP_READ::buffer_size Length of UDP payload
* @err #PXENV_STATUS_UDP_CLOSED UDP connection is not open
* @err #PXENV_STATUS_FAILURE No packet was ready to read
*
* Receive a single UDP packet. This is a non-blocking call; if no
* packet is ready to read, the call will return instantly with
* s_PXENV_UDP_READ::Status==PXENV_STATUS_FAILURE.
*
* If s_PXENV_UDP_READ::dest_ip is 0.0.0.0, UDP packets addressed to
* any IP address will be accepted and may be returned to the caller.
*
* If s_PXENV_UDP_READ::d_port is 0, UDP packets addressed to any UDP
* port will be accepted and may be returned to the caller.
*
* You must have opened a UDP connection with pxenv_udp_open() before
* calling pxenv_udp_read().
*
* On x86, you must set the s_PXE::StatusCallout field to a nonzero
* value before calling this function in protected mode. You cannot
* call this function with a 32-bit stack segment. (See the relevant
* @ref pxe_x86_pmode16 "implementation note" for more details.)
*
* @note The PXE specification (version 2.1) does not state that we
* should fill in s_PXENV_UDP_READ::dest_ip and
* s_PXENV_UDP_READ::d_port, but Microsoft Windows' NTLDR program
* expects us to do so, and will fail if we don't.
*
*/
PXENV_EXIT_t pxenv_udp_read ( struct s_PXENV_UDP_READ *pxenv_udp_read ) {
struct in_addr dest_ip_wanted = { .s_addr = pxenv_udp_read->dest_ip };
struct in_addr dest_ip;
uint16_t d_port_wanted = pxenv_udp_read->d_port;
uint16_t d_port;
DBG ( "PXENV_UDP_READ" );
/* Try receiving a packet */
pxe_udp.pxenv_udp_read = pxenv_udp_read;
step();
if ( pxe_udp.pxenv_udp_read ) {
/* No packet received */
pxe_udp.pxenv_udp_read = NULL;
goto no_packet;
}
dest_ip.s_addr = pxenv_udp_read->dest_ip;
d_port = pxenv_udp_read->d_port;
/* Filter on destination address and/or port */
if ( dest_ip_wanted.s_addr &&
( dest_ip_wanted.s_addr != dest_ip.s_addr ) ) {
DBG ( " wrong IP %s", inet_ntoa ( dest_ip ) );
DBG ( " (wanted %s)", inet_ntoa ( dest_ip_wanted ) );
goto no_packet;
}
if ( d_port_wanted && ( d_port_wanted != d_port ) ) {
DBG ( " wrong port %d ", htons ( d_port ) );
DBG ( " (wanted %d)", htons ( d_port_wanted ) );
goto no_packet;
}
DBG ( " %04x:%04x+%x %s:", pxenv_udp_read->buffer.segment,
pxenv_udp_read->buffer.offset, pxenv_udp_read->buffer_size,
inet_ntoa ( *( ( struct in_addr * ) &pxenv_udp_read->src_ip ) ));
DBG ( "%d<-%s:%d", ntohs ( pxenv_udp_read->s_port ),
inet_ntoa ( *( ( struct in_addr * ) &pxenv_udp_read->dest_ip ) ),
ntohs ( pxenv_udp_read->d_port ) );
pxenv_udp_read->Status = PXENV_STATUS_SUCCESS;
return PXENV_EXIT_SUCCESS;
no_packet:
pxenv_udp_read->Status = PXENV_STATUS_FAILURE;
return PXENV_EXIT_FAILURE;
}